KoPa electronic eyepiece The image under the microscope can be transmitted to the computer through USB cable for real-time display, and the frozen image, video recording, measuring length, angle, radian, rectangular area and perimeter, irregular figure area and perimeter, cell counting, color segmentation, pseudo color restoration, virtual 3D, image edge recognition Fourier transformation Light spot measurement and some PS image processing functions. It can meet most professional applications. Strong compatibility, can be replaced and upgraded at any time according to the change of use
Another advantage of electronic eyepiece is that it is a relatively independent device, different from the built-in camera system, with more flexibility and operability. When your application direction changes or requirements increase, you can upgrade the electronic eyepiece at any time without changing your microscope, so that your equipment will never be outdated, improve utilization and save money. When your laboratory has several different microscopes that need to collect digital images, you can also use the same electronic eyepiece to complete the image collection. Just change the electronic eyepiece to the microscope you are using. It is very convenient, and it is operated on the same computer that you are accustomed to using. It does not need to change the operating environment, which is more convenient and efficient.
Application interface
Selection of electronic eyepiece The following points are very important to choose a cost-effective and practical microscope camera product:
1. Grade category of image sensor
2. Performance of image processor DSP (color engine)
3. Optical structure characteristics
4. Supported image interface universality
5. Ease of use of software operation
6. After sales technical support
about Digital video For products, Image sensor It is an important component, and its type, size, and quality level are the basis of imaging effect. DSP color processing engine is the most critical factor to determine the image quality of the camera, and it is a parameter that is not widely understood but often ignored. It contains multiple processing of hardware and software, and is the core of perfect image reproduction. In addition, optical performance matching is also the key to image quality Optical glass lens High quality filters and lenses of specific wavebands have optical dust-proof design. Since the imaging focus plane is not on the top lens surface, a small amount of dust attached to the lens in use will not affect its imaging quality. The software and driver support Twain and Direct Show, the two most common standard image transmission interfaces in the world at present. The software has a friendly operation interface and can be selected from pure simplified Chinese and English versions. All of our image products enjoy a three-year warranty period. If you have any questions in use, you can contact our technical personnel and obtain professional guidance through online consultation, FAQ, email, telephone and other ways. Help you solve various application and use problems. The optical interface of the electronic eyepiece that is widely used is the size of the international standard eyepiece, which is suitable for all kinds of biological microscopes with an inner diameter of 23.2mm, 30.0mm or 30.5mm Stereo microscope 、 metallurgical microscope 、 fluorescence microscope 、 Polarizing microscope , melting point tester, hardness tester and other optical equipment. There is also a special model of C-Mount interface, which can be used on the standard C interface. High quality digital eyepiece optical part adopts high transmittance and high quality optical glass Made of, greatly improving the performance of resin lens products. The assembly workshop is required to be equipped with thousand level dust-free and ultra-high voltage electrostatic dust removal equipment, and a new dust-proof structure is adopted to ensure the high-quality effect of each product. With CFS multi focus convergence optical system (special configuration) -- optical dust-proof lens -- anti glare lens
Technical parameters of general electronic eyepiece
data output | USB 2.0, Support Direct Show&Twain |
sensor | 1/2 inch large array color sensor Ultra fine color engine Dynamic effective pixels 5 million |
Horizontal resolution | >2000 TV Lines |
data type | True color 24Bit R × G × B × 8 |
Effective resolution | 2592 × 1944 (hardware) |
Frame rate | 7fps @ 2592 × 1944 Maximum speed up to 30fps |
Image capture | High speed preview and "static" capture, instant capture, video stream recording |
Video format | 2592×1944 / 1280×960 / 800×600 / 640×480 |
spectral response | 400-650nm (IR-Cut added) |
sensitivity | 1.2v/lux-sec @550nm |
dynamic range | >68dB |
Driver | Direct Show and Twain |
Power Supply | USB 2.0 output DC 5V/350 mA |
Image control
White balance: automatic white balance+manual R-G-B adjustment
Exposure: auto exposure/target value setting/exposure time control/gain setting
Color: color black white mode switch/gamma/saturation/contrast
Auxiliary settings: image horizontal inversion/vertical inversion
Light source frequency: 50Hz/60Hz switching
Frame rate: low speed/high speed
System requirements for general electronic eyepieces
★ Intel Pentium 2.0GHz CPU (Dual core 2.8GHz or higher configuration is recommended)
★ Windows 2000 / XP(SP2-SP3) / Vista
★ DirectX 9.0 or later
★ 1GB memory or higher
★ CD-ROM drive
★ 32 bit graphics card
★ 21 "display or larger
★ High speed USB 2.0 port
Electronic eyepiece is a precision photoelectric instrument. During storage, transportation and use, please do not vibrate violently, drop, immerse in water or use in high temperature and humidity environment. During installation, do not stain, contaminate or scratch the CCD or lens surface, and do not pull or bend the signal connection wire with force.
After use, please cut off the power supply in time to prevent long-term standby state and accelerate the aging of equipment components.
The production and assembly of electronic eyepiece shall be completed in a dust-free condition. Please do not open the back cover and field mirror of this equipment at will. There are no user maintainable parts inside to avoid damage to internal components.
