Balancing Machine

　

　

Xuanhua Beilun Balancing Machinery Co., Ltd.

Special rotor balance process

METERS for Balancer

　

LARGE FAN ROTER END DRIVE

Universal BALANCER

　

　

　

YFW-300 Balancing machine Balancing machines for fan Down load: Manual of balancer type YFW300 Work Diameter: 1500mm Mass of workpieces: three hundred KG	HP-16 Electrical measuring instrument for Balancing machine The instrument is a dedicated computer for balance machine, as long as you store a good measurement data, the customer needs what data, you can enter different parameters, the results of different calculations. The calculation parameters can be changed at any time, and the calculated results can be obtained directly. You can first enter the parameter a, b, c, r1, r2, aggravating, to the heavy way, as well as static even solving model, and so on. Can also be after the input, can also be modified at any time, electric measuring box will be at any time to change the output value.
YFW-500 Balancing machine 1. Rotor mass range: 10-500kg 2. Maximum rotor diameter: Φ 1600mm	HP-15 Electrical measuring instrument for Balancing machine The single interface displays all the contents, All of its own hardware and software intellectual property rights. Computer software vector solution of measurement data, full interface digital and graphics display form.
YYW -16000A Balancing machine 7000 mm large di ameter Mass of workpieces: 16000 KG Low-speed Balancing : 60-1000 rpm	RYQ-5 soft-bearing high-precision balancing machine The machine is not a simple replica of the old-fashioned soft-bearing balancing machine, from the mechanical structure and electrical measurement system has been completely redesigned. Mechanical durability greatly improved.
YFW-16000 Balancing machine B alancing machines for fan Work Diameter: 4000mm Mass of workpieces: sixteen thousand KG	YYQ-160 Balancing machine Work Diameter: 900mm Mass of workpieces:100
YFW - 3000 Type of fan impeller balancing machine one The rotor mass range: 50-3000 kg two The largest rotor diameter: diameter 2400 mm 3 Support shaft diameter: diameter of 15-120 mm	YYW-30 Balancing machine Work Diameter: 600mm Mass of workpieces:30 kg
RCD-100 The drive shaft balancer 　 Electromechanical measurement and mechanical introduction about hard bearing balancing machine What is dyn amic balancing	YYQ-160 Balancing machine Work Diameter: 900mm Mass of workpieces:100 　 How to determine a reasonable balancing accuracy

　

　

Xuanhua Beilun Balancing Machinery Co., Ltd.

Addr: Wanfeng R d Dongmenwai Str. Xuanhua District Hebei Provi nce China

Tel: +86 313 3175800

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　

　