-
Plug injection drawing file, 3+3 mold cavity; Nylon fiber material is adopted; Latent glue feeding of two plate mold; Such products have strict requirements for size; It is estimated that tolerance requirements need to be reserved during design; The B-plate built-in push block ejection product is adopted for the ejection; Full automatic production can be realized; Welcome to download and learn.
-
This drawing file contains a pair of injection mold for the small cover plate of the car navigator. The product is injected with ABS plastic, and at the same time, the product is arranged in a non balanced and layout way, which can ensure the balance of injection molding
-
This drawing file contains all the structures of the injection mold for a set of side feeding experimental mold, including the mold core and the entire mold base. Including product drawing files, the mold structure is relatively complex, including a full set of structures such as the ejection mechanism, waterway, gating system, etc. The drawings can be edited, many of which have good reference significance for injection mold design. The PS drawing file is the file with the shortest file name of the assembly file as the guide file
-
This drawing file contains all the structures of the injection mold for the dispensing port of a thin-walled special-shaped box. The wall thickness of this injection molding product is relatively thin, but the overall size of the product is larger than the price, so it is easy to have insufficient pouring during injection molding, so the gate should be smaller
-
This drawing file contains all the structures of a set of injection mold for large automobile bumper, including the mold core and the whole mold base. Including product drawing files, the mold structure is relatively complex, including a full set of structures such as the ejection mechanism, waterway, gating system, etc. The drawings can be edited, many of which have good reference significance for injection mold design. The PS drawing file is the file with the shortest file name of the assembly file as the guide file
-
The large elbow arc core pulling injection mold is exported to foreign countries. Two products are molded from one product, and the material is PP. The arc radius of the product reaches 300, and the stroke is very large. Because the arc radius is large, the mold alignment is also very large. This mold structure has only one oil cylinder to pull a row, and the swing rod is connected and driven
-
This drawing file contains all the structures of a set of injection mold for the waveguide mobile phone interface plug, including the mold core and the entire mold base. Including product drawing files, the mold structure is relatively complex, including a full set of structures such as the ejection mechanism, waterway, gating system, etc. The drawings can be edited
-
This drawing file contains all the structures of a small twist injection mold for Haier washing machine, including the mold core and the entire mold base. Including product drawing files, the mold structure is relatively complex, including a full set of structures such as the ejection mechanism, waterway, gating system, etc. The drawings can be edited, many of which have good reference significance for injection mold design
-
This is the design of a secondary ejection injection mold with a pipe structure. The mold has a secondary ejection structure, and the first plate pushes the product to move a certain distance. The structural design of using the ejector pin to eject again is very classic and practical, and has reference and learning value
-
The injection mold for the back shell of the electrical panel adopts the structure of one mold and one cavity. The product material is PC+ABS. The mold is divided into upper mold cavity, lower mold cavity, core pulling on the left side of the mold, core pulling on the right side of the mold, and the data format is stp. Welcome to download and learn
-
Injection mold drawing of temperature tester shell, one out two holes, two plate mold, insert mold core, front mold core opening and exhaust, with inclined roof structure, with dome pin, barrel needle, stay head, jack, limit post, mechanical ejection, standard mold base, correct structure, reasonable water transportation, editable without parameters, welcome to download
-
Design drawing of injection mold for the surface and bottom shell of an electronic alarm clock. The injection mold designed is mainly composed of a fixed mold mechanism, a moving mold mechanism, a gating system, a guiding device, a ejection mechanism, a cooling and heating device, an exhaust system, etc. The mold has a clear structural design and a complete disassembly of the inserts. The layout is reasonable and the cost is low
-
This is the design of an injection mold for a robot toy part. The mold has a two plate mold structure. The mold is a latent glue injection. The mold is not difficult, the structure is very popular, and the design of the mold waterway system and ejection system is perfect. Welcome to download and learn
-
This drawing file contains all the structures of a set of independent small connector push tube injection mold, including the mold core and the entire mold base. Including product drawing files, the mold structure is relatively complex, including a full set of structures such as the ejection mechanism, waterway, gating system, etc. The drawings can be edited, many of which have good reference significance for injection mold design
-
The number of cavities decides to adopt the structure of one mold and two cavities, and the cavity layout adopts a straight line arrangement. In this design, the parting surface is located at the maximum contour surface formed along the bottom surface of the product. Because the product surface requirements are not high, the side gate type is selected, and the ejector rod demoulding method is selected for the demoulding mechanism in this design. The core pulling mechanism is designed for the molding of the mold product. In order to ensure the molding quality of the product and shorten the cooling molding time, a proper cooling system is designed for the mold,
-
The design of the part mold is a good test for the design of the shell injection mold. It can strengthen the understanding of plastic mold forming principle, and exercise the design and manufacturing ability of plastic mold. This design takes the injection mold product design as the main direction, and integrates the molding process analysis, mold structure design, and finally the processing method of mold parts, the processing process design of the main mold parts, and the production of processing card sets. It can achieve a good learning and application
-
Arc core pulling injection mold for automobile oil pipe, material PA66+GF30, 2-point Saint Vante needle valve hot nozzle injection, mold exported to Germany, HASCO standard accessories, Merkel oil cylinder, core pulling structure includes rear die oblique core pulling, arc core pulling, travel switch is made of Balov brand
-
Arc core pulling die on the opposite side of the bend, cavity: 1 * 1. The cold runner side gate is used for glue feeding. One mechanical travel position enables the side of the product to be reversed and demoulded, and two mechanical travel positions lock the travel position of the side large oil cylinder. There are 5 oil cylinder rows, of which 2 oil cylinders drive the circular arc core to perform circular arc rotation core pulling action for demoulding through the swing rod, and then 2 oil cylinders drive the whole large row movement for demoulding. One oil cylinder drives internal tunnel core pulling. The structure is complex, and multiple actions are combined
-
This is a set of silica gel product mould for massage instrument. The product is soft silica gel, with large cold flow nozzle, 15 mm eccentric nozzle, dome needle, manual insert, support head, limit post, nozzle, mechanical ejection, panel, A plate, guide post, guide sleeve, B plate, two plate mould, spring return needle pressing back, editable without parameters, drawing file UG8.5, for reference only, welcome to download
-
Complex shell mold design, the product core pulling in multiple directions. The mold is relatively complex. The front mold has two oblique drawing structures, the rear mold has two oblique drawing structures, and there are several oblique jacking structures, mold hot runner, potential product feeding. The overall structure is complex. Welcome to download and learn
-
This is a set of inverter parts injection mold. The export mold has two holes, one mold, and two plate mold has a single hot runner. The insert mold has a dome pin, a flat top, a squeeze block, a stay head, a plug, an ejector rod, a limit post, a mechanical ejection, and a spring return needle pressing back. The structure is correct. The drawing file is UG8.5, which can be edited without parameters. It is only for reference and learning. Welcome to download
-
One mold with two holes, frame type product, cold runner with two plate molds. Glue is injected at 8 points in the product frame. Only a very small surface of the product is the exterior surface, and the rest are the interior surface. Therefore, the problem of the suture at the inlet point is not serious, but it is necessary to ensure that the suture is not easy to crack. Welcome to download and learn
-
The mobile phone side key kit is the whole structure of the three plate mold injection mold. The mobile phone side key is an important part of the mobile phone. This mold is an injection mold for the mobile phone side key kit, so the structural design of the mold and the accuracy of the product have relatively high requirements, and mold processing is also difficult
-
This drawing file contains all the structures of a set of 3D bend complex core pulling injection mold, including the mold core and the entire mold base. Including product drawing files, the mold structure is relatively complex, including a full set of structures such as the ejection mechanism, waterway, gating system, etc. The drawings can be edited, many of which have good reference significance for injection mold design
-
This drawing file contains all the structures of a set of ultra long core pulling injection mold for threaded elbow. This product is the bending part of a pipeline system. The internal core pulling distance is relatively long, and the design of one mold with two cavities is adopted. Because the core pulling distance is relatively long, the standard oil cylinder is used for core pulling instead of the traditional inclined guide pillar core pulling method. The drawings can be edited, and many of them have good reference significance for injection mold design. The drawing file is the assembly file, the file with the shortest file name is the guide file. This mold feature: because the product is long, the cylinder is used for core pulling
-
Canon printing paper feeder accessory injection mold. This set of mold is a set of large nozzle mold. The mold adopts 1+1 alignment, and the PL surface of the product is staggered. Pay attention to the design of the pipe insertion position. The mold is designed with four o degree side locks to improve the life and accuracy of the mold
-
For turbine products, in recent years, many injection molds have been opened for various turbine products. It is difficult for many designers to mold turbine products due to the abnormal features of their fan blades. Many online plans for residual drawings are also unreliable. This complete set of reference drawings can provide useful reference value
-
Design a complete set of injection mold for the plug. By analyzing its external shape, structure and size, as well as the output of products and the technological performance of plastic raw materials, a more detailed and reasonable plan was made for the parting surface and cavity arrangement of the mold. It was decided to adopt the arrangement mode of one mold with eight cavities. The parting surface was designed as a single parting surface, and the side gate was selected in the gate selection
-
This is a relatively simple injection mold for beginners to understand and learn the mold structure. The mold is a large water port 2 plate mold structure. The mold is arranged in 1 * 4 rows. The product material is PC transparent, and the front and rear internal molds are inlaid with S136H internal molds
-
A set of 1 out of 4 cross bridge bending injection mold. The product is a bridge bend, shaped like an arch bridge. The function of the arch bridge is that there are pipes passing under the arch, and the two ends of the product are connecting pipes. Because of the influence of the internal arch shape of the product, the mold structure is more complex. The usual core pulling structure is unable to extract the arch core. Then, the material is PPR, and the molding temperature is high. The mold core must be cooled by water, which also poses a higher challenge to the mold structure. The mold solves the problem of arch core pulling, and the inner running water of the core is cooled. The mold core is divided into two parts, a straight core and an inclined core. The straight core is installed on the main slider, and the inclined core small slider is distributed
-
A set of injection mold drawings for the outer frame of the automobile display screen, in which the front mold spring block is pressed back with the parting surface when closing the mold with a spring, the mold core is inlaid, the heat shield is clamped between the plates, the single nozzle hot runner, the balance block, the calculator, the dust shield are available, and can be edited without parameters. Welcome to download
-
Internal and external thread mould. This set of mold internal and external thread mold, the external thread uses the line position to exit the mold, and the internal thread uses the oil cylinder to drive the gear screw to exit the mold. The runner design, ejection design, and reset design are all in place. Welcome to learn and download
-
The injection mold for the automobile instrument bracket includes the upper mold cavity, the lower mold cavity, the core pulling before the mold, the core pulling behind the mold, and the core pulling belt with three mandrels. The instrument bracket is made of ABS material, and the mold has a cavity structure with a format of stp
-
This is the design drawing of the injection mold for the inner shell at the bottom of a washing machine. The difficulty of the product is that the side thread design uses the side automatic thread release mechanism of the hydraulic press, so the mold structure is complex. This document provides a good reference
-
The shell injection mold of a head massager is made of PC material with two cavities from one mold. Because of the high product precision requirements and high appearance requirements, imported steel material is specially used. The internal oblique ejection mold can be downloaded for learning, only for learning. Thank you for your support
-
This is the injection mold drawing of the high-end loudspeaker shell. The outlet mold has two holes, the guide sleeve is made of bronze and graphite, the mold is straight body mold, the cold runner of the second plate mold is submerged with glue, the cold pump nozzle, the needle plate return has switch induction, the four sides have side lock positioning, and a top bar. The drawing file is UG8.5, editable without parameters, for reference only, welcome to download
-
Toy product chair panel product, material ABS, panel feature modeling is very irregular curved surface, 1 mold out 4 products, cold runner glue, mold size 350X400, exported abroad, luxury mold making, equipped with balance block, switch, counter
-
This product is the counterpart of the central control framework. It is installed on the side of the framework. The product is 1+1 arranged. The size of the product is 828.2X142.1X372.0. It belongs to a medium and large mold. The product is fed through a three-point hot runner. The mechanism is relatively complex,. This mold has complete structure and standard parts, which are only for reference and learning
-
This drawing file contains all the structures of an arc core pulling injection mold for a sprinkler nozzle, including the mold core and the entire mold base. Including product drawing files, the mold structure is relatively complex, including a full set of structures such as the ejection mechanism, waterway, gating system, etc. The drawings can be edited, many of which have good reference significance for injection mold design
-
This drawing file contains all the structures of a set of injection mold for the rear cup holder frame of Mercedes Benz, including the mold core and the entire mold base. Including product drawing files, the mold structure is relatively complex, including a full set of structures such as the ejection mechanism, waterway, and gating system, and the drawings can be edited, Many of these structures have good reference significance for injection mold design. The drawing file is the assembly file, the file with the shortest file name is the guide file. This mold feature: because of the long core pulling distance, the hydraulic cylinder core pulling method is used
