In January 2012, Tangshan Desheng Waterproof Material Co., Ltd. Product R&D Department's style display video

What are the misunderstandings of ceramic tile adhesive?

What are the misunderstandings of ceramic tile adhesive? Tile pasting is a meticulous job, and the tile glue paving technique is also related to whether the tiles will be empty and fall off in the later period. Many friends will have various problems in the process of using the tile glue. What are the mistakes in using the tile glue? Misuse of ceramic tile glue 1. The ceramic tile glue mixed with cement, sand and other ceramic tile glue is already a well proportioned product, and there is no need to add other things. If added, the product proportioning will be damaged, and the quality cannot be guaranteed, and tile tiling is prone to hollowing, falling off and other problems. 2. Putting the tile glue on the ground and stirring it with a shovel will lead to the loss of effective chemical components of the tile glue; Secondly, it is impossible to mix evenly with a spade, and the proportion of water added by manual mixing is difficult to be accurate. The material ratio has changed, leading to the reduction of the adhesive force of the tile adhesive. 3. For a long time, it is incorrect to put the tile glue in the bucket and soak it with water. Some construction masters are accustomed to using the method of soaking cement. For a long time, the mixed tile glue is placed on the ground or in a bucket for soaking, which will easily lead to the lack of bonding strength of the tile glue, resulting in subsequent powder and brick loss. 4. If it has been used for a long time, some masters will mix the tile glue left last night with water and then add water and tile glue powder in the morning to mix. In fact, the effective components of the tile adhesive have chemical reaction due to the long time of placement. Adding water will only change its operating performance, resulting in insufficient bond strength in the later period; Tile glue shall be used as soon as it is stirred, the use time shall be controlled within 2 hours, and it shall be discarded after drying. 5. If the base course is not properly treated, the wall surface is not solid, the base course has defects such as oil stain and release agent, and the base course is not leveled, then tiles are paved. The low strength of the base course, uneven wall surface and greasy dirt will directly affect the adhesive force of the tile glue, leading to hollowing and brick dropping; The unqualified base course shall be treated before tiling. 6. The one-time glue coating area is too large, the surface of the glue is dry and solid, outdoor dry, windy weather, and the area of glue spreading and scraping is too large, and the construction time is too late, which will cause the surface to dry and solid before tiling, which will lead to brick falling; Use tooth scraper to scrape the glue evenly on the working surface. When tiling, the area of tile adhesive tape should be controlled within 1 square meter. In dry weather, the wall should be wetted in advance. 7. Uneven painting and incomplete kneading of ceramic tiles will cause a series of problems: (1) The corners of ceramic tiles are empty, which will lead to brick falling in a long-term humid environment; (2) The tile adhesive is uneven, and the tile adhesive is not firmly and completely bonded; (3) The tiles are not rubbed and pressed, and the glue is not firmly bonded.

Can ceramic tile glue be mixed with cement

Can ceramic tile glue be mixed with cement? All kinds of materials are also being updated step by step, and ceramic tile adhesive is one of them. In the past, most of our bricks were made of cement mortar, but now the technology is developed, and cement mortar has gradually been replaced by ceramic tile adhesive with better performance. Can ceramic tile glue be mixed with cement? Can ceramic tile glue be mixed with cement? Ceramic tile glue cannot be mixed with cement. Some ceramic tile glue will be mixed on the construction site, mainly to save money or cut corners. It can also speed up the drying time and make ceramic tile glue delicate. However, this will affect the performance of ceramic tile glue, leading to decreased adhesion, rotation and hollowing. Tile glue has many advantages, saving space, as long as a thin layer is enough, and the tiles are also very firm, reducing the use of waste materials, meeting environmental requirements, etc. 1. The water storage property of ceramic tile glue is very good, and cement can't compare with it. Ceramic tile glue can better delay the loss of water, so as to achieve more results. 2. Changing the ratio of raw materials of the product at will will inevitably lead to product failure. From the composition of the tile adhesive, we can see that its own composition is sand, which is adjusted according to a certain proportion. The formula of the tile adhesive is the core competitiveness of the product obtained through the constant experiment and practice of the tile adhesive brand manufacturers. We still have to follow the product instructions. 3. Although the price of cement is much lower than that of ceramic tile adhesive, a small amount of ceramic tile adhesive can achieve several times the super adhesive force of cement, which still reduces the amount of materials used. In addition, consider the safety of tiling and the expense of avoiding rework in the future. The ceramic tile adhesive contains a variety of additives, specifically the functionality of the ceramic tile adhesive. Generally, cellulose ether is added to ceramic tile adhesive to provide water retention and thickening, and latex powder is provided to increase the adhesive strength of ceramic tile adhesive. The most common latex powder is vinyl acetate/vinyl ester copolymer, vinyl laurate/vinyl chloride copolymer, acrylic acid and other additives. The addition of latex powder can greatly increase the flexibility of ceramic tile adhesive and improve the role of stress, Increase flexibility. Other ceramic tile adhesives with special functional requirements are added with other additives, such as adding wood fiber to improve the crack resistance and opening time of mortar, adding modified starch ether to provide slip resistance of mortar, adding early strength agent to make ceramic tile adhesive faster improve strength, adding hydrophobic agent to reduce water absorption to provide waterproof effect, etc.

What are the mistakes in the use of waterproof coating?

What are the mistakes in the use of waterproof coating? Waterproof coating is an essential material in home decoration, but many friends may buy inferior products because of their inexperience, which has a great impact on people's lives. But it may also cause many problems due to its improper operation. What are the mistakes in the use of waterproof coating? Mistakes in the use of waterproof coating 1. Although instructions for use are attached to the package of waterproof coating when the coating is purchased unevenly, in the actual construction process, the construction personnel perfunctorily stirred or directly mixed it manually with several sticks, which greatly reduced the performance of the cured film because of the performance of waterproof coating and liquid The mixing uniformity of the powder has a great relationship. 2. The package description of the product with too much water will suggest that the paint can be diluted by adding more water than the specified amount of water during the first coating construction, which is conducive to improving the permeability of the paint to the base course and improving the adhesion to the base course. However, due to lack of professional knowledge, many construction personnel will add water at will when using, which is counterproductive and will seriously damage the formula proportion of waterproof coating and affect its film performance. 3. The construction of waterproof coating for over dry or over wet base course requires high temperature and humidity. The suitable temperature is 5 ℃~35 ℃, and the humidity is 50%~70%. It does not mean that construction can be carried out under any humid climatic environment or very high moisture content of the base course. Too high moisture content of the base course and too humid climatic conditions are detrimental to the curing and film forming of polymer emulsion, and will reduce the elongation of the film. At the same time, the cement in the waterproof coating is solidified by water. Too dry base course and climatic conditions are unfavorable to cement solidification, so during construction in hot and dry seasons, the base course shall be sprayed with a little water before construction.

What are the differences between water-based paint and oil-based paint?

Waterborne paint VS oil-based paint? The comparison between water-based coatings and oil-based coatings should be based on the products of the same grade. Many people are not particularly clear about water-based coatings and oil-based coatings. What are the differences between water-based coatings and oil-based coatings? Waterborne coatings VS oil-based coatings Waterborne coatings have three types: one is water-based wood coatings with acrylic acid as the main component; The second is the composition of acrylic acid and polyurethane; Third, 100% polyurethane waterborne coatings, whose abrasion resistance is even several times that of oil-based coatings, are the advanced products in waterborne coatings. 1： Environmental protection From the perspective of environmental protection, water-based coatings have natural advantages over oil-based coatings (solvent based wood coatings). Theoretically, the lower the VOC content, the higher the environmental protection. However, the lower the VOC content has an impact on the abrasion resistance, hardness and scratch resistance of the oily coating. The above indicators have always been the technical problems of water-based coatings that need to be overcome. How to achieve both environmental protection and high quality is the focus of technical research of major coating manufacturers. 2： The technical requirements of cost-effective waterborne coatings on drying time, hardness, fullness and other properties are relatively high, the manufacturing process is relatively complex, and large-scale production equipment is required to produce products with relatively stable performance, and the production cost is relatively high. This is also the reason why the price of water-based coatings of the same grade is much higher than that of oil-based coatings. 3： Abrasion resistant water-based wood coatings are far inferior to oil-based wood coatings in terms of hardness, fullness, aging resistance and other decorative effects. Consumers with high requirements for home environment may even redecorate after three to five years. Because the abrasion resistance of general water-based coatings is not high, most consumers choose to use water-based coatings only on the wall, and oil-based coatings are used for parts that are often scrubbed, such as doors, windows and furniture. No matter it is water-based paint or oil-based paint, it should not rely too much on a certain kind of paint for home decoration. It should be a combination of the two to achieve the best painting effect. Therefore, we must specifically understand the difference between water-based paint and oil-based paint before painting.

How to choose waterproof materials?

How to choose waterproof materials? In the process of waterproofing, the selection of waterproof coating plays a vital role. However, many users are not very familiar with waterproof coating. How to choose waterproof materials? How to choose waterproof materials? 1. When purchasing waterproof materials, it is necessary to distinguish between flexibility and rigidity. Many people do not know the difference between rigidity and flexibility when purchasing waterproof coatings, so it is difficult to buy suitable waterproof coatings, which will affect the final waterproof effect. The flexible waterproof material is formed by chemical reaction to isolate the building structure from the environmental water, so as to achieve the purpose of waterproof. Rigid waterproof materials can improve the impermeability of the base by improving the compactness of the concrete base and reducing the void ratio. There is no good or bad distinction between flexible waterproof materials and rigid waterproof materials. The choice of flexible or rigid waterproof materials is determined by different decoration environments. The extensibility of flexible waterproof materials is suitable for slight structural deformation and is more suitable for the decoration of new and old buildings. The rigid waterproof material has a slightly poor adaptability to deformation, but its hardness and strength are relatively good, so it is generally used for moisture-proof. 2. Different waterproof materials are selected according to different waterproof parts. Different spaces have different performance requirements for waterproof paint. Therefore, when selecting waterproof paint, in addition to distinguishing flexible and rigid waterproof materials, waterproof paint should also be used according to different parts. Only when the right place is used, can the best waterproof effect be achieved. 3. Different waterproof coatings shall be selected according to the geographical location. The geographical location will also have higher requirements for waterproof coatings. It is rainy in the south and snowy in the north. In contrast to the south, the roof is always wet when it rains continuously, and the drainage is not smooth or even there will be ponding. It will not dry for several months, and the waterproof layer will be soaked. However, in severe cold and snowy areas, some waterproof materials cannot withstand the cycle change of low-temperature frost heave and contraction, and will be aged and broken in a short time. Therefore, different waterproof materials should be selected for different geographical locations. 4. When choosing waterproof paint with environmental protection certification, some families often mistakenly think that the area of waterproof works for bathroom, kitchen and other indoor decoration is not large, and they will continue to use cement and ceramic tiles on it after using waterproof paint, so no waterproof material will cause pollution. In fact, it is because of the concealment of the waterproof layer that poor quality waterproof paint will pollute the indoor environment for a long time once used. Therefore, when selecting waterproof coating, it is more important to select those that have passed the environmental protection certification standards (such as the ten ring certification, EC1 certification, etc.). Regular brand waterproof coatings will have corresponding product test reports. By viewing the product test reports, you can know the composition and quality of the products at a glance, so as to avoid purchasing inferior products.

Construction of sponge city must start from waterproof materials

Today's modern cities are no longer cement forests, but connect cities with nature and build green ecological cities. The sponge city is the product of the new era. As people expect, open and flat roads, neat and beautiful green belts, clean water and green wetland landscape, cool air full of vitality, beautiful ecological environment, harmonious blend of human and nature, the city exudes a different kind of charming charm - this is the life scene under the "sponge city". So, what is a "sponge city"? As the name implies, a sponge city means that a city can absorb, store, infiltrate and purify water like a sponge when it rains, and release and use the stored water when necessary, so as to realize the free migration of rainwater in the city. Since China launched the "sponge city" pilot project in 2015, the first batch of pilot projects have achieved certain results. However, there are still some unsatisfactory places that make people sigh. What is the problem? As a high-quality sponge city supplier, Shanghai Huwang Technology has told us that the key to building a green sponge city is not how many green belts are built on the road, but exactly where we can't see them. The so-called "If you want to do a good job, you must first sharpen your tools". To build a real sponge city, you must start with the most basic waterproof materials. In short, it is necessary to have a good waterproof board. In the practice of engineering projects, the advantages of polymer protection and drainage profiled sheet of Huwang Technology are also very obvious. The concave convex hollow vertical bar structure on the waterproof and drainage board can quickly and effectively export rainwater, greatly reduce or even eliminate the hydrostatic pressure of the waterproof layer, and finally achieve the effect of active waterproof. At the same time, polyethylene, as the main material, has a good waterproof property. Through reliable connection, Huwang Technology maximizes its role. According to the laboratory data, the waterproof and drainage board made of this material can effectively reduce the indoor noise, and can also play a very good role in ventilation and moisture-proof. More importantly, waterproof and drainage boards can effectively protect structures and waterproof layers, and resist various acids and alkalis in the soil and root thorns of plants. Only with excellent products and technologies can we truly solve the problem of difficult drainage for the city and build a green sponge city.

Simple roof insulation method Long term effective waterproof and thermal insulation method for roof

With the improvement of living standards, people have more and more strict requirements for home decoration. Home decoration is a big event for us. The main thing is to choose good materials. Roof insulation is one of the common ways of home decoration. So today, I will tell you about simple roof insulation methods to add beauty to your new house! Only when the decoration is good can we live comfortably. 1、 What can we do to make the roof insulated? 1. Green environmental protection method: put more bonsais on the roof. If you are busy, you don't need to take care of more. If the roof on the top can bear the load, the insulation is to make a sky garden -- that is, find some soil on the roof and plant plants. 2. Wooden box type insulation can be done by yourself. The size of the wooden box depends on your house, and it is filled with foam insulation boards! Pay attention to fireproof treatment on wooden cases! 3. Suspended ceiling insulation (indoor): but it reduces the indoor space. Paint keel mineral wool board or insert board ceiling can effectively insulate heat. Either add a layer of insulation board on the wall of the living room or paint a layer of insulation layer around the living room. 2. There are many long-term effective waterproof and thermal insulation methods for the roof. The price varies according to different materials: 1 The air circulation heat insulation method is to cover a hollow interlayer about 30cm on the roof. When the sun is exposed in summer, the flowing air below can effectively isolate the heat transfer effect, This roof insulation method can effectively and reasonably reduce the indoor temperature and is relatively simple. 3. The white glossy paper reflection method, as its name implies, is to lay a layer of smooth white glossy paper on the roof, which is made of tin foil, not easy to be stained with oil, and can strongly reflect and insulate. 4. Pearl sand insulation layer Now there are many roof insulation methods, and a 10 cm thick pearl sand insulation layer can be laid on the roof, Then a layer of cement prefabricated insulation board can be made; If it is a reinforced concrete cast-in-place roof, a 20 cm thick soil layer can be stored on it for greening and planting flowers and plants, which not only beautifies the bad environment, but also has the function of heat insulation. 5. The invention discloses a roof leak proof and heat insulation method, which is to cover the whole roof with glass steel plate and bond the glass steel plate as a whole. Compared with the prior art, It has the advantages of easy construction, high material strength, light weight, long service life, good leak proof and heat insulation effect, etc. 6. Ceramsite concrete heat insulation, such as the method of laying ceramsite concrete heat insulation on the top floor, can greatly reduce the indoor temperature, not only can have a comfortable summer, but also can effectively save power consumption and reduce the cost of electricity. In addition to the ceramsite concrete as the roof insulation layer, With the effective heat insulation, it has also played a very good moisture-proof and waterproof effect. Now ceramsite concrete has been widely used as toilet backfill and roof insulation layer. Relevant recommendations How to make waterproof and thermal insulation of old building roof simple and easy? How to deal with the roof and ground? How to do the roof insulation layer? How to make it both affordable and practical? The roof insulation layer is a better way to make the roof insulation layer. In summer, the roof insulation coating is better. Is the roof sunscreen useful? Is the roof waterproof, heat insulation and cooling treatment done once again. Roof insulation coating construction precautions. Roof insulation and sitting cool

What to use for home decoration wall? What waterproof materials to use for home decoration wall

When purchasing decoration products, many people attach great importance to brands. Excellent brands not only guarantee the quality, but also show the taste of the decoration effect, so that others can see the uniqueness of home decoration. There are many brands of decoration products, which are inherited and developed in the market with their own characteristics. How should you choose? What is good for home decoration wall? 1、 There are many good wall decoration materials for home decoration, such as latex paint, wallpaper, diatom mud, ceramic tile, etc. At present, the number of people who use latex paint should be the largest. Latex paint has the following advantages: 1. Environmental friendly latex paint uses water as the dispersion medium, does not contain organic solvents or only a small amount of organic solvents, so during production and construction, There is no or almost no organic solvent volatilization, which will cause environmental pollution and harm to human body. During transportation and storage, there is no danger of explosion and fire. It belongs to the category of water-based paint, and is a kind of resource saving, safe and environmentally friendly paint. 2. Convenient construction. Latex paint can be brushed, roller coated, sprayed It can be diluted with water. Brushing tools can be easily cleaned immediately with water. When not in use for a short time, the brushing tools can also be immersed in water or sealed with plastic bags Good air permeability latex paint is formed by evaporation of water and deformation and fusion of latex particles, so it has good air permeability, Only people can use it. The same is true for latex paint, which can play a role in both decoration and protection in the field it is involved in and used. Second, what kind of waterproof material is used for the wall of home decoration? In the waterproof of home decoration, we generally need to make kitchens, bathrooms, and balconies, including if your home is on the ground floor, Then all floors and walls below 1.5m away from the wall need to be treated with waterproof and moisture-proof treatment. Different waterproof materials are suitable for different parts of the wall. The waterproof materials on the wall are the same as those on the ground, so you only need to know the waterproof materials suitable for each part of the home decoration. It is recommended to use kitchen and bathroom waterproof mortar in kitchens, bathrooms and basements, It is specially developed for the internal and external corners, pipes, sanitary wares, floor drains and other surrounding areas that are prone to water seepage in kitchen and bathroom. Therefore, it is specially made, more targeted, and the waterproof effect is certainly better. For balcony, roof, terrace, etc., it is suggested that K11 waterproof mortar flexible type and mortar waterproof agent should be combined for construction, so that the combination of hardness and softness can resist the erosion of sun and rain, Ensure good waterproof effect. 3. Related concepts 1. Emulsion paint, also known as synthetic resin emulsion paint, is a kind of organic paint. It is a kind of water-based paint prepared with synthetic resin emulsion as the base material, pigments, fillers and various additives. According to different production materials, latex paints mainly include polyvinyl acetate latex paint, ethylene propylene latex paint, pure acrylic latex paint, styrene acrylic latex paint, etc. According to the different application environments of the product, it can be divided into interior wall latex paint and exterior wall latex paint. According to the gloss effect of decoration, it can be divided into matte, matt, semi gloss, mercerized and glossy types. Latex paint has many advantages different from traditional wall coatings, such as easy brushing, rapid drying, etc. The methods to identify latex paint include looking, smelling, wiping, brushing, pulling and testing. 2. Paint coating is a kind of viscous liquid that is coated on the surface of protected or decorated objects and can form a continuous film firmly attached to the coated objects. It is usually made of resin, oil, or emulsion, with or without pigments, fillers, and corresponding additives, and is prepared with organic solvent or water. The more authoritative book "Coating Technology" in the Chinese coating industry defines as: "Coating is a kind of material, which can be coated on the surface of objects with different construction processes to form a solid film with firm adhesion, certain strength and continuity. The film formed by this is commonly called coating film, also known as paint film or coating." In the early days, most of the coatings used vegetable oil as the main raw material, So it is called "paint". Both traditional coating products with natural materials as raw materials and modern developing coating products with synthetic chemical products as raw materials belong to organic chemical polymer materials, and the film formed belongs to the type of polymer compounds. According to the classification of modern chemical products, coatings belong to fine chemical products. Relevant recommendations: Xinxing wall decoration materials, wall waterproofing practices, waterproof construction, attention points, wall leakage materials, whether the wall can be nano waterproof, why the family waterproof wall uses rigid coating, what brand of waterproof materials for new house decoration, what brand of waterproof materials for new house decoration, good indoor waterproof coating, whether the wall is necessary to be waterproof, which kind of waterproof glue for exterior wall, which kind of good decoration must be known 9 major waterproof problems of road

Waterproof and leak sealant for toilet

In fact, there are priorities when decorating. No matter what social class you are, you should spend your money where you should be, so that there will be no potential safety hazards at home. Moreover, the decoration is like a bottomless hole. Fifty or sixty thousand yuan can be used to decorate a suite, and fifty or sixty thousand yuan can also be used to decorate a suite. So it is correct to choose the materials that are suitable for you. Today, I will tell you about the waterproof leak sealer in the toilet. How much do you know about the waterproof leak sealer in the toilet? Why don't you take a look with me. 1、 The traditional concept of waterproof leak sealant is to make up where the leak is. The latest method of waterproof leak repair is to abandon this traditional concept. If the waterproof layer leaks, do a good job of waterproof and leak proof outside the tiles. As long as the surface of the tiles outside is waterproof, the waterproof effect is the same. Waterproof construction method: use a knife to remove waterproof cement or glue between tiles, use a dryer to dry the floor for a day, and then fill the gully with cement of the same color as the floor (if the floor is white, use white cement to fill it; if the floor is black, use black cement to fill it, for the sake of indoor beauty) Then slowly inject a special CPC waterproof agent into the cement. After 1-2 days, the waterproof agent and cement will be firmly adsorbed on the tile, effectively forming a stable waterproof layer. 2、 What are the waterproof and leak stopping techniques in the toilet? 1. The wall must be waterproof. Before the wall tiles are paved, the wall must be waterproof. In general waterproof treatment, the wall must be waterproof with a height of 30 cm, and the non load-bearing light wall must be at least 60 cm high. It is better to waterproof the whole wall. 2. The joints between the wall and the ground and the joints between the water supply and drainage pipes and the ground are the places most prone to problems. Workers must be urged to handle these corners. Waterproof and leak stopping coatings must be applied in place, and it is best to strengthen the layer. 3. If it is necessary to replace the original floor tile in the bathroom, the original floor tile must be leveled with cement mortar first, and then the waterproof plugging treatment must be carried out, so as to avoid leakage of waterproof coating due to uneven thickness. Before waterproof, the floor must be cleaned. 4. Try not to damage the original waterproof layer. A waterproof layer has been made on the general ground of the newly delivered building, so no leakage will occur if the original waterproof layer is not damaged. 5. The decoration team is required to make cement mulch for all the water pipes in the toilet, brush waterproof paint from the ground up by 10 to 20 cm, and then redo ester waterproof on the ground, and add the original waterproof layer to form a composite waterproof layer to enhance the waterproof. 6. The groove of the water pipe in the wall shall also be waterproof. During the construction process, when the pipe, floor drain, etc. pass through the floor, the waterproof layer around the hole must be carefully constructed. The water pipe shall be buried in the wall, and the reasonable layout shall be achieved. When laying the water pipe, the groove shall be made larger than the pipe diameter. The groove shall be plastered smoothly, and then the groove shall be painted with waterproof paint. 7. The 24-hour "water storage test" is used to check and accept the waterproofing. After the waterproofing works are completed, the door and the water outlet are sealed. The toilet floor is filled with water to a certain level and marked. If there is no obvious drop in the level within 24 hours, especially if there is no leakage on the roof of the house downstairs, the waterproofing and leakage blocking are qualified. 3、 Relevant concept 1, plugging is a construction measure! It is mainly used in waterproof containers or measures commonly used when the foundation leaks. 2. Waterproofing is no longer a new topic, whether it is tunnels, bridges, dams, roads, buildings or our daily living houses, waterproof can not be ignored. At the same time, the electrical products used in our daily life also have waterproof and moisture-proof problems that must be faced directly. Source: Records of the Historian? Chronicle of the Zhou Dynasty: "Zhao Gong said, 'It's the name of Zhang. It's better to guard against the mouth of the people than against water.'" In Guoyu, it says, "Prevent Sichuan.".

Is it reliable not to knock ceramic tiles for waterproofing? How much is it to knock ceramic tiles for waterproofing

During the decoration, our decoration budget is always overspent, which seems to be an ordinary thing in the decoration, but when you think about it, the overspent money is not worth it at all. So we must shop around when choosing decoration products. Because it is troublesome to do waterproof in the toilet, many people want to do waterproof without knocking tiles when doing waterproof in the toilet. Is it reliable to do waterproof without knocking tiles? Let's have a look. 1、 Of course, it is safe to use waterproof agent without knocking ceramic tiles. Use waterproof agent without smashing bricks in kitchen and bathroom. This is specifically aimed at water leakage after laying ceramic tiles. As long as the pipeline is not broken, the waterproof agent without smashing bricks can be treated, which saves time and labor, and is economical. Waterproofing can only be done from the ground. If it is leaking from the ground, you can use glass glue to hook all the brick joints. But you can't stay long, After several years, no matter what you use for pointing, you can't stay for several years. It's the best way to knock on the tiles. How to use the waterproof agent without smashing bricks in kitchen and bathroom: 1. Use a screwdriver or wallpaper knife to remove and clean the loose oil sludge and other dirt in the floor tile joints. 2. Use a plastic bag to wrap the rag to block the floor leak, Infiltrate the kitchen and bathroom non brick smashing waterproof agent into component A, dilute it with 3 times of clear water, pour it on the floor tile, and sweep it from the low to the high with a broom for 3 hours to make the waterproof agent leak evenly into the floor tile seam (if the waterproof agent leaks in less than 3 hours, immediately proceed to the next process). 3. Release the residual waterproof agent permeable component A from the floor drain, and clean the floor at least three times with a mop to ensure that it is fully clean, Re plug the floor drain; Dilute the crystalline component B of waterproof agent with 3 times of clear water and pour it on the floor tile. Sweep the floor tile with a broom from the low to the high for 3 hours to make the waterproof agent leak into the floor tile seam evenly and fully (if the leakage is completed within 3 hours, the next process shall be carried out immediately). 2、 How much does it cost to do waterproof without knocking tiles? Whether it is necessary to do waterproof depends on the cause of water leakage, Only in this way can we solve the problem fundamentally. The amount of money for waterproofing should be considered from two perspectives, one is the material problem, and the other is the construction problem. Waterproof material. It depends on several materials, whether they are non-standard materials or national standard materials. It's cheaper than 10 yuan. Qualified, a course of material costs about 40 yuan. Take the traditional SBS modified asphalt roll as an example, from more than 100 yuan per roll to 600 yuan per roll, and the construction team's labor and material contracting price ranges from more than 20 yuan per square meter to 5 yuan, 60 yuan or even 70 yuan per square meter. The cost of materials accounts for 60~65%. Generally speaking, about 20 yuan and 30 yuan are non-standard products, that is, unqualified products. 3、 Related concept 1. Toilet and toilet are the collective name of toilet, toilet and bathtub. Toilets in residential buildings are generally divided into dedicated and public toilets. Dedicated only for master bedroom; The public ones are connected with the public walkways and shared by other family members and guests. According to the layout, it can be divided into independent type, dual-use type and compromise type. According to the form, it can be divided into semi open type, open type and closed type. At present, the semi open type that distinguishes dry and wet zones is popular. 2. Waterproofing is no longer a new topic, whether it is tunnels, bridges, dams, roads, buildings or our daily living houses, waterproof can not be ignored. At the same time, the electrical products used in our daily life also have waterproof and moisture-proof problems that must be faced directly. Source: Records of the Historian? Chronicle of the Zhou Dynasty: "Zhao Gong said, 'It's the name of Zhang. It's better to guard against the mouth of the people than against water.'" In Guoyu, it says, "Prevent Sichuan.". 3. Leakage repair refers to the repair of leakage of building facilities. Relevant recommendations: Tips for preventing leakage in toilet decoration Waterproof and leak stopping in hotel bathrooms Do not knock ceramic tiles, do not break ceramic tiles, do not leak in bathrooms Waterproof agent in bathrooms is better than that of better brands. Do you want to do waterproof and leak stopping when pasting ceramic tiles on the walls of bathrooms? Tell you whether the beautiful seam treatment of ceramic tiles after waterproof and leak stopping in bathrooms must do waterproof on the walls of bathrooms? Will the waterproof tiles on the walls of the toilet and kitchen affect the firmness of the tiles? Does the waterproof layer of the toilet wall affect the tiling? Key points of waterproof construction techniques for household toilet

Desheng 2017 face recognition new product CS3, high-end new concept leads the industry trend - waterproof material Desheng

Desheng face recognition 3.0 will be launched soon, and Tencent Technology, Sohu News and other media will report synchronously! And after Desheng Technology launched the second generation of face recognition products in 2016, the third generation of face recognition products will also be launched soon! On February 22-24, 2017, Desheng Technology will hold the "2017 Desheng New Product Release and Agent Seminar"! "Real Name Easy" TSR-CS3 Naming Meaning: "C" represents the client product; "S" stands for Strengthened, Speed and Security. It has powerful performance and complete functions, and is an enhanced version of "Real Name Easy"; "3" represents the 3rd generation face recognition product. High end lightweight all-in-one flexible body meets the requirements of multi scene applications. This TSR-CS3, an all-in-one Desheng ID card recognition machine, has a full metal body design, which is not only beautiful in appearance but also flexible in application. It can meet the requirements of desktop, wall hanging and other multi scene transformation applications. It is lightweight, high-end, grand and avant-garde, and white when used perfectly explains a good sense of technology. The humanized design is more practical and the functions are more accurate. This new product has made some new breakthroughs compared with the previous two generations of face recognition terminal products on the basis of the improvement of the basic functions of the previous Desheng "Real Name Easy" series products. We call it the "Face Recognition 3.0" version. Wider angle shooting and more intelligent fill light accelerate the speed of face comparison (<1s), enable rapid verification of the consistency between people and ID cards, and make humanized functions more accurate and practical. With strong expansibility, Desheng ID card recognition all-in-one machine TSR-CS3, which is at the front end of the industry, not only has the function of verifying the consistency between the person and the ID card, but also has a series of expansion functions, such as monitoring function, access control function and alarm function, to carry out artificial intelligence to the end. (Picture of "CS3 Access Control Road Gate Linkage" of Desheng Human ID all-in-one machine) Desheng "Real Name Easy TSR-CS3" can be specially used in a series of scenes that require the consistency of the checker and ID card, such as factories, notary offices, government agencies, enterprises, schools, examination halls, hotels, Internet cafes, etc. For more tsr-cs3 new product inquiries, please follow the official website of Desheng. Tencent Technology, Sohu News and other media have also synchronized a large number of reports, and interested customers can follow the latest technology information in real time. Netizen comments

label: Desheng face recognition CS3 Face recognition tecsun CS3 Waterproof material Desheng

Shareholders of Desheng Waterproof pledged 11 million shares to provide guarantee for the financing of 14 million yuan - waterproof material Desheng

It was reported on February 20 that Li Desheng, a shareholder of Tangshan Desheng Waterproof Co., Ltd. (securities abbreviation: Desheng Waterproof Securities Code: 833336), pledged 11 million shares to Bank of Tianjin Tangshan High tech Zone Sub branch for financing guarantee. According to Digbei.com, the shareholder Li Desheng pledged 11 million shares to Bank of Tianjin Tangshan High tech Zone Sub branch. Of the shares pledged this time, all are shares with limited sales conditions, accounting for 5.31% of the company's total share capital. The pledge period is from January 12, 2017 to January 10, 2018. It is understood that Li Desheng is the controlling shareholder of Desheng Waterproof and serves as the chairman of the board of directors of the company. After this equity pledge, 90.5 million shares have been pledged, accounting for 43.72% of the total share capital. The pledged shares were used for the Financing Contract signed between the Company and Bank of Tianjin Tangshan High tech Zone Sub branch on January 10, 2017. Contract No.: Tianyintang High tech Zone (loan) 2017 No. 001, and the financing amount was 14 million yuan to provide guarantee. According to the data of Digbei New Third Board Research Institute, the main business of Desheng Waterproof is the research and development, production, sales and construction of waterproof materials. In the first half of 2016, the operating revenue was 216 million yuan, an increase of 9.05% over the same period of the previous year; The net profit attributable to the shareholders of the listed company was 21.5863 million yuan, an increase of 31.60% over the same period of the previous year. Netizen comments

label: High tech zone waterproof pledge pledge High tech Zone waterproof Waterproof material Desheng

Music gift bag TECSUN HD80 digital player/front/ear amplifier all-in-one machine - waterproof material

The article is from New Audio, February 2017. On the right side of the body is a Type-C double-sided USB charging interface and a card slot that supports high-capacity SD cards. The original factory attached a 16G high-speed card full of test content. TECSUN is a newcomer in the hi fi sound industry, but if we broaden our attention to the radio field, then everyone knows the great reputation of Tecsun. Founded in 1994, DeSheng has been focusing on radio, and has an incomparable position in the field of radio. Sound is this. Liang Wei, the boss of Desheng, who graduated from South China University of Technology in the early years, has been keen on radio since childhood and likes tossing about. He has never stopped studying radio and sound technology since he graduated from college in 1982, whether in middle school or as an educated youth. He has a very persistent pursuit of product development and quality. He is a typical craftsman. I have known Mr. Liang for a long time, but it was only a year or two ago that I really made contact with him. Every time I met with Liang Sheng, I would always see him playing with some new products. He enthusiastically and unreservedly communicated his development experience with others and solicited their opinions. After decades of product development, we can still maintain our entrepreneurial passion, which is really valuable! Although Mr. Liang has achieved success in the radio industry, his love for good music and sound over the years as a Singer has inspired him to develop hi fi products. So we saw the HD100 high fidelity music player prototype in 2014. Unfortunately, due to the CPU performance constraints in the early years, this product could not keep up with the demand for reading speed and was not put into production in large quantities. However, the exquisite appearance design and exquisite workmanship are refreshing. Later, Desheng learned a lesson and developed a series of audio products, such as HD80 audio butler, power amplifier and speaker. At the same time, it also made more exploration on the sound and functions of traditional radio products, developed a very cost-effective B5 Bluetooth digital player, and a V5 Bluetooth/Wi Fi digital player with more perfect performance and technology, which soon became a hot item in the market. The new transformation of Desheng is really impressive. It should be the "grass root headset" that was launched at the end of last year. This headphone, which costs only 700 yuan, is made of walnut, wrapped with high-quality leather, and comes with a wooden packaging box. It is very simple and tasteful. What is more impressive about this "grassroots headset" is that it uses a large caliber driver unit with the same structure as a foreign brand's headset. However, the price of this foreign product with the same unit is 3-4 times that of "grassroots". The sound performance of "grassroots headset" is close to the level of 2000 yuan, and the performance ratio is self-evident. At the same time, Desheng also brought the HD80 digital player/front stage/ear amplifier all-in-one machine, which can form a relatively simple hi fi sound system only by connecting a pair of active speakers or power amplifiers. As the front stage of the sound system, it uses a large capacity battery for power supply, completely eliminating the exchange of sound. This machine is not large in size and has its own high and low impedance monitoring earbuds. It can also travel with a pair of good headphones. It has a wide range of uses and excellent performance. Let's take a closer look at what HD80 can do. The knob on the left side of the display screen is the volume control on the top, the DSPEQ selection on the bottom, the charging indicator light and the recording peak indicator light. The two small buttons on the bottom are respectively the deletion of the DSPEQ function key HD80. At first glance, I always feel that the appearance of the machine is a bit different. The pure plastic shell also lacks a sense of quality, but when it is actually used, The HD80 is placed on the desk, but the design is very humanistic. The dashboard like knob and key layout is reasonable, and the deliberate control interface combines traditional and modern usage habits, which is easy to use; The slightly inclined panel makes it easier to view the display screen. The screen is not large or small, and the pixel seems not too high, but it can clearly display all information. For example, the file name is neatly displayed on each directory layer entering the file menu, the playing track shows the progress in the form of time axis with numbers, and the volume is also scaled with numbers to clearly display the status when adjusting the volume, Adjust EQ and other options are clearly displayed. Different function knobs and keys are arranged on the left, right and lower sides of the display screen. There are two small knobs on the left, the upper knob is used for volume adjustment, and the lower knob changes the equalization mode; On the right is a large multi-function knob for menu/track selection and confirmation. The lower two rows of keys are recording/playing/selecting/EQ equalization/playing status and other functional options. There are two 3.5mm monitor earphone output jacks on the lower left side of the fuselage, which correspond to high and low impedance earphones respectively, to adapt to the drive of various impedance earphones. The actual effect is excellent. There is a USB socket and an SD card socket on the right side of the machine. The original machine is delivered with a 16GB high-speed SD card, which is full of test audio and various music files. Of course, players can change the SD card or copy their favorite content at any time. Looking at the back of the machine, you will suddenly find that this compact HD80 is equipped with stereo RCA input and output ports, indicating that HD80 can also be connected to external analog inputs, with digital and analog front-end functions, and the output port is used for external rear power amplifiers. In addition, HD80 is also equipped with a B-type USB interface that can be connected to an external computer for USBDAC use. What's more surprising is that HD80 can record analog input audio, transcribe audio input signals into 24bit/48k or 24bit/96k wav format files, and store them in memory or SD card. This brings more playability to HD80, for example, it can be connected to the analog output of the SACD machine with good sound quality, expensive and difficult to track, and directly "track grasping"; It can also be connected to a phonograph amplifier to record the analog music of black glue into digital files; Connect the tuner and record the broadcast sound worth saving; When karaoke, you can connect to the line output of the wireless microphone for live recording! In addition, HD80 also has high/low recording level control, and recording is an overload peak level indication. All the above functions can be operated through the full function remote control. In addition, the HD80 has two 18650 mA lithium batteries in parallel for power supply. I measured that the endurance time is at least 10 hours. The DC power supply completely avoids the noise interference that may be introduced by the AC power supply, so the sound performance is cleaner and more pure. Above the back of the fuselage is the battery box door, which contains two 18650 mA lithium batteries for parallel power supply, with a total capacity of 5200 mA. The measured endurance is more than 10 hours. The pictures of the lower row of various input and output terminals are from left to right, which are coaxial input, B-type USB input, RCA analog input The RCA analog pre output is a satisfactory digital broadcast audition process. I can copy the usual audition files into the SD card, which is more convenient. I have also used the USB cable of SoundArt to connect to the computer, but I always feel that the convenience is not as good as HD80 for direct digital broadcast. In terms of sound quality, I really can't hear how much difference there is. HD80, as a digital broadcast and pre stage, is connected to the E50 integrated camera on the high shift. The volume of HD80 is fully turned on and controlled by the camera. In fact, you don't have to worry about distortion when HD80 output is too high, and you can also get a larger dynamic performance. Of course, you can also preset the volume of the power amplifier and use HD80 to control the volume of the audio system. Compared with the Soulnote entry-level S300 CD player, the HD80 is 50% cheaper than the S300. Is the sound far away? In fact, by comparing the CD of the same recording with the track grabbing file, HD80 is obviously more stable and beautiful than the S300 in timbre, with a wider sound field. It is an undisputed fact that HD80 is more balanced and transparent when replaying records of various styles, with better sound effects. When the symphony is replayed, HD80 can provide a delightful sound effect. Its reception and playback are more attractive from the following low-frequency parts with prominent potential and distinct knot image. This unexpected result really surprises me. In the past, the weak point of low price digital broadcasting was that its low frequency performance was not good, and it was often expected only in the aspects of timbre fineness, analytical power and natural purity. Now I can actually see its outstanding performance in low frequency on HD80, so I have to ask Mr. Liang: How did you do it? HD80 has excellent control over low-frequency play and play, and its powerful sound effect can still be felt even if it replays Hugo's Yellow River Steel Association. In this respect, the more expensive CD player can't take advantage of it. To some extent, I think HD80 has better effect. In addition, the full frequency speed of HD80 is so good that it is hard to believe that such a small digital broadcast is responsible for it. Its speed is fast enough, but there is no sense of mechanization. Its sound quality is as active as that of more advanced CD players. In fact, HD80's performance is very balanced. It does not show off tricks. The full frequency thickness is moderate, and the timbre is fine and not hard. Although the sound quality is not silky smooth and shiny, and there is still no rich glycol level of superior red wine, the HD80 replayed records, whether vocal, violin, piano, guitar or electronic synthetic music, always give me a sense of intimacy. All types of recordings are always so easy to listen, without the urge to change songs. The main menu is displayed with icons and text, which can intuitively and clearly enter the memory or SD card folder selection interface, and can intuitively view the music in the selected folder. The correct error free recording function menu interface is displayed in both Chinese and English. The storage location, recording specification and input attenuation can be selected and then compared in depth. I have to be frank and frank, Compared with the S300 CD player, the HD80 performs better because it can reproduce a more in-depth sound field, a stronger potential at low frequencies and a more natural extension at high frequencies, which brings about the enhancement of music performance in the true sense, that is, the amount of music information is more abundant, and the life of music is fuller and more vigorous. For example, when Perlman's "The List of Cindela" is replayed, the timbre of the violin is more sad and lingering, and the resonance of the piano cavity is more qualitative. It is not so noble and gorgeous, but the details and overtones can also be completely reproduced. The music files replayed by HD80 always have more music information and show a broader music space. For example, the South American Mass played by tenor Carreras is replayed. The recording quality of this record is very high. The song is simple, sincere and rich, without any trace of affectation. The record is more prominent in the presentation of the sound field, broad and profound. When HD80 replays, the obvious feeling is that the depth is one third to one quarter longer than S300, and the hidden background is also particularly "quiet". Although the size of the chorus group does not give people a larger feeling, the sense of entity of mouth shape interpretation is obviously strengthened, with a clearer sense of positioning. The middle and low frequencies of the S300 are a little messy. The HD80 is well controlled, and has more natural flexibility, becoming more calm and powerful. Carreras' voice has more moisture, and his singing is more leisurely. Compared with his elastic singing voice, he also has a more natural warmth, which is hard to realize on the S300 CD player. As an ear amplifier, HD80 is very competent. It has two headphone jacks, high and low impedance. I believe that Desheng has made great efforts to design the ear amplifier. So the audition also found Desheng's own "grass root earphone" and HiFimanHE1000V2 earphone for audition. Driven by the "grassroots headset", the HD80 is really handy and skilful, with outstanding performance in both dynamic and sound fields. When HE1000V2 is inserted into the high impedance interface, the driving force of HD80 is just enough. The dynamic is not as leisurely as driving the "grass roots", but the overall sound quality is thicker, the colors are more colorful, and the sound field is larger and wider. For example, the rebroadcast of Giles' Beethoven's "Enthusiasm", the resonance generated by the rich and subtle vibration of the piano sound, was so rich and dense. Before this, many medium and high price portable digital broadcasts could not provide such a powerful sense of hearing. The dynamic and air feeling from high to low frequencies could be described as gorgeous and generous, which really surprised me. The HD80 earphone has accurate and exquisite sound, rich musical sense, grand dynamic, deep and wide sound field, and gorgeous timbre, which is exactly the sound of the digital audio amplifier I hope to have. The interface displayed when playing music has clear information. Please pay attention to the file format and bit rate information at the bottom left, HD80 perfectly supports the replay of DSD files. I can't find fault with HD80's sound performance, functionality and handling experience at this price. The only thing I can't make up my mind is the appearance style. I sincerely hope that in the future, Desheng can launch upgraded products based on the price of HD80 and HD100, so I have no reason to hesitate. Netizens commented on the old gas bar factory

label: HD80 headset replay HD80 to replay headset Waterproof material Desheng Which is the best roof waterproof material

hot wire! Desheng's new product will be released in 2017, continue to escort - waterproof material Desheng

It is reported that Desheng Technology, which has always focused on "ensuring safety and creating harmony", has constantly updated its products under the "pressure" of rampant thieves and according to market demand. In 2017, it developed a new generation of "Visitor Easy" and "Real Name Easy" products. Desheng Technology will hold an online new product launch conference on February 22-24. This conference will ceremoniously launch four products, namely, the Desheng flagship visitor machine TSV-5SC with "high beauty and great responsibility", the Desheng simple visitor machine TSV-5SA with "concentration is essence", and the Desheng smart self-service visitor all-in-one machine TSV-H7 with "lightweight but high-end" TSR-CS3. Not only in terms of functions, but also in terms of appearance, it pursues high-end atmosphere, and optimizes both in terms of connotation and appearance, so as to truly protect enterprises and institutions. This series of new product launches of Desheng is a concentrated debut of the 2017 new products of Desheng, which integrates more high-tech, allowing users to have a more intelligent thinking in terms of choice. There is no doubt that it is full of interest! What surprises will these new products have? We look forward to the new product launch at the end of February, and all the answers will be revealed! Netizen comments

label: Desheng New TSV tecsun New products TSV Waterproof material Desheng Which is the best roof waterproof material

"New Three Board Platform" Desheng Waterproofing (833336): independent and innovative comprehensive service provider of building waterproof system - waterproof material Desheng

Shandesheng Waterproof Co., Ltd. (hereinafter referred to as "Desheng Waterproof", securities code: 833336) was founded in 2000. After more than ten years of accumulation and precipitation, Desheng Waterproof has rapidly developed into a large-scale and collectivized company integrating research, development, production, sales and construction of waterproof materials. The group includes Tangshan Desheng, Tianjin Yuhong, Xinjiang Desheng Jianke and other wholly-owned subsidiaries. Desheng's waterproof products cover three categories and eight series of waterproof coiled materials, waterproof coatings and asphalt tiles. The company successfully passed the "China Building Materials Certification" ("CTC" certification) and the CRCC certification of the Ministry of Railways of China, and was awarded the certificate of "High Quality Supplier of Waterproof Materials for National Affordable Housing Buildings". The "Desheng Four Modernization" service system was awarded the Innovation Achievement Award for Management Modernization. Tangshan Desheng and Tianjin Yuhong were identified as Hebei Enterprise Technology Center and Tianjin Enterprise Technology Center respectively. Desheng Waterproof, a foundation layer enterprise, was listed on the NEEQ on August 19, 2015 and began market making on January 4, 2016. As of June 17, 2017, the total share capital of the company was 207 million shares, of which 105988100 shares were non restricted tradable shares and were traded on the New Third Board. Company Highlights The company is a high-tech enterprise in the new building waterproof material industry, and has the first grade qualification for waterproof construction. The company has always adhered to the development and application of independent intellectual property rights, relying on forward-looking research and development technology, and is committed to creating innovative products and construction methods with core technology. So far, the company has participated in drafting and formulating nearly ten national standards for products, and has obtained dozens of national patents and several provincial and municipal scientific and technological achievements. As of June 2016, it has 13 invention patents, 87 utility model patents, 2 design patents, and 1 EU patent, covering all fields of waterproof products. Integrated waterproof system solution provider. At present, the company has gradually transformed from a single waterproof material manufacturing and selling enterprise into an integrated solution provider of waterproof system. Combining the self-developed flagship products, the company can better provide downstream customers with integrated solutions from scheme design to construction acceptance. With the advantages of patented technology products and construction teams, we provide customers with comprehensive solutions for waterproof engineering through design and material selection, labor and material contracting, and learn from foreign advanced experience to introduce the mechanism of project quality warranty period, which is transformed from the current project quality warranty period to the project quality warranty period. The company sells its products mainly through direct sales, supplemented by distribution. The company's sales team has developed strategic dealers in each region of the country in municipalities directly under the Central Government, provinces and prefecture level cities. Most of the company's dealers are local influential waterproof engineering contractors. At the same time, the company has also vigorously developed direct marketing channels, set up branches in Shenzhen, and vigorously developed cooperation with top 100 real estate groups in procurement and infrastructure construction projects. In order to enhance the company's comprehensive competitiveness, the company upgraded its existing sales model. With the help of the company's patented technical products and the advantages of the construction team, the company provides customers with comprehensive solutions for waterproof engineering through design, material selection, labor and material contracting, so that the company changes from a traditional waterproof material manufacturer to a waterproof system service provider. Market performance trading: since the first transaction on September 4, 2015, the monthly average turnover rate is 1.80%. The first market making transfer occurred on January 4, 2016, and the trading volume of each quarter has fluctuated since then. In September 2015, the high turnover reached 5.5498 million shares, with a turnover of 3.4044 million yuan. As of February 8, 2017, the total turnover of the company's shares was 195205600 shares, the total transaction amount was 55.9626 million yuan, and the monthly average turnover rate was 1.80%. According to the company's 2016 semi annual report, the actual controllers of Yuanheng Optoelectronics are Li Desheng and Sun Yuying; The controlling shareholder is Li Desheng, with a shareholding ratio of 51.19%. In addition, among the top ten shareholders, institutional shareholders include Xi'an Aerospace Xinyuan Industrial Fund Investment Co., Ltd., with a shareholding ratio of 7.14%; Gongyi No. 5 Refractory Materials General Factory, holding 4.46% of the shares; Sichuan Meilian Borun Investment Consulting Co., Ltd., with a shareholding ratio of 2.81%; Jiaxing Tangdeda Investment Partnership (Limited Partnership), with a shareholding ratio of 1.93%. Since January 4, 2016, the company's stock transfer method has been market making transfer, and the sponsoring broker is Everbright Securities. As of February 8, 2017, there were 7 market makers, including Founder Securities, Everbright Securities, Haitong Securities, Nanjing Securities, Shanghai Securities, Tianfeng Securities and Zhongshan Securities. Main board related concept stock Dongfang Yuhong (002271. SZ): The company is a leading enterprise in China's waterproof industry integrating research and development, manufacturing, sales and construction services of waterproof materials, a national high-tech enterprise, and has an important enterprise technology center and post doctoral research station in the industry. The company has more advantageous production lines of multi-functional imported modified asphalt waterproof coiled materials, cold self-adhesive asphalt waterproof coiled materials and the world's advanced production line of environmentally friendly waterproof coatings. As a provider of system waterproof solutions, Dongfang Yuhong has played an excellent role in the application of waterproof systems in China's landmark buildings such as the Great Hall of the People, the Bird's Nest, the Water Cube and more than 85% of the 2008 Beijing Olympic venues, and a large number of major national infrastructure construction projects such as high-speed railways and subways, and has been highly praised by users and all sectors of society. The products are exported to more than 40 countries and regions such as Germany, Brazil, Venezuela, Poland, Turkey, Angola, Nigeria, South Africa and India. Financial data perspective According to the semi annual report of 2016, in the first half of the year, the company realized an operating income of 216 million yuan, a year-on-year increase of 9.05%, a gross profit rate of 38.12%, a year-on-year increase of 27.06%, a net profit of 21.5863 million yuan, a year-on-year increase of 31.6%, and a net cash flow of 4602600 yuan, a year-on-year decrease of - 71.21%. The increase in gross profit margin and net profit is mainly due to the fact that the main raw materials used for waterproof coiled materials are chemical and petrochemical products. During the reporting period, the prices of these products continued to fall. At the same time, the company optimized the production technology, improved the product formula, and the consumption of raw materials per unit product also continued to decline. In addition, foreign companies mainly provide overall waterproof solutions for the undertaken projects, which are mainly waterproof system projects, The unit construction profit also increased significantly than before. The reason for the decrease in net cash flow from operating activities is that the company's business was previously concentrated in northern China. Affected by the low temperature in winter, the first quarter of each year was the company's sales slack season. During the reporting period, the company's sales area expanded to the south and achieved some results. Due to the impact of the construction period, there were many projects that had not yet reached the settlement node in the reporting period. As a direct result, the cash flow from operating activities decreased compared with the same period last year. The rapid development of building waterproof material industry has resulted in overcapacity and low industry concentration. In recent years, the government has issued a number of policies. On the one hand, it has increased the elimination of backward production capacity enterprises to make their production meet new environmental requirements; On the other hand, we should improve the approval standards for enterprises with market access to ensure the production quality of enterprises. In the future, qualified and technology-based enterprises will be more popular. Since its establishment, Desheng Waterproof has been adhering to the concept of "building without demolition, waterproof without leakage", focusing on the production field of building waterproof materials, and has a high reputation; At the same time, adhere to the development and application of independent intellectual property rights, with industry-leading technological advantages; In addition, the company has advanced production equipment and high degree of production automation. In recent years, relying on its own accumulated patented technical products and construction team, the company has made great efforts to transfer from the traditional waterproof material supplier to the comprehensive service provider of waterproof system. Company website: http://www.tsdsfs.com Contact number: 0315-2084799 Data support: Lu Guohao's NEEQ team Introduction: When NEEQ entered a historical opportunity period, Guangzhou Securities Hang Seng was the first in the industry to establish a NEEQ research team led by the chief research officer. The NEEQ team has built an industry-leading NEEQ research system based on its rich research experience in capital markets and listed companies for a long time and in combination with the characteristics of NEEQ. The team has launched weekly reports, monthly reports, special topics and research product lines of industry companies, with perfect system and fruitful results. Team member: Yuan Ji (General Manager and Chief Research Officer of Guangzhou Securities Hang Seng): He has been engaged in securities research for more than ten years, and has won the title of "Annual Award of World Financial Laboratory - 100 Securities Analysts with Reputation", the 2015 Guangzhou high-level financial talents, the first prize of the topic research award of China Securities Association, and the important research achievement award of Guangzhou financial industry, He and his research team won six awards of "Taurus analyst" in China Securities Journal in 2013. In 2014, an earlier NEEQ research team was established in the industry to create a well-known research brand "NEEQ research geek". Zhao Qiaomin (leader of NEEQ Research Group, deputy chief analyst, and head of high-end equipment industry): Master of International Financial Market, University of Southampton, UK, with 7 years of experience in securities research. With cross industry and overseas research background. He won the second prize of 2008 and 2009 Securities Industry Association. Xiao Chao (Deputy Team Leader of NEEQ Research, Deputy Chief Analyst, Head of Education Industry Research): Master of Delft University of Technology, Netherlands, with 6 years of experience in securities research. In 2013, he was ranked top in the communication industry of "Taurus Analyst" of China Securities Journal, and has unique experience and accumulation in TMT industry development and company research. Wen Chaohui (a researcher in the new three board TMT industry): Master of Nanjing University, with a composite professional background in science and engineering and economics and management, seven years of experience in operator work, four years of experience in market analysis, and good at research in communication, Internet, informatization and other related aspects. Write a series of in-depth reports on big data topics, such as the basic chapter and the industry chapter, focusing on the research of big data industry chain, precision marketing, big data credit reporting and other subdivisions. Wei Yena (Research Fellow of NEEQ TMT Industry): Master of Finance, Bachelor of Remote Sensing and Geographic Information System of Sun Yat sen University, 3 years of experience in software industry, profound understanding and keen observation of computer, communication, Internet and other related fields, joined Guangzhou Securities Hang Seng in 2016, and engaged in research on NEEQ TMT industry. Huang Guan (NEEQ Education Industry Researcher): Master of Finance from Durham University, UK, with a composite background of cross industry and overseas research, responsible for education research, good at data mining and case analysis. Lin Quan (Research Fellow of New Third Board High end Equipment Industry): Master of Chongqing University, with a composite professional background of mechanical engineering and business management, has accumulated experience in Huawei's supply chain management and aerospace enterprises' lean production and process management projects, and has unique experience in industrial development and enterprise operation. Lu Binbin (NEEQ theme strategy researcher): Master of Finance, Johns Hopkins University, responsible for research in NEEQ market policy and other fields. Contact us: Tel: 020-88832292 Email: lubinbin@gzgzhs.com.cn Netizen comments

label: Three board research waterproof waterproof sampan Research Waterproof material Desheng

Degao Ceramic Tile Glue Evaluation Good Partner for Tile Paving - Ceramic Tile Glue Evaluation

Tiles are an indispensable building material in home decoration, so tile paving is a top priority, especially for wall tiles, which takes a lot of time. Under the condition of complete auxiliary materials and good base treatment, each worker can complete about 5 ㎡ in a day. Generally, it takes about a week to pave the bathroom and kitchen walls for home decoration. This is the traditional wet paving method, that is, cement mortar pasting. Is there a better way to shorten the construction period? This issue introduces a ceramic tile adhesive - Degao ceramic tile adhesive super strength (vitrified tile). Degao Ceramic Tile Glue is made of cement graded sand polymer admixture by modern technology. It is mainly used to paste ceramic tiles and stones of various specifications and materials. This product has excellent proportioning, simple and convenient paving process, saves time, and is relatively firm. The paving thickness is thinner, which saves space and reduces costs. Degao ceramic tile glue super strong vitrified tiles are packed in a valve bag with a specification of 20KG, which can be used to lay 3-4 ㎡ tiles. You can choose the appropriate quantity according to your actual paving area. Using scissors to open the Degao tile adhesive, we can see that the product is in the form of gray powder, similar to the color of cement, without smelling pungent odor. Mix Degao tile glue and cement mortar according to their respective proportions for standby. The former is fine and smooth without caking, while the latter presents caking and particles. Time saving: the construction is simple and fast. Next, the construction masters will demonstrate the construction of the wall on both sides prepared in advance, and paste 100 vitrified bricks on it to compare the speed and quality of the two construction. The cement mortar needs to wet the ceramic tile in advance. When paving, it needs to evenly plaster the cement mortar on the back of the ceramic tile, and then paste it on the wall, and press hard. This method is a great test of the master's construction technology. Compared with the paving process of cement mortar, the Yuhong waterproof wall Beili tile adhesive does not need to wet the wall and tiles in advance. When paving, only four steps of "one wiping, one scraping, one pasting, one pressing" can be followed. The 1 square meter wall was paved with Degao tile glue in 20 minutes by the master, but the wet paving method of cement mortar was not even half finished, and the brick fell off. It can be seen that the use of tile glue can save more than half of the time. Saving time is equivalent to saving labor, and thus saving costs. Convenience: The wall surface paved with Degao tile glue is beautiful and firm, neat and clean, with even gaps. If there is deviation, it can be adjusted in time, unlike the cement mortar, which needs to be knocked off and paved again once it is cured. Cost saving: For the walls with thinner paving thickness and Degao tile glue, there is almost no gap between the tiles and the wall, which can reduce the hollowing rate, while there are large gaps in the cement mortar, which is easy to appear hollowing if the master is not skilled. The paving thickness of Degao tile adhesive is only 5mm, while the paving thickness of traditional cement mortar is 10mm, which is twice as thin. This can save a lot of space for ordinary small houses. At the same time, the paving thickness also affects the amount of use, and the natural amount will be much less if it is thinner, thus saving costs. Degao tile adhesive is a time-saving, trouble saving and money saving adhesive. The test shows that the use of Degao tile glue to pave tiles is not only simple, but also can improve the construction process. The gaps of the tiles are even and beautiful, firm and safe without falling off. The paving thickness is only half of the traditional cement mortar, which can effectively save space and cost----------- I am a gorgeous dividing line -------- more wonderful home decoration design and layout, please pay attention to Qijia.com (WeChat: mall_jia). For more decoration inspiration and classic cases, please pay attention to Qijia Selection (WeChat: Qjiawan). (Editor in charge: Chen Tingting) Netizens' comments are not so clever. They are labor-saving but expensive. How much does the shop still need to give rebates to bricklayers per square meter? At such a fast speed, the masons earn two days' money a day by the square! I quickly changed my profession. It's better for Laozi to use easy clay. The wall is not vertical. Stick a wool??? Is it really so amazing that the company scrambled to use the decoration earlier, and you will die if you don't advertise on the practical post?? I don't know who still uses 100 * 100 bricks.... Try an 800 * 800!!!!! If the wall is uneven, how do you adjust it to 5mm???? Level first and then use your glue??? Take off your pants and fart!! The teacher can adjust the verticality with cement mortar!!!! It is also expensive that the beauty in use is the construction problem of skilled workers. It is recommended that you understand the Chenguang ceramic tile adhesive. The main thing for tiling is that there will be no hollowing and falling off. Chenguang ceramic tile adhesive can well avoid this problem. Good is good. Nowadays, developers do not need technicians to build houses. They rely on construction personnel to play their roles freely. The cement wall is vertical and the brick wall is vertical and flat at more than 1 to 2 cm. I think it is better to pave and paste cement mortar quickly. The ceramic tile adhesive requires too much on the wall surface, which may not be fast. It is normal for the wall tile to have some holes. It seems that Gaode Company has given you a lot of benefits! Toxic//@ watch me start in 5th gear: used

label: Cement mortar tile wall cement mortar metope Ceramic tile adhesive evaluation Application method of tile adhesive Degao tile adhesive