Electric hoist of Wuhu Factory door Product application:
Ideal for all kinds of commercial and production doors
Wuhu Factory Electric Liftgate Product Introduction:
The industrial sliding door has strong wear resistance and can adapt to buildings of any structure. In order to ensure that the product is trouble free and has a long service life, we have integrated modern scientific and technological factors into the high degree materials. Special components are preset in the door and guide rail system, which greatly improves the reliability and wear resistance of the door. All fast rising products are high-tech products with extraordinary performance. Quick lift liftgate door plank It has the characteristics of energy saving and heat preservation, and the perfect sealing system can greatly improve its heat insulation effect.
Detailed configuration of electric liftgate in Wuhu Plant
Wuhu factory electric lift door panel
40mm thick and 500mm high, with 0.5mm thick horizontal concave convex stripes on the inner and outer surfaces respectively steel plate 。 Interior filling of door panel polyurethane Foam (CFC free) can be used for thermal insulation. Xilang door panel has no thermal bridge, and its insulation performance is particularly good. Sealing rubber is installed at the connection of each door panel to cut off the cold and heat transfer and reduce the heat loss.
Torsion spring balance system of electric liftgate in Wuhu Factory
From inlet height Spring The system ensures the balance. The computer designed torsion spring balance system. The less service life of Xilang Door Industry spring is 30000 cycles. All spring surfaces are electroplated for better corrosion resistance.
Sealing of electric lift gate of Wuhu Factory
It is equipped with top and? Type bottom seals. In addition, rubber seals are provided between all tracks and the door panels of Xilang Door Industry to provide good tightness between the door body and the track.
Wuhu Factory Electric Liftgate Hardware
Hinge, pulley seat, torsion spring bracket and track bracket are stamped with galvanized steel plate, and the thickness of Xilang Door is 2mm. The pulley bracket is an arc bracket, which is easy to be continuously adjusted. All hardware shall comply with European quality standards.
Wuhu Factory Electric Liftgate Track
The wall thickness is 2mm galvanized steel plate, which is composed of wheel rail and auxiliary rail. The galvanizing parameter of Xilang Door Industry is 280um.
Wuhu Factory Electric Liftgate Door Plate Edge Sealing Profile
1mm thick galvanized steel plate, and the surface of the edge sealing profile of the door panel has been sprayed
Wuhu Factory Electric Liftgate Balance Shaft
Pressed galvanized steel pipe
Wuhu Factory Electric Liftgate Bearing Plate
4mm thick high degree galvanized steel plate with stiffening rib design, including a bearing.
Cable reel with sliding cable (a pair)
Made of aluminum, the cable reel is directly fixed on the balance shaft.
Wuhu Spring breaking protection device for soft cloth fast rolling door
The protective device used to prevent the door from falling freely due to the breakage of the torsion spring; In case of any spring breaking, the door will stop within 20 cm.
Wuhu Soft cloth fast rolling door Cable break protection device
A protective device used to prevent the door from falling freely due to the breakage of the sliding cable. Comply with CE safety standards.
Wuhu Soft cloth fast rolling door Bottom safety protection device
It is installed in the sealing strip at the bottom of the door body. When the door bottom touches an obstacle, the pneumatic and infrared devices will stop the door and move it backward to the fully open position.
Wuhu Soft cloth fast rolling door window : Rectangle
Wuhu Soft cloth fast rolling door Material Science : Double acrylic glass for agricultural production system
Wuhu Soft cloth fast rolling door Standard size ：663mmW*343mmH
Wuhu Soft cloth fast rolling door
Motor and control device
Select the corresponding motor type according to the weight and opening frequency of the door. The panel of the control box is equipped with buttons to realize the ON/OFF function. The standard is to open it with three buttons. Other commonly used control functions are optional. The driving power supply of the electric door is 380V/three-phase, 50Hz. The door opening speed is 0.25 m/s.
