-
The flue gas purification system of 400t/d waste incineration power generation project adopts SDA process, which is a dust collector model. The flue gas processing parameters are: air volume 100000Nm/h, temperature 160 ℃; Cloth bag 160 * 6000mm; For reference
-
This is a 35000 air volume pulse bag filter, which is a series of bag filters with different air volumes. The uploaded assembly package compressed file can be modified freely. It is convenient and fast for designers. It is not a feature part, but an assembly file
-
-
Calculation table for design and selection of bag filter
This calculation table for design and selection of bag filter is the crystallization of my experience in the design of bag filter for four years. It can generate various parameters such as main performance parameters, main structure arrangement, main structure size and estimated weight of the filter under the condition of filling in air volume, bag specification and other parameters in almost one minute, especially suitable for the selection of scheme design of bag filter The determination of the preliminary design data can save a lot of time to ensure timeliness, and at the same time, it is of great help to the production of structural design. After this upload, please put forward your opinions. I will further improve it and try to launch more complete calculation tables and software packages within the year.
-
-
Function of single machine bag filter in single point dust removal
The basic structure of a single bag filter consists of three parts: fan, filter, and dust collector. Each part is installed in a three-dimensional frame. The steel plate object is beautiful in appearance, scientific in structure, reliable in operation, and convenient in use.
-
-
Calculation and selection of pulse valve for bag filter
The calculation and selection of pulse valve of bag type dust remover. This calculation sheet gives a detailed introduction to the gas consumption of pulse valve and the number of bags to be blown, hoping to help the dust removal workers
-
-
Cad of 440000 air flow bag filter a design chart
The prominent feature of the compartment low pressure pulse dust collector is to make full use of the dust collector space and adopt a number of unique structural designs. It is both a slow air duct and a settling chamber. 2. The boundary and design of the double row ash hopper are on the inlet centerline of the precipitator. After the flue gas enters the dust remover, large particles of dust fall directly into the ash hopper, which will not cause dust accumulation in the pipeline, and the ash hopper has a large volume. 3. No air volume regulating valve is designed for the air inlet of each bin, and reciprocating offline maintenance valve is set to reduce the valve resistance coefficient and failure point. 4. The built-in bypass system of the precipitator body is adopted. The bypass valve is electrically operated and pneumatically operated with automatic temperature control. The valve structure adopts single valve plate reciprocating type, and the smoke and dust leakage rate is zero, which will not lead to excessive emissions due to the leakage of bypass valve. The bypass system can effectively solve the damage of the filter bag caused by the excessive temperature of the tail flue gas due to the change of boiler load, thus protecting the filter bag. 5. Small caliber filter bags are used. The design diameter of the filter bags is φ 130mm. At the same time, every four filter bags are arranged with an area of 190X250mm in the center, which makes the open space outside the filter bags larger. The larger open space reduces the speed of the updraft and the amount of dust carried by the updraft, so that the dust accumulated on the filter bags is less, which reduces the total resistance loss, The lower resistance loss enables the filter bag to handle more dusty gas. Small caliber filter bag can reduce the amount of compressed air required to remove the dust on the filter bag and save a lot of compressed air. 6. Measures to avoid shaking and collision are taken at the bottom of the filter bag. It will not cause mutual friction between filter bags and extend the service life of filter bags. 7. There is no dust accumulation area and dead corner after the flue gas enters the dust remover, which will not cause pipe blockage. 8. The starting resistance of the precipitator is low (about 400Pa), which can extend the ash cleaning cycle, improve the service life of the filter bag, and reduce the operating cost.
-
Complete set cad of bag pulse dust remover a design chart paper
Design drawing of bag pulse dust remover Pulse bag dust remover has the characteristics of meeting the discharge standard, long service life, high frequency, precise dust removal, long-term non clogging, strong dust removal ability of pulse bag dust remover, high dust removal efficiency, etc
-
CAD of overall dimension and parameter drawing of a Lurgi bag filter
The overall dimensions and parameters of Lurgi bag type dust remover are shown in the detail drawing and effect drawing of CAD plane and elevation drawing. The monomer is consistent with the general layout, and the corresponding relationship between them is accurate. There are no errors, omissions, and flaws in the drawing. Welcome to download.
-
-
-
CAD node of a bag filter a design chart
Bag type dust collector, complete planning of CAD plan and elevation detail drawing and renderings, individual and general layout are consistent, and the corresponding relationship between each other is accurate. There are no errors, omissions, collisions and defects in the drawings. Welcome to download.
-
Detailed plan of a new developed bag filter
The project is: the detailed plan of a new type of bag type dust collector, including the plan, architectural design instructions, etc. The content of the drawing is complete, clear and precise, and designers are welcome to download and use it.
-
Study on energy-saving and efficiency enhancing dust cleaning technology of bag filter
Reducing the working resistance of the bag can significantly reduce the energy consumption of the dust collector. Pulse cleaning is the main method to reduce resistance. The traditional sequential ash cleaning mode reduces the efficiency due to the interaction between boxes and between bag columns in the same box. The proposed "skip ash cleaning" mode is helpful to improve the ash cleaning efficiency.
-
-
Technical parameters: 1. Including 5 modules, 4 for pneumatic conveying and 1 for negative pressure suction. The pneumatic conveying module, with a single set of air volume of 7000 m3/h, has a positive pressure of 5000pa when the shell works. Negative pressure suction module, single set of air volume 5000 m3/h, negative pressure 9000 pa when the shell works. Five sets of dust collectors are placed together, the middle channel is not connected, and each set is an independent module. Including high level air inlet. 2. Handle powdered cellulose dust. Polyester anti-static membrane filter bag with a diameter of 130mm and a length of 3600mm is adopted; With 25 1-inch bags
-
Boiler multi tube bag type cyclone dust collector: it uses pipes for input and cyclone device for dust removal and exhaust. The drawing has many details and novel structure, which can be used for modification and can be used as a reference for mechanical design students
-
Description of dust collector: 1. Design objective: 1) After filtering by pulse bag filter, the discharge meets environmental requirements. 2) Dust removal equipment can operate continuously and reliably for a long time without affecting production. 3) Meet the production requirements of high-grade furniture, ensure the effect, surrounding environment, and the health of operators
-
Large 50000 air volume dust pulse bag filter: multiple filter cartridges are set for dust removal, which are cleaned by high-pressure pulse. The internal structure is clear, and the structure has been determined, which is only for download and learning! Can be downloaded
-
This model is a personal designed pulse dust collector for the suction crown block, which adopts the suspension design. This equipment is an important dust removal equipment for the bulk crane. The main design feature is that the lower part adopts the circular silo design, which makes it difficult to hang the dust on the wall and facilitate unloading. The model is designed for SW2018. The model is only for reference and study. Please do not use it for commercial purposes, and bear the consequences
-
This calculation table for design and selection of bag filter is the crystallization of my experience in the design of bag filter for four years. It can generate various parameters such as main performance parameters, main structure arrangement, main structure size and estimated weight of the filter under the condition of filling in air volume, bag specification and other parameters in almost one minute, especially suitable for the selection of scheme design of bag filter The determination of the preliminary design data can save a lot of time to ensure timeliness, and at the same time, it is of great help to the production of structural design. After this upload, please put forward your opinions. I will further improve it and strive to launch more complete calculation tables and software packages within the year.
-
Final version of calculation sheet for selection of bag filter
The calculation table for the design and selection of bag filter is the crystallization of my experience in the design of bag filter for four years, and has finally reached a relatively satisfactory level after nearly a year of correction. Thank you for your support. This calculation table can generate various parameters such as main performance parameters, main structure arrangement, main structure size and estimated weight of dust remover under the condition of filling in air volume, bag specification and other parameters in almost one minute. It is especially suitable for saving a lot of time in the selection of bag dust remover scheme design and the determination of preliminary design data to ensure timeliness, At the same time, it is of great help to the production of structural design. Instructions are uploaded at the same time
-
-
-
Full set of cad drawings of XLCM-50-4 long bag low-pressure bag filter
This document is a complete set of cad drawings of XLCM-50-4 long bag low-pressure bag type dust remover, which includes the layout plan of foundation embedded parts, elevation view of dust remover, side view of dust remover, etc. The design is detailed and normative, and can be downloaded for reference.
-
Cad construction drawing of a full set of design for a long bag low-pressure bag filter
This document is a complete set of CAD construction drawings for the design of a long bag low-pressure bag type dust remover. The drawings include: the side view of the dust remover, the elevation view of the dust remover, the layout plan of embedded parts, etc. The design is accurate and the content is detailed, which can be downloaded for reference by netizens.
-
Full set of cad drawings for manufacturing 20000m3_h pulse bag filter
This document is a complete set of drawings for the manufacture of 20000m3_h pulse bag filter, including A2O, membrane tank process water pipeline plan, A2O and membrane tank C-C profile, and axonometric drawings of tap water, reclaimed water, and dosing pipelines in the membrane workshop. The design is detailed and normative, and can be downloaded for reference.
-
Dust remover design CAD drawing of a multi chamber bag filter design
This data is the design CAD drawing of a multi chamber bag type dust collector. Technical description: the welding of the dust collector shall meet the general technical conditions for welding (Q/ZB74-73, After the overall installation of the equipment, apply alkyd antirust paint on both sides. After the installation of the dust remover railing, spray it in a safe color of yellow and black
-
CAD structure of an automatic bag pulse dust collector a design chart
The design drawing of the full-automatic bag pulse dust remover, the detailed drawing and renderings of the CAD plan and elevation are fully planned. The individual units are consistent with the general layout, and the corresponding relationship between them is accurate. There are no errors, omissions, and flaws in the drawings. Welcome to download.
-
-
CAD structural integrity drawing of a wet dust collector tower
The structural drawing of wet dust collector tower body, the detailed drawing and effect drawing of CAD plane and elevation drawing are fully planned. The individual is consistent with the general layout, and the corresponding relationship between each other is accurate. There are no errors, omissions, and flaws in the drawing. Welcome to download.
-
CAD design plan of bag filter for a boiler
The outline drawing of the bag type dust collector for the boiler, the CAD plan and elevation detail drawing and renderings are completely planned. The monomer is consistent with the general layout, and the corresponding relationship between them is accurate. There are no errors, omissions, and flaws in the drawing. Welcome to download.
-
CAD Detail Node Installation Drawing of a Dust Collector
The installation drawing of the dust remover equipment, the detailed drawing and effect drawing of the complete planning CAD plan and elevation, the individual building is consistent with the general layout, the corresponding relationship between each other is accurate, and there is no mistake, omission, collision or defect in the drawing. Welcome to download.
-
-
Equipment installation drawing of 200000 air volume bag filter
Equipment Installation Drawing of 200000 Air Volume Bag Filter Table of Main Equipment Parameters Fan: G4-73NO.18D Air Volume: 200000m/h, Total Pressure: 4000Pa Motor: 380V 315Kw Bag Filter: Processing Air Volume: 200000m/h, Emission Concentration<50mg/Nm3
-
This drawing is applicable to the air inlet regulating valve of the air inlet distribution system of the bag filter; All drawings are drawn according to 1:1 design; The main size is 600x1000 air inlet regulating valve; Including CAD 2D general drawing and parameters; Designed by myself; Welcome to discuss and learn together, and to study 3D together
-
PPW air box pulse bag filter (Plenum Pulse) is an efficient bag filter with the technical level of the 1980s, which is developed on the basis of the introduction of the technology from Puller, the United States, the absorption of the technical advantages of German dust collectors, and the combination of China's actual national conditions. The body of the air box type pulse bag dust collector is divided into several box areas, each box has 32, 64, 96, 128 bags, etc. This set of drawings is the three-dimensional model of the PPW64-4 air box type pulse bag dust collector. The assembly drawings and parts drawings are relatively complete, which can be used for reference and learning