Epoxy resin adhesive The Conduit Wear resistant ceramics Glue Ceramic Glue
The wear-resistant ceramic adhesive has high bonding strength - no vertical flow, and is suitable for various metals, ceramics cement 、 Glass Sealing and repair of material surface, vertical surface, convex or concave surface. Strong resistance to medium - It has the advantages of medium resistance, high bonding strength, electrical insulation, chemical corrosion resistance, wear resistance, aging resistance, heat resistance, oil resistance, water resistance and resistance to a variety of chemicals, and low shrinkage and water absorption.
Application field of wear-resistant ceramic adhesive: 1. Bonding, such as bonding between graphite, ceramics, quartz and metal bodies or between each other, to provide flame retardant and coating protection. 2. Ceramic adhesives are suitable for bonding ceramic liners, alumina, temperature sensors, instruments, anti cushion elements, resistors, gas igniters, mixers and degassers in molten metal furnaces; Thermal insulation board in resistance furnace, sealing casting equipment to prevent molten metal leakage, sealing funnel nozzle, surface coating for molten aluminum contact application, and ceramic coating for automobile engine spark plug to prevent carbon deposition. 3. It is used as an impact resistant and wear-resistant coating for the pulverizing system of coal fired power plants, as well as for repairing and filling cracks in boiler pipes and chimneys. 4. It is used as refractory material for bonding, repairing and caulking in furnaces and furnaces, as well as flame resistant and heat radiation relieving coating for various base layers.
Desulfurization of power plant is recognized as an important standard, and the application of good desulfurization equipment can not only provide better equipment for the power plant, but also make a good contribution to the environmental protection of the place where the power plant is located.
In order to improve the wear resistance of steel materials used in the desulfurization system of power plants, aluminum oxide ceramic chips, also known as wear-resistant ceramic chips, are usually pasted to solve such problems. However, due to the high temperature resistance, ordinary epoxy products used at room temperature are not suitable for use in an environment above 150 degrees, which will accelerate the aging and decomposition of materials and reduce the bonding performance.
For those with temperature resistance of 200 ℃, 181 glue is used to bond the ceramics, and the service life of furnace body and flue. If the temperature resistance is 150 ℃, 121 strength strong epoxy adhesive is used to bond alumina ceramics. Cost savings. In response to the call for energy conservation and emission reduction, our factory will continue to use technology to save labor and material costs for enterprises.