Datang New Material

CI system water-based industrial paint paste is a water-based resin free pigment paste prepared by adopting advanced processing technology and strict process control. This series of products have high pigment content, high coloring power, good color exhibition, and good chemical resistance, temperature resistance, light resistance and weather resistance. Good stability, long-term storage, good liquidity and pumpability. Haichuan CICI system water-based industrial paint color paste series has 9 colors, including carbon black, yellow iron red, blue iron red, iron yellow, phthalocyanine blue, phthalocyanine green, mono azo red, mono azo yellow and oxazine violet. The detailed parameters are as follows: the performance characteristics of CI system water-based industrial paint color paste series are applicable to metal protective water-based acrylic system, water-based epoxy system and water-based polyurethane system. It can be widely used in waterborne container paint, waterborne metal anti-corrosion paint, waterborne wood paint and other fields. The resin free color paste system has good compatibility with various water-based systems. As the main carrier, water has less volatile matter and meets the requirements of environmental protection. The pigment of CI water-based industrial paint paste series has very low heavy metal content, and the additives used do not contain APEO and formaldehyde. Meet color matching requirements and cover the entire color space. Application Guide The compatibility test must be carried out before using the color paste to avoid various paint film defects during use. The color paste needs to be kept in a uniform state before use and testing, to maintain the consistency of the color paste state and coloring power. The normal use temperature of the color paste is 5-40 ° C, and there is no obvious change in hue and color strength during the trial period. The color paste shall be placed in a ventilated, cool and dry place. The storage temperature is 0-40 ℃, and it is not suitable to be too cold or overheated. The storage objects shall be airtight, and shall be tightly covered after use to avoid long-term contact between the color paste and the air, and prevent the color paste particles from gathering and the surface from forming films. If some color pastes precipitate after long-term storage, they need to be fully stirred before use. Through flexible matching of color pastes, the system combination of purple, magenta and orange in different application fields can be realized. It is recommended that the user carry out the alkali resistance test of the actual paint film, add 5% color paste in the white base paint, soak in 2% NAOH solution for 24 hours, and evaluate the color change with DIN54001 gray card as reference. Packaging and transportation Product packaging specifications: 1kg, 1.5kg, 4kg, 7kg, 15kg, 30kg, 50kg plastic barrels; Product transportation: It can be transported as ordinary goods. Founded in October 2010, Shenzhen Haichuan New Material Technology Co., Ltd. is a wholly-owned subsidiary of Shenzhen Haichuan Industrial Co., Ltd. There are three business divisions, one central research and development institute, and one material testing center certified by the national CNAL. The headquarters is located in Shenzhen, Guangdong Province, and there are three production and research and development bases in Shanghai, Heyuan, Guangdong, and Jurong, Jiangsu. The company has passed the certification of ISO9001 quality system, ISO14001 environmental system and OHSAS18001 occupational health and safety management system. Its main business covers the four links of material research and development, production, sales and service of "green road" and "intelligent transportation". As an important high-tech enterprise, Haichuan enjoys national and provincial financial support and preferential policies.

Due to limited funds, many people prefer small size houses when buying houses. This kind of residential space is relatively small, which poses a problem for owners. How to decorate living rooms, bedrooms, kitchens, toilets and other living spaces in such a small space? What are the design methods for small apartments? Now let's share the main materials and auxiliary materials with you, hoping to help friends in need. 1、 Main materials and auxiliary materials 1. Main decoration materials include: (1) ceramic tiles: wall tiles, floor tiles, caulking agents, skirting, waist lines, flower pieces, artistic mosaics... (2) sanitary wares: faucets, floor drains, flushing valves, squatting toilets, water tanks, toilets, shower rooms, bathtubs, aluminum gusset plates... (3) floors: wooden floors, wooden skirting; Cupboards: cupboards, and their supporting baskets, rice boxes, sinks, hardware pendants, water purifiers... (4) Lamps: downlights, spotlights, floor lamps, wall lamps, ceiling lamps, various art pendant lamps... (5) Doors and windows: finished solid wood doors, plastic steel doors, aluminum alloy doors, sliding doors, wardrobe doors, balcony window seals, anti-theft windows, screen windows... (6) Hardware: hardware pendants, towel racks, roll paper boxes Clothes hanger, clothes pole/dressing mirror in wardrobe, clothes hook, door stopper, door lock... (7) Other materials: threshold stone, marble windowsill, wallpaper, mercury mirror... 2. Decoration auxiliary materials include: (1) sand, cement, red brick, paper faced gypsum board, socket switch bottom box and face plate, glass sound film, wood keel, light steel keel, waterproof paint, fireproof paint, antirust paint, paint Latex paint, kraft paper, paper tape, glass glue, heavy glue, opal glue, cellulose, anti cracking putty powder, putty powder, large core board, melamine board, nine inch board, veneer, plywood, PPR water pipe and water pipe accessories; (2) Aluminum plastic composite pipe, various types of connectors, valves, wires PVC wire pipe, wax proof pipe, hexagonal box, junction box, electrical tape, waterproof tape, raw material belt, nails of various lengths, mosquito nails, steel nails, projectiles, self tapping gong wire, blades, saw blades, color paste, greasy knife, trowel, sandpaper... II. In decoration, which materials are main materials and auxiliary materials, decoration materials can be roughly divided into main materials and auxiliary materials, and main materials refer to finished materials in decoration, Decorative materials and some functional materials. Auxiliary materials refer to auxiliary materials used in decoration. Auxiliary materials mainly include: plates, keels, cement, sand, bricks, waterproof materials, plumbing fittings, wires, putty, glue, wood paint, latex paint, hardware, floor drain angle valve soft connection, thermal insulation and sound insulation materials, etc, Solid wood composite floor and laminate floor. Solid wood composite floor and laminate floor can be used for geothermal ground. 2. Lamps are the main tools for lighting at night, and also have a specific decorative effect on the effect of space. The selection of lamps should consider the three points of practicality, beauty and energy conservation. 3. Sanitary appliances include toilet, hand basin and women's washing machine, Ceramic products such as cloth holding basin. The toilet seat can be divided into ordinary toilet seat and intelligent toilet seat according to the function, and can be divided into direct flushing and siphoning according to the flushing method. The hand basin can be divided into under platform basin and on platform basin, which can be selected according to personal preference. 4. Ceramic tile is a decorative material mainly used in the walls and floors of kitchens and toilets. It has the advantages of waterproof and scrub resistance, It can also be used for the floor paving of the living room and bedroom. At present, the most popular tiles on the market are glazed tiles, vitrified tiles and antique tiles. 3、 Relevant concept 1. Wall tiles Wall tiles (referred to as wall tiles) are applicable to the facade decoration of toilets, kitchens and outdoor balconies. Wall tiling is an effective way to protect the wall from water splashing. They are not only used for walls, but also for edge decoration of doors and windows. It is also an interesting decorative element. Used for decorative wall tiles at skirting line. That is, the beautiful and protective wall base is not easy to be dirtied by shoes, tables, chairs and stool feet. Tiles used in pools and bathrooms should be beautiful, moisture-proof and wear-resistant. 2. Main materials are those substances used by human beings to manufacture articles, devices, components, machines or other products. Materials are substances, but not all substances can be called materials. For example, fuels and chemical raw materials, industrial chemicals, food and drugs are generally not considered as materials. However, explosives and solid rocket propellants are generally called "energetic materials" because they are part of artillery or rockets. Materials are the material basis for human survival and development. Relevant recommended home decoration fresh air system aluminum square channel manufacturer introduction_ budget of main materials, auxiliary materials and labor cost should be considered when making aluminum square channel??

Many people think that there are fewer small apartments and it is easy to decorate them, so many people decorate their houses without hesitation. After finishing the decoration, they find that there are many details that are not well considered. After finishing the decoration, they regret it. Today, I sorted out some key points about the shortcomings of refined craftsman boards for you, and I hope it will be helpful to the friends who decorate. 1、 How to save money on the decoration of fine craftsman board 1. Home entry cabinet is essential for entering the door! A reasonably designed entry cabinet can perfectly handle the storage function at the entrance and bid farewell to the clutter. The black and white cabinet body, the door cover and the open partition are combined. The lower open partition is enough to store frequently worn shoes. It is convenient and breathable to take! Color contrast and screen the door to make the whole simple but not the design. 2. The living room is a public activity space in the home. As a place for us to entertain and gather, the decoration style of the living room usually leaves guests a very important first impression, and even affects people's mood. 3. Each living room of the TV cabinet will be equipped with a TV, if not a wall mounted TV, Then the TV cabinet will be used. The living room is actually the most difficult place to organize at home. There are many odds and ends, but the storage cabinets are crowded. It's really contradictory! 4. The living room storage cabinet is both a storage cabinet and a wine cabinet. Learn to live in a busy life! Wine cabinet is becoming more and more common in daily life. Wine cabinet is not only a storage existence, but also a symbol of identity and quality of life in a sense Buy the master bedroom! Without a big wardrobe, how can you let yourself buy and buy! Having a cloakroom is a dream of many people What kind of 5000 year Chinese civilization is the brand culture of refined craftsmen, which has precipitated respect for wood and also nurtured attachment to wood. The long history of wood culture in China also affects the understanding of refined craftsmen on wood. Some wise people say that when a technology reaches the acme, it can be called art. When a piece of wood "fits together", A precious piece of wood has realized an artistic and high-quality home experience. The craftsman of refined materials has thoroughly interpreted the wood culture. The craftsman of refined materials, a creator of excellent home quality, integrates fashion art, and interprets a high-quality, healthy and environmentally friendly life, which originates from details, high-quality materials, and craftsman! Fine craftsman health plate: from the fine selection of materials to the exquisite workmanship; From rigorous detection to attention to details; Every step of this process is filled with reverence for the forest. With the most outstanding quality, each piece of board becomes the most devout pilgrimage to nature. Third, the relevant concept craftsman ARTIZSTUDIO, a Korean craftsman, has a noticeable impact on global wedding photos. She has caused a wedding photo revolution in Los Angeles, Seoul, Singapore, Shanghai and other places. Her price is several times more expensive than that of other brands, but it still attracts newcomers! ARTIZSTUDIO's aesthetic history is subtle and meticulous. Those who know how to appreciate ARTIZSTUDIO have the personal characteristics of self-confidence, elegance and loyalty to their own style. When you no longer need to use luxury LOGO to express your fashion attitude, you can choose ARTIZSTUDIO. Relevant recommendations: top ten brands of Chinese plate fine craftsman: environmental quality fine craftsman home decoration design software top ten brands of Chinese fir eco board fine craftsman plate makes home more environmentally friendly top ten brands of plate fine craftsman: subtracting for decoration top ten brands of Chinese plate fine craftsman brand interview record [top ten prices of fine craftsman eco board in Shandong] Quotation_picture_brand plate Top 10 brand craftsman analysis of the advantages and disadvantages of ceramic tile vs. wood flooring Three layer solid wood thick core board craftsman plate real E0 level all say that the craftsman ecological board is good

The price of the house is still high. Some friends choose to buy a small house due to limited funds, but they want this house to reflect its value when decorating. It depends on the decoration materials and home furnishing. The quality of home furnishing and the quality of the paint used in decoration directly affect the effect after decoration. When it comes to waterproof materials, everyone pays attention. After all, it is about the safety and health of family members. 1、 What are the indoor waterproof materials? Precautions for waterproof treatment 1 K11 universal waterproof coating k11 universal waterproof coating is a two-component waterproof material. When the two materials are mixed, chemical reaction occurs, which not only forms the surface coating waterproof, but also can penetrate into the interior of the substrate to form crystals to prevent the passage of water, so as to achieve a dual waterproof effect. Features: rigid waterproof material, highlighting the bonding performance, is mainly used for waterproof and moisture-proof treatment of toilets, kitchens and bathrooms. 2 JS waterproof coating JS waterproof coating, J refers to polymer, S cement; That is, JS is a polymer cement waterproof coating, which has strong adhesion with the wet base surface, excellent moisture resistance, high compressive strength, and can combine organic and inorganic materials, complement each other's advantages, combine hardness with flexibility, improve the impermeability, improve the compression ratio, and have superior comprehensive performance, so as to achieve a better waterproof effect. It is an ideal new environment-friendly waterproof material that is currently being promoted and applied by the state, It is mainly used for indoor waterproofing of buildings. Warm tips: The right side attachment frame can be consulted online, Especially suitable for use as roof waterproof material and waterproof material of some micro deformation structures Waterproof works such as internal and external walls, kitchens, toilets, non drinking water pools, and retaining walls. What should be paid attention to when doing waterproof treatment, If there is a quality problem in the waterproof project, water stains will sink into the next room, or leak downstairs, causing serious losses to family members and neighbors. So the material is the key. 2. The toilet floor must be leveled with cement mortar before waterproof treatment. This can avoid leakage of waterproof coating due to uneven thickness. 3 The joints should be painted in place. The joints between the toilet wall and the ground, as well as the joints between the water supply and drainage pipes and the ground, are the places most prone to problems. All waterproof coatings must be painted in place during the construction. 4. Wall treatment is also very important. In general toilet waterproof treatment, waterproof coatings about 30 cm high should also be made on the wall, To prevent water from seeping through the wall. However, if the wall of the bathroom is a non load-bearing light wall, the entire wall should be fully coated with waterproof paint. If a two fan shower screen is used, the two connected walls should also be fully coated. If a bathtub is used, the height of the waterproof paint on the wall adjacent to the bathtub should also be higher than the upper edge of the bathtub. 5. Waterproof experiments must be done. After the construction of the bathroom, Block all the sewage in the toilet, build a 25 cm high "sill" at the door, and then fill the toilet with 20 cm high water. After 24 hours, check the surrounding walls and floors for leakage before it is qualified, What are the types of waterproof materials? The price of waterproof materials is 1. The cost of waterproof coiled materials is generally between 20 and 40. For example, the cost of SBS and APP type I modified asphalt waterproof coiled materials is 26~30 yuan/square meter The cost of type II modified asphalt waterproof coiled material is 32~36 yuan/m2. 2. Polyethylene polypropylene fiber waterproof coiled material is mainly classified according to the weight per square meter. The cost of one-time molding polyethylene polypropylene fiber waterproof coiled material that can meet the national standard is generally more than 28 yuan/m2. 3. Acrylic acid Polyammonium waterproof coating Acrylic is a waterproof material that was earlier applied to environmental protection paint and coating, and the cost is about 28~32 yuan/m2. Polyurethane waterproof was the main waterproof material in the waterproof market before, and its waterproof performance was good. Because its solid content, impermeability and other indicators are superior to acrylic acid, its cost is also more than 35 yuan/m2. 4 Polymer cement-based waterproof coating Polymer cement-based waterproof coating has become the leading role in the waterproof coating market. At present, cement mortar is one of the emerging waterproof materials, and the construction cost is about 20~24 yuan/square meter. What are the types of waterproof materials One component polyurethane waterproof coating prepared by addition polymerization of polyether and other prepolymers containing isocyanate group, mixed with various additives. 2. High polymer modified asphalt waterproof coiled material soil High polymer modified asphalt waterproof coiled material soil shall include APP SBS (APAO) is a high polymer modified asphalt waterproof coiled material used as a modified material, which is mainly made of polyester and fiberglass. The modified asphalt waterproof coiled material is a new waterproof material with rapid development in China recently The production and application of JS waterproof coating meet the environmental protection requirements, can be constructed on the wet base surface, and is easy to operate. 4. Mortar and concrete waterproof agents mainly include UBA concrete expansion agent, silicone waterproof agent BR series waterproof agent, cement water-based sealing waterproof agent, etc. When selecting and purchasing, pay attention to the conformity of products from the aspects of homogeneity index and physical and mechanical properties. The price of waterproof materials varies according to different types of waterproof materials. The price of some waterproof materials and the characteristics of different waterproof materials are introduced, This will help you in your choice. Especially in the classification of waterproof materials, you must know more about them, which not only helps to determine the use, but also determines the purchase price. 3. Related concepts 1. Waterproof and waterproof are no longer a new topic, whether it is tunnels, bridges, dams, roads, buildings or houses we live in everyday, Waterproofing should not be ignored. At the same time, the electrical products used in our daily life also have waterproof and moisture-proof problems that must be faced directly. Source: Records of the Historian? Chronicle of the Zhou Dynasty: "Zhao Gong said, 'It's the name of Zhang. It's better to guard against the mouth of the people than against water.'" In Guoyu, it says, "Prevent Sichuan.". 2. The toilet is the collective name of toilet, washroom and bathtub. Toilets in residential buildings are generally divided into dedicated and public toilets. Dedicated only for master bedroom; The public ones are connected with the public walkways and shared by other family members and guests. According to the layout, it can be divided into independent type, dual-use type and compromise type. According to the form, it can be divided into semi open type, open type and closed type. At present, the semi open type that distinguishes dry and wet zones is popular. Which kind of waterproof coating or waterproof coiled material is recommended? Which kind of waterproof material is good for home decoration? Analysis and Comparison of Six Kinds of Commonly Used Toilet Waterproof Coatings Which Waterproof Materials Have Good Performance What Kinds of Waterproof Materials Are Commonly Used in Waterproof Construction of Building Engineering What Kinds of Polymer Waterproof Materials Are There And What Kind of Special Roof Waterproof Materials Are There

The class of Handsfree Decoration School has started. This issue is about how to choose and purchase the main materials of home decoration. Now we will invite Handsfree Decoration Supervisor to tell you about the purchasing skills of interior doors. The supervisor of flip dress reminds you that the front feeling of the door is about face, and visitors always see the door before entering the house. The door is not only the partition of the space, showing the taste and pursuit of the home owner. If used properly, it can complement the overall style of the home decoration. When decorating, will you worry about what kind of door you choose for your family? From the perspective of consumers, Xiaobian explains the selection and purchase of indoor doors for you, so as to prevent consumers from entering the wrong zone. Doors are mainly made of materials. They are generally molded doors, solid wood composite doors (also known as craft composite solid wood doors), and raw wood doors (pure wood). What are solid wood doors? What is a compound door? What is a molded door? Solid wood door: the price is more than 3000 yuan, and there are very few solid wood doors in the general market. Pure wood doors are easy to deform if they are not well made. Korean pine, Chinese fir, oak, etc. are all relatively low-grade wood for doors, and high-grade solid wood includes walnut, cherry, and sabeli. Solid wood composite door: the door is mainly made of solid wood as a skeleton, and the surface is pasted with high-grade wood veneer. The shape is generally very beautiful, and the price is reasonable, which is about 1200-3000 yuan. The main advantages are no deformation and no cracking. Moulded door: The cheap price is about 200 yuan. The construction technology of the molded door is relatively simple, and it looks less thick and beautiful than the solid wood door. This kind of door is mainly used in the balcony, storage room and other places that are not often opened. There is a very important problem with molded doors, that is, the release of harmful gases may cause indoor pollution. Front: look at the finish (shape and paint color); Second, look at the certificate (content of toxic substances); Third, look at the material (solid wood material); Fourth, look at the workmanship (whether the size is regular and fits perfectly). Only by mastering the "four looks", can we not discriminate between the true and false in the maze of doors. TOP 2: When selecting the sound of a solid wood door, you can check the thickness of the door and gently knock on the door surface. If the sound is uniform and dull, it means the door is of good quality. Generally, the higher the proportion of solid wood in a wooden door, the heavier the door will be. If it is a pure solid wood door, the pattern on the surface is very irregular. At a glance, the door surface pattern is smooth, neat and beautiful, which is often not a real solid wood door. TOP 3: As the later process of the factory processing of the wooden door set, the quality of the paint directly affects the later use effect. At the same time, the cost of painting is also one of the larger parts of the cost of wooden doors. The types of paint are roughly divided into phenolic paint, alkyd paint, polyurethane paint, nitrocellulose paint, polyester paint and PU paint. Phenolic paint and alkyd paint are basically eliminated in decoration due to poor film texture and adhesion, and nitrocellulose paint, polyester paint and PU paint used on high-end furniture are widely used. Nitrocellulose paint is widely used due to its simple construction and suitable for manual operation, but its film is thin, the feel is bad, and the effect is not ideal. Due to the problem of cost processing means and equipment, 90% of the wooden door sets on the market currently use polyester paint, and a few manufacturers use PU paint. Generally speaking, polyester paint and PU paint have to go through six processes, including color finding, three bottoms and two sides. Some brands add curing and waxing processes. Therefore, when selecting wooden doors, paint is one of the factors that must be considered. It directly affects the texture, feel, moisture resistance, environmental protection, durability, yellowing resistance and other issues. The interior door is also an important part of the whole home decoration. In the process of decoration, we should also pay attention to its coordination and unity, so as to ensure that the decoration of the home has a more warm feeling. The selection of interior doors is extremely important, and I hope the above content can help you to choose appropriate interior doors. Gorgeous dividing line -------- If you are interested in us, pay attention to us, and we will provide owners with comprehensive and professional decoration knowledge for a long time. Your support is our greater power!!! WeChat official account: Hands off Decoration Supervision Shenzhen Headquarters: 502, Building 3, Xingzhanqi Hotel, No. 1024, Buji Road, Luohu District, Shenzhen Foshan Branch: 7th floor, Building 1, Chuangyue Times Cultural Creative Park, Xianan Road, Guicheng, Nanhai District, Foshan City netizens commented on great wooden door knowledge and recommended it to everyone

There are many materials to be used in decoration. Each material has its own purpose. There are many choices for wall materials alone. Currently, decorative materials such as diatom mud and art paint are very popular. Which is better, art paint or diatom mud? What are the differences between artistic paint and diatom mud? Next, let's learn the difference between artistic paint and diatom mud, and then decide which is better for you to decorate. 1. Which is better, art paint or diatom mud? Decorative effect Art paint pays attention to decorative effect and emphasizes the design atmosphere, while diatom mud pays more attention to the purification effect of harmful substances in the air, which is a functional wall material. From the perspective of color softness, the color paste and toner used in diatom mud painting depends on what kind of pigment it is. Diatom mud is an alkaline substance, and many pigments cannot be used at the same time. Therefore, diatom mud promotes a soft decorative effect of plain colors. In terms of pigments, there is basically no other limit on the selectivity of art paint. Therefore, the color matching is free and colorful, which can better meet the customer's requirements for personalized color effects. 2. Which is better, art paint or diatom mud? Physical performance Art paint has the characteristics of chemical resistance, dust prevention, anti peeling, anti cracking, anti permeability, easy cleaning, etc. The raw material of diatomaceous mud belongs to diatomaceous earth, and its main component is inorganic SiO2. Its chemical properties are relatively stable, and it is difficult to react with the chemical molecules in the air, avoiding problems such as blistering, yellowing and cracking on the wall. High quality diatom mud has good absorption and water resistance, but slightly excessive absorption of water will not exceed 10 minutes, and will become mud. Low quality diatom mud has local water resistance. Although it does not become mud, its absorption will decrease; Most art paints can achieve strong water resistance. 3. Which is better, art paint or diatom mud? Although diatom mud has adsorption function, it is selective in air purification, and if it is damaged after adsorption, it may not be able to absorb those harmful gases, instead, it will cause reverse release after reaching adsorption saturation, causing air pollution in the room again. Art paint itself is not polluted, even if it is damaged, there is no need to worry about secondary air pollution. 4. Which is better, art paint or diatom mud? The service life of diatom mud is pure natural material, and the service life can reach 20 years; Artistic paint is extremely sticky, and can be bent freely on the plastic board. Its service life is about 15 years. 5. Which is better, art paint or diatom mud? Dust prevention is applied to the treatment of dust and stains. The diatom mud is highly absorbent. If it encounters water, it will absorb, and then the diatom mud will become cement. Therefore, if the wall is dirty, it can only be treated pertinently, and never be wiped with wet cloth; Art paint adopts electrostatic treatment, which is waterproof and moisture-proof. It can be directly wiped with a wet rag. It has strong anti fouling ability and scrub resistance. 6. Which is better, art paint or diatom mud? Environmental decontamination art paint is indeed much more environmentally friendly than traditional paint, but the indoor pollution source is far more than just the wall, and art paint can only solve its own problems, but can't do anything about the pollutants emitted by other pollution sources, such as furniture and cloth art. Diatom mud is different. It not only has no pollution, but also can absorb and decompose harmful substances emitted by other pollution sources. In addition, the diatom mud wall also has the functions of sound absorption and noise reduction, fire prevention and flame retardancy, heat preservation and humidity regulation, which are not possessed by art coatings. Which is better, art paint or diatom mud, should first know your own needs for decoration, and then make a choice according to the characteristics. Both art paint and diatom mud are very good wall materials, and which is better, art paint or diatom mud. It is difficult for the editor to give the only answer. The key is the actual situation. Netizen comment: art and happiness are priceless! I like art more than happiness! Personally, I suggest using diatom mud. The whole house in my house uses diatom mud, which can obviously feel warm in winter and cool in summer, and also moisture-proof. Ten major brands of diatom mud

As a new environmental protection decoration material in the new era, Aijue art wall material is welcomed by the public for its environmental protection, safety, beautiful decoration, convenient decoration and simple construction. During the visit and investigation, it was found that many consumers would have difficulties in choosing decorative materials. They were confused about whether to choose integrated wall panels or Aijue art wall materials. The author suggested that consumers should spend three minutes reading this article carefully before making a decision. 1. The product quality integrated wallboard is generally made of wood, PVC resin and adhesive. It is easy to foam, rot, yellowing, mildew and fall off after being affected with damp, which affects the indoor air quality, especially in humid coastal areas. Aijue art wall material is made of natural mineral lime base as raw material, combined with the lime based intelligent ecological particle technology. It is a functional and decorative product, non-toxic, environmentally friendly, and durable as new color; It is also applicable in humid coastal areas. 2. With the rise of consumer groups represented by the post-80s and post-90s generation, the consumption structure is undergoing a thorough change. Personalization, stylization, artistry, and health are influencing the consumption ideas of this special group. The integrated wallboard is convenient for decoration, elegant and beautiful, but the effect is relatively monotonous, no new ideas, and does not meet the consumer needs of the post-80s and post-90s generation with their personality. Aijue art wall material has 16 major functions, including formaldehyde degradation, air purification, respiration and humidity regulation, sterilization and mold prevention, and PM2.5 sedimentation reduction; Various patterns and textures can be customized according to the needs of consumers, with strong artistic effect, which meets the decoration needs of the post-80s and 90s generation. 3. Cleanliness The pace of urban life is fast, the work pressure is high, and heavy housework will only affect the quality of life; Reduce happiness index. However, the integrated wallboard is easy to accumulate ash and scale, difficult to clean, easy to mildew and bacteria, and harmful to human health. Aijue art wall materials are anti-static, waterproof and moisture-proof, dust-free, without too much care, and can easily remove stains by wiping with a rag, without worrying about children scribbling. 4. Transportation difficulty The integrated wallboard is produced, transported and installed in one piece, some of which are up to 6 meters long, increasing the difficulty of handling and transportation. Therefore, special care should be taken during handling to avoid bending the board. Aijue art wall material is barreled, which is convenient and safe to transport. Its products comply with high safety standards from material selection, process production and channel transportation. The finished products are resistant to corrosion, acid and alkali, mold, moisture, fire and flame. By comparison, I believe that consumers have a clear idea of the choice of integrated wallboard and Aijue art wall materials. Aijue art wall materials, based on market demand, are far away from decoration pollution and convey the concept of green and environmentally friendly life; With mature marketing mode, simple operation method and perfect service mechanism, help the national venture investors to create a new investment and franchise platform, and cooperate sincerely to win the future! Netizen comments

1、 How to choose and purchase bathroom cabinet bathroom furniture is a leading role in home decoration and one of the three major pieces of bathroom. How to choose and purchase bathroom cabinet products, how to distinguish between good and bad bathroom cabinet products, and how to buy cost-effective bathroom cabinets, first of all, we must have a comprehensive understanding of bathroom cabinet products from the following aspects. If we choose inferior products, It not only destroys the overall beauty of the bathroom decoration, but also causes corrosion, peeling, loose skin, swelling and other phenomena due to poor product quality. It brings you endless troubles. At present, bathroom cabinet products on the market are divided according to raw materials, generally including glass stainless steel combination, glass electrolytic plate combination, acrylic plate, various types of wood regeneration board (including chipboard, blockboard, MDF, moisture-proof board, etc.) and pure solid wood. Among them, solid wood bathroom furniture, especially oak, is better according to its physical properties, waterproof, damp proof and anti-corrosion effects. Oak is widely used to make grape sprinkling barrels, beer sprinkling barrels, floors, wooden bridges, etc. 1. Particleboard is commonly used for some cheap computer tables, furniture and kitchenware, with low cost. It is processed from the waste during woodworking, and has high water absorption. It can be identified from the opening, interface and edge of the board. When making, manufacturers often paste real paper, wood and plastic skins, wrap the edges with other materials, and then process them with various colors of paint. Bad manufacturers and dealers often use such products as solid wood products based on their false appearance and buyers' ignorance of raw materials. 2. Blockboard is more common in some low price or middle high price wooden furniture. Because it is made of solid wood, it can be divided into different kinds of wood, so the price is different. The compression resistance is very different due to different kinds of wood and different manufacturing processes. For example, if the surface paint is not well done, it will crack in the sun and damp. 3. MDF board is more common in some common computer desks, office furniture and household furniture. It is used for the decoration of indoor exhibition stands and shelves. Waterproof and moisture-proof are not ideal. It is easy to expand and crack, and cannot be used in the wet environment with too much water in the bathroom. However, some poor manufacturers and dealers often use MDF products with wood veneer to cheat consumers by pretending to be solid wood. 4. Although the moisture-proof board has certain moisture-proof performance, and some manufacturers use melamine facing, the board is not an environmental protection building material product because of the addition of a lot of moisture-proof glue in the board. 5. Oak board Oak has unique wood grain, corrosion resistant heartwood, high density, hard texture, and belongs to hardwood category. The household articles made of oak have the advantages of dignified, calm and noble mahogany furniture. However, the price is much lower than that of mahogany. Because of the advantages of oak, this material is widely used to make beer barrels, wine barrels, bathroom barrels, floors, outdoor wooden bridges, etc. It is an ideal material for making bathroom cabinet. Oak can be divided into white oak and red oak according to color. The production in China is extremely scarce, and it is generally imported from the United States, Malaysia and Thailand. 2、 How to identify bathroom furniture products with poor workmanship: the production process is backward, manual operation is unstable, the workmanship is rough, and the size and fit are irregular. In order to save costs, low price paints that do not meet the environmental protection standards are selected in the paint treatment, and the primer is made less, laying hidden dangers for future use. High quality bathroom furniture products: according to the formal furniture production process, the workmanship is fine, and the size and fit are good. Generally, the paint will be painted with two times of bottom sealing oil, and then sprayed with surface oil after the oil polishing process. The paint of the sprayed products has good leveling and smooth surface. Automatic cutting and hole arrangement are adopted to ensure that the process parameters of each set of products are consistent. In terms of technology, it was carved through 34 processes. In terms of paint, imported environment-friendly PU polyester paint is used, and closed double machine painting process is used to effectively isolate moisture. The polyester paint has strong firmness and adhesion, good environmental protection performance, and can solidify benzene in paint. The paint hardness, gloss, fullness and smoothness can reach a perfect unity. The product meets the requirements of QB/T2530-2001 and GB18584-2001 of the People's Republic of China. Netizen comments

Humidity and mildew in home wardrobes are a headache for many people. All kinds of wardrobes will have many problems in the wet season. The following fine material craftsman panel knitting will solve the problem of moisture for all kinds of wardrobes, so that the wardrobes can say goodbye to humidity and mildew! Solid wood wardrobe: it should be considered as one of the wardrobe that is easily affected. Nowadays, many solid wood wardrobes have undergone strict drying procedures before leaving the factory, but this does not mean that moisture-proof is not necessary. To deal with the water drops on the solid wood wardrobe, you can dip a bit of special solid wood cleaner on the dry cloth. This kind of cleaner can form a protective film on the surface of the solid wood wardrobe, to some extent, prevent water vapor infiltration. Solid wood wardrobe tends to swell and mildew after being affected with damp. In this case, it is better to put a piece of soap in the place with musty smell, or put the dried tea residue into a gauze bag to help eliminate the musty smell. Secondly, at ordinary times, you can also apply a thin layer of high-quality gloss wax to the wardrobe, and gently rub it like leather to test the gloss. This will not only maintain the solid wood wardrobe, but also increase its brightness. However, you must be careful when selecting light wax, and you must not use inferior products containing chemical corrosion ingredients. Fabric wardrobe: In the initial stage, discoloration and decoloration will occur due to long-term moisture exposure, and yellow spots or mildew spots may appear on the surface; Furthermore, the elasticity of the fabric after being affected with moisture is lost, the tensile strength is reduced, and the volume of the fabric is increased. After the wet period, the fabric will become brittle, wear resistance will be seriously lost, and easy to wear. Cloth is easy to attach dust, so dust removal should be done at ordinary times to avoid mildew in wet weather. For ordinary cloth sofa, if it is affected with damp, it can be dried with a hair dryer or a dryer, but pay attention to keeping a certain distance between the hair dryer and the cloth surface. It is better to use a special vacuum cleaner to absorb all the dust on the surface of the fabric sofa with fine and complex workmanship. Leather wardrobe: leather wardrobe is in a humid environment for a long time, and the surface color of leather products after chemical treatment is easy to change, and the leather becomes hard; When the humidity exceeds 90%, mold spots will appear. Before the arrival of hot and humid weather, first use a soft wet cloth to remove dust, and then rub a layer of mink oil, sheep oil, leather oil and other special protective oils for leather wardrobe on the surface, which can not only play a moisture-proof role, but also protect the color of leather wardrobe. If mold spots appear on the surface of the leather wardrobe, it is necessary to remove the mold spots with mildew remover, and then apply leather maintenance oil. Rattan wardrobe: It will become black after being affected with damp for a long time, and will rot seriously, and its toughness and firmness will also be significantly reduced. If there is scale in use, it is better to scrub it with salt water, which can not only decontaminate, but also make the rattan soft and elastic, and ensure its water absorption. In case of moisture, it shall not be heavily pressed to ensure that the braided shape and its gap will not be deformed, and it will shrink to the original after drying. Iron wardrobe: it will rust due to the increase of moisture, leading to decay. This kind of wardrobe is better wiped with a dry rag in wet days to absorb excess water. If there is rust on the surface of the iron wardrobe, you can use a dishcloth or toothbrush dipped with anti rust agent to remove it, and then use a dry cloth to polish it. Netizen comments

In recent years, a new kind of wall material for wall decoration, diatom mud, has appeared in the major building materials markets like a burning star. Its various keywords, such as "decomposition of formaldehyde", "life span up to 30 years" and "humidity regulation", have been widely sought after by decoration owners, and more and more wedding houses are decorated with diatom mud, And we are also pleased to take you with the decoration master to understand the rising diatom mud industry in the troubled paint world, where is the magic?! In fact, I have always known a little about diatom mud. Previously, I only heard about the magic of diatom mud, but I didn't know what the magic was. Today, I learned from the decoration master, which really opened a new world of wall decoration for my little brother. The following is the dialogue between my brother and the decoration master, and the answers of the decoration master are sorted out. PART: Four reasons for choosing diatom mud!!! Q: Master Qin, I have a problem. They are also decorative materials. Diatom mud is more expensive than wall paint. Why should I choose diatom mud? Master Qin: Many people like diatom mud because it has many characteristics that other wall materials do not have. Let me introduce some characteristics of diatom mud to you first. The front and more personalized wall patterns can be DIY independently, like some TV walls or children's rooms. The decoration is mainly creative, and simple paint can no longer meet the needs of many owners. The advent of diatom mud has just brought a fresh upsurge of decoration, and the production patterns of diatom mud can be DIY at will. Second, diatom mud has a big front feature - environmental protection 1. It not only decomposes formaldehyde, but also decomposes formaldehyde! As we all know, formaldehyde pollution is a major problem during decoration. The decoration is not only beautiful, but also healthy. However, many decoration materials now have high formaldehyde indicators. Sometimes, in order to disperse formaldehyde, the newly decorated house will take a long time to move in. The diatomaceous mud not only does not contain formaldehyde, but also helps to decompose indoor formaldehyde! Generally, after the house is decorated, it will take about 3-4 months to move in, while the diatom mud decoration will take about one month to move in! 2. Don't be afraid of the bad air at home! ① Deodorization: For example, the smell of pets, cats and dogs, the fishy smell of goldfish, the smell of smoke, etc., these diatom mud can be purified. ② Cleanliness: In addition, diatom mud makes use of its own porosity during breathing, which can absorb oil molecules for decomposition and release harmless substances. ③ Clean: not only that, diatom mud does not stand dust! 3. It can not only adjust humidity but also keep warm! Diatomaceous mud is a magic thing, its humidity regulating function is 4-6 times that of bamboo charcoal! When the room is wet, it can absorb moisture and store water molecules. When the room is dry, it can release water molecules to regulate humidity! The microporous structure of diatomaceous mud leads to its low heat conductivity, and its thermal insulation performance is more than 6 times higher than that of cement and mortar, which greatly saves electric energy and heating costs. Third, the noise reduction and sound insulation effect is very good. Good sleep every day is not a problem! Now the society is developing too fast, the buildings are being built higher and higher, and there are a lot of traffic outside, and the lights are bright. If it is very late, it will be very noisy, affecting sleep, especially for children. The countless pores of diatomaceous mud can not only absorb and reduce noise, its effect is more than twice that of cement mortar and stone slab of the same thickness, and can reduce the residual noise by 50%, It greatly reduces the spread of noise and can help you create a quiet indoor environment. In the same way, the family's video room should be soundproof, and diatom mud is a must! Fourth, crack resistance! Life span up to 30 years!! One time investment! Although the price of ordinary wallpaper and wall paint is cheap, its service life is only about 3-5 years. There are edge warping, peeling, yellowing, aging, mildew and other phenomena. It should be done at least 4 times in 20 years. It is not only laborious, time-consuming and expensive, but also increases pollution. The life of diatom mud can reach 30 years! Not only that, but also not edge warping and falling off. In addition, the fading rate of diatom mud is very slow. Almost ten years later, it is still as new. Do you still think diatom mud is expensive? Not only that, the crack resistance of diatom mud is very good! For example, a 100 square meter house needs about 5000 yuan for latex paint, 10000 yuan for wallpaper, and 30000 yuan for diatom mud. But diatom mud is a one-time investment with lifelong benefits. Latex paint and wallpaper are long-term investments. It can be seen that diatom mud is the indoor wall material without exceeding the value. Ps: Actually, the price mentioned by Master Qin is not the same in every region. The price is only for reference