Corrosion resistance: the ability of metal materials to resist the corrosive damage of surrounding media is called corrosion resistance.By the composition of the materialChemical properties, organizational form, etc.Adding chromium, nickel, aluminum and titanium that can form protective film into steel;changeelectrode potential The corrosion resistance can be improved by improving the intergranular corrosion of copper, titanium, niobium, etc.
Chinese name
Corrosion resistance
Foreign name
corrosion-proof
Definition
Ability of metal materials to resist damage of surrounding media
determinant
Composition, chemical properties and microstructure of materials
Objective To study the corrosion resistance of zinc nickel alloy coating.Method passedOrthogonal test methodThe zinc nickel alloy electroplating process was optimized to obtain the bath formula.adoptNeutral salt spray testThe corrosion resistance of the optimized zinc nickel alloy coating was evaluated and compared with that of zinc coating and cadmium coating.The effects of main salt, complexing agent, pH value, current density and temperature on the corrosion resistance of the coating were analyzed.Results The optimal formula was: zinc oxide 6~14 g/L, nickel sulfate 20~30 g/L, sodium hydroxide 100~140 g/L, brightener 4~6 g/L, complexing agent 50~70 g/L.The white rust time of the zinc nickel alloy coating obtained by this formula can reach more than 720 h in neutral salt spray test.Conclusion The corrosion resistance of Zn Ni alloy coating is better than that of zinc coating and cadmium coating.[1]
Chemical corrosion
Announce
edit
Chemical corrosion is the result of direct chemical interaction between metal and surrounding media.It includes gas corrosion and metal corrosionNon electrolyteThere are two forms of corrosion in.Its characteristics are: no current is generated during corrosion;andcorrosion products Deposited on the metal surface.[1]
electrochemistry
Announce
edit
Metal and acid, alkali, salt, etcelectrolyte solutionCorrosion caused by the action of contact is calledelectrochemical corrosion 。It is characterized by current generation during corrosion, and its corrosion products (rust) are not covered on the metal surface as anode, but at a certain distance from the anode metal[1]
General corrosion
Announce
edit
This corrosion is evenly distributed on the internal and external surfaces of the whole metal, making the section continuously reduce, and finally damaging the stressed parts[1]
Intergranular corrosion
Announce
edit
This kind of corrosion is carried out inside the metal along the grain edge, which usually does not cause any change in the metal shape, and often causes sudden damage to equipment or parts.[1]
Pitting corrosion
Announce
edit
This kind of corrosion is concentrated in the small area of the metal surface, develops rapidly to the depth, and finally penetrates the metal, which is a more harmful corrosion damage[1]
Stress corrosion
Announce
edit
It refers to the destruction of metal in corrosive medium under the action of static stress (internal and external stress of metal).This kind of corrosion generally passes through grains, which is called transgranular corrosion[1]
corrosion fatigue
Announce
edit
It refers to the destruction of metal in corrosive medium under the action of alternating stress.It is also a kind of transgranular corrosion[1]
corrosion rate
Announce
edit
The weight loss of metallic materials per unit area after corrosion in unit time is called corrosion rate[1]
Corrosion rate
Announce
edit
The depth of metal material corroded in unit time is called corrosion rate[1]
Corrosion resistance
Announce
edit
Common use of steel, especially sheet metalsurface treatment: When chromium is added, the surface will be very bright. Hexavalent chromium is not allowed. It is generally used as the coating of exposed metal parts. It is beautiful to add nickel to prevent corrosion. It is used with chromium. Generally, zinc is added as a percentage, including Fe//Zn8 zinc coating and Fe//ZnFe (2) 8 zinc iron coating. After plating, thick passivation Disp can be selected. Hexavalent chromium is not allowedElectrophoretic paint, E-Coat, which is relatively cheap and has good corrosion resistance, is easy to fall off in pieces after abrasion.Blackening, soaking in black liquor, this method is the simplest, the cheapest, the worst anti-corrosion effect, Dacromet, expensive, complex process, very good anti-corrosion performance, Delta seal (+Delta Tone), expensive, complex process, very good anti-corrosion performance, Dacromet is often used instead in China, if the requirements are reduced, galvanized is often used.[1]