Is it good to install the integrated cooker? How to choose and purchase integrated stoves?

Is it good to install the integrated cooker? It is very difficult to choose household appliances freely in the decoration of kitchens, so some families can choose integrated stoves freely to avoid difficulties. How about installing integrated stoves? How to choose and purchase integrated stoves? Is the installation of the integrated cooker good? 1. The suction of the range hood: they all say that the suction of the integrated cooker is much better. Personally, I think the suction of the integrated cooker is not much different from that of the range hood. Of course, there is no test data, just a subjective feeling, and there is no doubt that different brands and models are different. It is often said that stir fried peppers cannot smell. Anyway, if my parents' kitchen door is not closed, they will still smell stir fried peppers, let alone stir fried peppers. This is a molecular movement. How can they not smell. 2、 Installation problem: The integrated cooker is of the bottom row type, and the holes in the public flue of general commercial housing are all on the top, so a new transformation is required to plug the holes on the top and open the holes on the bottom. The smoke pipe shall pass through the floor cabinet, and the floor cabinet shall be perforated. 3、 Space saving: The position of the integrated stove can save about one meter of cabinet money, and the upper position can be used as a wall cabinet to improve storage. That's right, but the integrated cooker is a lower exhaust pipe. The floor cabinet from the integrated cooker to the middle of the flue must be perforated through the flue, occupying the space inside the lower cabinet. there are both advantages and disadvantages. 4、 Price problem: most integrated stoves are integrated with cigarette machines, stoves and disinfection cabinets, so the price is generally high, which is equivalent to the price of three sets of first-line cigarette stoves, and may also be high. Another reason is that the sales volume of traditional cooker manufacturers is far higher, and the sales volume is better, so the cost will also decline. Of course, the pricing is not linear with the cost. However, the integrated cooker can save some money on cabinets. For users who do not need disinfection cabinets, it is equivalent to packaging and reselling disinfection cabinets. Of course, today there are also split integrated stoves. 5、 Service problem: The integrated cooker market is also a mixture of good and bad people, and there are few good after-sales services. For example, my parents' home is an unknown brand, and there was a repair in the middle. As a result, the factory found a third-party maintenance worker to serve, and the business is not very skilled. You can search for word of mouth and comments on the website before buying. 6、 Why don't brands of first-line stoves be manufactured? This is not a problem. The market share of the integrated cooker is too small compared with that of the cigarette machine cooker. Brands like Fang Tai and the boss are making good money when making cigarette machine cookers. Why invest money to develop another alternative product? Besides, this product is not subversive. 7、 Conclusion: The air outlet of the integrated cooker is closer to the lampblack, and theoretically, the suction will be better; Can save part of cabinet investment; The surface is easy to scrub; The price of integrated stoves is slightly higher; The installation will be more difficult than that of the cooker; Generally, the function of disinfection cabinet will be integrated. How to choose integrated stoves 1. The size of firepower depends on the suction. The selected air volume and air pressure are quite large, and the smoke exhaust effect is good. It depends on the fire power. The fire power is large and can be adjusted in a wide range to meet the needs of various cooking markets. Air volume and air pressure, the higher the air volume, the slower the kitchen smoke can be discharged. 2. Convenient cleaning silencer, easy to clean, some products have cleaning function. 3. The working noise cannot reach 60 decibels.

label: Integrated stove

How to clean the integrated cooker correctly? What are the methods?

The integrated stove greatly saves the kitchen space, and thus plays a role in energy conservation and environmental protection. With the application of integrated stoves in household, it is necessary to clean and maintain integrated stoves. Many people think that cleaning integrated stoves is a troublesome thing. How to clean integrated stoves correctly? What are the methods? How to clean the integrated cooker correctly 1. When cleaning the pot rack, the owner can use a soft brush to clean it. It mainly cleans the surface of the base, ignition needle, thermocouple, etc., and timely removes the dirt stuck on the surface. This avoids the possible drawbacks of stubborn stains on the cleaning burner caused by granular cleaning agents, steel wire balls, knives, etc., or it may damage the ignition needle, thermocouple flameout protection needle and other vulnerable facilities, resulting in failure of the safety device of the integrated environmental protection stove, and wear on the surface of components, which will affect the future service life of the integrated stove. 2. Clean the surface of the stove with soft gauze and soapy water, which can greatly maintain the stove table. However, do not use granular cleaner or steel wire ball for cleaning, which will cause scratches on the stainless steel surface, thus affecting its beauty. In addition, pay attention to cleaning the oil smoke exhaust passage. After the integrated cooker is used for a long time, a large amount of dirt will appear on the oil smoke extraction channel, and then the channel should be cleaned every other time. When cleaning the flue, it is better to use degreasing agent for cleaning. Start the lowest gear of the range hood first, and then spray the degreaser to let it suck into the channel. After that, the dirt will be decomposed by the degreaser and then flow into the oil pan. 3. If the owner of the clean combustion hole finds that the flame is uneven and some holes have no flame during use, this is the phenomenon of blockage. When this happens, the fire hole on the fire cover should be cleaned. After the burner cools down, remove the fire cover and use a steel needle to remove the carbon deposit in the fire hole. Do not use water to flush the fire cover. At this time, bubbles will block the fire hole, and do not use a hard object to wipe its surface. This will cause black enamel, which will make it impossible to repair the damage. 4. To clean the integrated stove disinfection cabinet is to timely wipe off the accumulated water on the chassis and the dirt on the food rack, and regularly maintain them. The integrated cooker is basically in the form of side suction and down exhaust. The oil spots gather at the lower part of the body, and the oil stain adhesion speed is not fast. After 2 years of use, it needs to be cleaned. Otherwise, various problems will arise.

label: Integrated stove

How to select integrated stoves? How to guarantee the quality?

How to select integrated stoves? The integrated cooker integrates the functions of range hood, cooker, disinfection cabinet, storage cabinet, etc. It has the characteristics of high smoke absorption rate, energy conservation and environmental protection, ultra quiet and intuitive display, saving space, costs and human operation procedures. How to select integrated stoves? How to guarantee the quality? Selection method of integrated cooker 1. Whether there is an automatic flameout protection device; 2. Whether it is convenient for maintenance and cleaning, or cleaning links can be reduced; 3. Whether the internal structure is scientific and advanced; 4. Energy saving, high thermal efficiency, power saving, environmental protection and practicality; 5. To have excellent workmanship, durable materials, beautiful and fashionable; 6. What are the major innovations and practical functional advantages; 7. The quality is guaranteed, the goods are compared, and the goods are genuine at a reasonable price; 8. Whether the after-sales service is perfect;

label: Integrated stove

What are the advantages of the integrated cooker? Why is integrated cooker popular?

What are the advantages of the integrated cooker? Integrated cooker is a kitchen appliance that integrates multiple functions such as range hood, gas cooker, disinfection cabinet and storage cabinet. It is also called environmental protection cooker or integrated environmental protection cooker in the industry. What are the advantages of integrated cooker? Why is integrated cooker popular? Advantages of integrated cooker 1. Integrated innovative design integrates the functions of range hood, gas cooker, disinfection cabinet, storage cabinet, microcrystalline cooker, induction cooker, etc., with unique combined and efficient smoke absorption effect, to maximize the use efficiency of various functions, and fully automatic intelligent control, Realizing the requirements of people's pursuit of green and environment-friendly high-end kitchen appliances. The traditional kitchen appliances are based on the traditional concept and traditional design, which can not compete with the integrated stove in function combination and innovation. 2. The ultra-high oil smoke extraction rate of the integrated stove is more than 95%. The innovative application of micro aerodynamics principle has made a two-way isolation between the pollution source and the external environment, which can effectively eliminate the oil smoke and steam before diffusion without affecting the operating line of sight and without passing through the human respiratory pathway. Even fried peppers can not smell a bit of cooking, Give you a clean kitchen environment. However, the traditional kitchen equipment has a long space circulation distance of lampblack, and the lampblack diffuses seriously. In the process of rising, most of the lampblack diffuses into the room, becoming lampblack and heat, leading to the kitchen walls and items filled with oil dirt. The kitchen hygiene has become a tedious task, and the kitchen temperature rises, so entering the kitchen cannot be a pleasure. 3. The real low noise exhaust design eliminates the noise source placed on the head of the human body, and applies ultra-low, noise technology and silent air duct design technology to reduce noise. Relatively speaking, the traditional kitchen range hood works in the position of human auditory organs, with high noise. Long term operation in the kitchen is likely to cause human upset, dizziness, tinnitus and dizziness. 4. Intelligent control of modern control system organically combines gas stove, range hood, disinfection cabinet, etc. according to people's common use mode, and microcomputer control is simple and convenient. In traditional manual operation, the range hood is located on the head of the human body, so it is easy to touch the head when operating. It is easy to drip and leak oil after a long time. Cleaning is frequent and inconvenient. 5. Space saving, resource saving and environmental protection cooker N is integrated with the lower row design, eliminating the space of the traditional wall mounted range hood above. The environmental protection cooker and kitchen cabinet are integrated, and the installation decoration is highly free, providing more space for the island style and open modern kitchen. The design of free flip also gives consumers more choices. The traditional design of hanging range hood occupies the upper space of the kitchen. In order to protect the indoor environment, the kitchen must be isolated, and the space utilization rate is small. Currently, most kitchens are designed as male tables, and the installation is greatly limited. 6. The healthy and pollution-free traditional range hood has a serious spread of oil smoke, rising everywhere, burning smoke, polluting the indoor air. Frequent contact will lead to facial skin oil, large pores, dark and so on. Excessive inhalation will lead to obesity, slow reaction, "drunken oil syndrome", and even lung cancer, nasal cancer and so on. Due to the upward suction design, the heat rises, especially in summer when you have to work in a hot environment. The kitchen work under such environment for a long time has become the enemy of human health. 7. Safety performance upgrading: flameout automatically cuts off the air source, electric leakage automatically cuts off the power supply, automatically detects air leakage, voltage and current overload detection, timing reminder function and other safety devices, which can play a role in safety protection during use and improve the safety guarantee coefficient. Ordinary stoves are easy to turn over and cause accidents if they are used carelessly. The elderly and children are more dangerous to use, and the safety protection function is poor. Once the gas leaks, the consequences are unimaginable. 8. The green environmental protection adopts the side suction and bottom exhaust technology, and the smoking effect is more than 95%. There is no smoke feeling in cooking, even the steam will not spread, and the room will not cause oil smoke pollution, so it has the effect of environmental protection. Compared with integrated stoves, traditional kitchen appliances still have a big gap in terms of oil smoke absorption and other aspects. It is difficult to avoid the existence of a small amount of oil smoke pollution in the kitchen.

label: Integrated stove

How to maintain and care the artificial stone countertop cabinet?

How to maintain and care the artificial stone table top? As its name implies, artificial stone is an artificial stone with certain strength and color, which is made by mixing inorganic mineral materials and some auxiliary materials with organic adhesives, and then mixing, shaping, drying, cutting, polishing and other processing. How to maintain and care the artificial stone countertop cabinet? Maintenance method of artificial stone countertop cabinet (1). Daily maintenance can be kept clean by wiping with sponge and neutral detergent; To disinfect, use diluted daily bleach (mixed with water 1:3 or 1:4) or other disinfectant to wipe the surface. Please use a towel to wipe away water stains in time and try to keep the table dry Because the water contains scale and strong oxidant (chloride ion), the stain that is difficult to remove will be produced if the water stays on the cabinet table for a long time. Please dry it with a hair dryer. The stain will slowly disappear after a few hours or days. Small white marks can be removed by gently wiping the surface with a dry cloth moistened with edible oil. ⑶ In case of small stains, it can be wiped with neutral detergent and gel toothpaste. Artificial stone countertop cabinet care methods The decontamination steps of some stubborn stains should be determined according to the polishing degree of the board surface: ⑴. Matte surface: polish with a detergent circle, then clean, and then dry with a dry towel. Wipe the whole table with a cleaning cloth every other time to keep the surface smooth Semi matt surface: polish with a scouring pad dipped in a non abrasive detergent circle, dry with a towel, and use non abrasive polishing materials to enhance the surface brightness effect. ⑶ High gloss surface: use sponge and non abrasive brightener to grind. The dirt that is difficult to remove can be polished with 1200 mesh sandpaper, and then brightened with soft cloth and brightener (or furniture wax).

label: cupboard

How to choose cabinet? How many shopping tips are there?

How to choose cabinet? Now many families will choose the cabinet, because the cabinet is really a necessary piece of furniture for the kitchen, but many friends do not know how to choose the cabinet, and how to choose the cabinet? How many shopping tips are there? How to choose a cabinet? Look at the edge sealing of the board. The edge sealing of high-quality cabinets is exquisite, smooth, and has a good feel. The sealing line is straight and smooth, and the joints are fine. Professional large factories use linear edge banding machine to complete the processes of edge banding, head breakage, trimming, chamfering, polishing, etc. at one time, to ensure the most accurate size. The workshop type small factory uses a brush to apply glue, press and seal the edges manually, use a wallpaper knife to trim the edges, and use a manual polishing machine to polish. Due to uneven pressure, many places are not firm, and harmful substances such as formaldehyde will volatilize into the air. 2、 Look at the punching. Panel furniture is assembled by three in one connectors, and the matching and precision of the hole position will affect the structural firmness of the cabinet box. 3、 Look at the cutting board. Cutting board is the first process of cabinet production. Large professional enterprises use electronic saws to input processing dimensions through computers, and the computer controls the dimensional accuracy of material selection, and can process several plates at a time. The performance of the equipment is stable, the dimensional accuracy of the plates produced is very high, and the tolerance unit is in microns. 4、 Look at the door panel. The door panel is the face of the cabinet, which is as important as the human face. The door panels produced by small factories are easy to be deformed due to moisture due to improper treatment of base materials and surface technology. 5、 See the assembly effect of the whole cabinet. Any dimensional error in the production process will be shown on the door panel. The door panel of the cabinet produced by a small factory will have uneven seams and uneven gaps, ranging from large to small. 6、 Look at the drawer slide. Although it is a small detail, it is an important part that affects the quality of the cabinet. Due to the error of hole position and size, there is an error in the fitting of slide rail installation size, which causes the drawer to pull unsmoothed or loose left and right. Pay attention to whether the drawer gap is even.

label: cupboard

Why does the whole house customization become the mainstream of furniture in the future?

Whole house customization is a home customization solution integrating home design, customization, installation and other services. Whole house customization is the exclusive home of consumers manufactured by household enterprises on the basis of mass production and according to the design requirements of consumers. Then why is it that customization of the whole house will become the mainstream of furniture in the future? The reason why full house customization will become the mainstream of furniture in the future is in line with modern people's pursuit of life. With the development of society and the rapid change of science and technology, consumers are paying more attention to the improvement of life taste. On the basis of practical furniture, its artistic value and aesthetic function are increasingly prominent. As an upgraded version of the overall furniture, the customization of the whole house has a prominent personality. In the process of design, it pays attention to in-depth communication with consumers, which can fully combine consumers' living habits and aesthetic standards. Simplifying the decoration process and buying a new house has become a headache for urban white-collar workers. First, the decoration cycle is long, and sometimes the project can be as long as half a year, which seriously affects the work and life of consumers. Secondly, there are too many things to buy and worry about. Sometimes, as a layman, he is often deceived. The concept of full house customization greatly simplifies the whole decoration process. The integrated design allows consumers not to run around and scrape together. While enjoying the overall advantages, it also saves a lot of time. Enterprises that can promote environmental protection to a new height and launch full house customization are bound to have deep technological precipitation and brand reputation, which is a symbol of strength. In addition, the whole house customization focuses on environmental protection, which has promoted environmental protection to a supreme position both in the selection of materials and in the process of manufacturing. As a new development direction of overall furniture, full house customization, although young, has demonstrated its vigorous development strength. In the near future, full house customization will become the mainstream in China's overall furniture market.

label: Whole house customization

How to identify the quality of anticorrosive coating at the completion stage?

How to identify the quality of anticorrosive coating at the completion stage? After the decoration is completed, we can still identify the quality of the paint from the painted wall surface, mainly from the three aspects of drying time, scrub resistance and weather resistance, which are introduced below. How to identify the drying time of anti-corrosion coating quality. According to the national regulations, the surface drying (surface drying) time of coatings should be less than 2 hours, and some high-end coatings of big brands can be less than 1 hour. If the humidity and temperature reach certain suitable conditions, the surface drying time can also be shortened, and some can even be dried within half an hour, which is the characteristic of high-quality coatings. Scrub resistance. The judgment of scrub resistance is very simple. After painting, there are usually many processes to be done, such as installing wooden doors, floors, wardrobes, lamp hardware, sofa furniture, etc. Workers are liable to dirty the wall if they are careless. At this time, if they can wipe it off, it is basically qualified scrub resistance paint, otherwise it is suspected of false publicity. Weather resistance. When the paint is used, it needs to withstand the test of climate, such as the comprehensive damage caused by light, cold and hot, wind and rain, bacteria, etc. Its resistance is called weatherability. Due to the influence of temperature, humidity, bacteria and other factors, the coating with poor weather resistance will gradually change from shiny to dirty and dark over time, and may be accompanied by slight powder shedding, which is also the performance of poor coating quality. The quality of paint directly affects the quality of wall decoration, so the quality of paint must be paid attention to. The above mentioned methods to identify the quality of coatings can provide reference for everyone, and I hope they can be helpful.

label: Anticorrosive coating

How to quickly and accurately identify the quality of anti-corrosion coatings?

How to quickly and accurately identify the quality of anti-corrosion coatings? Wall decoration is a very important link, which directly determines the style and final effect of the overall home decoration to a certain extent. Choosing a high-quality paint can help us avoid many unnecessary troubles. How to quickly and accurately identify the quality of anti-corrosion coatings? How to distinguish the quality of anti-corrosion coating In the process of home decoration, there are two situations for the purchase of coating: the owner buys it by himself or the construction party packs the materials. For the latter, we can only screen its quality during construction or after decoration. If the owner buys the goods himself, he must be careful. He should not only listen carefully to the salesperson's introduction, but also observe the following details. Look at the brand. Many home decoration professionals on the Internet often say not to pay too much attention to the brand of paint. In fact, it means to pay more attention to the essence of some paint on the basis of well-known brands. It does not mean that you can buy three no products without looking at the brand. What are the well-known paint brands on the market now? You can check them online before buying. We won't list them here (to avoid the suspicion of advertising). Remember to do some simple homework before buying. Look at the package. The so-called "packaging is the face of an enterprise", a powerful formal enterprise, because of the large sales volume of its products, its packaging printing volume is also large (less printing volume will lead to increased costs), so the packaging will look very delicate and formal. Look at the price. Regular brand coatings are produced according to the formula, and the price will not be too cheap; However, the coating with poor quality, some of which are jerry built, and some are even produced in small workshops, has low cost and is much cheaper than the regular coating. If there is a big difference between the paint price and the market price, it is better not to take advantage of small gains, otherwise it is easy to suffer big losses.

label: Anticorrosive coating

How to identify the quality of anti-corrosion coatings in 2020?

How to identify the quality of anti-corrosion coating? Anticorrosive coatings play an important role in paint coatings, which is an indispensable part of paint coatings. How to identify the quality of anti-corrosion coatings in 2020? How to identify the quality of anti-corrosion coating? 1. Detection of film adhesion Paint adhesion refers to the ability of the paint film to combine with the surface of the object to be coated or between coatings. General test standards for film adhesion include: GB/T1720-1979 Determination of Film Adhesion GB/T9286-1998 Cross cut Test of Paints and Varnishes Film GB/T5210-2006 Pull off Test of Paints and Varnishes Adhesion 2. Detection of film thickness The thick film standard of general anti-corrosion materials is 100 μ M or 150 μ M or so. The heavy anti-corrosive coating will be 300 μ M or more. Within the scope of this standard, its anti-corrosion effect is the best. Therefore, it is very important to detect the rear modulus. The test standards include: GB/T13452.2-2008 Determination of Paint and Varnish Film Thickness 3. Fineness test, that is, the fineness of solid matter in the paint. Fineness has great influence on film quality, film gloss, durability and storage stability of coatings. However, the finer the better, too small will affect the adhesion of the paint film. Test standards include: GB/T1724-1979 Determination of Coating Fineness GB/T6753.1-2007 Determination of Grinding Fineness of Paints, Varnishes and Printing Inks. Viscosity is used to indicate the viscosity of paint. Test standards include: GB/T2794-2013 Determination of adhesive viscosity Single cylinder rotary viscometer method GB/T9269-2009 Determination of paint viscosity Stommer viscometer method GB/T1723-1993 Determination of paint viscosity GB/T6753.4-1998 Determination of flow time of paints and varnishes with flow cup 5. Detection of nonvolatile content The nonvolatile content is also called solid content, Its content has a great relationship with the film quality and the use value of the paint. The test standards for nonvolatile content include: GB/T1725-2007 Determination of nonvolatile content of paints, varnishes and plastics

label: Anticorrosive coating