-
Standard J30J-100ZKWP7-J connector model, solidworks 2015 drawing, all characteristic parameters can be edited and modified, including STP file, welcome to download if you need it
-
Six imported 1-2303816-2TE connectors are made of iron chrome plated parts, and their main function is the parallel connection between tubes. It is used in pipe support appliances. For your reference. Welcome to download and learn
-
The starter crankshaft connector assembly (gear drive system) adopts a reduction device. A reduction gear is installed between the rotor and the starting gear, and the torque transmitted by the starting motor to the starting gear will increase. With the electromagnetic switch, the power output of the motor (after the reduction gear) is the starting gear and the starting gear shaft, while the meshing part does not move. The starter with small output power usually adopts external meshing mode, while the starter with large output power adopts internal meshing mode
-
AVIC Optoelectronics J599-26KF18PCFN-01 connector plug, a military product, with a single core maximum sustainable current of 5A, and built-in high-speed signal transmission interface, can meet both power and communication requirements through the same plug
-
Multi station connector pin testing equipment, automatic equipment for product function testing equipment to detect the contact between the cylinder driven probe and the product pin. The workers manually operate the feeding, and the equipment is automatically detected and controlled by PLC. The manipulator performs fully automatic blanking
-
HMK70x4+20P16A-F_G-BK-CV is a male connector, and the corresponding female connector model is HMK70x4+20P16A-M-M40, which is used for the primary and secondary connection of power electronic products
-
The connector is a necessary element for series and parallel connection between battery packs. When the battery packs are charged and discharged, the passage of large current will cause a thermal effect on the connector. When the temperature of the connector rises, exceeding the temperature of the battery pack, the temperature will be transmitted to the inside of the battery, thus affecting the stability of the battery. Therefore, it is a necessary condition for the connector to reach the characteristics of low temperature rise, The special connector for linked energy storage adopts the terminal technology with independent intellectual property rights of the company, which keeps the contact surface between the terminal and the pin in the optimal area, effectively reduces the contact resistance, reduces the over-current density, and reduces the current temperature rise; At the same time, the new appearance design will make multiple surfaces
-
The multi station turntable connector pin device has a tray module that automatically grabs and loads materials, then a positioning unit, a handling unit, and finally an insertion. A series of automatic devices are available. The file format is a universal x-t format. If you like it, you can download it for learning and exchange information
-
Screw feeding bottle cover oil motor, reamer demoulding, reamer pushing plate, 1 out of 2 reamer automatic demoulding, thread gauge mold design model This is a mold design model diagram for manufacturing thread gauge. As long as the thread gauge is an instrument used to detect whether the thread conforms to national standards, the overall structure design is very good and detailed
-
Special products, one end is externally threaded, and the shape is inverted. The master mold of the mold uses an oil cylinder to pull the rack, and then drives the gear to rotate the mold core to spin out the product thread. Two Haval sliders are shaped, and the male mold core uses spiral water spray for cooling. There are many structures, and the product has only one hole
-
One 8-point PP material bottle cap, a case of automatic production mold for reaming teeth! A method of using chain drive to remove teeth. This mold is a fine nozzle die for reaming. The push plate is used to prevent rotation and ejection, and then the umbrella top is used for ejection. I hope you will pay attention and support
-
The brake oil pipe tee joint mold has threads inside the product, the gear is fixed on the operating side, and is driven by an oil motor. First, the reamer is unscrewed and then the mold is opened. The rear mold is driven by a sliding block inclined guide pillar. The export mold, the insert mold, the mechanical ejection, the structure is correct, the production is stable, and can be edited without parameters. The drawing file UG8.5 is only for reference and learning. Welcome to download
-
The 3D structure of the internal thread Laifu line worm spiral thread mold, which is actually produced and processed in the factory, can be directly downloaded for material preparation processing. The screw tooth demoulding is to use the oil cylinder to drive the rack, and the mechanism is simple. If you are interested in it, you can download it
-
Thread rack core pulling, using the action of the oil cylinder, the rack drives the gear to move back and forth, so that the tooth can rotate forward and backward to complete the product demoulding. The mold is cold rubber mouth diving. This kind of product design needs to pay attention to the number of turns of the teeth, and the designed mold needs to be verified by simulation motion simulation, which is a thread mold worth learning
-
-
-
This equipment is an enterprise connector automatic packaging testing machine, which is also called connector, plug and socket. This equipment is mainly composed of rack, control system, camera visual inspection component, transplanting and conveying component, packaging film component and packaging component (including carrier tape packaging mechanism, upper adhesive tape packaging mechanism, carrier tape retracting mechanism). This model is exquisite and can be used for reference!
-
This equipment is an enterprise connector terminal cam contact machine. It automatically distributes materials through the vibrating disc, and the servo motor drives the cam to realize contact action. The folding module bends the terminal, and then presses the terminal into the plastic shell. This model is exquisite and can be used for reference!
-
The automatic connector assembly riveting equipment has complex structure and high reference value,. The products are supplied from the flow channel of the loading station, loaded into the carrier manually (each carrier is equipped with 4 PCS of products), and the equipment automatically completes loading and unloading assembly/welding, loading/riveting, automatic DC tapping, and automatic withdrawal of finished products/carrier reflow
-
The punching machine structure of automatic punching connector parts can realize automatic feeding and automatic blanking, which saves three to four workers compared with the original operation mode, thus reducing manual production. There are X axis and Y axis working at the same time. Friends in need can refer to this design
-
Automatic processing of drilling and milling of hardware connector: continuous transmission is carried out through the conveyor line, cylinders are set on the side for positioning, and the upper part is processed. The drawing has entities, and the drawing has entities. The structure is novel, and the internal structure is clear. Thank you for downloading
-
HARTING_M8 circular connector cable connector M8 circular connector is the composition structure of circular connector. Combined with power line and data line, it is characterized by reducing the occupation area and installation and cost, and is suitable for process automatic control and industrial applications, automation equipment, electronic equipment, electronic instruments and meters
-
Five kinds of APJ3275 series plug socket and connector Industrial plugs are simply connectors, one male and one female plug, and then they can be plugged into each other. Applicable places: mechanical equipment: food machinery, mobile electric welding machine, construction engineering: new factory (workshop reconstruction), subway, energy power generation (solar energy, wind energy, nuclear energy, refrigeration equipment: refrigerated containers (port authority) Wait
-
Accessories are 16PIN circular power signal connector, CMC series. It contains 4 power supply PINs and 12 signal PINs. The maximum voltage of the power supply is 600V, and the maximum current is 25A. The shell is made of metal. Thread fastening, high reliability
-
Four TPC-000112 area double wide connectors are used for power supply and TC. The connector is a part that our electronic engineering technicians often contact. Its function is very simple: to build a bridge of communication between blocked or isolated circuits in the circuit, so that the current can flow and the circuit can achieve the intended function. Model contains stp format
-
There are five kinds of 4-2306963-1 automobile connector cover models. The automobile connector is an electronic component. Build a bridge of communication between blocked or isolated circuits in the circuit, so that the current can flow and the circuit can achieve the intended function. The form and structure of automobile connector is ever-changing. It is mainly composed of four basic structural components, namely: contact, housing (depending on the variety), insulator, and accessories. It is also called sheath, connector and plastic shell in the industry
-
Four kinds of LED 12x-2-way plug connector models, various functional parts and various spare parts on automobiles are constantly developing towards intelligence, refinement and reliability, which also puts forward higher requirements for structural design, appearance design and materials of automobile connectors
-
Four kinds of APR3255 series - plug socket and connector models. Industrial plugs are simply connectors. Your suppliers and customers can connect to one male and one female plug respectively, and then plug them into each other. Applicable places, power generation equipment, construction projects: new factory (workshop reconstruction) subway, etc
-
6.0mm spacing 2pin waterproof connector shell Connector type: female terminal shell butt joint male end width: 1.5mm [. 059in] Connector system: line to board, line to line, line to equipment NumberofPositions: 2 center line (spacing): 6mm [. 236in]
-
This is an industrial connector automatic needle inserting machine. The model uses 12 cylinders plus three servo motors for operation, and there are three belt conveyors, which are driven by three speed regulating motors. The original file is SolidWorks 2017. In addition, there are IGS and STEP neutral 3D files, which can be opened with SolidWorks 2017 and any other 3D software. The original file can be edited, including parameters
-
There are four horizontal connector models of profile connectors. Its style and structure are mostly rectangular plates, multilateral plates, profiled plates, etc., and the types generally include corner brace connecting plates, tie bar connecting plates, water level bracing connecting plates, and column bracing connecting plates
-
Five 5511 type BSPT threaded connectors, models equipped with nitrile rubber gaskets, models of imported BENEINOX models, hoping to help automation friends, can be directly fastened to the support, models include five models of different sizes
-
The overall carrier is the connector and the circuit board. The welding between the circuit board and the connector is required. The overall carrier is an automated production line, so the carrier is required to transport the products. Two products are placed on one carrier. The products are precisely positioned by positioning blocks. Stainless steel track bars are designed at both ends, which are not worn
-
There are 8 types of connector clip models for the edge. The edge connector is a cost saving device because it only needs a discrete female connector. They are usually used in computers, such as expansion slots, peripheral cards of PCI, PCI Express, and AGP cards
-
The fixture for the front and back spring pieces of the connector is mainly composed of locating the lower die, bending the upper die, die base, workbench, C-type manual bending frame, etc. The anti rebound positioning mechanism is set on the side, and the spring pieces on the other side can be bent by replacing the lower positioning die
-
The three station clamping and handling mechanism of the connector and the three station clamping and handling mechanism of the connector complete the material clamping through the clamping cylinder, and complete the overall 0-180 degree rotation through the rotation of the synchronous pulley. The file is in x_t general format, including parameters, which can be edited. Welcome to download
-
Electronic connector CCD camera detection equipment. The purpose of this equipment is mainly to load the connector, automatically grab it to each positioning seat and clamp it. The camera takes pictures of the product, grabs the contour of the connector, clamps it through a linkage mechanism, and then collects the material through the coiling and receiving mechanism
-
The multi station press fitting equipment for connector joint makes the product slide smoothly and enter the area to be handled. The cylinder transports forward intermittently. After secondary positioning, the cylinder transports to the assembly position intermittently. Finally, the transportation is completed. It is a complete conveying mechanism. Welcome to download
-
Intermittent circular conveying equipment with connectors is suitable for the efficient transportation of a large number of slender plate parts with steps. The structure of this device is relatively complex. The use of connecting rods and cams is a good learning material for mechanisms. Welcome to download it
-
This is a parent seat of HDMI welding wire for wire material. I made mapping with reference to the sample, and the position of welding points is very accurate, and the model is accurate and available. Friends in need can use it directly. Note: The mother seat of welding wire is different from that of welding plate, so it can not be mixed. Please pay attention when using
