The School of Mechanical and Automotive Engineering of South China University of Technology, located in Guangzhou, Guangdong Province, was founded in January 2008 byCollege of Mechanical Engineering, Industrial Equipment and Control Engineering College, and Automotive Engineering College were merged and established. It is the second level management unit of South China University of Technology, and is the first group in China that has the right to grant master's and doctoral degreesPostdoctoral mobile stationOne of the disciplines of.
Chinese name
School of Mechanical and Automotive Engineering, South China University of Technology
Time of establishment
January 2008
School motto
Knowledgeable, thoughtful, discerning and practical
Organization
President, Secretary of the Party Committee, Vice President
Industrial Training Center
Large teaching model of Mercedes Benz transmission system
The college consists of teaching and scientific research administrative institutions such as the Department of Mechanical Manufacturing Engineering, the Department of Mechanical and Electronic Engineering, the Department of Mechanics, the Department of Automotive Engineering, the Department of Industrial Equipment and Control Engineering, the Institute of Advanced Manufacturing Technology and Equipment for Polymer Materials, the Institute of Metal Material Preparation and Forming and Equipment, and the Engineering Training Center.There are nine innovation research centers, including polymer intelligent manufacturing, precision equipment and intelligent robots, intelligent electric vehicles, industrial artificial intelligence, intelligent measurement and control and high-end equipment, laser and additive manufacturing, high-performance manufacturing of functional structures and devices, industrial software, intelligent safety and emergency innovation.It has nearly 40000 square meters of teaching, scientific research and office space, and nearly 20000 scientific instruments and equipment.It has two national engineering research centers, one national engineering laboratory, two national and local joint engineering laboratories, 22 provincial and ministerial scientific research bases, and three national experimental teaching demonstration centers.[11]
Teachers
The college has 293 faculty members, including 88 professors.It has 2 innovation teams of the Ministry of Education, 1 academician of the Chinese Academy of Engineering, 1 national famous teacher, 2 winners of the National Science Fund for Distinguished Young Scholars, 1 winner of the National Science Fund for Distinguished Young Scholars, 1 national model teacher, 3 national candidates for the Hundred Thousand Talents Project, and 12 "trans (new) century talents" of the Ministry of Education,There are 2 winners of the National Natural Science Foundation for Distinguished Young Scientists (overseas) program, 1 distinguished expert, 1 national scientific and technological innovation leader, and 1 national youth top talent.[11]
Teaching construction
The college has mechanical engineering (national first-class undergraduate specialty construction site, national characteristic specialty, Guangdong famous brand specialty), mechanical and electronic engineering (national first-class undergraduate specialty construction site, Guangdong famous brand specialty), vehicle engineering (provincial first-class undergraduate specialty construction site), process equipment and control engineering (national first-class undergraduate specialty construction site)There are six undergraduate majors, namely, material forming and control engineering (provincial first-class undergraduate specialty construction site), safety engineering (national first-class undergraduate specialty construction site), and two characteristic classes, namely, mechanical innovation class (bachelor degree, master degree, doctoral degree) and mechanical engineering (excellent bilingual class).As of June 2023, the college has successfully passed the certification of Chinese engineering education in three majors: mechanical engineering, vehicle engineering and safety engineering.There are more than 2200 full-time undergraduates.[11]
Discipline construction
The college has 3 post doctoral stations in mechanical engineering, material science and engineering, power engineering and engineering thermophysics;It has three first level doctoral degree authorization points in mechanical engineering, material science and engineering, power engineering and engineering thermophysics;Four academic master's degree authorization points: mechanical engineering, material science and engineering, power engineering and engineering thermophysics, safety science and engineering;3 engineering doctor degree authorization points of machinery, materials and chemicals, resources and environment;There are three full-time master's degree authorization points for machinery, materials and chemical industry, and resources and environment.In the fourth round of national discipline evaluation, the "Mechanical Engineering" of the college was rated as A -, and ranked tenth nationwide.[11]
academic research
Announce
edit
In recent five years, the college has won 21 national, provincial and ministerial scientific research awards (including 3 provincial and ministerial science and technology first prizes, 7 provincial and ministerial science and technology second prizes), and 6 Chinese outstanding patent awards;2193 patents of various kinds were authorized, 5394 index papers were published, and 15 monographs and textbooks were published.[11]
Honors won
Announce
edit
In June 2021, the Committee of the College of Mechanical and Automotive Engineering of South China University of Technology of the Communist Party of China was selected as the target to be commended by the Education Working Committee of the Guangdong Provincial Party Committee and the Education Department of Guangdong Province.[9]
On April 29, 2022, the Youth League Branch of the second class of 2018 vehicle engineering major in the School of Mechanical and Automotive Engineering of South China University of Technology was awarded the "May 4th Red Flag Youth League Branch Pacesetter of Guangdong Province"title.[10]
School of Mechanical and Automotive Engineering, South China University of Technology
College leaders
Announce
edit
post
full name
Division of labor
Secretary of the Party Committee
Lei Yusheng
Preside over the overall work of the College's Party Committee, in charge of the Party building, organization, talent team building, postgraduate ideological and political work, the Teachers' Congress, the Customs Working Committee, trade unions, alumni associations and other work
President, Deputy Secretary of the Party Committee
Li Weihua
Preside over the overall administrative work of the college, in charge of discipline construction and financial work
Deputy Secretary of the Party Committee, Secretary of the Commission for Discipline Inspection
Yang Haosong
In charge of discipline inspection and student ideological and political work
Vice President
Hong Xiaobin
In charge of scientific research and assisting in personnel work
Vice President
Feng Yanhong
In charge of postgraduate enrollment and training
Vice President
Huangyan River
In charge of undergraduate enrollment and cultivation
Vice President
Yang Chao
Responsible for international exchange and cooperation, school enterprise cooperation, training, and assisting in discipline construction
Vice President
Jiang Saihua
In charge of laboratory construction, management and safety[12]
Organization
Announce
edit
School of Mechanical and Automotive Engineering, South China University of Technology
It includes the Department of Mechanical Manufacturing Engineering, the Research Institute of Metal Material Preparation, Forming and Equipment, the Department of Automotive Engineering, the Department of Mechanics, the Department of Mechanical and Electronic Engineering, the Research Institute of Advanced Manufacturing Technology and Equipment for Polymer Materials, the Department of Industrial Equipment and Control Engineering, and the Engineering Training Center.[1]
teaching staff
Announce
edit
The college attaches great importance to the construction of the teaching staff, focusing on optimizing the team structure, improving the overall quality, strengthening the training of young and middle-aged backbone teachers, and introducing high-quality and broad vision top scientific and technological talents.The college has a teaching and scientific research management team with reasonable professional title, age, educational background structure, good quality, unity and cooperation, innovative consciousness and vitality.The college has 352 teaching staff, including 235 full-time teachers, accounting for 66.76% of the total number of teaching staff, 66 professors (50 doctoral supervisors), 83 associate professors, 24 senior engineers, and 138 teachers with doctoral degrees, accounting for 58.72% of full-time teachers.The college has selected more than 30 teachers to study for degrees or go abroad for further study, employed nearly 50 famous scholars at home and abroad as part-time professors or guest professors of the college, and introduced more than 30 senior talents.
More than 10 teachers of the college serve as editorial board members of academic journals, and nearly 40 serve as executive directors (members) of professional associations and teaching guidance committees.Among young and middle-aged academic backbonesNational Science Fund for Distinguished Young ScholarsTwo winners, the Ministry of Education cross the century (new centuryYoung Teacher Award）There are 9 candidates in the excellent talent training plan (2 new candidates in 2006), who enjoy the“Government special allowance”14 people, national level“Ten thousand projects”There are 2 training objects, 11 provincial-level training objects of the "Ten Thousand Ten Projects" in Guangdong Province, and 2 famous teachers in Guangdong's colleges and universities.The staff with graduate education accounted for 84.74% of the total number of full-time teachers.
List of college professors
administrative organ[2]
List of professors
1. Department of Mechanical Manufacturing Engineering
Ye Bangyan, Zeng Zhixin, Tang Yongquan, Yan Mingxia, Qin Xiang, Li Weiguang, Xie Jin, Wang Qinghui, Zhou Hongfu, Liu Wangyu, Zhao Xuezhi
2. Institute of Metal Material Preparation, Forming and Equipment
Li Yuanyuan, Xia Wei, Shao Ming, Ni Donghui, Chen Weiping, Kang Zhixin, Liu Yunzhong, Zhou Zhaoyao, Qu Shengguan, Xiao Zhiyu, Zhang Weiwen, Zhao Haidong, Li Xiaoqiang, Li Liejun
3. Department of Automotive Engineering
Lan Fengchong, Ding Kang, Chen Jiqing, Shangguan, Wen Bin, Zang Mengyan, Li Lifu, Xie Xiaopeng, Du Qungui, Chi Yongbin, Jian Qifei, Luo Yutao, Ding Wensi, Wu Jianghong
4. Department of Mechanics
Huang Ping, Li Lin, Chen YangzhiZhang TieQiu Zhicheng, Liu Xiaokang
5. Department of Mechanical and Electronic Engineering
Zhang Xianmin, Yang Yongqiang, Xue Jiaxiang, Cao Biao, Li Di, Liu Guixiong, Yao Xifan, Zhong Hanru, Hu Guoqing
6 Advanced Manufacturing Technology and Equipment Research Institute of Polymer Materials
Qu Jinping, He Hezhi, Wu Hongwu, Peng Xiangfang, Wen Shengping, Liu Bin, Feng Yanhong
7. Department of Industrial Equipment and Control Engineering
Huang Hanxiong, Chen Kejuan, Chen Guohua, Jiang Nan, Hu Xiaofang, Liang Jizhao, Luo Xiaoping, Huang Si, Jiang Lichun
Department of Mechanical Manufacturing Engineering
The Department of Mechanical Manufacturing Engineering of the School of Mechanical and Automotive Engineering of South China University of Technology, founded in April 2013, is the main undertaking unit of the mechanical manufacturing and automation discipline of our university, and takes the lead in the undergraduate major of mechanical engineering.Our department has a long history. Its subject was founded in the former National Sun Yat sen University in 1934. In 1952, it was adjusted to become the machinery manufacturing major of South China Institute of Technology.As early as the 1960s and 1980s, under the leadership of professors Zhou Zehua and Chen Tongjian, the discipline carried out fruitful research in metal cutting theory, numerical control technology and other research fields.In 1981, it was rated as one of the first national doctoral degree authorization points.In 2003, it was approved as the first level discipline of mechanical engineering and the first level disciplinecenter for post-doctoral studies 。The mechanical manufacturing and automation discipline of South China University of Technology has always been a key discipline in Guangdong Province, and also a key discipline in the "211 Project" and "985 Project" of South China University of Technology.In 2006, the first level discipline of mechanical engineering was rated as the key discipline of Guangdong Province, in 2007, it was listed as the national key discipline cultivation discipline by the Ministry of Education, and in 2012, the first level discipline of mechanical engineering was selected as the key discipline of Panfeng, Guangdong Province.For a long time, the discipline has carried out research work around precision manufacturing equipment, precision and ultra precision machining technology, precision forming and mold technology, equipment oriented control technology, etc., and has cultivated a large number of advanced manufacturing innovation talents for the country.Some disciplines are in an advantageous position in China, and have formed an important influence on the equipment manufacturing industry at home and abroad, especially in South China.
The Department of Mechanical Manufacturing Engineering has 27 full-time teachers and 5 experimental teaching staff.Among them, there are 15 professors (12 doctoral supervisors), 9 associate professors and 1 senior experimenter.Among the teaching staff, there are one national level training object of the "Ten Thousand Ten Projects" in Guangdong Province, two provincial level training objects, one "New Century Excellent Talent" of the Ministry of Education, and two winners of the "Outstanding Youth Fund" of the Natural Science Foundation of Guangdong Province. A high-quality discipline team with basically reasonable professional title structure, academic history structure, and age structure has been formed.At present, the academic research team led by the Department of Mechanical Manufacturing Engineering includes:
1. Advanced manufacturing academic team of surface function structure
2. Functional structure digital design and manufacturing academic team
3. Academic team of plastic forming and mold computer technology
4. Modern machining theory and manufacturing system computer application academic team
5. Mechatronics and modern detection technology academic team[4]
Department of Mechanics
The Department of Mechanics, School of Mechanical and Automotive Engineering, South China University of Technology was established in April 2013.At present, there are 16 full-time teachers and 6 experimental teaching staff.Among them, there are 5 doctoral supervisors, 8 professors (1 second level professor, 1 third level professor, and 6 fourth level professors), 14 master's supervisors, and 9 associate senior titles (including associate professor, associate researcher, senior engineer, and senior experimenter).The current teachers have received dozens of national, provincial and ministerial awards and honorary titles.Among them, there is one "National Famous Teacher of Ten Thousand Talents Plan", one "Winner of Guangdong Outstanding Youth Fund Project", one "Guangdong Famous Teacher of Teaching", and one "Young Teacher Award Winner of Fok Ying Tung Education Foundation of the Ministry of Education".
The teachers of the Department of Mechanics are mainly responsible for the teaching of basic machinery courses and the experimental teaching of basic machinery;Scientific research is mainly responsible for the research work of basic science problems of mechanics. The main research fields and directions are: mechanical tribology and surface technology, mechanical transmission (such as wire gear),mechanical kinetics, vibration, modern design methods,Robotics, interdisciplinary fields of machinery and biology (such as human rehabilitation machinery), etc;At the same time, he is also engaged in the development of electromechanical integration, intelligent robots and special robots.
The Department of Mechanics has one national teaching team and two scientific research teams.
Teachers of the Department of Mechanics have undertaken more than 30 national projects such as the National Natural Science Foundation of China, the National "973" Program, the National 863 Program, and more than 100 provincial and ministerial scientific research and teaching projects.He has won two second prizes for national teaching achievements (presided over), one second prize for national natural science (individual participation) and one third prize for national invention (individual participation), and more than 10 provincial and ministerial awards for scientific research and teaching achievements.The editor in chief has published more than 30 academic monographs and textbooks.PublishedThree major search papersMore than 400, including more than 100 SCI journal papers.More than 160 international and domestic patents have been authorized.
History:
1952 Department of Machinery, South China Institute of Technology, the predecessor of South China University of Technology;
In September 1958, it was divided into the Teaching and Research Section of Mechanical Principles and Mechanical Parts of South China Institute of Technology and the Department of Machinery of South China Institute of Chemical TechnologyChemical machineryDepartment of Light Industry Machinery;
In August 1962, South China Institute of Technology and South China Institute of Chemical Technology were re merged into South China Institute of Technology, the Teaching and Research Section of Mechanical Parts and Principles, Department I of Machinery;
In May 1966, South China Institute of Technology was divided into Guangdong Institute of Technology and Guangdong Institute of Chemical Technology, the Teaching and Research Section of Mechanical Parts and Mechanical Principles of the Department of Machinery;
In February 1978, Guangdong Institute of Technology and Guangdong Institute of Chemical Technology were re merged into South China Institute of Technology, the Teaching and Research Section of Mechanical Parts and Principles of Mechanical Engineering Department;
1981 South China Institute of Technology, Teaching and Research Section of Mechanical Parts and Principles, Department of Machinery I;
In January 1988, the Teaching and Research Section of Mechanical Design and the Teaching and Research Section of Mechanical Principles, Department I of Machinery, South China University of Technology;
In 1995, the Department of Mechanical Engineering and the Department of Mechanical Engineering II of South China University of Technology were merged to establish the Department of Mechanical Engineering, the Teaching and Research Section of Mechanical Design and Principles;
In 2002, the Department of Mechanical and Electrical Engineering, the Teaching and Research Section of Cartography and the Teaching and Research Section of Metalworking were merged to establish the College of Mechanical Engineering, and the Teaching and Research Section of Mechanical Design and Principle and the Teaching and Research Section of Original Tolerance were merged to establish the Institute of Mechanical Design and Theory;
In January 2008, the former College of Mechanical Engineering, the College of Industrial Equipment and Control Engineering and the College of Automotive Engineering merged to form the College of Mechanical and Automotive Engineering;The Institute of Mechanical Design and Theory of the former College of Mechanical Engineering and the Institute of Light Industrial Machinery of the former College of Industrial Equipment and Control Engineering were merged to establish the Institute of Mechanical Design and Equipment;
In January 2013, the College of Mechanical and Automotive Engineering was replaced, and in April, the subordinate secondary units were adjusted to establish the Department of Mechanics.
Scientific research team:
1. Information machinery research team
Scientific research team leader: Professor Chen Yangzhi
Key members of the scientific research team: Professor Li Jingrong, researcher Su Fenghua (first), associate professor Xie Longhan, associate professor Zhao Liangzhi (retired)
Main research directions: intelligent machinery, wire gear, mechanical tribology and advanced surface engineering technology, intelligent CAD and virtual reality technology,New energy machinery, human rehabilitation machinery, MEMS, etc;
2. Robot and automation equipment design and theoretical research team
Scientific research team leader:Zhang Tieprofessor
Key members of scientific research team:Zou YanbiaoAssociate Professor, Pan Minqiang Associate Professor (Department of Mechanism), Zhang Dong Lecturer, Zhang Chunhua Lecturer (Department of Mechanical and Electrical Engineering)
Main research directions: industrial robots, disability robots, modern control, etc.[5]
Department of Mechanical and Electronic Engineering
The Department of Mechanical and Electronic Engineering of the School of Mechanical and Automotive Engineering of South China University of Technology was established in April 2013.There are 32 full-time teachers and 2 experimental teaching staff.Among them, there is one distinguished professor of the National Science Fund for Distinguished Young Scholars and Pearl River Scholar, 10 professors and doctoral supervisors, and 11 associate professors and graduate supervisors.
The Department of Mechanical and Electronic Engineering is responsible forMechanical and Electronic Engineering(The third batch of famous brand majors in Guangdong Province), including theoretical teaching, experimental teaching and scientific research. The main research directions of the Department of Mechanical and Electronic Engineering include precision equipment and modern control technology, additive manufacturing (3D printing), welding technology and equipment, digital control and intelligent manufacturing, roboticsModern detection technology and networked control.
The Department of Mechanical and Electronic Engineering has Guangdong Provincial Key Laboratory of Precision Equipment and Manufacturing Technology, Guangdong Key Laboratory of Precision Manufacturing Technology and Equipment for Ordinary Universities, Guangzhou Engineering Technology Research Center for Intelligent NDT Industry and 6 scientific research teams.
Teachers of the Department of Mechanical and Electronic Engineering have undertaken more than 30 national projects such as the National Science Fund for Distinguished Young Scholars, the National Natural Science Foundation's key and major projects, the National "973" Program, the National 863 Program, and the National Major Instrument Development Project, and more than 100 provincial and ministerial scientific research and teaching projects.He has won two second prizes of national scientific and technological progress (presided over), six first prizes of provincial and ministerial level, and more than 20 other provincial and ministerial level awards.The editor in chief has published more than 40 academic monographs and textbooks, participated in the compilation of 2 national standards and edited 2 local technical standards.In the past five years, more than 500 of the three major search papers have been published, including more than 250 SCI/EI journal papers and more than 300 authorized patents.
History:
In 1995, the Department of Mechanical Engineering I and Department of Mechanical Engineering II of South China University of Technology merged to establish the Department of Mechanical and Electrical Engineering, the Department of Mechanical Electronics and the Department of Welding;
In 2002, the Department of Mechanical and Electrical Engineering, the Teaching and Research Section of Cartography and the Teaching and Research Section of Metalworking were merged to establish the College of Mechanical Engineering, the Teaching and Research Section of Mechanical Electronics and the Teaching and Research Section of Welding;
In January 2008, the former College of Mechanical Engineering, the College of Industrial Equipment and Control Engineering and the College of Automotive Engineering merged to form the College of Mechanical and Automotive Engineering;The Mechatronics Research Institute and the Welding Technology Research Institute of the former Mechanical Engineering College were merged to form a new Mechatronics Engineering Research Institute;
In January 2013, the College of Mechanical and Automotive Engineering was replaced, and in April, the subordinate secondary units were adjusted to establish the Department of Mechanical and Electronic Engineering.[6]
Department of Automotive Engineering
The Department of Automotive Engineering, School of Mechanical and Automotive Engineering, South China University of Technology was established in April 2013, including "vehicle engineering"“Energy and Power Engineering”Two undergraduate majors.There are 45 full-time teachers and 7 experimental teaching staff.Among them, there are 14 doctoral supervisors, 16 professors, 29 graduate supervisors, and 16 associate senior titles (including associate professors, associate researchers, senior engineers, and senior experimenters).
In recent five years, it has undertaken more than 20 national level projects such as the National Natural Science Foundation of China, the National Science and Technology Support Program and the National 863 Program.It has won the second prize of Science and Technology Progress Award of China Automotive Industry, the second prize of Science and Technology Award of Guangdong Province, the second prize of Science and Technology Award of Ningbo City, major scientific and technological achievements of Hubei Province, and the third prize of Science and Technology Progress Award of Dongfeng Motor Corporation.He has published 12 textbooks and monographs, won one second prize of Guangdong Education and Teaching Achievement Award (Higher Education), granted more than 90 patents, and published more than 260 major index papers.On average, it undertakes more than 90 scientific research projects every year, with nearly 10 million yuan of scientific research funds.
History:
1970 - Preparation for the establishment of Department 1 of Machinery (Automobile Teaching and Research Section);In 1972, the first undergraduate majoring in automobile was recruited;
1981 - Department 1 of Mechanical Engineering, former College of Mechanical Engineering;
1996 - Department of Vehicle Engineering, former College of Transportation;
2004 - Department of Vehicle Engineering, the former College of Automotive Engineering (established by the former Department of Vehicle Engineering, Department of Engineering Machinery and Department of Energy and Power Engineering of Jiaotong University)
2008 - Automotive Engineering Research Institute, College of Mechanical and Automotive Engineering (established by the former College of Mechanical Engineering, College of Automotive Engineering, and College of Industrial Equipment and Control Engineering)
2013 - Department of Automotive Engineering, College of Mechanical and Automotive Engineering.[7]
Department of Industrial Equipment and Control Engineering
The Department of Industrial Equipment and Control Engineering (hereinafter referred to as the Department of Industrial Control) of the School of Mechanical and Automotive Engineering of South China University of Technology is the predecessor of the Institute of Light Industrial Equipment and Control Engineering, the Institute of Chemical Machinery, the Institute of Safety Engineering, and the Institute of Corrosion and Protection of the former School of Industrial Equipment and Control Engineering, which is located in Building 29, Wushan Campus, South China University of Technology.The Department of Industrial Control has three undergraduate majors: process equipment and control engineering, process equipment and control engineering (light machine), and safety engineering;There are three doctoral programs in chemical process machinery, mechanical engineering, and material processing engineering, and postdoctoral researchers can be recruited in mechanical engineering, material processing engineering, power engineering, engineering thermophysics and other fields;It has five academic master recruitment majors, namely, chemical process machinery, mechanical engineering, material processing engineering, safety science and engineering, and oil and gas storage and transportation engineering, and can enroll full-time master of engineering in such professional degree fields as mechanical engineering, material processing engineering, and safety engineering.There are 1 provincial and 1 school level graduate joint training base;There is a "China Australia Natural Gas Partnership Fund Training Center" approved by the superior department.
Process equipment and control engineering:It mainly cultivates senior engineering and technical personnel engaged in the research and development, design, installation, operation, control technology and management of process equipment, oil and gas storage and transportation equipment and their control systems. It has many characteristics such as interdisciplinary, broad fields, strong engineering practice ability, and good comprehensive quality of students.This major has a long history, prominent professional characteristics, and a wide field of employment for students, which is welcomed by employers.The employment areas of students are concentrated in Guangzhou, Shenzhen, Zhuhai and other Pearl River Delta regions.
Process equipment and control engineering (light machine):Cultivate light industrial machinery andPlastic moldSenior engineering and technical personnel with basic theories, methods and skills of design, manufacturing, automation and intellectualization.Focus on cultivating students' ability to develop light industrial machinery (such as plastic, rubber, food, paper making, packaging and other equipment) and plastic molds to meet the needs of product production process;To enable students to have comprehensive abilities in basic theory, engineering technology and production management, and to engage in scientific research, technology development and business management in the fields of light industrial machinery and plastic mold design and manufacturing, computer simulation, control and process optimization, new materials and new products development and preparation.Through learning basic theories and professional knowledge, and receiving basic training in modern science and engineering technology, students will have the basic ability to design and develop light industrial machinery, plastic molds, computer control, simulation and related software, as well as the basic ability to make scientific decisions and organize management.This major adapts to the development of national and regional economic construction, has outstanding professional pertinence, and graduates are in short supply.
Safety engineering:The first undergraduate major in safety engineering in South China.Safety engineering is a cross disciplinary discipline with system theory, information theory and cybernetics as the guide, safety science as the foundation, and machinery, chemical engineering, mechanics, management, law, computer and other comprehensive cross disciplines. There is a huge demand for talents.This major cultivates high-quality compound talents in safety technology and management that are urgently needed by government safety production supervision and management departments at all levels and large and medium-sized enterprises.Through participating in extracurricular scientific research practice training plan for undergraduate students, safety production publicity activities carried out by regional safety management departments, enterprise practice and other practical links, we can get in touch with engineering practice, exercise practical ability, cultivate innovation awareness, and have the ability to use the knowledge we have learned to solve practical problems.
The Department of Industrial Control has actively participated in the construction of the national innovation system and built a high-level, interdisciplinary scientific and technological innovation platform. At present, it has participated in the construction of two provincial and ministerial level scientific and technological innovation platforms (equipment manufacturing technology and its informatization scientific and technological innovation platform, public security scientific and technological innovation platform) and one provincial platform. It has 1800 various instruments and equipment, with a total asset value of nearly 40 million yuan,Among them, there are 20 sets of large-scale precision instruments of more than 100000 yuan, with advanced equipment and strong experimental technical force, providing good conditions for teaching and scientific research.
History:
The Department of Industrial Control, formerly known as the Department of Chemical Machinery, was founded in 1958 and includes four majors: chemical machinery, plastic machinery, rubber machinery and paper machinery.
In the 1960s, chemical instrument and automation specialty was added according to the demand of national technological development.
In 1972, the discipline of equipment corrosion and protection was established.
In 1996, on the basis of extensive research, we learned that the society is in urgent need of equipment talents with high comprehensive quality. We took the lead in integrating the original several majors into computer control technology and adjusting them into a comprehensive specialty - industrial equipment and control engineering, which broadened the professional caliber.
Since 1999, it has been renamed as Process Equipment and Control Engineering according to the national unified professional directory.
In 2000, he foundedSafety EngineeringIt is the first university in South China to set up undergraduate major in safety engineering.
In 2002, the Institute of Industrial Equipment and Control Engineering was established.
In January 2008, the former College of Mechanical Engineering, the College of Industrial Equipment and Control Engineering and the College of Automotive Engineering merged to form the College of Mechanical and Automotive Engineering;The Institute of Mechanical Design and Theory of the former College of Mechanical Engineering and the Institute of Light Industrial Machinery of the former College of Industrial Equipment and Control Engineering were merged to establish the Institute of Mechanical Design and Equipment;The Institute of Chemical Process Machinery and Safety Engineering of the former College of Industrial Equipment and Control Engineering was merged to establish the Institute of Chemical Machinery and Safety Engineering.
In January 2013, the College of Mechanical and Automotive Engineering was replaced. In April, the subordinate secondary units were adjusted. The Institute of Light Industrial Machinery and the Institute of Chemical Machinery and Safety Engineering of the former College of Industrial Equipment and Control Engineering were merged to form the Department of Industrial Control.[8]
Institute of Advanced Manufacturing Technology and Equipment for Polymer Materials
The Institute of Advanced Manufacturing Technology and Equipment for Polymer Materials, School of Mechanical and Automotive Engineering, South China University of Technology was established in January 2008.There are 19 full-time teachers and 5 experimental teaching staff.Among them, there are 1 academician of the Chinese Academy of Engineering, 4 doctoral supervisors, 8 professors, 15 master's supervisors, and 8 deputy senior titles (including associate professors, associate researchers, senior engineers, and senior experimenters).
The Institute of Polymers undertakes the scientific research on the preparation and processing of multiphase multi-component composites, precision processing and molding of polymers, and the preparation and molding of porous functional materials.There are 4 scientific research platforms under the Institute of Polymer: National Engineering Research Center for New Polymer Forming Equipment, Key Laboratory of Polymer Forming and Processing Engineering of the Ministry of Education,Guangdong High end Manufacturing Equipment Collaborative Innovation Center，National Engineering Laboratory of Plastics Modification and Processing。
The National Engineering Research Center for New Polymer Forming Equipment grasped the development trend of national industrial energy conservation and consumption reduction, aimed at solving common technical problems urgently needed for the sustainable development of China's polymer processing industry, focused on the research of polymer efficient and energy-saving forming processing technology and equipment, and successfully developed a series of polymer efficient and energy-saving processing equipment and realized industrialization,These include: plastic dynamic plasticizing extruder, three screw dynamic mixing extruder for polymer and its composites, plastic pulsating pressure induced injection molding machine, physical field enhanced online mixing injection molding equipment, polymer dynamic rheological workstation, vane plastic plasticizing extruder, vane pre plastic plastic injection molding machine, etc.The new technology products are produced and sold by many plastic machinery manufacturing enterprises, and have been popularized and applied in nearly 30 provinces, cities and autonomous regions in China, with remarkable social and economic benefits.
The basic task of the Key Laboratory of Polymer Forming and Processing Engineering of the Ministry of Education is to create good scientific research conditions and academic environment, attract and gather outstanding scholars at home and abroad, carry out high-level applied basic research in the forefront of polymer material forming and processing engineering, and provide theory and technical equipment for polymer forming and processing technology progress and high-tech development.Strive to build the laboratory into a scientific research base and talent training base open to the world and representing the advanced level of polymer molding and processing research in China, and make due contributions to China's polymer industry.
Guangdong High end Manufacturing Equipment Collaborative Innovation Center, led by South China University of Technology and integrating domestic competitive innovation forces, is the first regional collaborative innovation center oriented to the development of Guangdong's regional pillar industries, which was recognized as one of the first provincial collaborative innovation centers in Guangdong Province in April 2014.The center is driven by the demand of Guangdong manufacturing industry for high-end manufacturing equipment and centered on mechanical engineering disciplineControl Science and Engineering、Computer Science and Technology, material science and engineeringInstrument Science and TechnologyAnd other related disciplines, highlight the research and development advantages of the Center in three high-end equipment, namely polymer product manufacturing equipment, electronic information product manufacturing equipment, and professional robots, carry out collaborative innovation research on common key technologies, develop typical high-end manufacturing equipment products urgently needed by the industry, and create services for the sustainable development of Guangdong's manufacturing industryThe domestic first-class high-end manufacturing equipment innovation research and development and talent training highland will accelerate the transformation and upgrading of Guangdong's manufacturing industry, reverse the "big but not strong" appearance of Guangdong's manufacturing industry, and realize the leap forward development of Guangdong from "big manufacturing province" to "strong manufacturing province".
The National Engineering Laboratory for Plastics Modification and Processing was approved by the National Development and Reform CommissionKingfa Technology Co., LtdThe research and development entity jointly established by South China University of Technology and other famous universities and research institutions in China is an important part of the national scientific and technological innovation system.The National Engineering Laboratory for Plastics Modification and Processing has built research and test facilities for high-efficient polymer blending modification, chemical modification, processing technology research, processing equipment, testing, evaluation and analysis around the needs of China's key industries and emerging industries such as electronics, transportation, aerospace, energy conservation and environmental protection, new energy, high-end equipment manufacturing, etc,Build an advanced research and public service platform for plastic modification and processing, establish a first-class scientific research and development team in the industry, break through a number of key common technologies in the industry, and improve China's plastic modification and processing technology level and international competitiveness.At the same time, based on the mechanism of "protecting key technologies and sharing common technologies", promote the radiation of laboratory research and development achievements to the industry, and promotePlastic modificationAnd the transformation, upgrading and rapid development of the processing industry.
History:
1958-1994, Department of Chemical Machinery, South China Institute of Technology, Plastic Machinery Teaching and Research Section
In 1994, the Institute of Mechanical and Electromagnetic Integration was set up from the Plastic Machinery Teaching and Research Office
In 1995, the polymer molding equipment engineering research center was established
In 1998, the National Planning Commission approved the establishment of the National Engineering Research Center for New Polymer Forming Equipment
In 2000, the Key Laboratory of Polymer Forming and Processing Engineering of the Ministry of Education was formally established after the evaluation and acceptance of the Ministry of Education
In 2008, it became the Research Institute of Advanced Manufacturing Technology and Equipment for Polymer Materials, School of Mechanical and Automotive Engineering, South China University of Technology
In 2008, the National Development and Reform Commission approved the establishment of a national engineering laboratory for plastic modification and processing with Kingfa Technology Co., Ltd
In 2014, it was identified as Guangdong High end Manufacturing Equipment Collaborative Innovation Center by the first batch of provincial collaborative innovation centers in Guangdong Province.[8]
Institute of Metal Material Preparation, Forming and Equipment
The Institute of Metal Material Preparation, Forming and Equipment, School of Mechanical and Automotive Engineering, South China University of Technology was established in January 2008.There are 27 full-time teachers and 5 experimental teaching staff.Among them, there is one academician of the Chinese Academy of Engineering and one winner of the National Science Fund for Distinguished Young Scholars,Young and middle-aged experts with outstanding national contributions1 person, 6 new century outstanding talents of the Ministry of Education, 1 distinguished professor of Pearl River Scholar in Guangdong Province, 1 national target of "One Hundred and Ten" in Guangdong Province, and 6 provincial target of "One Hundred and Ten" in Guangdong Province.There are 16 doctoral supervisors, 17 professors, 20 master's supervisors, and 9 associate senior titles (including associate professors, associate researchers, senior engineers, and senior experimenters).The Institute of Metal Material Preparation, Forming and Equipment is responsible for the teaching of material forming and control engineering (metal direction), scientific research on metal material preparation and forming, and equipment research and development related to metal material preparation and forming.There are 4 scientific research platforms:National Engineering Technology Research Center for Near net Forming of Metal MaterialsKey Laboratory of Efficient Near net Forming Technology and Equipment for Metal Materials of the Ministry of Education (Class B)Guangdong Key Laboratory of New Metal Materials Preparation and FormingGuangzhou Nonferrous Metal Casting Industry Engineering Technology Research Center.
The National Engineering Technology Research Center for Near net Forming of Metal Materials, with the Institute of Metal Materials Preparation, Forming and Equipment as the main body, is a public welfare project approved by the Ministry of Science and Technology in February 2009, relying on South China University of TechnologyNational Engineering Technology Research Center。Professor Li Yuanyuan is the director of the Center, and Academician Huang Boyun is the director of the Technical Committee.The center now has 42 members, and more than 90% of the members have doctoral degrees.In addition, there are more than 200 doctoral, master's and postdoctoral students.The center has two first level national key disciplines, namely "material science and engineering" and "mechanical engineering", two first level doctoral authorization points in "material science and engineering" and "mechanical engineering", and two post doctoral mobile stations in "material science and engineering" and "mechanical engineering".
The overall goal and orientation of the center is to meet the major national needs and the urgent needs of industry developmentNear net shape technologyFocusing on efficient utilization of metal materials and short partsProcess manufacturingIn order to solve the bottleneck problem in the national economy and national defense construction, we will continue to introduce new near net forming materials, new processes and new equipment with independent intellectual property rights, promote the engineering and industrialization of scientific and technological achievements, provide strong technical support for the national economy and national defense construction, and strive to build the center into a technological innovation base with international advanced level.
The main research directions of the center are: (1) casting near net shape technology;(2) Powder metallurgy near net shape technology;(3) Efficient precision plastic forming technology.The center adheres to the research characteristics of "integration of materials, technology, equipment and parts", and pays attention to the combination of "basic research, pilot test and industrialization".It has won 10 ministerial and provincial awards, including 2 second prizes of the National Science and Technology Progress Award.
The center has built a basic research base (3000 m2), a pilot development base (2000 m) and an industrialization base (30000 m), creating good conditions for promoting the rapid transformation of research achievements.The fixed assets of the basic research base and pilot scale test base exceeded 60 million yuan, and the casting and formingPowder metallurgy formingAnd the preparation and forming platform of efficient precision plastic forming;Detection platform for composition, structure and performance analysis;Computer simulation platform for casting forming, powder metallurgy forming and plastic forming.
The Center attaches great importance to academic exchanges and cooperation at home and abroad.Around the main research fields, andohio state university , Tohoku University and Iwate University of Japan, Finland National Technology Research CenterTechnical University Berlin, GermanyMany universities and research institutes have established the relationship of academic cooperation and talent exchange.In addition, it also participated in the establishment of the "Strategic Alliance for Technological Innovation of Non ferrous Heavy Metal Short Process Energy Saving Metallurgy Industry", "Guangdong Provincial Industry University Research Strategic Alliance for Comprehensive Utilization of Renewable Metal Resources", and actively promoted the industrial upgrading and optimization of the metal processing industry.[8]
Experimental Center
The laboratory of the College of Mechanical and Automotive Engineering was established by the formerCollege of Mechanical Engineering, Automotive Engineering College and Industrial Equipment and Control Engineering College were merged and established in February 2008. Based on the principle of centering on teaching experiments and focusing on scientific research experiments, and according to the characteristics and development trend of the discipline, the laboratory of the new college is now divided into two major parts: the college experiment center and the scientific research experiment base.Currently, Vice President of the CollegePeng XiangfangThe professor serves as the director of the laboratory center of the college and presides over the work of the college laboratory.The college has aNational Engineering Research Center“National Engineering Research Center for New Polymer Forming Equipment”, oneEngineering Research Center of the Ministry of Education"Engineering Research Center for Metal New Material Forming and Equipment of the Ministry of Education", aKey Laboratory of the Ministry of Education“Key Laboratory of Polymer Forming and Processing Engineering, Ministry of Education”It has the only key laboratory of automobile engineering in Guangdong Province, the world-class BMW technical training center and UGS carsVirtual technologyExperimental innovation platform for college students.It has a national experimental teaching demonstration center for basic machinery teaching and a Guangdong experimental teaching demonstration center for basic machinery experimental teaching and industrial training;Equipment manufacturing technology and its informatization, public safety, and automobile technology are three innovative science and technology platforms in Guangdong Province.The college also has the onlyCombination of production, teaching and researchGuangzhou Automotive Technology Center.Mechanical engineering discipline has become an important talent training base and scientific research base in manufacturing, machinery, material processing and other fields in South China, playing a very important role in talent training, scientific and technological innovation and promoting local economic construction.
Industrial Training Center
Large transmission system of Mercedes BenzTeaching model
The laboratory of the college covers an area of about 20000 square meters. It has a group of 77 full-time experimental technicians with rich experience who have been engaged in experimental teaching and guidance for a long time. Among them, 4 are employed for the second and third level posts of the "Xinghua Talent Project" experimental series, 5 are employed for the fourth level posts, and a total of 7 are with deputy senior titles or above, forming a team with high academic level and strong practical ability,Reasonable laboratory personnel and technical team.There are more than 9000 sets of instruments and equipment in the laboratory, with a total value of more than 100 million yuan, including more than 140 sets of large-scale instruments and equipment worth more than 100000 yuan, and 80 sets of valuable instruments worth more than 200000 yuan, equipped with "single acting copper extrusion hydraulic press"“Vertical machining center”"Three coordinate measuring instrument"“X-ray diffractometer”"Chassis Dynamometer System of German AVL-Z Ö LLMER Company", "Vehicle Data Acquisition System"“Automotive transmission systemTest bed, enginefault diagnosisExperimental bench "," ABS test bench "," High temperature gel permeation chromatograph "“Infrared spectrometer”、“Electronic universal material testing machine”, "multi screw reactive extruder" and a large number of other experimental instruments.
The laboratory of the college has strong scientific research experiment ability and scientific and technological innovation ability. In addition to offering professional, comprehensive, designed and innovative experimental courses for students, it also undertakes the national "973", "863"National Natural Science Foundation of ChinaInnovation team and major and key projects of the Ministry of Education, major defense and military projectsNatural Science Foundation of Guangdong ProvinceKey breakthrough projects in key fields in Guangdong and Hong Kong, key scientific and technological projects in Guangdong Province, key scientific and technological projects in Guangzhou City and a large number of projects entrusted by enterprises.It is the main base for experimental teaching, scientific research, talent training and technical services of our college, and also an essential base for discipline development.
