Product Introduction
The raw material of Jiude calcium silicate board is made of high purity quartz Powder, high grade cement The raw material of Jiude calcium silicate board is made of high-purity quartz powder, high-grade cement, high-purity calcium silicate lime , plus asbestos fibers and other Composed of mineral additives, the universal calcium silicate board produced has high toughness, height, high water resistance, and durability. After the raw materials are stirred and mixed according to the ratio of silica and calcium, the embryos are obtained by the copying equipment, and then the silica and calcium are converted into "tobermorite" and hardened by the high-pressure steam curing of the next day. Each process is strictly controlled from raw material processing to positive pressure rear plate finished product processing to ensure that the market provides universal calcium silicate with stable and excellent quality board 。
Product features
Fiber reinforced general calcium silicate board is a lightweight and high building material, which is easy to construct, has good processing performance, can be sawed, nailed, and is not easy to produce warpage and cracks. The surface can be painted or pasted with wallpaper and ceramic tiles, and is not afraid of insects and heat. Its heat insulation, sound insulation performance, and stability to temperature changes can meet the use requirements of buildings. In particular, it has good fire prevention performance, will not burst, and can safely evacuate from the fire area for a long time in case of fire.
In general: Jiude calcium silicate board is light, high, durable, sound insulation, heat insulation, moth prevention, corrosion prevention, engraving, sawing, drilling, easy construction, easy decoration, and small deformation coefficient
Scope of application
Calcium silicate boards can be used for internal and external walls, suspended ceilings, raised floors, kitchen and toilet wallboards, ship and subway engineering boards, partition boards for upper and lower water passages of high-rise buildings, as well as furniture lining boards, fire lining boards, billboards, and cabinet boards.
Transportation and handling
The Jiude calcium silicate board delivered from the factory is stored in a plate to plate stacking manner. This state is also suitable for sea transportation, * * * transportation, road transportation and indoor storage.
Jiude calcium silicate board is not suitable to be placed outdoors or in warehouses where products may be exposed to water in storage. Jiude calcium silicate board must be stored in a solid, flat ground, no water leakage, dust-free and ventilated indoor warehouse. Avoid being affected with damp during storage. In case of being affected with damp, dry Jiude calcium silicate board immediately and place it in a well ventilated place to dry. Otherwise, the sheet may be damaged.
Precautions during handling:
1. It is forbidden to carry by one person, and attention shall be paid to corner protection;
2. Two workers are required to lift the Jiude calcium silicate board together in the width direction, separate their hands as far as possible, lift the long side of the board, and carry it upright to prevent Excessive bending of plates;
3. It is recommended that the plates with a thickness of less than 8mm be transported in overlapping with each other;
4. During storage, ensure that the bottom is flat, the height of each stack is ≤ 800mm, and the number of stacks stored does not exceed three;
5. Plates shall not be placed vertically and scattered, and shall be stacked neatly and horizontally according to specifications and types;
6. The storage place must be dry without water leakage and seepage to ensure the superior performance of the board.
http://www.jiudebuilding.com.cn
