Wholesale K11 permeable crystalline color waterproof slurry for toilets
- Brand:
- Guarantee amount:
- Investment amount:
- Franchise fee:
Xinxiang JS polymer assembly general K11 waterproof coating is a modified cement-based two-component waterproof coating. It not only has the durability of non-polar materials, but also has a certain degree of elasticity, strong penetration function, moisture-proof and leak proof, and can be constructed on a wet base surface. It is a green, environmentally friendly waterproof building material recommended by the Ministry of Construction. Product advantages: strong adhesive force, good abrasion resistance, certain flexibility, strong adhesion with the base course, and can be constructed on the wet base surface. Environmental friendly product, non-toxic, tasteless, pollution-free, with excellent waterproof performance and breathable function. The construction is simple and economical. Scope of application: basement, toilet, kitchen, exterior wall, and cooking pool. Instructions for use: base surface treatment: the base surface must be flat, firm in structure, free of oil stain, hollowing, and fully wetted before construction without ponding. Ingredients: according to the weight ratio of emulsion: powder - 1:2.66. Slowly add the powder into the emulsion, and use the machine to mix while adding the powder. Add about 3% of clean water as appropriate. The stirred slurry should be uniform and fine without pigment particles. Construction: evenly apply the mixed slurry on the wet substrate with a brush or a shotcrete machine, and carefully check whether there are any defects and holes. Generally, more than two layers should be applied. After the first layer is applied, wait about 1-2 hours for the second layer. When the first layer is not completely dry, but will not fall off when touched by hand, there will be a good combination between the two layers, If the second layer is completely dry at the first time, spray a small amount of clean water before completion. To avoid pinholes, brush the second layer at an angle perpendicular to the direction of the previous layer, and the thickness of each layer shall not exceed 0.5mm. Reference dosage: the general thickness is 1.0-2.0mm, and the dosage is about 1.5-2.5kg/m2. Package specification: 18kg/barrel (emulsion: 5kg, powder: 13kg); 10kg/barrel (emulsion: 2.8kg, powder: 7.2kg); 5kg/barrel (emulsion: 1.4kg, powder: 3.6kg). Color: white emulsion and gray powder (color can be provided according to customer requirements).