1. The appearance of the chassis is pretty good.But it's not pure white, it's off white.2. It is easy to disassemble, the wiring inside is quite reasonable, and the fan supplied by the machine is good.3. The front panel is complete and easy to use.
Most dissatisfied
The board is very thin, it doesn't feel so strong
summary
The chassis is good, very beautiful, giving a simple and generous feeling
The Patriot YOGO M2 chassis uses a split hardware structure. It can support MATX and ITX motherboards, 350mm long graphics cards at most, and 160mm long CPU heat sinks. For most mainstream heat sinks and graphics cards, it can be easily installed.The M2 toughened glass side panel is a magnetic open close design. This design can directly open the side panel of the chassis, which is as simple and convenient as opening the window. It is very interesting.At the edge of the side panel, there is a small handle design for pulling the side panel, which is very close.The bottom of the core box is equipped with a pull-out dust-proof net.It supports overhead 12cm * 2, front 12 * 2 and rear 12 * 1 cooling fans.
Patriot YOGO M2 has two color styles: white and titanium gray. The white has a high color value, but titanium gray is more resistant to dirt, so it directly chooses titanium gray.The side tempered glass adopts magnetic suction design. It seems that the current mainstream side transparencies have been changed to this design. There have been many kinds of magnetic suction covers before. It is really easier to open or close the magnetic suction cover than the screws.From the aspect of appearance design, the highlight should be the magnetic side penetration design, which makes it easier to open or close the side cover.However, there is no dust screen on the top of the chassis, and the air duct in the front of the chassis has been changed to the side of the chassis, which is not enough for users with strong demand for heat dissipation performance.The workmanship and details of the chassis are very good.
It's very cool, and then it looks very good. The key point is to touch it in the hand, and the feel is also very good. In addition, three fans were given away. It's really a very satisfactory purchase process, very satisfied, and well received
Most dissatisfied
Rgb is very cool, but it can't be turned off when it is in standby!The back line has only one slot, and the back plate is attached. Pay attention when routing
summary
If you give full marks, you can give 8-9 points for a product. It's not bad!awesome!
Generally speaking, the reason for this installation is that the opening process of YOGO M2 case was specially recorded in the previous article because of the popularity of small cases.After reviewing the overall unpacking process, I found that the value makers still quite agree with me, and the overall view is similar to what I thought. This time, I will complete the overall installation, because the accessories are mainstream entry-level accessories (entry-level accessories are relatively speaking, so I won't give too much description, just as a preview. Chassis: Patriot Game Pill YOGO M2 The hinge type side transparent glass design has a small handle when opened and a small magnet when closed. I will not elaborate on the overall installation process of the chassis to support the M-ATX type small chassis. You can first see the effect of heat dissipation and motherboard installation. The overall installation effect looks very simple, and the internal space is relatively spacious (the black and white configuration is beautiful The back line management effect may more or less sacrifice some spare line space for a small chassis, but it can be seen from the actual line management effect that the spare line space of YOGO M2 is very abundant
Most dissatisfied
Because the small box still has requirements for the motherboard and graphics card
summary
The installation process of Patriot Game Pill YOGO M2 is easy and pleasant. The internal installation space is very abundant for a small case, and the mainstream configuration can undoubtedly carry it.Long term video cards such as Raptor are compatible. Of course, if it is PGF, you may have to consider sacrificing the front panel fan.Needless to say about the appearance, the overall black and white color matching together with the internal RGB light effect is very eye-catching, which is very suitable for the 24K titanium alloy X-ray eyes in the dormitory
The latest model, with video card bracket!Streaming light rgb effect, glass on both sides, tempered glass on the side, very pure at night, completely unable to feel the presence of glass!With the light effect of the host, it is simply not too good!There are also many cooling positions in the chassis. The iron armor is thick, the quality is very good, and the price is very friendly!!!
Most dissatisfied
The appearance should be standard. I hope the manufacturer can upgrade the appearance of the products more when they are produced
summary
The price is close to the people, and the product is worth the price. It's very good and worth getting started!
The chassis is very beautiful, with USB3.0 interface and card reader interface, very good.The seam of the chassis is irregular, but acceptable
Most dissatisfied
There are two fans on the top of the box, but the screws are provided, but there are no nuts. How can I install them
summary
It's OK. One of the 24 pin power supply interfaces of the killer board can't reach the iron plate. When plugging in the cable, pay attention to the two more openings on the north line
The appearance is beautiful in white and black. Two LED fans are also presented for purchase. The interior is large enough, with two USB ports 2.0 3.0 and blue standby eye-catching lights.There is a dust-proof screen at the top and bottom, which can accommodate the 305MM graphics card. The SSD position and mechanical position are sufficient, and it supports the back line.
Most dissatisfied
When I bought it, I asked the customer service whether they could put down the 300mm video card. The customer service answered that they could not put it down after they took it back.It is too wide. It is recommended not to use this case for the Yingzhong Super Ice Dragon series.
The product is simple, fashionable, and the style is similar to that of Apple. It is suitable for families, especially the simple style of our home decoration!Then the iron mesh can be equipped with mesh, which is good for heat dissipation!
Most dissatisfied
The white design will be more perfect if the effect is soft enough
This is a tall chassis with simple shape and style. I like this design very much. The blue light emitted by the side view is also very beautiful when working. It's worth sending two fans
The product design is very simple. It's good for home and office. It's a very practical product. The workmanship and back line are designed very well. After using Patriot's products for many years, Patriot's products are guaranteed
Most dissatisfied
I haven't started yet. I will post on the forum after I buy it
summary
It's a product worth buying. It's also very cost-effective. I'm going to replace the chassis after decorating the house
Price performance ratio=I bought the M2 PRO at the beginning of 200, but there are many options. Functional features=The air duct of the tank enclosure is poor, and the cover should be opened frequently for ventilation and cooling.There is no vertical display card position, and there are very few air inlets. Product workmanship=the plate is very thick, and the workmanship is also good. Appearance design=I bought black, easy to leave fingerprints and sweat stains
Most dissatisfied
Price performance ratio=I bought the M2 PRO at the beginning of 200, but there are many options. Functional features=The air duct of the tank enclosure is poor, and the cover should be opened frequently for ventilation and cooling.There is no vertical display card position, and there are very few air inlets. Product workmanship=the plate is very thick, and the workmanship is also good. Appearance design=I bought black, easy to leave fingerprints and sweat stains
After receiving the product and installing the machine, it is really beautiful, grand, clean, and very comfortable to look at. Now the chassis is made in Apple style, and you can also add graffiti on it, ha ha
Most dissatisfied
It would be even more perfect to send a case dust cover.
