shine

Guangguang JSQ22-AH gas water heater assesses that in today's urban life, bathing is almost as important as eating and sleeping, and is a daily necessity. If you want to have a good bath, you must give your power to the water heater. Today, I will evaluate Guangguang JSQ22-AH gas water heater. This gas water heater is recognized by more and more users because of its high efficiency, speed, safety and energy saving features. Whether a gas water heater can bring users a comfortable use experience should consider the safety performance of the product (anti CO back flow, CO alarm, etc.), temperature control ability, energy conservation, etc. Today, the Guangguang JSQ22-AH gas water heater to be evaluated by Xiao Bian uses the UES storm eye simulation technology, which can automatically adjust the speed of the fan according to the detected outdoor wind force, with a large wind resistance capacity of 24m/s, which can withstand the level 9 wind, and prevent carbon monoxide from flowing back; At the same time, Guangguang JSQ22-AH is also equipped with a C0 alarm to constantly detect the concentration of carbon monoxide in the indoor air. Once the CO concentration exceeds the safety value (150ppm), the fan will automatically start to discharge the excessive carbon monoxide in the room. Through double insurance, it will ensure that there is no odor in the room, giving everyone a green forest like home environment. Shining JSQ22-AH can achieve a constant temperature accuracy of ± 0.5 ℃, so that the bath can say goodbye to "hot and cold"; Guangguang JSQ22-AH has low-pressure combustion technology, which can achieve more stable combustion and improve combustion efficiency;. After the video evaluation of Guangguang JSQ22-AH gas water heater, do you think Guangguang JSQ22-AH is very safe and reliable? Let's talk about data. "Self reported home" - product introduction Guangguang JSQ22-AH gas water heater has excellent anti carbon monoxide reverse flow technology and strong wind resistance technology. In addition, constant temperature difference (± 0.5 ℃) can bring users a new comfortable bathing experience. Its four core technologies enable the product to bring users a more perfect use experience. Core technology I: UES storm eye simulation technology (strong wind resistance, capable of resisting level 9 gales). High rise buildings are no longer afraid of wind. Imported high-efficiency DC variable frequency motors are used, with a large wind resistance capacity of 24m/s. When the external wind pressure increases, the fan automatically adjusts its speed to easily resist wind and exhaust, and the water heater always maintains a stable combustion state. Core technology II of the USE technical logo: CO alarm, all-weather safety guard. Guangguang JSQ22-AH is equipped with a CO alarm to constantly monitor the concentration of carbon monoxide in the indoor air. Once the safe concentration (150ppm) is exceeded, the fan will be started immediately to discharge the excessive carbon monoxide in the room, bringing users safe and reassuring bath guarantees. Core technology 3 of CO alarm sign: constant temperature precision (± 0.5 ℃). It uses 85 ℃ anti dry burning temperature controller, with the action temperature point of 83 ℃. The overheat protection temperature point is low, and the response time is short. It can achieve accurate temperature control of ± 0.5 ℃, ensuring bath safety, high temperature resistance, and long service life. The following test links include the test of the machine's precise temperature control capability. Core technology IV: low pressure combustion technology to achieve more stable combustion of the system. When the gas pressure fluctuates within 0.5-1.5 times of the specified pressure, the output pressure remains unchanged to ensure stable combustion and stable outlet water temperature. Energy efficiency curve of combustion system anti carbon monoxide backflow test I: the key to measuring the quality of a gas water heater by natural wind is whether the anti backflow of the product is excellent. Once the phenomenon of backflow occurs in the use of a gas water heater, the consequences are unimaginable. An excellent gas water heater must have a very excellent anti backflow function, Next, we will conduct a systematic test on the anti backflow of Guangguang JSQ22-AH gas water heater. The UES storm eye simulation technology of Guangguang JSQ22-AH gas water heater is equipped with imported high-efficiency DC variable frequency motor, which has a large wind resistance capacity of 24m/s. When the external wind pressure increases, the fan automatically adjusts its speed to easily resist wind and exhaust, and the water heater always maintains a stable combustion state. First, we tested the anti backflow ability of Guangguang JSQ22-AH in daily use. We first measured the outdoor wind speed with an anemometer, then turned on Guangguang JSQ22-AH gas water heater, and tested the indoor CO concentration 10 minutes later and 30 minutes later. Outdoor wind speed: 2.4m/s Indoor CO concentration after 10 minutes: 0ppm Indoor CO concentration after 30 minutes: 0ppm Simulate the test under normal use (outdoor wind speed 2.4m/s), indoor CO concentration is zero after 10 minutes of operation of the water heater, and indoor CO concentration is still zero after 30 minutes of operation. Under normal use, there will be no CO backflow in Guangguang JSQ22-AH. Test II of anti carbon monoxide backflow: the fan simulates medium and strong wind, points the small fan at the gas exhaust pipe for air blowing, then turns on the gas water heater, observes the change of the gas water heater, and monitors the indoor CO concentration with the CEM air quality tester. The small fan has a large wind speed: 3.95m/s small fan is aimed at the gas exhaust pipe to blow the carbon monoxide concentration monitoring in the room. When Guangguang JSQ22-AH is running, the small fan with a wind speed of 3.95m/s is used to blow at the exhaust pipe of the water heater, and no carbon monoxide is detected in the room during the monitoring process. In addition, the steady rotating speed and noise of the fan during operation are not abnormal, so it can be said that the JSQ22-AH is very easy to cope with the wind speed of 3-4 wind. Test 3 of anti carbon monoxide backflow: reduce the cross sectional area of the air outlet to simulate strong wind. Use wet towels to block part of the standard ventilation duct of the product to reduce the cross sectional area of the air outlet. Under the same wind force, the ratio of the reduced residual cross sectional area to the original cross sectional area of the ventilation duct is approximately equal to the multiple of the increased air volume. (This experiment is dangerous and can lead to death, please do not operate without authorization) Use wet towels to block some exhaust ducts. It is estimated that the cross sectional area of the blocked exhaust duct accounts for about 4/5 of the cross sectional area of the duct, that is, the ratio of the remaining cross sectional area to the original area is 5, which is equivalent to a 5 times increase in air volume. The actual outdoor wind speed is 2.4m/s. The reduction of the cross-sectional area of the exhaust duct is equivalent to a five fold increase in the wind speed. The wind speed is about 12m/s. After the machine runs for 10 minutes, the CO concentration in the indoor air is tested. After ten minutes, the indoor CO concentration is still zero. The simulated wind speed can reach 12m/s by reducing the cross section of the exhaust pipe. After ten minutes of machine operation, the indoor CO concentration is still zero. Test IV of anti carbon monoxide backflow: the extreme wind speed is 24m/s, and the wind resistance capacity of Guangguang JSQ22-AH hot gas water heater is relatively large, reaching 24m/s. I wanted to wait for this stormy weather for an actual test, but unfortunately, "the weather is not beautiful", we had to wait for a week for the stormy weather, so we can only continue to use simulation experiments to test the extreme wind resistance of Guangguang JSQ22-AH. Similarly, wet towel is used to block part of the standard ventilation duct of the product to reduce the cross-sectional area of the air outlet. Under the same wind force, the ratio of the remaining cross-sectional area to the cross-sectional area of the original ventilation duct after reduction is approximately equal to the increased air volume multiple (this experiment is dangerous and can lead to death, please do not operate without authorization). At this time, we use the electric hair dryer as the source of the wind. After testing, the electric hair dryer can produce 8.19m/s wind, and then use the electric hair dryer to blow out the ventilation duct that is blocked at the part of the air outlet. Large wind speed of the hair dryer: 8.19m/s The wind speed of the hair dryer at the outlet partially blocked by the hair dryer is 8.19m/s. The reduction of the cross-sectional area of the exhaust duct is equivalent to three times of the wind speed. At this time, the wind speed is about 24m/s. After the machine runs for 10 minutes, the CO concentration in the indoor air is tested. At this time, the indoor CO concentration is still zero. The simulated wind speed can reach 24m/s by reducing the cross section of the exhaust pipe. After the machine runs for ten minutes, the indoor CO concentration is still zero. So it seems that Guangguang JSQ22-AH has excellent wind resistance and anti backflow ability. Without backflow, there will be no insufficient combustion. Without insufficient combustion, there will be no CO, so consumers can use Guangguang JSQ22-AH gas water heater with ease. Performance measurement - energy consumption test is very concerned about the energy consumption of gas water heater. Next, we will measure the energy consumption of Guangguang JSQ22-AH gas water heater (energy consumption refers to the consumption of gas). First, we set the outlet water temperature to 42 ℃, and relevant research shows that 40 ℃ water temperature is more comfortable for bathing. Then we turn on the shower in the bathroom for 10 minutes to make the water heater run for 10 minutes, and calculate the gas consumption. When the outlet water temperature is set to 42 ℃, open the shower in the bathroom and open the water mixing valve to the hot water section to record the gas consumption of the gas meter. The gas consumption is 499.960m3. After 310 minutes, close the shower and record the gas consumption of the gas meter again. The gas consumption is 470.184 m3. After calculation, when the outlet water temperature is set to 42 ℃, the gas consumption is 0.224 m3 for 10 minutes (simulating a bath time), If the average fuel gas per cubic meter in Beijing is about 2.5 yuan, the fuel gas cost per bath is about 0.6 yuan. The electric energy consumed by Guangguang JSQ22-AH during operation is almost negligible. Electric energy test: performance test with operating power of 35.25W - temperature control capability test whether the water heater can bring users a comfortable bathing experience. The temperature control capability of the water heater plays a vital role. If the water in the bath is hot and cold, it will be a very troublesome thing. Stable water temperature is the key to a comfortable bathing experience. Next, we will measure the temperature control ability of Guangguang JSQ22-AH. Set the temperature to 42 ℃, and measure the water outlet temperature: 42 ℃ Set the temperature to 42 ℃, and the measured water outlet temperature is 42 ℃, and the temperature difference is 0. Set the temperature to 60 ℃ and measure the water outlet temperature: 59.9 ℃ Set the temperature to 60 ℃ and the measured water outlet temperature is 59.9 ℃ and the temperature difference is 0.1 ℃. Appearance display - simple, fashionable, scientific and technological gas water heaters are generally installed in the bright place of the kitchen, so the appearance design of gas water heaters is also very important. The Guangguang JSQ22-AH gas water heater adopts a metal brushed appearance design, which makes the product show a scientific and technological style. Although the appearance design of the machine is full of science and technology, the style is simple, fashionable and generous, which is really a very excellent industrial design. Shining JSQ22-AH Appearance Shining JSQ22-AH's panel is a one-time molding design, which is easy to clean and makes the product more beautiful. Close up of metal wiredrawing panel Touch control panel The machine adopts the touch control panel design of "white characters on black background". The JSQ22-AH temperature can be adjusted in the range of 35-70 ℃, 19 sections in total. The comfort memory function can preset two commonly used temperatures. Press the corresponding button when using, you can enjoy the hot water at the temperature you set. Part name Energy efficiency identification Product details - Although the heat exchanger (water tank) with genuine materials and fine carving of gas water heater is not a part with high scientific and technological content, the heat exchanger (water tank) is one of the core parts of gas water heater products, and also a part that can better reflect the product quality and manufacturer's feelings. At present, oxygen free copper is the best material used as heat exchanger (water tank). Oxygen free copper heat exchanger (water tank) can effectively improve the performance and service life of products. Internal overview of Guangguang JSQ22-AH Details of Guangguang JSQ22-AH heat exchanger Guangguang JSQ22-AH heat exchanger (water tank) is oxygen free copper design. Use a sharp tool to gently scratch the surface of the heat exchanger, and it can be seen that all of them are yellow. The above is the entire content of this evaluation of Guangguang JSQ22-AH gas water heater. Guangguang JSQ22-AH gas water heater has intelligent wind resistant technology, and has imported high-efficiency DC frequency conversion motor, with a relatively high wind resistance capacity of 24m/s. When the external wind pressure increases, the fan automatically adjusts its speed to easily resist wind and exhaust, The water heater always keeps stable combustion state. During the test, the wind speed of Guangguang JSQ22-AH with 3-4 wind force will not have any backward flow. According to the analysis of the rotating speed and noise of the operating fan, even if the wind force increases by 1-2 times, Guangguang JSQ22-AH will not have any backward flow. A good water heater must have excellent temperature control ability. The temperature control ability of Guangguang JSQ22-AH can be described as impeccable. The constant temperature accuracy (± 0.5 ℃) is 85 ℃. The action temperature point is 83 ℃, the overheat protection temperature point is low, and the response time can achieve accurate temperature control of ± 0.5 ℃. After testing, the temperature difference between the actual outlet water temperature and the set temperature of Guangguang JSQ22-AH is only about 0.2 ℃. In addition, the temperature response speed of the machine is very fast, which can bring users a more perfect bath experience. Guangguang JSQ22-AH interprets perfect industrial design to consumers with simple and fashionable design style in appearance design, and its metal brushed appearance design makes it full of science and technology. No matter what decoration style, it can be well combined. The touch type microcomputer control panel design makes the operation easier and shows the humanized design concept. In terms of details, Shining JSQ22-AH gas water heater is finely carved with real materials, and both pipe welding and final assembly are very fine, demonstrating the spirit of craftsmanship. Guangguang JSQ22-AH gas water heater is a very energy-saving product. Through the actual test, the gas cost of each bath (calculated in 10 minutes) is about 0.6 yuan, which is very economical. Based on a series of evaluations on Guangguang JSQ22-AH gas water heater, I can tell you that this is a very good product and this water heater will bring you an unexpected comfortable bath experience. Netizen comments

Which integrated cooker is good? The integrated cooker can realize intelligent control. The ignition automatically turns on the fan, and automatically delays the shutdown and flameout. Many families also use this product today. What kind of integrated cooker is good? What kind of integrated cooker is good? 1. The integrated cooker passing the national inspection report is safe and reliable, and its quality is guaranteed. 2. I don't want the so-called automatic cleaning function. 3. The higher the power is, the better. It should not only save energy and power, but also have a mute effect. 4. Experience the noise size on site and check whether the operation is stable. 5. Whether there are safety protection functions such as flameout, air leakage and child lock. 6. Observe whether the surface has defects and whether the corner treatment is smooth. 7. The appearance design and color should be coordinated with the decoration of the kitchen. 8. Whether there is a good after-sales service system. 1. The integrated creative design perfectly integrates the functions of range hood, gas stove, disinfection cabinet, storage cabinet, microcrystalline stove, induction cooker, etc., with unique combination and high-efficiency range hood effect, to maximize the use efficiency of various functions, and fully automated intelligent control, It is true that the smoke absorption rate of high-end kitchen appliances with green environmental protection is more than 99%. It is creative to use micro aerodynamics principle to isolate the pollution source from the external environment in a two-way way, which can not negatively affect the operating vision. 2. Clean kitchen environment. The traditional kitchen equipment has a long space circulation distance of lampblack, and the lampblack spreads seriously. In the process of decline, most of the lampblack spreads to the interior, causing the kitchen walls and objects to be full of oil dirt. The public health work of the kitchen has become a heavy and complicated task. 3. It is true that the exhaust design under low noise stops placing the noise source of the human head, and it is applied to the ultra-low, noise technology and silent air duct design technology to reduce the noise. 4. The intelligent control of modern control system organically integrates the gas stove, range hood, disinfection cabinet, etc. according to the general use mode of people, and the computer control operation is very simple and convenient.

Is it good to install the integrated cooker? It is very difficult to choose household appliances freely in the decoration of kitchens, so some families can choose integrated stoves freely to avoid difficulties. How about installing integrated stoves? How to choose and purchase integrated stoves? Is the installation of the integrated cooker good? 1. The suction of the range hood: they all say that the suction of the integrated cooker is much better. Personally, I think the suction of the integrated cooker is not much different from that of the range hood. Of course, there is no test data, just a subjective feeling, and there is no doubt that different brands and models are different. It is often said that stir fried peppers cannot smell. Anyway, if my parents' kitchen door is not closed, they will still smell stir fried peppers, let alone stir fried peppers. This is a molecular movement. How can they not smell. 2、 Installation problem: The integrated cooker is of the bottom row type, and the holes in the public flue of general commercial housing are all on the top, so a new transformation is required to plug the holes on the top and open the holes on the bottom. The smoke pipe shall pass through the floor cabinet, and the floor cabinet shall be perforated. 3、 Space saving: The position of the integrated stove can save about one meter of cabinet money, and the upper position can be used as a wall cabinet to improve storage. That's right, but the integrated cooker is a lower exhaust pipe. The floor cabinet from the integrated cooker to the middle of the flue must be perforated through the flue, occupying the space inside the lower cabinet. there are both advantages and disadvantages. 4、 Price problem: most integrated stoves are integrated with cigarette machines, stoves and disinfection cabinets, so the price is generally high, which is equivalent to the price of three sets of first-line cigarette stoves, and may also be high. Another reason is that the sales volume of traditional cooker manufacturers is far higher, and the sales volume is better, so the cost will also decline. Of course, the pricing is not linear with the cost. However, the integrated cooker can save some money on cabinets. For users who do not need disinfection cabinets, it is equivalent to packaging and reselling disinfection cabinets. Of course, today there are also split integrated stoves. 5、 Service problem: The integrated cooker market is also a mixture of good and bad people, and there are few good after-sales services. For example, my parents' home is an unknown brand, and there was a repair in the middle. As a result, the factory found a third-party maintenance worker to serve, and the business is not very skilled. You can search for word of mouth and comments on the website before buying. 6、 Why don't brands of first-line stoves be manufactured? This is not a problem. The market share of the integrated cooker is too small compared with that of the cigarette machine cooker. Brands like Fang Tai and the boss are making good money when making cigarette machine cookers. Why invest money to develop another alternative product? Besides, this product is not subversive. 7、 Conclusion: The air outlet of the integrated cooker is closer to the lampblack, and theoretically, the suction will be better; Can save part of cabinet investment; The surface is easy to scrub; The price of integrated stoves is slightly higher; The installation will be more difficult than that of the cooker; Generally, the function of disinfection cabinet will be integrated. How to choose integrated stoves 1. The size of firepower depends on the suction. The selected air volume and air pressure are quite large, and the smoke exhaust effect is good. It depends on the fire power. The fire power is large and can be adjusted in a wide range to meet the needs of various cooking markets. Air volume and air pressure, the higher the air volume, the slower the kitchen smoke can be discharged. 2. Convenient cleaning silencer, easy to clean, some products have cleaning function. 3. The working noise cannot reach 60 decibels.

The integrated stove greatly saves the kitchen space, and thus plays a role in energy conservation and environmental protection. With the application of integrated stoves in household, it is necessary to clean and maintain integrated stoves. Many people think that cleaning integrated stoves is a troublesome thing. How to clean integrated stoves correctly? What are the methods? How to clean the integrated cooker correctly 1. When cleaning the pot rack, the owner can use a soft brush to clean it. It mainly cleans the surface of the base, ignition needle, thermocouple, etc., and timely removes the dirt stuck on the surface. This avoids the possible drawbacks of stubborn stains on the cleaning burner caused by granular cleaning agents, steel wire balls, knives, etc., or it may damage the ignition needle, thermocouple flameout protection needle and other vulnerable facilities, resulting in failure of the safety device of the integrated environmental protection stove, and wear on the surface of components, which will affect the future service life of the integrated stove. 2. Clean the surface of the stove with soft gauze and soapy water, which can greatly maintain the stove table. However, do not use granular cleaner or steel wire ball for cleaning, which will cause scratches on the stainless steel surface, thus affecting its beauty. In addition, pay attention to cleaning the oil smoke exhaust passage. After the integrated cooker is used for a long time, a large amount of dirt will appear on the oil smoke extraction channel, and then the channel should be cleaned every other time. When cleaning the flue, it is better to use degreasing agent for cleaning. Start the lowest gear of the range hood first, and then spray the degreaser to let it suck into the channel. After that, the dirt will be decomposed by the degreaser and then flow into the oil pan. 3. If the owner of the clean combustion hole finds that the flame is uneven and some holes have no flame during use, this is the phenomenon of blockage. When this happens, the fire hole on the fire cover should be cleaned. After the burner cools down, remove the fire cover and use a steel needle to remove the carbon deposit in the fire hole. Do not use water to flush the fire cover. At this time, bubbles will block the fire hole, and do not use a hard object to wipe its surface. This will cause black enamel, which will make it impossible to repair the damage. 4. To clean the integrated stove disinfection cabinet is to timely wipe off the accumulated water on the chassis and the dirt on the food rack, and regularly maintain them. The integrated cooker is basically in the form of side suction and down exhaust. The oil spots gather at the lower part of the body, and the oil stain adhesion speed is not fast. After 2 years of use, it needs to be cleaned. Otherwise, various problems will arise.

How much is an integrated cooker? Due to the traditional Chinese cooking habits, lampblack has always been a problem. How can we solve the problem of soot to the greatest extent and protect the health of family members? How much is an integrated cooker? What are the advantages? The price of integrated cookers varies due to different brands, models, materials and manufacturers. Of course, the price of integrated cookers will also vary. The price of integrated stoves generally ranges from several thousand yuan to tens of thousands yuan. (This price is for reference only) Advantages of integrated cooker 1. Integrated creative design. High efficiency lampblack effect, fully automatic intelligent control, adhering to the requirements of green environmental protection. 2. Modern control system. Intelligent control, easy and convenient operation. 3. Low noise is really achieved. Ultra low noise technology and silent air duct design technology. 4. Ultra high smoke extraction rate. The smoke absorption rate is more than 99%, giving you a clean kitchen environment. 5. Maximize space saving resources. Use the lower row design to provide more space for the kitchen. 6. Comprehensive security upgrade. It can play the role of safety protection and has high safety assurance coefficient. 7. Healthy and pollution-free. It eliminates the negative factors affecting health. 8. Green and environmental protection. With the side suction and bottom exhaust technology, the smoke exhaust effect is more than 99%, which has the effect of environmental protection.

Is the integrated cooker better or the range hood better? The price of integrated cookers is relatively high, which can cost tens of thousands of yuan at random, while that of ordinary range hoods is thousands of yuan. The price difference is so big, so is the actual function really different? Is the integrated cooker better or the range hood better? Advantages of integrated cooker 1. Higher oil smoke absorption rate is the original intention of integrated cooker research and development. Even for ordinary integrated cookers, the oil smoke absorption rate is more than 99%. The integrated cooker has innovatively applied the principle of micro aerodynamics, isolated the pollution source and the external environment in two directions, and used the way of downward smoke suction to achieve the goal of not affecting the operating line of sight and not passing through the human respiratory pathway, The lampblack and hot gas will be removed before diffusion, giving you a clean kitchen environment. 2. The integrated cooker perfectly integrates the functions of range hood, gas cooker, disinfection cabinet, storage cabinet, microcrystalline cooker, induction cooker, etc., realizing the maximum use efficiency of multiple functions, facilitating the use of consumers, and eliminating the need to purchase electrical appliances one by one. It is really efficient and convenient. 3. The traditional range hood works in the position of human ears, and after a long time of use, the noise is high, which is easy to cause human upset, dizziness, tinnitus and dizziness. The design feature of the exhaust air under the integrated cooker eliminates the noise source placed on the head of the human body, and the integrated cooker generally applies the ultra-low, noise technology and silent air duct design technology to reduce the noise. 4. The design concept of integrated cooker integrates multiple product functions, which eliminates the space of the traditional wall mounted range hood above, and the large suction makes it possible for the modern kitchen of the island style and open style, which can save a lot of partition decoration costs and greatly increase the space utilization rate. 5. The integrated cooker is more healthy and environmentally friendly. The micro aerodynamics principle is used to remove the lampblack downward, so that the lampblack does not enter the human face and protects the facial skin and respiratory system. 6. At present, most of the integrated stoves on the market have the functions of automatically cutting off the gas source after flameout, automatically cutting off the power supply after leakage, automatically detecting gas leakage, automatic suction and discharge of odorous gas exceeding the standard, and regular reminder. The side suction type integrated environmental protection stoves are safer. Because the side suction type integrated environmental protection stoves adopt a side suction manufacturing structure, the air outlet is far from the fire source, and the use process is safer. Advantages of the range hood: 1. The panel technology of oil smoke separation is adopted, which can separate the oil smoke, and the oil stain will not enter the inner cavity of the range hood, so that the inner cavity is free of disassembly and washing, and the service life of the range hood will not be affected. 2. Because of its inclined plane design, the side suction range hood will not encounter head contact and drip. 3. Because it is very close to the stove, the lampblack can be locked in the first time, and the side air intake is adopted without smoking flames, which will not waste gas. Is the integrated cooker better or the range hood better? 1. The most important thing about the range hood is that the oil smoke of the traditional range hood comes out directly from the pot. First, some of the oil smoke is dissipated due to the air flow, and then some of it is smoked by us. The remaining oil smoke that can be smoked by the range hood may be less than 50%. After a meal, the whole person has become an air purifier. The whole kitchen is still waiting to be cleaned. If your family's diet is heavy on taste and likes stir frying. It is still recommended to use the integrated cooker, because the suction outlet of the integrated cooker is closer than the smoking opportunity, and the smoking effect is better. 2. Cleaning and firepower: whether it is a traditional range hood or an integrated cooker, cleaning is another concern of our consumers. On this point, we have to say that the integrated cooker is too convenient. The traditional range hood is difficult to disassemble and clean, and after a long time of accumulation, there will be oil leakage and oil dripping. The integrated cooker is equipped with multiple oil smoke separation, so only the removable filter screen needs to be cleaned during cleaning, which is very simple. In terms of cleaning, the integrated cooker is obviously superior to the traditional range hood.

What are the purchase items of integrated cooker? The integrated cooker's lampblack does not pass through the human face. If the quality and installation problems are eliminated, the lampblack removal rate will basically reach more than 95%, saving space, no meeting, no oil dripping, and no oil leakage. But many friends do not know how to choose. What are the options for the integrated cooker in 2020? The first choice of purchasing items for integrated stoves is to choose brands, which is a commitment. It expresses the history, scale, production capacity and user reputation of an enterprise. Whether an enterprise has the concept of "altruism" is related to whether it will consider more for our consumers. And good after-sales service is also an important guarantee for us to purchase products. First, look at the process. The process level of the product can best prove the quality management ability of an enterprise. The process should be seen in detail. Take the range hood for example, is there any defect on the panel surface? Are the corners smooth? Are keys, seams and screws handled perfectly? These best reflect the quality level of a product. (1) The most important technical parameters of suction integrated environmental cooker in terms of suction are air volume and air pressure. Air volume: Generally speaking, the larger the air volume is, the faster and timely the kitchen smoke can be exhausted. Under rated voltage and frequency, the integrated environmental cooker operates at the highest speed. In a specific test device, when the static pressure is zero, the corresponding exhaust air volume is not less than 21 square meters/min. Wind pressure: the greater the wind pressure value, the stronger the anti backdraft ability of the integrated environmental protection stove. The air pressure is an important indicator to measure the performance of integrated environmental cooker. If the exhaust pipe is long or connected to the public flue, due to the great loss of exhaust pressure, a larger air pressure is required to ensure the exhaust of flue gas. (2) The most important technical parameter of the environmental protection integrated environmental protection stove in environmental protection is the odor reduction degree. Odor reduction degree: under the specified test conditions, the ratio of the difference between the maximum odor concentration of the laboratory and the maximum odor concentration of the integrated environmental protection stove under working conditions to the maximum odor concentration of the laboratory. The higher the value, the better, which means better smoke exhaust effect. Experts suggest that a large number of thermal oxidation decomposition products will be produced after a series of complex changes of edible oil and food in the kitchen under high temperature conditions, some of which will be emitted into the air in the form of smoke to form kitchen smoke. The composition of lampblack gas is complex: there are more than 220 kinds of aldehydes, ketones, fatty acids, alcohols, aromatic fat compounds, lipids, lactones, heterocyclic compounds, etc., most of which are toxic. Therefore, in addition to paying attention to the suction, the odor reduction is also an extremely important reference when purchasing an integrated environmental cooker: it is a trial run on site, and you must operate it on your own site under the guidance of the manufacturer's purchasing guide. Open the prototype, feel the air volume and suction with your hands, and feel them at different heights; Listen to the noise. The key is whether there is noise. Noise is an important indicator to measure the performance of integrated environmental protection cooker. It refers to the A-sound power level measured by the specified method when the integrated environmental protection cooker operates at the highest speed under rated voltage and frequency. The national standard stipulates that the indicator value is not more than 74dB

How to select integrated stoves? The integrated cooker integrates the functions of range hood, cooker, disinfection cabinet, storage cabinet, etc. It has the characteristics of high smoke absorption rate, energy conservation and environmental protection, ultra quiet and intuitive display, saving space, costs and human operation procedures. How to select integrated stoves? How to guarantee the quality? Selection method of integrated cooker 1. Whether there is an automatic flameout protection device; 2. Whether it is convenient for maintenance and cleaning, or cleaning links can be reduced; 3. Whether the internal structure is scientific and advanced; 4. Energy saving, high thermal efficiency, power saving, environmental protection and practicality; 5. To have excellent workmanship, durable materials, beautiful and fashionable; 6. What are the major innovations and practical functional advantages; 7. The quality is guaranteed, the goods are compared, and the goods are genuine at a reasonable price; 8. Whether the after-sales service is perfect;

What are the advantages of the integrated cooker? Integrated cooker is a kitchen appliance that integrates multiple functions such as range hood, gas cooker, disinfection cabinet and storage cabinet. It is also called environmental protection cooker or integrated environmental protection cooker in the industry. What are the advantages of integrated cooker? Why is integrated cooker popular? Advantages of integrated cooker 1. Integrated innovative design integrates the functions of range hood, gas cooker, disinfection cabinet, storage cabinet, microcrystalline cooker, induction cooker, etc., with unique combined and efficient smoke absorption effect, to maximize the use efficiency of various functions, and fully automatic intelligent control, Realizing the requirements of people's pursuit of green and environment-friendly high-end kitchen appliances. The traditional kitchen appliances are based on the traditional concept and traditional design, which can not compete with the integrated stove in function combination and innovation. 2. The ultra-high oil smoke extraction rate of the integrated stove is more than 95%. The innovative application of micro aerodynamics principle has made a two-way isolation between the pollution source and the external environment, which can effectively eliminate the oil smoke and steam before diffusion without affecting the operating line of sight and without passing through the human respiratory pathway. Even fried peppers can not smell a bit of cooking, Give you a clean kitchen environment. However, the traditional kitchen equipment has a long space circulation distance of lampblack, and the lampblack diffuses seriously. In the process of rising, most of the lampblack diffuses into the room, becoming lampblack and heat, leading to the kitchen walls and items filled with oil dirt. The kitchen hygiene has become a tedious task, and the kitchen temperature rises, so entering the kitchen cannot be a pleasure. 3. The real low noise exhaust design eliminates the noise source placed on the head of the human body, and applies ultra-low, noise technology and silent air duct design technology to reduce noise. Relatively speaking, the traditional kitchen range hood works in the position of human auditory organs, with high noise. Long term operation in the kitchen is likely to cause human upset, dizziness, tinnitus and dizziness. 4. Intelligent control of modern control system organically combines gas stove, range hood, disinfection cabinet, etc. according to people's common use mode, and microcomputer control is simple and convenient. In traditional manual operation, the range hood is located on the head of the human body, so it is easy to touch the head when operating. It is easy to drip and leak oil after a long time. Cleaning is frequent and inconvenient. 5. Space saving, resource saving and environmental protection cooker N is integrated with the lower row design, eliminating the space of the traditional wall mounted range hood above. The environmental protection cooker and kitchen cabinet are integrated, and the installation decoration is highly free, providing more space for the island style and open modern kitchen. The design of free flip also gives consumers more choices. The traditional design of hanging range hood occupies the upper space of the kitchen. In order to protect the indoor environment, the kitchen must be isolated, and the space utilization rate is small. Currently, most kitchens are designed as male tables, and the installation is greatly limited. 6. The healthy and pollution-free traditional range hood has a serious spread of oil smoke, rising everywhere, burning smoke, polluting the indoor air. Frequent contact will lead to facial skin oil, large pores, dark and so on. Excessive inhalation will lead to obesity, slow reaction, "drunken oil syndrome", and even lung cancer, nasal cancer and so on. Due to the upward suction design, the heat rises, especially in summer when you have to work in a hot environment. The kitchen work under such environment for a long time has become the enemy of human health. 7. Safety performance upgrading: flameout automatically cuts off the air source, electric leakage automatically cuts off the power supply, automatically detects air leakage, voltage and current overload detection, timing reminder function and other safety devices, which can play a role in safety protection during use and improve the safety guarantee coefficient. Ordinary stoves are easy to turn over and cause accidents if they are used carelessly. The elderly and children are more dangerous to use, and the safety protection function is poor. Once the gas leaks, the consequences are unimaginable. 8. The green environmental protection adopts the side suction and bottom exhaust technology, and the smoking effect is more than 95%. There is no smoke feeling in cooking, even the steam will not spread, and the room will not cause oil smoke pollution, so it has the effect of environmental protection. Compared with integrated stoves, traditional kitchen appliances still have a big gap in terms of oil smoke absorption and other aspects. It is difficult to avoid the existence of a small amount of oil smoke pollution in the kitchen.

Is the function of disinfection cabinet great? When it comes to the practicability of disinfection cabinet, many people will think of cupboard. Because disinfection cabinet can not only sterilize tableware with high temperature and ultraviolet ray, but also store tableware. Kang. However, many friends think that the efficacy of the disinfection cabinet is not very great, so what is the role of the disinfection cabinet? Is the function of disinfection cabinet great? First, the kitchen can be said to be the place where bacteria are most likely to grow in the whole family. For example, there will be bacteria growing in cabinets, chopsticks cages, chopping boards, sinks, etc., and the invasion of these bacteria should not be underestimated. It's also true that diseases come from the mouth. You want to know how healthy you can be if you use more dishes and chopsticks full of bacteria. Second, disinfection is very thorough. The common household disinfection cabinet mainly has three disinfection methods: high-temperature disinfection, ultraviolet disinfection and ozone disinfection. High temperature makes bacteria unable to survive, and ultraviolet sterilization makes dishes and chopsticks more hygienic. Third, it has many functions. Disinfection cabinet has the function of keeping fresh and cleaning. The fruit will not change color after being washed in the disinfection cabinet for a long time, and the residual pesticide can also be removed. The frozen meat can not only be kept fresh but also thawed when placed in the disinfection cabinet. Precautions for installation of disinfection cabinet 1. The disinfection cabinet should be stably installed at a place convenient for operation and maintenance and firm. It should not be installed obliquely. It should be kept at a safe distance of more than 15cm from gas appliances and high temperature open fire. 2. When carrying, it should be lifted from the body clasp or the bottom of the body and handled gently. It is not allowed to move the disinfection cabinet by dragging the cabinet door or handle directly. 3. It is forbidden to install the disinfection cabinet and power socket in places that may be damp or easily wet by water. The power socket must be reliably grounded.