Consumable spare parts need not be replaced within 100000 pages!The powder box is simple in structure, and the general powder box is easy to add powder!
Most dissatisfied
The mouth of the original cartridge is sealed, and the chip is more expensive!
summary
Comprehensive cost-effective black and white laser printer!As long as the chip is reduced to less than 10 yuan, the universal cartridge with chip is reduced to less than 50 yuan, and the machine price is reduced to less than 900 yuan, this machine will be worth more.
The use cost is low, and the service life of vulnerable parts is 100000 (the machine for fixing film is 30000 pages or 50000 pages, and always needs to be replaced). Previously, only a powder box (or powder filling) was needed!
Most dissatisfied
The developing room is on the machine. If compatible toner is used, it is better to use the same manufacturer and the same batch. Otherwise, there is a risk of problems if the developing room is not cleaned by changing toner.
summary
If the chip is not replaced for powder filling, just press and hold the machine panel and two keys for a few seconds.When using this machine to add compatible toner, pay attention to that the toner flow must be good, and do not fill too full, otherwise it is easy to damage the drive gear of the development bin.
Compatible cartridges are cheap and easy to find, with good durability and long maintenance cycle.
Most dissatisfied
Personally, the paper feeding ability is slightly weaker than that of HP.
summary
Very good printer!Fusing components have a long life, thicker workmanship than similar products of Fuji Xerox. Single component has no carrier, and the image effect is slightly poor, but the maintainability is stronger than that of dual components.
The printing of the newly bought product is very clear, but the printing speed is slow. My printing was stuck in the power failure program once, and the cancellation didn't reflect that it could not be completed. I just unloaded the driver and reinstalled it
Compatible cartridges are abundant, the price is not high, and the service life of developing and fixing components is long.
Most dissatisfied
If different brands of compatible cartridges are used, compatibility is not guaranteed.
summary
This is an excellent product. It is more durable than Fuji Xerox P158b, and the compatible cartridges are not expensive (more expensive than Fuji Xerox P105b cartridges). You can buy compatible cartridges directly for use without adding powder.
The manual paper inlet and outlet of Kyocera 1040 laser printer are at the top of the machine body, and the maximum stack size is 250 pages. The curved surface design is very convenient for paper picking.The printing speed of Kyocera 1040 is 20ppm, which supports A4 paper printing at most, and the black and white homepage output is 8.5 seconds.
summary
Kyocera 1040 is an entry-level laser printer. It has a traditional shape design, adopts black and white colors, and is very convenient to take paper with curved surface design. The warm-up time of the machine is 14 seconds, the first page printing time is 8.5 seconds, the highest resolution is 600 dpi, and the monthly printing volume is 10000 pages, which is very suitable for small and medium-sized enterprises.
Appearance: appearance can Product packaging: very good Printing effect: very good, mainly because the drum has been used for a long time. I have done Kyocera after-sales service before
The delivery is fast, the printer is easy to install, the driver is also simple, the printing effect is OK, but the price of the printer has been rising
The goods are very poor. They find various excuses not to return them. They are not worth buying. The quality of service is extremely poor. * * The seller
The printer has been received, which can meet our needs for large printing volume. It is easy to operate and it is also very convenient to change cartridges. We will visit again next time
Product packaging: environmentally friendly packaging, simplified packaging Appearance: satisfactory, small footprint Printing speed: fast printing speed Printing effect: clear printing effect Easy to operate: easy to install and operate the drive Other features: toner cartridge replaces traditional toner cartridge, and the cost of consumables is greatly reduced
The quality of 1020 Kyocera printer is really good, the printing and copying are clear, especially the after-sales patient explanation, which is trustworthy!
The package is very thick. There are bags everywhere to wrap the machine well. The printing speed is moderate and the copy quality is good.It is said that a box of toner can print 1200 pages.When installing drivers, a Trojan virus warning is always reported. I hope it can be improved in the future.
The effect of printing documents and photocopying certificates is very good. I have used the second one for more than six years. If I bought this machine to print books for children after the teacher took pictures of them and then printed them in the group, I suggest not to buy it. If the photo effect is super clear, it can be printed, but blurry points are not good