The progress of society has changed our life, and most people have begun to pursue a more comfortable and warm life. With the advent of floor heating, users prefer this heating equipment. today, Huairou The floor heating factory will share relevant knowledge about floor heating installation. Users who have not installed floor heating at home should pay attention to the following contents.
1、 Design installation scheme.
Before installation, we should design the heating scheme according to the characteristics of the house type, heating demand and other factors, and plan the preliminary technical disclosure work The Conduit Wiring layout Water separator Installation position, etc. Professional HVAC personnel are requested to make technical disclosure with the decoration company before the water and electricity improvement, and inform Party A of the detailed preparation before entering the site for construction. If the water and electricity pipes need to be moved away, the temperature controller power cord The waterproof and closed water test shall be carried out first. These details can not only save the decoration period, not affect the home layout, but also achieve good heating effect.
II Shop floor heating.
Considering that various brands and products in the market are mixed, the quality of floor heating is difficult to guarantee, and some manufacturers can not even provide after-sales service, we recommend consumers to choose carefully, and try to find professional floor heating companies or brand stores to choose those * * * products. After all, for long-term survival, these brands will enhance brand competitiveness in many ways, improve product quality, improve service system, and better meet consumer needs.
III Floor heating installation 。
The floor heating construction process is professional and meticulous. Only the construction personnel with rich installation experience can grasp the overall situation when installing the floor heating. In the process of floor heating construction, the following details are often worth noting:
1. The construction personnel need to design and plan according to the layout of the room, and ensure that the ground is clean after entering the construction site. Next, the construction personnel should determine the installation position of the wall mounted boiler and the water separator, and the water separator should be positioned according to the pre marked position wall The installation shall be straight and firm.
2. When installing the main pipe, the construction personnel shall keep the main pipe at a certain slope and install and fix it at intervals Bracket And then press for acceptance and insulation. In addition, the temperature control line is buried in the place where the water collector is installed for connection.
3. Before laying the insulation board, it is necessary to accurately cut the insulation board; When laying, the pipeline shall flow out of the gap; At the same time, the reflective film should also be closely attached to the insulation board, and the edge of the reflective film should be glued with adhesive tape and paved with steel wire mesh.
4. The floor heating coil shall be installed in strict accordance with the design and construction drawings. After laying, it shall be filled with cold water. Then, it shall be sealed for one day with a special press of 10Kg.
IV Pressure test after completion.
After the installation of floor heating, the system shall be pressure tested, which is an important step in the installation project and cannot be omitted or ignored. The specific operation method is to first close the main pipe valve and open the water inlet valve of the floor heating system to test with pressure testing equipment. The test pressure is the normal working pressure 1.5 times, it is qualified if there is no running, emitting, dripping and leaking.
The above describes the installation steps of floor heating and some precautions during installation. I believe it will be helpful to the majority of heating users.
