Laolai is not bad

Diatom mud is a popular wall material at the moment. Its advantages are very obvious. It won the attention and favor of consumers just because it is free of pollution and formaldehyde. Diatom mud can also be properly decorated with colors and patterns, so it is a good way to choose diatom mud for wall decoration. However, because the price of diatom mud is on the high side, some people want to save some construction costs. They want to paint diatom mud walls themselves, but they don't know whether they can. Can they paint diatom mud themselves? Of course, we can, but we don't have a little foundation, so we dare not do it. We are afraid of wasting materials and damaging the walls of our homes. So it is necessary to learn and master the relevant wall painting skills, so that we can paint our own diatom mud walls reliably. 1. Construction process flow of diatom mud self brushing wall: 1) Pave the special film, protect the existing finished products before construction, and protect the places outside the construction surface in advance; 2) Use a small blade to treat the flatness of the wall; 3) Protect the door edge, wall corner, skirting line and socket with domestic textured paper; 4) Stir the diatom mud in a wide place. Details of mixing diatom mud: a. Disassemble the diatom mud box, open the inner package and pour it into the prepared clean bucket; b. Use another bucket to connect with proper clean water; c. Pour clean water into the previous diatom mud material bucket (note: do not spill out of the bucket slowly); d. Add water at a ratio of 1:1; e. Connect the mixer cable to the socket and insert the three hole socket (note: please check whether the mixer is closed before connecting); f. Hold the agitator tightly and put it into the barrel for mixing, and use a variety of methods such as clockwise, counterclockwise, up and down for mixing (note: the initial mixing may be viscous and laborious, just continue mixing); g. The mixing time should be controlled at about 10 minutes (check the thinness and consistency of the material at the specific time. Generally, dig out the point material vertically with a small shovel after mixing to see if it falls down slowly. If it is left soon, the material is too thin; if it does not fall, it is too thick, continue to add water or material, and mix again). Can diatom mud be brushed by oneself? The diatom mud should be stirred evenly before brushing the wall, which is related to the color of the wall and the beauty of the wall. 2. The specific operation of diatom mud brushing the wall (1) Use a wool roller to roll paint on the wall, and the roller is even and naturally dry. (2) Select one of the combined stencils and spray 3M adhesive on the back evenly. (3) Fix the stencil board to the wall according to the height requirements of the construction effect. (4) Stick masking tape on the wall where the alignment point is located, and smooth the stencil board by hand. (5) Apply a proper amount of metallic paint with a sponge roller. After the adhesive is even, roll coat the pattern part evenly. (6) Gently connect the stencil plate to prevent touching the pattern part and wait for it to dry naturally. (7) Spray 3M self-adhesive on the back of the matched stencil plate, align it through the alignment hole, and fix it on the wall. 3. Precautions for diatom mud self brushing walls Can diatom mud be brushed by itself? We should pay attention to these things when painting the wall with diatom mud: (1) diatom mud is waterproof and moisture-proof during storage and transportation. Avoid placing directly on wet ground. (2) The effective storage period of diatom mud is one year. It should be used up as soon as possible after opening, and other ingredients should not be added. (3) Before the construction of diatom mud, the existing finished products shall be well protected, and the places outside the construction surface shall be protected with curing materials in advance. (4) When mixing diatom mud materials, please pay attention to the use of masks and other protective articles, and add clean water in strict accordance with the specified proportion, and use an electric mixer to fully mix evenly, so as to avoid causing color difference in the finish. (5) The empty or cracked base must be treated in advance, and the base shall be painted with oil or pre scraped with paint when necessary. (6) During the construction of diatom mud, avoid direct exposure to the sun, and pay attention not to use air conditioners, fans or open windows for ventilation. Drying is too fast, which increases the difficulty of texture construction. (7) It usually takes 48 hours for diatom mud to be completely dried, and do not touch it within 48 hours. After 48 hours, a small amount of water can be sprayed with a watering can, and after drying, the floating materials on the surface can be removed with a dry clean towel or sponge foam. Can diatom mud be brushed by oneself? Now you don't have to doubt. Learn a little about the diatom mud wall painting technology. The diatom mud can not only be painted by yourself, but also be painted beautifully, saving a lot of labor construction costs. Q&A of netizens: Is it reliable to buy diatom mud and paint it yourself at home? Answer: diatom mud can be brushed by yourself. Of course, if you brush it yourself, you should learn more about relevant knowledge. Related link: the first three core issues of diatom mud construction

For many fans, old porcelain pieces can be called bookmarks of history. Under the 1500x electron microscope, these old porcelain pieces have shown different beauty. 1、 Kiln Site Series Ding Kiln Old Porcelain Piece Ding Kiln is located in Jianzi Village, Quyang, Baoding City, Hebei Province, and East West Yanchuan Village. It was named because it belonged to Dingzhou in the Song Dynasty. Ding Kiln was founded in the Tang Dynasty, flourished in the Northern Song Dynasty and the Jin Dynasty, and finally came to the Yuan Dynasty. It is famous for producing white porcelain. It also burns black glaze, paste glaze, and glazed porcelain, which are called "Heiding", "Ziding", and "Lvding" in the literature. Longquan Kiln, an old porcelain piece of Longquan Kiln, got its name because it is located in Longquan County, Zhejiang Province, and belongs to the celadon system in southern China. Longquan Kiln was founded in the early Northern Song Dynasty, reached its peak in the middle and late Southern Song Dynasty, and gradually declined after the middle of the Ming Dynasty. 2、 The Song Dynasty series The Song Dynasty is a very prosperous period in the history of the development of traditional porcelain technology. The ancient ceramic sites discovered now are distributed in 170 counties across the country, including 130 counties with kiln sites of the Song Dynasty, accounting for 75% of the total. Fragments of Southern Song Dynasty printed calipers, Song Dynasty carved bowl No. 3, Song Dynasty rabbit hair calipers, Ming Dynasty blue and white porcelain series have a profound impact on Chinese blue and white porcelain, and different blue and white cobalt materials of different ages can well adapt to various themes of Chinese painting. The painting of blue and white porcelain uses traditional brushes to complete the painting with various lines, stippling and rendering. Ming Dynasty Blue and White Plate No. 1 Ming Dynasty Blue and White Plate No. 2 Ming Dynasty Blue and White Bowl No. 2 Ming Dynasty Blue and White Bowl No. 3 Tea Language Network, an oriental life aesthetics platform based on tea, integrates multiple communication channels such as websites (PC end, WAP end), apps, WeChat, and microblog. [Tea Talk and Tea Comment] It is known as the Robert Parker Index of Chinese tea; Thousands of tea reviews, from the perspective of consumers. [Tea Language Market] Gather masters and collectors in the tea industry, and strictly select thousands of authentic tea and tea sets. [Tea language article] Timely report tea industry news and promote Chinese tea culture. [Tea circle] A gathering community of tea lovers. Tea lovers can help you answer your questions, and a lot of tea party invitation information. Porcelain. Porcelain chip Porcelain is the key.... Porcelain

The bathroom cabinet is seriously deformed ★ The problem shows that most people like to make a small cabinet under the washstand in the bathroom as a place to store bathroom supplies. This kind of cabinet is mostly made of density board. After a period of use, beautiful cabinets are easy to deform, and even shake with a little force. Some cabinet doors simply cannot be opened. ★ The analysis density board is often considered as a very solid material that is not easy to deform, but the simple solid board does not mean that it is also solid after being made into a cabinet. The surface of the density board is generally sealed with a plastic hard film, which can not only be beautiful, but also waterproof. However, the joints of density boards are generally fragile, and it is easy to produce cracks due to man-made damage or collision during transportation and processing. If moisture permeates into the interior along the gap, it will pulverize the density board and cause deformation. ★ Solution ① When the bathroom cabinet is installed on the site, it is often necessary to cut holes on the cabinet according to the site size, install water supply and drainage or fix them. These operations will damage the protective film of the density board. The break must be sealed with glue to ensure that water and gas will not penetrate through the break into the inside of the density plate, causing deformation. ② The quality of the bathroom cabinet board should be superior, and attention should be paid to the environmental protection index. The surface of a good plate is smooth, the corners are closely connected, and no interface can be seen. The poor material interface is obvious, and I wish I could tear off the surface film with my hands, which is very unstable. ③ Collision shall be avoided during the transportation of the cabinet. Any collision will damage the protective film on the surface of the plate. ④ Solid wood cabinets should be carefully selected in the bathroom. Although solid wood furniture looks beautiful, it is more likely to deform in a humid environment for a long time. Netizen comments

When the old houses were decorated in the past, there was generally no "sunshine room" that was very good. At that time, they were mainly made of stainless steel, which was not beautiful. Moreover, the balcony does not pursue the so-called beauty. There are chicken, duck and fish farmers. Today, I would like to share with you the transformation of the old balcony. This is a house that has lived for more than ten years. It is a bit shabby, and has a stainless steel shed that was made earlier. Now the host family wants to rebuild the balcony and make a sunshine room to be used as a study here. I plan to build a zigzag sunshine room, which will look more beautiful and comfortable. Make a sliding door at the entrance. It doesn't take up space. But the glass eaves on the top are 50 cm away, which will help cover the rain in rainy days. The other three sides are opened horizontally for ventilation. The corner of the balcony will be transformed into a fishpond with a little cobblestone around. It will be more comfortable. Flowers and plants are indispensable. In the blooming season, the fragrance of flowers is all over the garden. That's all for my sharing today. If you like the experience and experience I share, you can follow me or comment on me. These are designed by myself, and I will share more with you later, although there is no flowery rhetoric and sensational language. But I still hope it can help everyone. Do netizens comment on Fujian? Yes, but the house types are different.//@ Ah Qing 25: Are there any in Fujian?

In ancient times, when porcelain was broken, most people might throw it away. However, the broken pieces of porcelain left behind today have become treasures that people compete to collect. Nowadays, the price of porcelain fragment specimens has risen significantly. In particular, precious, rare specimens that can see more information are hard to find. If a blue and white specimen of the Yuan Dynasty is painted brilliantly, if its hair color is particularly bright, if its shape is very rare, and if it can represent the high technology of the Yuan Dynasty, the price will be in short supply. Porcelain chip is not only a piece of debris, but also a tool for us to know the authentic ancient ceramics. We can feel the appreciation information brought by ancient old porcelain through the sample of porcelain chip. It is precisely this feature that many ancient ceramic lovers are struggling to find these pieces, and it is also the fact that people who learn to appreciate ceramics are increasingly aware of this fact, Porcelain chip specimens were recognized, snapped up and hyped by more collectors. After all, only a few ancient porcelains have been preserved intact. As the saying goes, "ten old and nine broken", many ancient porcelains are often damaged and broken due to the long history or man-made destruction. As the porcelain produced in some typical kilns in ancient times, it often becomes an important material evidence basis for our later generations to study and archaeology ancient culture, so it is of great significance. For example, the fragments of some famous kilns also have strong research value and collection value, such as the five famous kilns (Ru, Ge, Ding, Jun, Guan) of the Southern Song Dynasty, Longquan Kiln, Yuan blue and white porcelain pieces, etc, They all have high collection value. Ancient porcelain fragments have important historical value and research value. Collection is not just for the purpose of "getting rich overnight", but also for the purpose of making more profits from collections. More importantly, it is to inherit culture, promote civilization, expand knowledge and cultivate temperament. Ancient porcelain fragments themselves carry a large amount of cultural connotation and historical information. We can get a glimpse of the data information and social comprehensive cultural information of a certain period of history from the patterns, characters, colors, body glazes, opening pieces and other aspects and details of ancient porcelain fragments, so as to know the autumn from one leaf. At present, there are many calligraphers, painters, historians and archaeologists at home and abroad who explore, learn, appreciate and speculate on the ancient social culture, painting techniques, historical information and artistic charm of calligraphy from the fragments of ancient porcelain. Ancient porcelain fragments are cheap teaching materials for collectors. For ancient porcelain collectors, it is not enough to grasp the theory, but also to have physical verification, and the effect of physical teaching is often higher than the theoretical guidance. As ancient porcelain fragments carry a certain amount of comprehensive information and cultural elements, they are really good material teaching materials for porcelain collectors. Many porcelain collectors, when learning about ancient porcelain, usually go to the museum to see the objects on display through the glass. This learning method is far from playing with broken porcelain in hand. Face to face learning is more direct, more effective and more realistic. Therefore, as a kind of material teaching material, the role of ancient porcelain fragments is very great, and it should not be underestimated. There is a kind of fragmentary beauty in the fragments of ancient porcelain. The porcelain pieces are broken in time, but they still give people a shock and enjoyment of beauty. Collection lovers can even imagine or deduce the perfection and artistic beauty of the whole porcelain from fragments of ancient porcelain pieces. Some fragments of ancient porcelain still retain the beautiful moments and details of ancient porcelain. It's really a blessing for collectors to find such collections. At the same time, precious cultural relics are still preserved in the fragments of ancient porcelain. Although some pieces of ancient porcelain can not be completed, they still retain the value of historical relics in some details, which can be said to be incomplete without losing their value. In the Palace Museum in Beijing, there is a "Qing Dynasty Kangxi Colorful Lady Baby Play Basin", which is a combination of ancient porcelain fragments. Although it is a combination of fragments, it is very typical among the Kangxi Colorful Wares, and the only one left in the world, which is priceless enough to describe its preciousness. Fragments of ancient porcelain are not renewable, and their survival is limited. In addition, they also have an "ancient" character, which determines that their future value will be high. As the saying goes, scarcity is the most important thing. When the fragments of ancient porcelain gradually become scarce or even disappear from people's vision, they have become a kind of historical relics. In particular, a large number of porcelain pieces were produced in the imperial kilns. The royal government had officials specially responsible for the firing of such porcelain pieces, who stationed in the kilns to supervise the production. In addition, the production cost was not counted, and precision innovation was made. For example, if the emperor requires this batch of 100 pieces of porcelain to be made, then more than hundreds of pieces must be fired. After 100 pieces of porcelain are carefully selected, all the remaining porcelains must be broken and buried deep, and no piece is allowed to flow into the folk. These precious porcelain pieces are even more difficult to find. Ancient porcelain pieces are the tangible witness of the brilliant changes of ancient ceramics that we clearly see. Many collectors recognize that the varieties of ancient porcelain pieces are very precious and have never seen them in the collection handed down from generation to generation, which makes up for many gaps in the appreciation of ancient ceramics collection, and at the same time increases our knowledge of ancient ceramics varieties.

Why does a carpenter never make a top cabinet when he makes a wardrobe? After listening to his explanation, he immediately replaced the traditional big wardrobe at home, which is composed of wardrobe and top cabinet. The overall appearance is relatively high, and thick quilts and overcoats can be put on the top cabinet to save space for hanging clothes. But is this design really as practical as we think? I recently talked to a wardrobe designer about this question, and his answer is no, and he said that this kind of wardrobe is not cost-effective. Now let's take a look at his different views. First of all, it takes a lot of wood to manufacture such a large wardrobe, and the cost of time and materials is relatively high. And many families do not need such a wardrobe, because there are many places to store things at home, and it is not necessary to put things on the top cabinet. Secondly, the top cabinet is located at a relatively high position. If you want to put or take things, you must use a ladder or chair. Generally, women do housework and tidy up things. It is too troublesome for them to climb to such a high place to pick up and put things. If things are too heavy, they may not be able to lift or fall down due to loss of balance, which is dangerous. Then, thick quilts and coats on the top cabinet are easy to forget to take care of and dry because of neglect. In case of plum rain weather, it is easy to get damp and moldy. In fact, it is suggested that we should purchase some vacuum compression bags and put the unused clothes and quilts in the vacuum compression bags to save space and facilitate storage. Such a tall wardrobe will occupy a larger part of the house, which is easy to give people a sense of depression. Also, the wardrobe is too high and too close to the ceiling. Once the ceiling leaks, it is easy to wet clothes. If you want to move it, it is too heavy and difficult to move. Such a bulky wardrobe with low space utilization rate is really not as practical as we think. Netizens' comments are better than others. They don't have too much dust on the top. Fools, they don't have enough dust on the top. It is better to climb up and down than half a dusty and ugly wardrobe. Buy what you need and don't buy what you don't need. The top cabinet is very good. It saves space. It's good for bedding

House decoration and painting is an important process. Recently, many owners asked Xiaobian how to apply emulsion paint? How many times is appropriate? When is the painting better? Xiao Bian has consulted the old painter with 10 years of decoration experience to give you a detailed answer! [How to brush emulsion paint?] Brushing: the advantages are strong flexibility, simple construction and paint saving; The disadvantage is low efficiency, easy to produce brush marks, sagging, uneven painting defects. Roller coating: it has the advantage of high construction efficiency; The disadvantage is that roll marks are easy to appear, and the visual effect is general. Spraying: the advantages are fast spraying speed, uniform coating thickness, smooth and delicate feel quality; The disadvantage is that it is easy to pollute the environment and waste materials. [How many times should the emulsion paint be painted?] 1. According to the flatness of the cement surface, the interior wall needs to be puttied for 1-3 times. First, the wall surface should be leveled and polished, then the primer should be painted for 1 time, and then the wall paint should be painted for 2 times (commonly known as two sides and one bottom). Note: The internal wall emulsion paint shall not be applied for more than 4 times, for fear that the paint film is too thick and the room humidity is too low, which may cause the paint film to crack. 2. The base course of the exterior wall shall be cleaned, and then mixed with Shuangfei powder and cooked rubber powder for priming. Then it is to paint emulsion paint, and the surface layer needs to be painted twice to three times. [When is it better to paint?] It is required that the construction environment temperature should not be lower than 5 ℃ and the relative humidity should not be higher than 85%. Therefore, latex paint should not be painted in rainy season, yellow plum days, and winter when the temperature is lower than 5 ℃. It is better to brush emulsion paint in sunny and dry weather. Note: This article was originally created by Guojiajia Decoration Network, and cannot be reproduced without permission! If you want to know the house decoration quotation, you can click the large picture below to get a free decoration quotation. I am more qualified than you. I have been working for 40 years. The key is the putty of the base layer. The base layer should be painted twice directly. The coarse hair rolls and the fine hair is hard to finish. Remind readers, don't listen to the decoration company. Why roll primer? It is because the putty powder used in the base course is not strong. It is easy to apply small plaiting paint. It is easy to sand the skin, pit the owner, roll paint and bite the bottom. It is easy to roll the skin and fall off after a long time. Owners should be careful to buy their own materials. It's OK to see which decoration company does better, because decoration is also a subject. How can Shuangfei powder be used for exterior walls? Why not introduce the pure cement wall? I have seen a design of pure cement wall with solid wood, which is very beautiful. It is usually twice, but the paint is too thick to use. The best latex paint and wallpaper have formaldehyde, and their life is short. Now most customers choose diatom mud, which can absorb formaldehyde and has a life span of at least 20 years. If you need to decorate your house, you can consider collecting it decisively, and you can refer to it next time!

The common kitchen counter top is like this: the surface is beautiful, but it is practical. As you can see from the picture, the requirements for cooking and washing are different. It is not so convenient to use, as shown in the following figure. Therefore, according to ergonomics, there should be a difference between high and low when making cabinet countertops. Today, I will tell you what three aspects are used to decide. Front: The vegetable washing area should be higher than the cooking area. According to the requirements of ergonomics, the vegetable washing area should be set higher, so that it is more comfortable to wash vegetables standing up, and it is not afraid to wash them several times. On the contrary, the cooking area should be lower, so that it is not necessary to hold the pot to fry vegetables, and it is easier to use. As shown in the following figure, the general kitchen will divide the areas from high to low, namely, washing, cutting and cooking. 2 The operation area and electrical table shall be separated. In the daily use of the kitchen, we will use some electrical appliances. At this time, we have separated the electrical appliances area from the washing, cutting and frying area, which is easy to use and also avoids some hidden safety hazards caused by children's access. If the house is a small family, you may as well embed the washing machine and dishwasher into the cabinet, which will save a lot of space. 3. There is no fixed standard to determine the height of the cabinet according to the height of the table. It is more important to experience the height of the cabinet according to your own height, then determine the height of the cabinet. The difference between the height of the table and the height of the table is 2 or 3 cm, and the experience of using it is also different. However, the high and low countertops also have many shortcomings. For example, it is difficult to make the high and low countertops into an overall cabinet, so the aesthetic degree is not so good, and there is a risk of water seepage between the gaps of the high and low countertops. Therefore, it is necessary to select a better one when selecting merchants. I want to say it's really ugly. If you need quartz stone in Beijing, you can talk about it... The price is reasonable. Kitchen decoration is useful

Yesterday, the Asia Exhibition Hall of Shanghai Green Ceramics Exhibition ushered in a wave of craze, a blockbuster activity - the Asia Large Plate Marble Tile Special Product Recommendation Fair - and the Laokela Designer Recommendation Expo came strongly. Inside and outside the Asia exhibition hall, the audience was enthusiastic. Asia X Laokra International Designer Creative Arts Center opened high-end strategic cooperation. In this exhibition, in order to cooperate with the first appearance of large marble tiles in Shanghai Green Ceramics Exhibition, Asia specially cooperated with Laokra International Professional Joint Designer Firm to bring you a Laokra Designer Recommendation Expo. At the meeting, Qiu Boyun, Master of Architecture of Taiwan Chenggong University, Vice President of Shanghai Branch of International Architectural Decoration and Interior Design Association, and CEO of Laokra International Professional Joint Designer Firm, came to the scene to support Asia, introduce the meaning of Laokra to the audience, and expose the original intention and psychological process of Laokra's team of designers. Laokra designers refer to experienced designers with more than 30 years of design experience. Qiu, an architect, said he hoped to cooperate with Asia to create more high-end buildings. Mr. Su Bing, a well-known designer with strong ties to Asia, has 25 years of design experience, but he still humbly said that he was "a little junior". Mr. Su told that his affinity with Asia came from the time he designed his villa twenty years ago, when he used Asian tiles. I have been working in Asia for decades, and I have always had strong feelings for Asia. I will definitely have more cooperation cases with Asia in the future. Guo Zuming, a famous Asian designer from the Department of Environmental Arts of the Central Academy of Arts and Crafts, said in his speech that he was grateful to Asia for convening so many old friends to meet, and also had a good vision for future cooperation. Later, Mr. Ke Chuxi, the general manager of Asia Group Shanghai Branch, told all the designers present the story of Asia's brand. He said that "in recent years, Asia has made great progress in down-to-earth layout of the national market, growing very fast, and brand upgrading." At the same time, We sincerely invite you to participate in the Shanghai special event of Tencent Home Design Fashion Festival jointly named by Asia next month. As a leading ceramic tile brand in China, Asia is looking forward to working with designers to find the origin of design and contribute to Chinese architecture. It is based on this common intention that the designers of Asia and Laokra came together, and the two sides formally reached a strategic cooperation. How many secrets did the person in charge of Asia Shanghai reveal in the interview with Tencent Home? At the event site, President Ke, as the representative of the material supplier of the Shanghai Green Ceramics Exhibition, received an interview from Tencent Home Furnishing. He gave a comprehensive introduction to the characteristics of Asiatic large slab marble tiles, as well as the production concept of Asiatic green and environmental protection. Referring to the overall environment of transformation and upgrading of the entire industry, he expressed confidence in the future strategic development of Asia. Asia, the leader of large slab marble tiles, leads the trend of "large slab". Looking at this year's Shanghai Green Ceramic Exhibition, large specifications of tiles have been launched on various tile booths. Nobel and Champion Tiles exhibited 900 * 900mm large slab tiles, and New Zhongyuan exhibited 1800 * 900mm large slab tiles. Large scale tiles have become the favorite of the tile industry this year because they are more in line with the luxury style pursued by high-end people. As an earlier domestic ceramic tile manufacturer who proposed the concept of "large slab marble tile", Asia is not only following the trend, but also building momentum. It is now the first domestic enterprise with the ability to produce "large slab marble tile" independently. In February 2017, the production base in Hubei Province of Asia was officially put into operation, which means that the world's first production line specially customized for large slab marble tiles was successfully put into operation, which enables Asia to have the production capacity of large size tiles (1800 * 900, 3200 * 1600mm) that far exceeds the domestic level, fills the gap of domestic super size tiles, and marks that Asia has created a "big era" of ceramic tile industry. Since then, the whole industry has started a new trend of "big board", and many big brands have also launched "big board marble" series products. Big marble tile is attractive? Customers' eyes and hands have told us that the exhibition cycle has passed half, and the Asian exhibition hall is still full of people. Most of the products on display this time are new products in 2017, which has attracted many visitors and industry insiders. They can't help but feel the touch of marble tiles. More merchants who are very particular about building materials carefully studied the front and side of the slab marble 180 degrees, and said, "This is the real whole body.". Indeed, the Asiatic large slab marble adopts the original internationally leading four core technologies - 55 degree soft polishing technology, edge chamfering and non marking technology, mature three-dimensional sinking technology and full body technology, which can restore the texture of natural marble to a high degree, and can maintain the same pattern texture on the surface and inside even if it is cut arbitrarily in practical application, and the processing effect is consistent with natural stone. Are you itching to feel the marble? Xiao Bian has already felt it on the spot. The surface of Asiatic marble tile has a three-dimensional carved texture that can be touched, and it has a natural concave and convex feel like natural marble. If you want to come to the scene in person, we will make an appointment one day later!

Latex paint and wallpaper have their own characteristics, which should be decided according to your home style. The old driver of Yantai told you that the difference between the two is what advantages and disadvantages each has!!! Advantages of wallpaper: wallpaper has a wide range of colors and textures. Pure paper can be made into plane printing, PVC can be made into concave convex and sandblasting, and different materials can have different effects. You can easily use patterns to achieve the desired effect. This is difficult to achieve with emulsion paint. Different wallpaper can also make the room have different atmosphere and style. The contrast of stripes makes the room more layered, and the longitudinal stripes can have the effect of "pulling up the seedlings and promoting". Wallpaper can use large/small patterns to adjust the sense of space of the room. Because of the characteristics of wallpaper, it can play a very good sound absorption effect. Especially the type of surface bump treatment; In contrast to the wall with difficult cracks, wallpaper is a once and for all treatment. Latex paint film has limited effect on wall cracks, even if glass fiber mesh is pasted. Wallpaper solves this problem very well. If it is only because of cracking, the cost of selecting basic wallpaper for basic decors is not high. Disadvantages of wallpaper: there may be process defects such as seam, hollowing and edge warping. There will be a certain color difference, and the color difference of the same batch of products can be ignored. However, except for the basic color, the color difference of latex paint is much larger than that of wallpaper as long as there is a repair. These two points can be handled through control. Pure paper and non-woven wallpaper are combustible, but rest assured, they will not be as fierce as textiles and plastics. The cost of wallpaper is more expensive than latex paint. Advantages of latex paint: low cost, simple construction. You can mix colors flexibly to achieve your own color scheme. Remember to ask the construction party to keep some colored paint after decoration, which will inevitably bump when moving. The cost of re mixing colors and color cards are additional expenses. If the light color is damaged, it can be directly brushed for repair. If you want to redecorate or renovate in a few years, as long as the base course is OK, you can only repaint it on the original foundation. Disadvantages of emulsion paint: although color matching is possible, the color is single and there is no pattern. Some dark paints are difficult to grasp, so don't try them easily without the participation of professional designers; Latex paint is easy to crack. Netizens commented that latex paint is better for me anyway. Wallpapers will change color after a long time!