one code: a、 Press# key Then, input the existing password, press # key to confirm, and the display screen displays "OPEN" door 。 When "OPEN" is displayed, press the * key, the display screen displays "---------", enter 4-8 digit password, press # to confirm, and INTO is displayed.
b. When the door is opened, press the red button, and the display screen displays “--------” , Input 4 -8 Bit password, press # Confirm, display INTO 。
two . Door opening: Press the # key, enter the password, and press # to confirm; When the password is correct, OPEN is displayed, otherwise ERROR is displayed, please re-enter.
three Start emergency signal: press “ *999”# key , display "BELL ON", enter the alert, once shaking, start the emergency signal for 30 seconds, then continue to be in the alert state, input the correct password, Start emergency signal stop it 。 If the code is wrong three times in a row, start the emergency signal for 1 minute and input the correct password, Start emergency signal stop it 。 each After inputting correct password once, delay five Minutes to enter the alert state.
four 、 To disarm: press # Enter the password after the key, and display “OPEN” When, press *111# Shake to start the emergency signal warning;
five Under voltage indication: When Battery When the voltage is insufficient, the battery symbol on the lower right foot of the display screen shows the symbol that the battery voltage is insufficient. Please replace the battery as soon as possible.
six Clock setting : In static state, press the "*" key, and the front position of the display screen "--------" flashes. At this time, press 0 or 8 to set, press # key to move the flashing position, and press # key to confirm after setting.
seven , Display Hidden : Before entering the password, press #, then *, and then enter the password. The password will be displayed as "mouth".
eight 、 Error code deletion: In the process of entering the password, press the "*" key to delete characters.
9. Silent sound off: In static state, press *633 , when pressing the keyboard, the buzzer will turn off. At this time, the buzzer will not sound when pressing the key: In static state, press *66 , the buzzer prompt tone is turned on.
10. Query: By # Enter the password after the key, and display “OPEN” After finishing, press the 0 or 8 key,