Haosheng Ceramics

Lightweight partition board is a new type of energy-saving and environmental protection wall material, which is widely used in new green energy-saving building internal partition walls at present. This product has a wide range of uses, excellent performance, easy installation and operation, broad market prospects, simple and convenient construction, reduced labor intensity, accelerated construction progress, and saved the total cost of the project. It has become a rising star in the building materials industry. But what puzzles us is, what are the differences between such new wallboard and ordinary wallboard? Next, we will introduce the difference between lightweight partition board and ordinary partition board: high-quality lightweight partition board: mechanized production, strict quality and technical control, on-site assembly, and stable quality; Ordinary wallboard: in the field construction, according to the different technical standards of the constructors, each construction can not be completely the same, the quality is difficult to require, the precision of the field construction is also poor, and the number of rework and maintenance is more; On site management of light partition board: the process quality of products is to match, produce and assemble in the factory to ensure the construction quality; Ordinary wallboard: the process quality of various products processed on site, the items to be managed, and the on-site management are difficult to be in place; Environmental friendly lightweight partition board: 1. Environmental protection of materials: in line with the National Quality Standard for Building Materials; 2. Environmental protection of construction: only assembly on site, no noise; 3. No dust pollution, economic benefits up to Class A fireproof material, no pungent smell, move in; Ordinary wallboard: the quality of materials is not easy to control, and combustible and flammable decoration materials are used in large quantities to stimulate the smell of the site after decoration, so it is difficult to move in immediately; Economic benefits Light partition board: reusable, saving the cost of enterprise relocation and renovation; Ordinary wallboard: no such advantage; Light partition board for line layout: telephone line, network line, wire, cable can be built in, which is convenient for maintenance and flexible to increase, avoiding damage caused by exposed lines; Ordinary wallboard: embedded in advance, but cannot be inspected and repaired in the future; Design lightweight partition board: there are many choices of specifications and styles; Ordinary wallboard: the design can be rich, but its manual work and paint can not be consistent; Space flexibility Lightweight partition board: 100% space flexibility can be achieved; Ordinary wallboard: impossible. The above content clearly explains the advantages of Haopan energy-saving light partition board. Through comparison in all aspects, Haopan energy-saving light partition board is better than ordinary wall board, and it is a truly new energy-saving and environmental protection wall. With the steady progress of China's national development strategy, the accelerating socio-economic development and the gradual improvement of energy-saving industries, Haopan energy-saving lightweight partition panels can provide strong support for energy-saving and environment-friendly buildings. While the products are excellent, the development of the enterprise also keeps pace with the times, increases technology investment and improves the level of science and technology, striving to be the leader of China's energy conservation and environmental protection cause. The article was edited by Haopan Energy Conservation, please do not reprint! Netizen comments

Qingdao Runhao fluorocarbon has various varieties, superior performance, good quality, safety and environmental protection. In addition, consumers pay more attention to environmental protection, health and personality. So Qingdao Runhao fluorocarbon is very popular. The quality gap of Qingdao Runhao fluorocarbon on the market is relatively large, and the advantages and disadvantages coexist. Therefore, how to distinguish Qingdao Runhao fluorocarbon becomes particularly important. I hope this article can help you and avoid detours. 1、 What kind of paint can be sprayed on the aluminum alloy surface Fluorocarbon coating process on the aluminum profile is mainly divided into six steps: pre treatment - primer coating - finish paint layer - finishing paint layer - curing treatment - quality inspection 1. Before the aluminum alloy profile is sprayed, the workpiece surface should be degreased, decontaminated and chemically treated to produce a chromizing film, increase the adhesion and oxidation resistance between the coating and the metal surface, It is conducive to prolonging the service life of the paint film. 2. Primer coating: as a primer coating for sealing the substrate, its role is to improve the permeability resistance of the coating, enhance the protection of the substrate, stabilize the metal surface layer, strengthen the adhesion between the finish paint and the metal surface, which can ensure the color uniformity of the finish paint coating. The thickness of the paint layer is generally 5-10 microns. 3. Finish coating: finish coating is a key layer of the spraying layer, Protect the metal surface from the corrosion of the ambient atmosphere, acid rain and pollution, and prevent the penetration of ultraviolet rays. The purpose is to provide the decorative color required by aluminum, make the appearance of aluminum meet the design requirements, and greatly enhance the anti-aging ability. The finishing coat is the thickest paint layer in spraying, and the thickness of the paint layer is generally 23-30 microns. 4 Finish coat: the main purpose is to more effectively enhance the resistance of the paint layer to external corrosion, protect the finish coat, increase the metallic luster of the finish coat color, make the appearance more bright and dazzling, and the coating thickness is generally 5-10 microns. The total thickness of the three spraying layers is generally 40-60 microns, which can be thickened if special needs. The finish coat is also called varnish coating. 5 Curing treatment: the three spray coating generally needs secondary curing. The aluminum materials are treated in the curing furnace. The curing time is 15-25 minutes, and the curing temperature is generally between 180 ℃ and 250 ℃. Different fluorocarbon coating manufacturers will provide the best temperature and time according to their own coatings. Some chlorocarbon spraying plants (curium oil plants) also change the two curing of the three spray coating to one curing according to their own experience. 6 Quality inspection: the quality inspection shall be in accordance with AAMA-605.02.90 standard. Only strict quality inspection can ensure high-quality spraying products. 2、 What are the top ten fluorocarbon paint brands in China? 1. Dulux (British ICI Group's world brand, national inspection free product, top ten brand paint) 2. Huarun (China's famous trademark, China's famous brand, national inspection free product, top ten brand paint) 3. Nippon (China's famous trademark, national inspection free product, top ten brand paint) 4 Fickett ICTOR (China's famous trademark, China's top ten paint brands, industry inspection free products, and endorsement of movie stars) 5. Carpoly (China's famous trademark, China's famous brand, national inspection free products, and top ten brand paint) 6. Dabao Taiho (national inspection free products, top ten brand paint, Guangdong famous brands, and Asian famous brands) 7 Sankeshu (China's famous trademark, China's famous brand, national inspection free product, top ten brand paint) 8. Bauhinia (China's famous brand, top ten brand paint, Hong Kong in 1982) 9. Giraffe chrysanthemum (China's famous brand under China Paint, top ten brand paint, Guangdong famous brand) 10. Puer paint (China's famous trademark, China's top ten paint brands, industry inspection free products, China's famous brand) 3 Related concept 1. Paint coating is a viscous liquid that is coated on the surface of protected or decorated objects and can form a continuous film firmly attached to the coated objects. It is usually made of resin, oil, or emulsion, with or without pigments, fillers, and corresponding additives, and is prepared with organic solvent or water. The more authoritative book "Coating Technology" in the Chinese coating industry defines as: "coating is a kind of material, which can be coated on the surface of objects with different construction processes to form a solid film with firm adhesion, certain strength and continuity. The film formed by this is commonly called coating film, also known as paint film or coating." In the early days, most of the coatings used vegetable oil as the main raw material, So it is called "paint". Both traditional coating products with natural materials as raw materials and modern developing coating products with synthetic chemical products as raw materials belong to organic chemical polymer materials, and the film formed belongs to the type of polymer compounds. According to the classification of modern chemical products, coatings belong to fine chemical products. 2. Fluorocarbon paint Fluorocarbon paint, also known as fluorocarbon paint, fluororesin paint, etc., refers to the paint with fluororesin as the main film-forming material. Among all kinds of coatings, fluororesin coatings have excellent properties, such as weather resistance, heat resistance, low temperature resistance, chemical resistance, and unique non adhesion and low friction due to the large electronegativity of introduced fluorine element and strong carbon fluorine bond energy. It has become the coating brand with the highest comprehensive performance after high-performance coatings such as acrylic coatings, polyurethane coatings and silicone coatings. After decades of rapid development, fluoro coatings have been widely used in various fields such as construction, chemical industry, electrical and electronic industry, machinery industry, aerospace industry and household goods. At present, the widely used fluororesin coatings mainly include PTFE, PVDF and PEVE. It should be noted that fluorocarbon paint should be placed in a dry, waterproof, leak proof, sun proof, high temperature proof, and away from ignition sources. 3. Resin resin usually refers to the organic polymer that has softening or melting range after being heated, and tends to flow under external force when softening. It is solid, semi-solid, and sometimes liquid at room temperature. Broadly speaking, any polymer compound that can be used as raw material for plastic products processing is called resin. Related recommendations Fluorocarbon paint can brush wood, but not China's top ten brands of water paint Fluorocarbon paint_Fluorocarbon paint price Technical requirements (technical standards) _ppg Fluorocarbon paint metal paint and ordinary paint, which is good for fluorocarbon paint peeling? How much is fluorocarbon paint per square meter Nippon fluorocarbon paint color mixing

Top Ten Brands in the Ceramic Industry of the Year? Now many friends pay great attention to the materials of articles when decorating. Ceramics are very popular in decoration. User friends should also pay attention to the brand when shopping. There are few problems with the brand, and the quality is guaranteed. What are the top ten brands in the ceramic industry in the year? Dongpeng Ceramics Guangdong Dongpeng Ceramics Co., Ltd. is located in Shiwan, Foshan, the famous hometown of ceramics in China. Adhering to the core concept of "working together and building a career with integrity", it specializes in the production of floor tiles, wall tiles, industrial tiles and sanitary products. It is one of the professional manufacturers with large scale, complete varieties and specifications and good reputation in China. The enterprise has passed ISO9001 management system certification, ISO14001 environmental system certification, product quality "3C" certification, China environmental label certification, etc. It has been successively rated as "China's Famous Trademark", "Self owned Brand Enterprise with More Growth Power in China's Manufacturing Industry", "China's 500 More Valuable Brands", "China's Building Ceramic Industry's Iconic Brand", "Guangdong Province's Iconic Brand", "Guangdong Province's Famous Trademark", "Guangdong Province's High tech Enterprise", "Guangdong Province's Patent Pilot Enterprise" "Top 100 Private Enterprises in Guangdong Province", etc. 2、 Guanzhu Ceramics Guanzhu Ceramics is a brand that Xinmingzhu Ceramics Group, a pioneer in China's ceramic industry chain, has spent 21 years building and is deeply loved by consumers. It has maintained rapid and steady development for 21 consecutive years, has strong comprehensive strength and outstanding competitive advantages, and is one of the brands with super market competitiveness in the construction ceramics industry. The New Pearl Ceramic Group was founded in 1993 with a registered capital of 800 million yuan, and has developed into a modern enterprise group specializing in the production of ceramic tiles and sanitary wares. At present, it has five production bases, three industrial parks and more than 22000 employees, forming a large-scale advantage of more than 60 production lines and an annual production capacity of more than 200 million square meters. It has more than 5000 distribution outlets and more than 20000 specialty stores worldwide. Attracted by the charm of Guanzhu ceramics, consumers who use Guanzhu products to pave beautiful home life are growing at the rate of 2 million families every year. 3、 New Zhongyuan Guangdong New Zhongyuan Ceramics Co., Ltd. (hereinafter referred to as "New Zhongyuan Ceramics") is a well-known building ceramics enterprise integrating scientific research, production and sales. Its marketing headquarters is located in Nanzhuang Town, Foshan City, "the front town of China Building Ceramics". New Zhongyuan Ceramics, integrating many honors such as "China's environmental protection products and Guangdong famous trademarks", was identified by Guangdong Provincial People's Government as one of the 13 world brand enterprises in the province. New Zhongyuan Ceramics has ten large-scale modern ceramic production plants, which are located in Sanshui, Shunde, Heyuan, Qingyuan, Jiajiang, Sichuan, Gao'an, Jiangxi, Hengyang, Hubei, Dangyang, Shenyang Faku and Hebi, Henan. Its capacity scale ranks the top in the world, and it is known as the "building ceramics aircraft carrier" in the industry. New Zhongyuan has a comprehensive and rich ceramic product line. It produces and sells polished tiles, antique tiles, full polish glaze, microcrystalline stone, gold makeup tiles, porcelain chips, thin plates, sanitary ware and other categories. It has more than 1000 domestic sales outlets, and overseas marketing networks covering more than 120 countries and regions. It is one of the construction ceramics enterprises with large export volume in China at present. 4、 Xinruncheng Ceramics Guangdong Xinruncheng Ceramics Co., Ltd., headquartered in Foshan, Guangdong, adjacent to Xiqiao Mountain, one of the "four famous mountains in Guangdong", is one of the largest modern enterprises specializing in the production of ceramic wall and floor tiles in China. It has two large modern production bases in Foshan, Guangdong, with a total plant area of nearly 500000 square meters and marketing outlets all over the country. The company has introduced Italian advanced automatic production line, SACMI (Sacmi) press, high-definition inkjet printer, national advanced long roller kiln and other first-class equipment to produce 600mm? 00mm to 1200mm? More than 300 varieties of ceramic products with different specifications, such as 200 mm, are available in nine categories, namely, high crystal stone, diamond, marble tile, microcrystalline, full glazed, polished tile, glazed interior wall tile, porcelain wood floor and antique tile. The product series is professional and diversified. The annual output of ceramic wall and floor tiles is more than 30 million square meters, and the products are exported to more than 30 countries and regions around the world Huiya Ceramics Guangdong Huiya Ceramics Co., Ltd. is a new modern large-scale enterprise. The company covers an area of more than 1000 mu, with a total investment of more than 500 million yuan, advanced equipment and strong technical force. It has introduced a full set of Italian 7200 ton automatic brick presses and many domestic first-class large tonnage presses; It has many advanced roller kiln production lines and wall and floor tile production lines at home and abroad, its own independent research and development department and hundreds of professional and technical personnel, and has strong independent research and development capabilities. The series of new products such as "Empowering the Country" and "Love for Love" developed by itself have made a good response in the industry and society, At the same time, the company has employed many domestic and foreign ceramic production experts as technical consultants, and has established extensive and close cooperation with many domestic and foreign ceramic technology companies. 6、 Gold Medal Ceramics Co., Ltd. has a strong scale and strength, with a production base area of 730 mu. The company has introduced world-class modern ceramic production equipment, equipped with several Italian 7200T large tonnage presses, 6 lines of the industry's more advanced 330 meter long automatic wide body gas roller kiln, with a daily output of 9000 square meters of polished tiles and 13000 square meters of glazed wall and floor tiles. At the same time, the company has a strong product R&D innovation system. The R&D center with an initial investment of more than 8 million yuan has been put into use. It is equipped with various world advanced ceramic process pilot equipment, and has formed a research and development experimental center that integrates design, development, trial production, and testing, ranking the leading level in the domestic industry. As the company's main brand - award-winning Asian ceramics, the product structure is complete, the product design is complete, and the style is rich. 7、 Huapeng Ceramics, located in three major production bases, is based on Foshan's talent and technical resources, integrating Heyuan's raw materials and environmental resources, with an annual production capacity of more than 30 million square meters. Synchronize with the international advanced production line, 76 production inspection processes and 1230 ℃ 60 minute high temperature slow burning standard to ensure the excellent quality of Huapeng products. Huapeng Ceramics R&D team, composed of 92 top technical experts in the industry, is experienced and innovative, and has developed a series of industry-leading products, such as: once fired microcrystalline jade, 29? The soft light stone, three side four color ultra white brick series, etc., once launched, have had a strong response in the market. Among them, 29? Soft stone is selected by Italian Armani store for its unique surface effect. 8、 In 2007, Mohawk Industrial Group (MOHAWK), a Fortune 500 enterprise in the United States, jointly invested in the establishment of Garcia Tiles, sharing its Tatai Tiles and Marazzi Tiles in 38 international research centers, 15 major production design processes and R&D systems in the United States, Italy, Russia, Spain and other countries. The headquarter production base is located in Garcia Ceramic in Foshan, Guangdong, with a total investment of 1 billion yuan. There are 11 production lines and its own private wharf. At present, the products cover diamond glaze? More than 100 series of magic stone, diamond glaze II, full polish glaze, polished tile, interior wall tile, wood grain tile, etc. Excellent product quality, forward-looking strategic guidance 9. Ouwenlai Ouwenlai, focusing on "plain modern bricks"! Guangdong Ouwenlai Ceramics Co., Ltd., founded in 1999 and located in Foshan, is a large ceramic tile enterprise integrating design, research and development, manufacturing and marketing, which is committed to providing consumers with simple, fashionable and high-grade "plain modern bricks". "Plain modern tiles" - the international trend of modern tiles! It abandons complexity, luxury and fancy. It is different from other colorful tiles. Its color is mainly black, white and gray. Its texture emphasizes the integration of natural and fashionable elements. It is characterized by large specifications. Its application space is more simple, bright, comfortable, and intellectually simple. It has become the mainstream trend of ceramic tile consumption. Oubrunei has two R&D and manufacturing bases with a total investment of 1.1 billion yuan, and works with Tecnografica Newton and DigitalDesign have established long-term strategic cooperation. Relying on advanced manufacturing technology and independent research and development capabilities, they have obtained 29 international patents and 72 domestic patents. A number of research and development achievements have been selected into the National Torch Plan X, Hengyue Ceramics and Hengyue Ceramics. Originating from the Chinese architectural ceramics aircraft carrier - New Zhongyuan Ceramics Enterprise Group, they have become a powerful family and inherited the honor. We are determined to create a simple and fashionable modern home style and create a better living space with excellent quality. Hengyue Ceramics is located in Foshan, the ceramic capital of China. It is a high-tech and professional large-scale ceramic brand integrating scientific research, production, sales and service. Adhering to the core business philosophy of "high-quality products, stylish life", Hengyue Ceramics regards innovation as the driving force and quality as life. At present, it has a modern production base of more than 2000 mu, with 7800 tons of super tonnage press, 324.3 meters of super long roller kiln and other sophisticated equipment and full-automatic production lines, to build a powerful ceramic production enterprise. With a strong R&D team, Hengyue ceramics industry is the first to promote super clean technology, full glaze secondary firing and other processes, providing strong scientific and technological support for products.

Since 2016, China's 13th Five Year Plan has been officially launched, and the country will enter a new round of development sprint. From the relevant information disclosed in the 13th Five Year Plan, the urbanization construction will be further accelerated, the transformation of old urban areas will also be vigorously promoted, and the development of the central and western regions will also enter a critical period, which will bring good development prospects to the building materials industry. However, the development trend of the ceramic industry in recent years is not ideal, and the operating efficiency of most ceramic tile agents is not ideal. As an ordinary entrepreneur, how should we deal with the market dilemma? Sublimated ceramics show you a bright way. Move ahead: see the sun through the clouds, find a target to guide the future. Now there is a declination in the construction ceramics market, which believes that the industry will enter a recession stage, and also claims that the property market will suffer a major setback, and the construction ceramics market will inevitably decline. However, from the objective needs of national policies and economic development, the ceramic industry actually has a very good prospect. But we must also see that the industry competition is fierce, and all kinds of enterprises and institutions and even ordinary people's demands for ceramic tiles are constantly increasing. In other words, businesses must have better quality and better service in order to be in a favorable position in the competition. Therefore, Shenghua Ceramics believes that we should first find a partner with significant advantages and reliable strength to point out the direction for future market competition. The second move: to win by quality, to be more skillful and not afraid of challenges. How is the quality outstanding? In fact, many ceramic dealers themselves cannot explain clearly. In my opinion, at least we should meet the market demand and conform to the development trend of the industry. Now the country has put forward great hopes for the ecological transformation and environmental upgrading of the construction ceramics industry; The public also put forward higher requirements for the health quality, design creativity, practical quality of architectural ceramics. Therefore, the partners selected by businesses must also be of excellent ecological health quality and quality. Sublimation ceramics has achieved this, which is in line with people's expectations for high-quality ceramic products. The first tier brand of ceramics has sublimated the ceramics industry for many years. The ceramics industry has always adhered to the market demand orientation. There are a large number of senior product designers, front-line technicians, and quality management personnel sitting in the town. New materials and new equipment are used in large quantities. The products do not contain formaldehyde, benzene, and other harmful substances. They are green, ecological, pollution-free, and have high hardness, high strength, friction resistance, easy cleaning, and a full range of colors It has the characteristics of aging resistance, high temperature resistance and humidity resistance, and has good adaptability to high temperature, dry, sun exposure, humidity, acid rain, haze and other conditions. The practical quality of the product has won widespread praise. Third move: optimize services, gather customers to win wealth Investors should believe that customers are God, and strive to satisfy customers with high-quality services, so as to create favorable conditions for career development. In fact, many customers are faced with the problem of poor professionalism and poor service. They do not understand the fashion home decoration style, do not know how to avoid market risks and traps, do not know how to spend less, achieve better results, and do not know how to rely on the quality of ceramic tiles... These rice cookers of customers are the breakthrough for businesses to show professionalism and attract customers. Shenghua Ceramics proposes that businesses provide good services, solve customer problems and improve business efficiency. Sublimation Ceramics, a leading brand of ceramics, will assist merchants in upgrading their services. A specially assigned person will provide training for merchants to help you discover the selling points of products, teach customer communication skills, and become familiar with the characteristics of various decorative styles, so that you can master a set of advanced service concepts and mature service models, and provide perfect sales and after-sales services for all customers. The new year has begun, and the battle for supremacy in the ceramic industry will be further upgraded. Are you going to follow the old ways and watch your luck? Or do you plan to have a journey full of miracles with powerful enterprises? Engineering ceramic tile sublimation ceramics look forward to those who are destined to travel together. (Source: chinaware. com) Netizens' comments

Can the service life of lightweight partition board be as long as 100 years? Recently, many experts and scholars have confirmed that it is true, and building materials engineers said that this is very reliable. At present, most thermal insulation materials in our country belong to organic materials, and the building life of organic materials is 20 to 25 years. Therefore, the internal thermal insulation materials of buildings using traditional thermal insulation materials generally begin to aging and weathering after 20 years of use. Therefore, thermal insulation treatment is carried out 2 to 4 times during the service period of buildings. This repeated construction method makes our buildings suffer huge losses. The light partition board is made of industrial waste slag, Portland cement, EPS, calcium silicate panel and other inorganic raw materials, so its corrosion resistance is very strong. For example, Portland cement is a hydraulic cementing material made of Portland cement clinker, 0%~5% limestone or granulated blast furnace slag, and appropriate amount of gypsum. It is called Portland cement, and it is usually called Portland cement abroad. Its building service life is more than 100 years, and the licensed cement products used for lightweight partition boards have the same performance as this cement. Therefore, not only the thermal insulation effect is good, but also the building life can last for 100 years. The article was originally published by Haopan Energy Conservation. Please specify the source! Netizen comments

1、 Light partition board is mainly used for sound insulation or fire partition. It is one of the new wall materials in China. What is its performance? 1. Not only the seismic effect is good, but also its structure is exquisite, the production technology is advanced, and it is easy to process, which changes the current situation of traditional brick wall embedding difficulties. 2. In installation, the construction process is simple and easy to operate, which greatly improves the construction efficiency and saves costs for enterprises. 3. No plastering is required for cleaning the construction site, which reduces the production of construction waste and achieves civilized construction. 2、 After entering the market, lightweight partition boards have been unanimously welcomed by people. What are the advantages compared with traditional walls? 1. Good sound insulation performance: modern buildings often use light partition boards as sound insulation walls. The sound insulation volume tested is 41dB for 90 types and 45dB for 120 types, which is 38dB higher than other 200mm thick (240mm double-sided plastering) sintered shale hollow brick walls. 2. Area saving: the thickness is thin and the weight is light, which can save a lot of space and cost. 3. Good thermal insulation effect: the lightweight partition body has an obvious role in thermal insulation, which is unmatched by traditional walls. In a word, the lightweight partition board is much superior to the traditional wall, and it is the trend of the times. 3、 How does the lightweight partition board react in the market? The lightweight partition board has the functions of easy construction, good sound insulation and heat preservation, and is welcomed by everyone. The traditional wall can no longer meet people's requirements for the living environment, and this partition board has the advantages of environmental protection, energy conservation, moisture-proof, lightweight, sound insulation, heat insulation, and so on. These functions are just what modern people need when choosing walls. In addition to these advantages, there is another important reason why people value lightweight partition boards. It is very convenient in decoration, and there is little construction waste generated during construction, which keeps the construction site clean. 4、 The application of light partition board is more and more extensive. Here is a summary of the application fields of this material: 1. The application of light partition board in energy-saving reconstruction projects is popular for its advantages of simple and fast installation, short construction time, low cost, etc. 2. Hotels, office buildings and other commercial buildings. The structures of these buildings are relatively simple and often used for internal structural adjustment. 3. Schools, hospitals and other public buildings. It is mainly used for thermal insulation, sound insulation, fire prevention, earthquake resistance, etc. There are many uses of lightweight partition board. In the near future, its use will be more and more excavated, and people will become more and more familiar with this new wall material. 5、 When buying lightweight partition boards, we all want to buy high-quality products, but how to distinguish the quality? It can be judged from the following two aspects. 1. The selection of raw materials has a direct impact on the quality of the wall. The quality of the wall can be guaranteed only by selecting appropriate materials. When purchasing, you must check the quality of raw materials. 2. Judging from the improper operation method and construction method, the quality of the light partition board produced must be poor. The construction shall be carried out in the correct order, and the incorrect construction process shall be prohibited. Judge the quality of light partition board from the above two aspects, so that you don't have to worry about buying unqualified products. The article was edited by Haopan Energy Conservation. Please indicate the source for reprinting! Netizen comments

As a new type of material, light partition board has the following characteristics: solid, thin, high strength, strong resistance, strong hanging force, heat insulation, fire prevention, waterproof, easy cutting, easy slotting, long service life, and recyclable. Compared with the traditional wall materials, the advantages of light partition walls in environmental protection and energy conservation are highlighted. The use of lightweight partition panels can increase the practical area of residential space, effectively reduce the load of space structures, and improve the seismic capacity. For the contractor or construction party, four reasons for choosing lightweight partition board 1: save the amount of reinforcement and reduce the cost of construction. The light partition board has large single area, light weight, high strength (strength comparable to concrete), excellent sound insulation, fire prevention, waterproof and thermal insulation performance, and is thinner than ordinary concrete. It can effectively reduce the dead weight of the building, reduce the use of reinforcement, and reduce the cost. 2: Convenient installation, providing work efficiency. For example, it is also a wall with an area of about 15 square meters. It is estimated that the traditional mode requires more than half a day of work, while the installation of light partition boards can be completed in about one and a half hours. 3: No plastering process is required for light partition board. Because the surface of the light partition board is flat, the plastering process can be omitted in the installation project, and the putty can be directly applied to achieve the effect of saving resources, time and environmental protection. 4: The construction period is short and the project produces less garbage. The whole construction site is a dry operation with low intensity and high speed, which greatly shortens the construction period, and the whole construction site will not produce construction waste. For construction workers, the simple installation of lightweight partition boards is what they prefer! Specification for installation process of light partition board 1. Setting out and lifting the board: snap the baseline at the installation position of the wall board perpendicular to the baseline at the bottom of the board or beam to ensure that the installed wall board is flat and straight, and one wall board can be easily handled by two people. 2. Sawing board: cut with portable machine at will according to requirements, adjust the width and length of wallboard to reduce the wallboard loss rate. 3. Grouting: use the special bonding mortar of Haopan to prepare the paste with water, and then fill it in the concave and convex grooves of the wallboard. 4. Plate installation: move the wall plate with good mortar to the assembly position and erect it, align the baseline position from top to bottom, pry the wall plate from the bottom with iron pry to make it close to the plate. 5. In place: Firmly press the wallboard to extrude the mortar from the joint, ensure the mortar is full, and temporarily fix it with a wooden wedge. 6. Calibration: use a straightedge that checks the flatness and perpendicularity of 2m: adjust and calibrate with a crowbar, and then fix it up and down with a wooden wedge and rebar. 7. Nailing: insert the steel clip into the joint between the wallboard and the top beam, and fix it with a nail gun. 8. Grouting and joints: install the corrected wallboard and fill the upper and lower joints and the joints between plates with Haopan special bonding mortar; The gap between plates shall be laid with mesh cloth and leveled with bonding mortar. 9. Grooving and embedding conduit: if it is necessary to embed concealed pipelines, switch boxes, etc., it can be installed by cutting the trunking with an impact drill or a portable electric saw. After installation, it can be leveled with mortar polymer. 10. Door frame installation: the door frame can be directly wrapped on the wall panel with plywood, anchored with iron nails and covered with decorative plate. 11. Coating: the surface coating can be applied later. If you want to paste porcelain chips, you can paste them directly on the wallboard with cement slurry without scraping, or you can paste wallpaper, wood veneer, etc. directly. Now, you can see why construction workers like lightweight partition boards! Netizen comments

The lightweight partition board is a new type of energy-saving wall material, which is like a hollow floor in appearance, but it has male and female falcons on both sides. When installing, just erect the board, and apply a small amount of caulking mortar on the male and female falcons and then assemble them together. It is composed of harmless phosphogypsum, light steel slag, fly ash and other industrial wastes, and cured by variable frequency steam pressure. The lightweight partition board has the advantages of light weight, high strength, multiple environmental protection, thermal insulation, sound insulation, breathing and humidity control, fire prevention, rapid construction, and low wall cost. The inner layer is equipped with reasonably arranged thermal insulation and sound absorption inorganic foam profiles or other thermal insulation materials. The wallboard is poured, leveled and scientifically maintained through the assembly line, with high production automation and a wide range of specifications. Advantages of lightweight partition board: 1. It is convenient to purchase, worry free, labor-saving and time-saving. 2、 No need for batch plastering, saving a lot of construction time and cost. 3、 The material loss rate is extremely low, and it can be disassembled for more than two times, without producing construction waste. 4、 The lightweight partition board can be cut and adjusted arbitrarily. 5、 The transportation cost is saved. The transportation weight of light partition board with the same area is only 1/6-1/2 of that of other materials. 6、 The construction site is clean, the construction condition is basically dry, equipped, civilized, fast and simple. Classification of light partition board: 1. According to materials, it can be divided into GRC board made of cement (glass fiber reinforced cement), gypsum material, calcium silicate material and fly ash material. 2. According to the function, it is mainly divided into sound insulation, waterproof and firewall board. For example, ceramic sound insulation fireproof board, and Matsumoto light partition board. After testing, the sound insulation of 100mm thick partition board is 46dB, and the fire rating is 4h. Professional sound insulation and fire prevention. 3. According to the installation mode, it can be divided into block partition, skeleton partition board, plate partition and movable partition. Among them, the panel partition is the bearing of the partition board itself, which is directly spliced and fixed on the partition wall of the building,. 4. According to the product structure, there are three types: hollow, with panel and without panel. 5. From the scope of application, it can be divided into: (1) most shopping malls, living rooms and hotels use polystyrene light partition boards, which are professional and practical; (2) PVC lightweight partition board is suitable for modern places with high light transmittance requirements; (3) Glass partition, movable partition and plate partition can be used in office partition and other frequently changed places; (4) Aluminum partition wall is mainly used for partition facilities of modern logistics warehouse. 6. After comparison, we can simply look at the specifications. The specifications and thickness of different types of lightweight partition boards are different. Matsumoto light partition wall widely used in the market has a normal specification of (2440/3000) * 610mm and a thickness of 50mm, 75mm, 100mm, 125mm and 150mm. With many choices and powerful functions, it is suitable for all types of internal and external partitions of buildings and is a rare energy-saving building material. Specification for installation process of light partition board: 1. Setting out and lifting the board: snap the baseline at the installation position of the wall board perpendicular to the baseline at the bottom of the board or beam to ensure that the installed wall board is flat and straight, and one wall board can be easily handled by two people. 2. Sawing board: use portable machine to cut arbitrarily according to requirements, adjust the width and length of wallboard, so as to reduce the wallboard loss rate. 3. Grouting: cement, medium sand (1:2) and construction glue are used to make a paste. First, clean water is used to brush the concave and convex grooves of the wallboard, and then polymer mortar is applied to the concave and convex grooves of the wallboard and the floor baseline. 4. Panel installation: move the wall panel with good mortar to the assembly position and erect it, align the baseline position from top to bottom, pry the wall panel from the bottom with crowbar to make it close to the panel. 5. In place: Firmly press the wallboard to extrude the mortar from the joint, ensure the mortar is full, and temporarily fix it with wooden wedges. 6. Correction: Use a straightedge that checks the flatness and perpendicularity of 2 meters: adjust and correct with a crowbar, and then fix it up and down with a wooden wedge and reinforcement. 7. Nailing: Φ 6 × 200mm rebar must be used to drive into the connection part of wallboard and wallboard at an angle of 45 ° for anchoring. 8. Fixation: after both sides of the 30 × 30mm wooden wedge are corrected, drill holes in the middle of the tenon or mortise surface with a 45 ° angle of the impact drill, and then anchor them with Φ 6 × 200mm steel bars. 9. Grouting: install the corrected wallboard, fill the upper and lower joints and the joints between boards with cement mortar (1:2) and construction glue mixed into polymer slurry, and pull out the wooden wedge to fill with mortar. 10. Grooving and embedding conduit: if it is necessary to embed concealed pipelines, switch boxes, etc., it can be installed by cutting the trunking with an impact drill or a portable electric saw. After installation, it can be leveled with mortar polymer. 11. Door frame installation: the door frame can be directly wrapped on the wallboard with plywood, anchored with iron nails and covered with decorative plate. 12. Plastering coating: the surface coating can be applied later. If you want to paste porcelain chips, you can paste them directly on the wallboard with cement slurry without scraping, or you can paste wallpaper, wood veneer, etc. directly. Netizen comments

At Bologna 2016, almost everyone was deeply impressed by the ceramic board. Nearly 100 well-known ceramic brands showed the board, and the technology of the board is becoming more and more mature, which can be used both on the wall and on the ground. The ceramic plates and thin plates that can be seen everywhere in Bologna 2016 have become the key display products of famous foreign ceramics, and the production technology of ceramic thin plates has become an important weight to measure the strength and prospects of ceramic enterprises. "No big board, no big brand" has become a description of the popularity of the industry by many industry people at home and abroad. As an industry leader, Monalisa ceramic sheet has been committed to product technology and application technology R&D and improvement since it developed China's front 1800X900X5.5mm ceramic sheet in 2007, from independent R&D and design to production, from the drafting of ceramic sheet standards to the drafting of product application technical regulations, to the introduction of atlases matching with ceramic sheets. In 2016, the first 10000 ton press in Asia was introduced to successfully develop the first 2400X1200X5.5mm super large specification ceramic plate. Standing at the height of "ecological development of the ceramic industry", Mona Lisa has been making breakthroughs, taking the lead in the industry and creating different ceramic sheets. The product technology has been comprehensively upgraded, and the channel layout has been accelerated to improve. The foreign ceramic thin plates have always remained in the production of solid color products, and cannot be polished, let alone imitation stone products. In addition to focusing on the size, light and thin of ceramic sheets, Monalisa ceramic sheets pay more attention to the decorative effect of ceramic sheets, and constantly enrich the stone and jade like designs of products, becoming the vane of international trends. Many foreign sheet enterprises are also gradually following the pattern of Chinese sheet, which has set off a "Chinese style" in Europe. In 2016, Monalisa ceramic sheet introduced the first 10000 ton press in Asia, comprehensively upgraded the production equipment and technology, added a series of cement plate ceramic sheets, as well as a number of jade and marble products, and the overall product support was more perfect, greatly promoting the development of the home decoration and engineering market. In 2017, the product specifications, colors and processes were comprehensively broken through, and a variety of cloth, wood and marble products were launched. The specifications of 2400X1200mm, 1800X900mm ceramic thin plate and 1200X600mm ceramic thin brick were complete, meeting different engineering needs and further improving competitiveness. What has changed is not only the specifications, but more possibilities. In 2016, Monalisa ceramic thin plates strengthened the national channel layout, vigorously explored the blank market and accelerated the construction of terminal exhibition halls. More than 20 terminal exhibition halls were newly built or upgraded throughout the year, comprehensively helping terminals to expand the home decoration retail market. In 2016, some stores in the terminal showed the dual core drive of panel green house. The engineering market has achieved fruitful results. Because of China's great consumption potential, many foreign sheet manufacturers have regarded China as the key international market to explore and used sheet as the "stepping stone" to enter the Chinese market. However, as ceramic thin plates are "new things" in China and are not recognized by the public, it is difficult to promote them in the domestic market. For this reason, in addition to participating in the formulation of relevant standards at home and abroad, Mona Lisa also put forward the concept of "technical marketing", changed the simple selling of products to providing customers with integrated solutions, guided customers to apply ceramic sheet products, and thus created a new situation for the development of ceramic sheet products. The provision of integrated solutions for ceramic thin plates forms a closed loop from marketing to service to after-sales, which is conducive to the promotion of ceramic thin plates in the blank market, and also brings considerable sales for Mona Lisa. In the context of the country's promotion of the "Belt and Road Initiative", Mona Lisa sheet has achieved cooperation with Laos, Cambodia, Malaysia and other places in several major projects, comprehensively solving the design, application and construction schemes of indoor and outdoor floor decoration, high-end office decoration, high-end home decoration and other engineering projects, so that ceramic sheet and technology can go global. Ceramic thin plate solution system In 2016, Monalisa ceramic thin plate insisted on deepening the technical marketing strategy and continued to develop the engineering market. Greenhouse Jianke strengthened the research and development support of ceramic sheet application technology, continued to output professional drawing design and technical services, and helped dealers across the country tackle engineering projects in various fields. According to incomplete statistics, there were more than 150 new projects for Monalisa ceramic sheet landmark projects in 2016, including more than 30 large-scale projects with a total supply area of more than 10000 square meters. Ceramic sheet has achieved multiple frontiers in the construction industry in the engineering market, including hospitals, subways, tunnels, real estate, building curtain walls and other fields. High standard professional promotion, covering a wide range of fields The Mona Lisa ceramic sheet market promotion activity in 2016 is a trinity of professional exhibitions, promotion activities, and media launch, covering building, interior, curtain wall, real estate, hotels, hospitals and other industries through multiple channels. The headquarters has participated in more than 10 large-scale professional exhibitions independently or jointly with dealers to enhance the popularity and influence of Mona Lisa ceramic sheet in the industry platform. Under the promotion and support of the headquarters, each marketing center actively carried out various forms of promotional activities. More than 100 regional promotional activities were held throughout the year. Cooperating with the propaganda and promotion of the industry's authoritative media and new Internet media, it laid a solid foundation for the development of Mona Lisa ceramic sheets in regional market retail and engineering projects. The thin plate can flush the inferior gas!

Monalisa ceramic sheet has been promoting the popularization and development of ceramic sheet in the domestic market since it was launched in 2007. After ten years of development, ceramic sheet has become the industry development trend favored by domestic and foreign manufacturers and recognized by consumers. A new inflection point of the industry with "ceramic sheet" as the main product has arrived. Facing the opportunities of rapid market growth and the increasingly competitive environment, what strategic measures will be taken to improve the competitiveness of Monalisa ceramic sheet, and how to maintain the leading position in the industry? We may find answers to these questions at the 2017 National Distributor Marketing Summit of Mona Lisa Ceramic Sheet. To promote standardization of technical marketing and enhance the competitiveness of brand service, "technical marketing" has always been the development strategy of Monalisa ceramic sheet. With technical services as the core, it cultivates and popularizes the sheet market and guides consumption. Through the implementation of the "technical marketing" strategy over the years, The PR promotion and project service of Monalisa ceramic sheet in the engineering market have formed a mature technical marketing system. Mr. Meng Zhengqiang, General Manager of the Plate Business Department of Monalisa Group, pointed out at the marketing summit that in 2017, the Monalisa ceramic sheet will adhere to deepening the technical marketing strategy, form a standardized and standardized operation mode of technical marketing, and implement it in the national and regional markets to establish the core competitiveness of the Monalisa ceramic sheet, and establish a more specific, more image, more intuitive More professional brand image, form and follow up brand differentiation, so as to drive the dual core market of "retail engineering" and help the development of ceramic thin plates. Strengthen the development of retail channels. After ten years of deep channel cultivation, the "retail project" dual core interaction, the Mona Lisa ceramic sheet has established the influence of industry leaders in the engineering market, and has been selected by many landmark buildings throughout the country. Compared with the engineering channel, there is still huge potential space for the development of Mona Lisa ceramic sheet in the retail channel. How to strengthen the development of retail channels and form an omni channel development of "retail project" has also become an important issue in the next stage of development of Mona Lisa ceramic sheet. Deng Qitang, the director and vice president of marketing of Monalisa Group, repeatedly stressed at the meeting that all marketing centers across the country must strengthen the construction of terminal experience halls, take the headquarters "standardized template exhibition halls of terminal retail stores and engineering product exhibition centers" as the template, establish terminal exhibition halls that attach importance to consumer experience throughout the country, and promote the rapid development of home decoration retail. President Deng said that one of the important tasks of the next stage of Mona Lisa ceramic sheet is to pay close attention to terminal construction, including the construction and upgrading of terminal experience hall, terminal service team and other aspects, to comprehensively improve terminal competitiveness and accelerate the development of omni channel market. Dual upgrading of technical products and improving product competitiveness are the foundation of Monalisa ceramic sheet. Monalisa Group has always kept the production and research and development of products in step with the world level. Since its launch in 2007, it has become popular throughout the country with the product characteristics of "large, thin, light and hard", and its 1800 × 900 × 5.5mm product specification is superior to its peers. In 2016, Monalisa ceramic sheet first created 2400 × 1200 × 5.5mm super large specification ceramic sheet. From large to larger, Monalisa ceramic sheet has refreshed the industry height of "Made in China" and "Created in China", and has repeatedly interpreted the product standard definition of "ceramic sheet is more than thin". At this marketing summit, Pan Limin, chief engineer and general manager of the R&D center of Monalisa Group, explained the direction of product R&D in 2017 to dealers all over the country. President Pan said that the group headquarters will improve production technology and process and improve product quality by introducing world advanced production equipment. At the same time, we will continue to improve the product structure. At present, we have completed 1800 × 900mm ceramic thin plates, 2400 × 1200mm super stone ceramic large plates, and 1200 × 600mm ceramic thin tiles to meet the needs of different engineering decoration. In the future, Mona Lisa will continue to strengthen the development of product designs on the basis of three specifications to provide users with more complete product choices. The new inflection point of the industry has arrived. Under the general environment that more and more enterprises in the industry are beginning to set foot in the field of ceramic sheet, Monalisa ceramic sheet is ready to build core competitiveness with "technical marketing" and meet future challenges and opportunities! The thin plate can flush the inferior gas!