Advantages of polished tiles: being loaded 1. Advantages 1: no radioactive elements: natural stone is a mineral and has not been sintered at high temperature, so it contains some trace radioactive elements, which will be harmful to human health after long-term contact; Polished tiles will not cause harm to human body; 2. Advantage 2: basically controllable without color difference: natural stones have large color difference due to different rock formation time and rock layer depth, polished tiles have been carefully prepared, and the same batch of products have the same design and color, basically without color difference; 3. Advantages 3: high bending strength: natural stones are formed naturally, with different forming time and weathering, resulting in different compactness and strength; Polished brick is pressed by thousands of tons of hydraulic press, and then sintered at high temperature above 1200 ℃, with high strength; 4. Advantages 4: thin bricks and light weight: natural stones are thick and heavy due to their low strength, which increases the load weight of buildings on the floor, poses a potential threat, increases costs, and increases difficulties in transportation and paving. 5. Advantage 5: anti-skid: it is very important for the floor tiles to be safe and anti-skid, especially for families with elderly and children, they pay more attention to the anti-skid effect of tiles. The surface of polished tiles is smooth and bright, and many consumers think that its anti-skid effect is poor. If water is sprinkled, it will increase the potential safety hazard, so they have to avoid it and choose matt tiles with "restrained light". In fact, all polished tiles are anti slip. If there is soil on the tile, it will slip, but if there is water, it will be astringent. Therefore, as long as daily cleaning is done, its anti slip effect will not be affected. In terms of anti-skid performance, polished tiles and matt tiles are the same.
Polished brick Polished brick is loved by consumers because of its hardness, wear resistance, and suitability for large area indoor and outdoor paving. However, the concave and convex pores left by the polished tiles during manufacture will hide dirt and incrustation, which makes the surface easy to infiltrate pollutants, and even some tea poured on the polished tiles are powerless. Maybe the industry realized this. Later, some high-quality polished tiles were added with an antifouling layer when leaving the factory, but this layer of antifouling layer made the polished tiles lose the effect of full body tiles. If you want to continue the whole body, you have to continue to brush the protective layer. The decoration industry also has the practice of applying water wax before construction to prevent fouling. Polished tile antifouling technology is in the forefront in Italy, Spain and other European and American countries, and only a few first-line brands in China have such antifouling technology. Therefore, antifouling technology has become a required course for good polished brick products. The polished tile effect glaze is different from the decoration methods such as infiltrating flowers and large particles. It uses special special frit mixed with the base material, pressed or applied to the tile surface through special screen printing. After burning, it is polished to produce decorative effects such as particles or patterns of different colors. If you know what kind of polished tiles are good for laying, how can you identify them?