J-D series plunger metering pump, J-D series plunger metering pump manufacturer Shanghai Hongdong Pump Manufacturing Co., Ltd
National service hotline: 021-56633982
  •  J-D series plunger metering pump

J-D series plunger metering pump

  • Category: metering pump
  • Product name: J-D series plunger metering pump
  • Product label: J-D series plunger metering pump manufacturer
  • Updated: 2021/5/13 16:20:52
  • Access statistics:
  • Measurement range: 0-3000L/H

    Pressure bearing range :0-50MPa

    Drive mode: motor drive

    Control mode: Manual and automatic control (can receive 4-20mA signal to adjust flow)

    Configuration mode: pump head insulation, cooling, explosion-proof motor

    1. The parts in direct contact with the medium are all made of stainless steel and tetrafluoro. Overflow is suitable for ordinary particles, non-toxic and tasteless.

    2. Double pump head structure, economical and practical, small footprint, superior performance.

    3. All vulnerable parts are subject to special treatment and quality assurance.

    4. The internal configuration of the regulator assembly with excellent performance extends the service life of the pump and reduces the noise.

    5. Quantitative output, when the pump is running or stopped, the flow can be adjusted at will, and the precision can reach plus or minus one percent.

    6. It is suitable for conveying medium with temperature of - 30~120 ℃ and viscosity of 0.3~800mm2/s.

    Metering pump head: SUS304, SUS316 Ambient temperature: - 30 ℃ - - 90 ℃
    Metering valve: SUS304, SUS316 Motor: two-phase, three-phase standard motor or explosion-proof motor
    Valve ball: silicon dioxide, SUS304, SUS316, ceramics, zirconia Power: 0.75KW 1.1KW 1.5KW
    Seal: PTFE Protection grade: IP55
    Model (MODE) Flow (L/H) Pressure (Mpa) Stroke (MM) Pump speed (MIN-1) Power (KW) Inlet diameter (MM) Weight (KG)
    J-D 25/50 twenty-five fifty forty one hundred and twelve four thirteen one hundred and fifty
    J-D 25/32 twenty-five thirty-two two point two
    J-D 45/45 forty-five forty-five four
    J-D 45/25 forty-five twenty-five two point two
    J-D 70/40 seventy forty four
    J-D 70/35 seventy thirty-five two point two
    J-D 100/35 one hundred thirty-five four
    J-D 100/28 one hundred twenty-eight four
    J-D 125/32 one hundred and twenty-five thirty-two four
    J-D 125/26 one hundred and twenty-five twenty-six four seventeen
    J-D 180/20 one hundred and eighty twenty four
    J-D 180/10 one hundred and eighty ten two point two
    J-D 300/15 three hundred fifteen four
    J-D 300/10 three hundred ten two point two
    J-D 450/10 four hundred and fifty ten four
    J-D 450/8 four hundred and fifty eight four
    J-D 650/4 six hundred and fifty four two point two
    J-D 650/2 six hundred and fifty two two point two
    J-D 1000/2 one thousand two two point two
    J-D 1000/1 one thousand one two point two thirty-four
    J-D 1200/1.5 one thousand and two hundred one point five two point two
    J-D 1200/0.8 one thousand and two hundred zero point eight two point two
    J-D 2000/1.0 two thousand one four
    J-D 2500/1.0 two thousand and five hundred one four
    J-D 3000/1.0 three thousand one four

    Product line

    Our website fully supports the relevant regulations on "limiting prohibited words" implemented in the Advertising Law of the People's Republic of China, and has tried to avoid the use of "prohibited words". Therefore, from now on, any page of this website that contains words or pictures that limit the introduction of "prohibited words" is not the subjective intention of this website and will be invalid immediately, and cannot be used as a reference for any behavior of customers. All visitors who visit this website agree with this treaty! Thanks for your cooperation!

    Service hotline

    021-56633982

    021-66287771

    021-56908228

     Scan and add WeChat