Floor type 96 core optical cable junction box | outdoor 96 core optical cable junction box| Wall mounted 96 core optical cable junction box | SMC96 core optical cable junction box | stainless steel 96 core optical cable junction box
I summary
one This product is used to connect the backbone optical cable and the distribution optical cable nodes in the optical fiber access network. It can realize the functions of optical fiber fusion, storage, distribution and scheduling. The technical standard of the product complies with YD/T988-2007.
two characteristic
1) The box is made of high degree SMC unsaturated polyester anti-corrosion special synthetic material, which has high heat insulation and can withstand the drastic climate and harsh working environment
2) Box positioning door Lock, Shengjiu brand lock, safe and reliable.
3) It can realize the interconnection, cross connection and storage of optical cables.
4) There are reliable optical cable fixing and grounding protection devices.
5) Use fusion wiring integration module, suitable for FC, SC optical fiber Adapter Clamping; It can be put into a splitter for light distribution.
6) The distribution and scheduling of optical fiber are full frontal operation.
three Technical indicators
one ） Service conditions
Ambient temperature: - 20 ℃~＋ 60 ℃
Storage and transportation temperature: - 25 ℃~＋ 55 ℃
Relative humidity: ≤ 95% (＋ 40 ℃)
Atmospheric pressure: 70Kpa~106Kpa
two ）Photoelectric performance
Connector insertion loss (including insertion, interchange and repetition) ≤ 0.2dB
Return loss: FC/ PC ≥45dB FC/ UP C≥50 dB FC/APC≥60 dB
The durability life of plugging and unplugging is more than 1000 times.
four Box features
1) Enclosure sealing protection grade: GB4208/IP65
2) Static load capacity: box shell ≥ 980N, side surface ≥ 500N, door hinge ≥ 200N
3) Insulation resistance: the insulation resistance between high-voltage protective ground and frame is greater than 1000M Ω (500V/DC)
4) Withstand voltage strength: the high-voltage protective ground and the rack are connected with 3000 V DC for 1 minute without breakdown and flashover.
2、 Specifications
one Outline dimension of product: 960mm * 525mm * 310mm (H * W * D)
two Large capacity: 168 cores (144 cores generally)
3、 Installation
1) Precast cement base,
The overall dimension of the cement base (length × width × height) is 590mm × 420mm × 300mm, and a 405mm * 170mm * 300mm inlet line is reserved in the center of the foundation.
two ） Embed the anchor screw to ensure that the center distance of the anchor screw is 438mm * 180mm, and the screw is 50mm higher than the horizontal plane (expansion bolt can also be used for fixation).
three ） Place the box on the cement base, align its fixing hole with the embedded anchor screw, and then lock the anchor screw. During installation, keep the box vertical and horizontal with the cement base. In the case of existing cement base, fix it with 4 M10 × 60 expansion screws.
4、 Use and operation
one ） Opening of box
Open and close the box door with a special key.
two ） Optical fiber wiring principle
Optical cable and optical cable cross connection shall be adopted. That is, incoming optical cable and distribution pigtail, outgoing optical cable and another distribution pigtail are welded and terminated respectively. Jumper pigtails are used for cross connection between the two.
three ） Cable in and out and fixation
The optical cable enters the box from the bottom of the box. After the optical cable enters the box, use a stripper to remove the protective layer of the optical cable. The stripping length is determined according to the actual situation, and the optical cable is fixed on the cable fixing plate in the box with a throat clamp at the stripping position; Fix the optical cable reinforcing core on the cable core fixing shaft on the fixing plate.
four ） Fusion of optical fiber
Remove the cover plate on the fusion module, put the optical fiber protective sleeve into the fiber core before fusion, then fuse the end of the optical fiber core with the end of the tail fiber core according to the optical fiber fusion process, and then roll it into the fusion plate of the fusion integrated module. The fused pigtail is introduced into the distribution panel of the fusion integrated module and inserted into the corresponding adapter.
five ） Connection of double end pigtail (jumper)
Put the welded fusion module into the box, insert the two ends of the double end pigtail (jumper) into the corresponding adapter, and the residual fiber reel is on the wire ring to complete the connection of the optical fiber.
six ） Winding and connection of PLC splitter
Fix the micro PLC splitter inside the fusion integration tray with 495 glue, and then branch it into the winding reel for winding. Then screw the input and output ends of the PLC splitter onto the adapter of the corresponding model and connect it to the notch of the fusion integration tray.
Cixi Yixin Communication Equipment Factory is located in Guanhaiwei Town, Cixi City, a beautiful and rich Yangtze River Delta development city, to the east of the port city Ningbo (Beilun Port), only 50 kilometers from Beilun Port, and 40 kilometers from Ningbo Airport; Hangzhou, the capital of Zhejiang Province, is adjacent to 329 National Highway in the west and Shenyang Haikou Expressway runs through it. It is located on the south bank of Hangzhou Bay Sea Crossing Bridge, which is the world's attention. The sea, land and air transportation is very convenient.
Yixin is a private enterprise specialized in manufacturing communication equipment and electronic components, mainly focusing on production, sales and service. The industry covers mobile communication supporting equipment, optical communication equipment and devices, data communication equipment, broadband equipment, communication engineering and other fields. Relying on advanced management, perfect quality assurance system, strong technical force, strong comprehensive strength and enterprise integrity, Yixin Communication has become the main equipment supplier of China Mobile, China Telecom, China Unicom and some foreign communication operators, and is widely used in the special networks of radio and television, power, postal, military units, relevant departments, enterprises and institutions, At the same time, it provides supporting products for major equipment manufacturers at home and abroad.
After several years of development, Yixin Communication has developed from low-end communication product manufacturing to high-tech industry. With advanced CNC equipment for sheet metal automatic processing, full-automatic spraying assembly line, optical communication devices and other production equipment at home and abroad, and complete high-precision testing instruments, it provides reliable quality assurance for products.
Our development principle: pursue technological innovation, process improvement, channel cooperation, and the work goal that must be achieved if you want to, strive to create a high corporate image, a high working environment, high enterprise management, and high customer service, and sincerely cooperate with domestic and foreign users, with Yixin Tongxin, quality first, and integrity first!
Yixin Energy ：
Always adhere to the enterprise policy of "quality, price and service", strive for high standards of user satisfaction and enterprise energy of "unity, pragmatism, pioneering and innovation", and improve work efficiency with advanced technology and scientific management.
Yixin's purpose:
Customer satisfaction comes first, enterprise honor comes first, and product quality comes first. Yixin's goal: to create a century of Yixin, to be in a position in the industry and in customer relationship management.
Yixin's positioning:
All brands will enjoy a certain popularity at home and abroad in the next decade.
Operating products include:
FTTH Fiber to the home series : Optical fiber quick connector, cold connector, PLC optical splitter, optical fiber desktop box, optical fiber panel, optical fiber flange, leather cable, optical fiber corridor box, optical fiber distribution box, optical fiber terminal box, etc
ODF Optical fiber distribution series: Optical fiber distribution cabinet, optical fiber distribution frame, optical fiber junction box, ODF box, fusion integration module, bundle, ribbon pigtail, optical fiber jumper, fusion plate, optical fiber adapter, optical fiber attenuator, etc
MDF MDF series: MDF, outdoor cabinet, security arrangement, test row, security unit, wiring tools, etc
DDF Digital distribution frame series: Imitate Siemens digital distribution frame, DDF distribution frame, etc
Generic cabling series: Network cabinet, jumper frame, distribution frame, cable management frame, network module, network panel, network jumper, junction box, STB junction box, clamping module, etc.
