Model: HILTI-RE500
Specification: 500ml
Always stay ahead of Hilti RE-500 without fear of harsh environment an adhesive It is a better choice for structure planting reinforcement and heavy load fastening application. A large number of test reports and certifications at home and abroad, combined with a wealth of key engineering application cases, have proved that the installation of RE-500 is not affected by harsh environments, and the anchoring effect is as safe and reliable as the embedded structure, which can be called a higher state of the art of post anchoring technology at present
Base material concrete, natural hard Stone Structural planting reinforcement
Self created soft foil packaging+ergonomic injection system
texture of material Bisphenol A Modified resin (BisphenolAEpoxyResin)
Curing temperature - 5-40 (℃)
Shear strength 7.9KN - 77.8KN (MPa)
Package specification 500ml, 1400ml
Use: concrete structure planting reinforcement, especially important cantilever components, structures and components bearing dynamic action; Fixation of heavy loads, such as beams, columns, machinery, equipment, etc; Chemical post anchoring applications in harsh environments, such as installation in wet, open water, high and low temperature environments and smooth holes; It is especially used for planting reinforcement and fastening of large diameter and buried depth (such as overlapping); Any heavy load application requiring extensive test reports
Characteristics: The strong and stable bond force is evenly distributed along the anchorage height, and the anchorage effect is like the embedded structure; The installation is not affected by harsh environment, and the design force value can be fully used in wet holes and smooth holes drill hole It does not need chiseling treatment and can be installed in open water environment; Wide temperature range, it can bear the ambient temperature of - 50 ℃ to+80 ℃ after installation; No expansion stress anchoring, suitable for small margin and small spacing installation; Excluding benzene Ethylene and ethylene diamine, no odor, meet the requirements of harmless environmental protection, and can be used for installation of equipment in contact with drinking water after solidification; Self created soft foil packaging with less material loss; The double screw mixing nozzle is specially used to ensure accurate mixing ratio, and professional construction tools are provided to ensure standardized construction; National Standard Code for Design of Concrete Structure Reinforcement (GB50367-2006) and the participating units of the code; Long term performance has been certified by China, Switzerland, Japan, the United States, France and other countries; Fire resistance design data is complete (according to ISO834, to F240, 4 hours); The root and double side welding tests are qualified; Advanced rebar planting and anchor bolt design software (EXBAR, PROFIS) and most national engineering technical services
The use and storage environment require that the adhesive itself should not be lower than 5 ℃, and the adhesive after opening must be used up within 4 weeks; The temperature of transportation and storage must be between 5 ℃ and 25 ℃, and the product should be stored in a dry and dark environment; The construction shall be carried out in strict accordance with the construction steps specified by Hilti
Curing schedule
Base material temperature Initial setting time Curing time
-5 (℃) 4 hours 72 hours
0 (℃) 3 hours 50 hours
5 (℃) 2 hours 24 hours
20 (℃) 30 minutes and 12 hours
30 (℃) 20 minutes and 8 hours
40 (℃) 12 minutes and 4 hours
Construction steps
1) Drilling with Hilti TE-76 electric drill system
2) Use a brush and air blower to clean the hole at least three times
3) The first three guns of glue must be discarded when filling glue with the special injection glue gun of Hilti MD2500
4) Inject glue from the bottom of the hole to about 2, 3 of the hole depth
