This article was last revised 470 days ago, and some of the information may be out of date.If you need to update urgently, please leave a message in the comment area below.
First let's say the conclusion: brush is not recommended.
At present, there are too few cleaning packages for Xiaomi 11. There are only four on xda: Lineage OS, DerpFest R, ShapeShift OS and Evolution. The system version is still on Android 11.It can be counted with one slap.At this stage, there is no way to make you feel better.
Take a look at the MI11X next door, that is, the domestic Redmi K40. There are three pages of content related to the brush bag, and many A12 bags.
Sure enough, Xiaomi is orthodox in Redmi.
Secondly, because these classes are all born by the same father, AOSP(It seems to be nonsense)Although it is not simple, it is not completely Chinese.
In addition, native ROMs of all systems will add their own enhanced settings to the system. Although most of these functions are very practical, they are incompatible with the design style of the whole system.I don't like it very much.
Finally, the class native is excellent in terms of fluency and visual experience, and there are really too few functions.If you are used to MIUI, class primitives are not easy to use at all.
It's just that my favorite PixelExperience has not yet adapted to Xiaomi 11. Damn it!I can't help it. I can only try a recently updated system.
The phone needs to be unlocked. Please refer to the "Xiaomi 11 Brush Record".The following contents all default that your phone has been unlocked, drivers have been installed on the computer, and USB debugging has been turned on.
Because the original class of Xiaomi 11 has not yet been adapted to Android 12, even if Recovery and the system are brushed in, it will be stuck in the boot interface.What's more, no one in the xda community makes the bottom package of Android 11.Therefore, if you are an internal test user of MIUI Android 12, you need to downgrade the line brush back to Android 11.It's hard to resist.
Wire brush degradation
If your system is not Android 12, you can skip this section.
After downloading the wire brushing package, unzip it.You need to extract the folder.
The following steps mainly refer to "General wire brush tutorial".In order to release both hands as much as possible, the "Adb tool", double click after decompressionOpen CMD command line.batOpen.
Let's go over it.
Open USB debugging in mobile phone developer mode, connect the data cable to the computer, and input in adb tooladb devices
After successfully returning the mobile phone serial number, enteradb reboot bootloaderRestart to fastboot mode
Open the MiFlash wire brush tool and check the bottomDelete all, click Load Device,choiceUnzip the folder of wire brush package, and then clickBrush machineJust do it
The following figure shows the prompt after finishing the line brushsuccess, and the phone will restart automatically.
If you do not log out the Xiaomi account before the machine is flushed, you should also enter the password of the Xiaomi account.Quickly walk through boot boot, open USB debugging, and prepare to brush class native.
Download the brush package
You can go to xda by yourselfXiaomi 11Search for the machine cleaning package. Here are some things I see:
The path can be directly dragged by referring to this figure;You can also right-click to copy rec and paste it into the console as a path.
Restart to Recovery after prompting OKAY:fastboot reboot recovery
Long like this
Yes, I took this picture. This rec can't even take a screenshot, just like the rec in the era of lollipop.
Clear system data
The volume key moves up and down, and the power key confirms.Move to firstAdvanced, foundEnable adb, confirm, and it will automatically return to the initial interface.
Then move toFactory recet, SelectFormat data/factory reset,
Press the power key, a warning will pop up, confirm, and prompt "Wiping data..." at the lower left corner of the screen, which is the step of clearing data.
The machine can be cleaned after execution.
I don't want to complain. It shows that you are in the middle, but the R angle is not complete
Brush in ROM package
The data cable should still be connected to the computer, and the adb tool has not been turned off. The system has started to be refreshed.Withadb sideloadThe mode should be called "adb side loading". This is the first time for me to use it.
Find in the rec interfaceApply update, power key OK, findApply from ADB, the power key determines.
Brush the machine.Very simple, just one command:Adb sideload "brush package path", the path is still the method of dragging the file
D:\mikusa\ADB Tool>adb sideload E:\DerpFest-11-Official-venus-20211106-2335.zipserving: 'E:\DerpFest-11-Official-venus-20211106-2335.zip' (~47%) adb: failed to read command: No error
The computer console will stop at 47%. Don't panic, just move the cell phone rec.
The same method is also used for importing magisk,Adb sideload "magic path", but you will be prompted "Signature verification failed Install anyway?", and select "Yes".The magisk can wait until it successfully enters the system.
Exit after brushingApply updateMode, return to the main interface of RCE, and findFactory recet, SelectFormat data/factory resetClear the data again, or the system will not start.I don't know why, but just clear it up.
Then findReboot System nowThe power button determines to restart the system. Generally, the startup animation will enter the system after one minute.
Alas, I'm really over the age of brushing the machine.More and more not keen on playing computer.For me, backing up, transferring data, downloading the system, and cleaning the computer were things that I had come at my fingertips, but now I feel extremely cumbersome.I also can't accept the beauty of quasi primitive incompleteness, nor am I willing to spend time on beautifying the system.I hope to simplify everything, I hope to use it out of the box
This is the continuous loss of "brush power". I probably won't brush the machine again.
(It won't be painted this year, and the flag can't be set too hard.)
follow-up
The next day, I brushed back MIUI. MIUI really smells good.
Copyright notice:Unless otherwise stated, all articles are my own creation. Please contact the author for reprinting and quotation, and indicate the source (author, original link, etc.).
• Please fill in the real email when commenting so that you can receive the reply reminder. • Initial comments need to be reviewed, and comments irrelevant to the article should be posted on the message page.
When I swipe the ROM, I will ask Sig na ture ver i fi ca tion failed In stall any way?,After Yes is selected, direct import fails, Error 21.
The Rec: lineage-20.0-20240330-nightly-lancelot-signed.zip of this package is used.The package is CrDroid Android 14 official support version (crDroid Android 14.0-20240120-lancellot-v10.1_2. zip), SuperorOS official version (SuperorOS-Fourteen-lancelot-GAPPS-RELEASE-20240118-1006. zip)
The device is Redmi9
There are too few applicable Recovery, and an orange fox is not available yet. PBRP has brushed the bricks directly, and deep brush saved it. It has tried several times, several times of Recovery, and several times of deep brush.
But I found that the package I painted is A14, and the system is A13. Maybe it has something to do with this?But I just want to use the A14 bag...TAT
The main reason is that A14 has a new return arrow and a Rom logo on the interface, which I think is pretty good. A13 also has ROMs, but I don't know how to do it.This time, my mind was about to collapse, and there was a power outage in the middle...It will not be refreshed back to LineageOS until 10:00 p.m. (that is, now)
Iconfify sent it. What's the future of LineageOS beautification? The starter icon package is not available,
Now, we need to reconfigure again...
But I'll try to use the CrDroid of A13 later. Anyway, the data has been backed up. Wait for my message
Mi 11, I saw the official package Pixel Experience 12.1 plus, and brushed it...Everything is good in the whole ecology, even unlimited upload of photo albums! Disadvantages, blogger, you said, MIUI really smells good! The main feeling is that there are 4 less samples: Wallet (NFC access control) Quick charge Incoming call firewall
Call recording
After 2 hours of experience, I went to brush the machine
I want to ask the boss, my Xiaomi 11pro is a little hot, and I want to brush a third-party rom. I just went to the xda website you gave me, and found a version of evolution, which also belongs to a third-party rom. Last time, I brushed the rom package of LineageOS for the standby Hongmi note7, but there was no xiaomi11pro in Lineos, and then I found your post,So the package provided on the xda website is essentially the same as the package provided in lineOS. Or is the xda package less driven? Can you use it after brushing.
Just send a comment. It's useless to send it repeatedly.I deleted the other one. As for the machine cleaning package, XDA can find it. If you can click basic English, you can look at the installation steps in the post. Follow the steps to be sure there is no problem.Or install a Ku'an to see if anyone has written detailed steps?I don't have a machine, so I can't write
Oh, well, Sheila, I have time to back up the machine.The comment was submitted for the first time. It has not been moved for a long time. It is refreshed and returned. Ha ha
Evolution has applied, and then applied TWRP and magisk. At present, it is running well. Before, it was mainly due to the fast power down, which may be the reason why MIUI was too fancy. However, evolution has also integrated the Google Family Bucket. I haven't seen the Google Family grow stronger for several years...I want to use titanium backup to unload it, but I didn't expect that titanium backup has also declined. Alas, time is fleeting. Let's freeze it first. Let's see how it looks for a while
One more thing, the Android 13 used by Evolution mars is running smoothly at present. It may be that there are not many applications installed, and the power consumption and heat generation are not as high as MIUI13. After all, the original MIUI products are pushed more.The disadvantage is that there is no original application of Millika camera for the time being,Rom has its own Android native camera, but I see that the author said in the forum that this package has a built-in Xiaomi camera. I don't know whether it was my mistake or why. There is also a recorder that can record WeChat QQ voice that comes with MIUI. In addition, for fear of being driven by GPU, I used 3dmark to run a score. As a result, it is not outstanding in the middle level of the same model,It has not been tested when using MIUI before, so it is impossible to compare whether it has improved or decreased, but at least it means that the GPU has run.The advantage is that Evluation has a customization function that allows Google album to regard Xiaomi 11pro as a pixel, so it can upload unlimited photos and videos of original quality. This is really great...Then 60-120 frames can be automatically adjusted. This is a built-in feature of Android 13, which can save a lot of power than the MIUI's 120 frames. I didn't notice whether the MIUI can adapt before. Anyway, MIUI12 doesn't seem to have.There are still many other functions left. After using them, I realized that Android 13 came with it instead of MIUI customization. The demand is really enough.A few years ago, Rom, who would always brush the machine, became popular in China. I don't know how many hands he has turned. Now, the boss finally let me know that there was an XDA. Thank you.
The stationmaster asks if m11pro can directly use the package of m11?It seems that I haven't seen the 11pro page (or what's the name of the overseas version
Yes, but if you upgrade MIUI13, you will be downgraded... because this package is still A11 ⌇ ﹏ ⌇ What about this bag? It's not very easy to use. I don't recommend brushing it (ᗜ˰ᗜᗜ)
Yes, I'm ready to try it now (after experiencing for 1 hour, I suddenly feel that miui is really good → _ →).But I am very good. I have never brushed TWRP before. The result may not be accurate.