-
The LCD display model of electronic products (MP4) is composed of several display units (unit display board or unit display box) that can be combined and spliced to form a screen body, plus a set of appropriate controllers (main control board or control system). Therefore, various specifications of display boards (or unit boxes) can be combined with controllers of different control technologies to form many kinds of LED displays to meet the needs of different environments and display requirements
-
Drawing introduction: It is designed by Solidworks. Apple watches and mobile phones expand the electronic product model. Apple phones and iPads have turned into arcades in first tier cities. At that time, many people wondered why someone would pay so much money to buy a mobile phone. All mechanical control model fans, welcome to download
-
Double layer transplanting electronic product belt conveying: as the conveying device of electronic products, double layer conveying is adopted to realize conveying and side shifting. The drawing is fine and the structure is novel, which can be modified, and can be used as a reference for mechanical design students
-
This mechanism is a small screw and nut implant mechanism for electronic products, with high reference value. The drawing file is a solidworks file. It can be opened after installing solidworks 2016 and above, and the STEP file and X-T file are attached. Welcome to download
-
The beauty and health care electronic product has the function of grinding wheel for skin grinding. Its structure is designed to be the combination of front and rear shells plus decorative parts and screws. This product has been launched. With electronic hardware stack, it is an ideal learning material. The document contains all drawings. If you are interested, you can download the complete drawings designed by yourself for the company. This product has a patent application, which can be learned but not used for commercial purposes. You can share your own drawings, and hope to get your views and insights
-
This picture shows the recycling equipment of carton electronic products in the community, with the appearance size of 1100 * 600 * 2150mm; At the same time, it has three recycling functions: recycling waste plastics+pop can+electronic products. The plastic product recycling system is fully equipped with shearing and extrusion technology, and fully automatic induction operation; Anti extrusion safety system; Backstage Internet transmission technology, the function of prompt when the material is full, 50kg for each package; A 30kg pop can is packed, and a side electronic product recycling device is provided; Two side video media or two side box media advertising is available. The sealed design prevents the scavengers from taking away the recycled materials inside
-
This model is an automatic non-standard electronic product feeding transmission mechanism. This model is used on the automation equipment and is directly installed on the equipment floor. The sensor detects and then the cylinder is pushed to the next station. The design of the model is very detailed. You can download it for reference. The belt is equipped with an adjusting tension mechanism. Welcome to download it
-
The mold drawing is a plastic part of an electronic product shell, 1 * 1, which uses a fine nozzle to feed glue. There are side holes in the direction of the front mold of the product. The current mold structure uses the front mold row position, and the last ejector pin ejects the product. The return of the ejector plate is ensured by the forced pull back mechanism and the travel switch. The drawing file has a clear structure, which can be used for reference
-
The mold drawing is a plastic part of an electronic product cover, 1 out of 1, with hot runner for glue injection. There is an undercut in the front mold direction of the product. The current mold adopts the front mold oblique jacking, and the side undercut in the rear mold direction of the product adopts the rear mold line position, and the final ejector pin ejects the product. The return of the ejector plate depends on the forced pull back mechanism to ensure the return of the ejector plate. The drawing file structure is clear and can be used for reference
-
A plastic mold drawing of an electronic product panel, the drawing file format is UG10.0. The mold structure adopts two plate mold, the large water inlet turns to submersible rubber feeding, the side core pulling mechanism has two large sliders, and there are several inclined ejecting molds inside, and the ejecting structure relies on the ejector pin and the ejector sleeve
-
7-segment display (electronic product) design model (display) is also commonly referred to as monitor. The monitor is an I/O device belonging to the computer, that is, an I/O device. It is a display tool that displays certain electronic files on the screen through a specific transmission device and then reflects them to the human eye. It does not contain parameters, but can be edited. It can be opened with SOLIDWORKS 2010, and draw good learning materials
-
-
-
UG11.0 injection mold, the product is an industrial electronic product shell. It adopts the design of two plate dies and four cavities, including slider ejector and other mechanisms. The die design is reasonable and has wide application. The model contains all parameters, which can be edited. Welcome to download and exchange learning
-
The 3d reference for the structural design model of electronic product tablet computer is not particularly complicated, and is very helpful for beginners of electronic product structural design. The actual combat model is worthy of reference. The structure design of electronic products is stacked in detail, and the design of rear shell snap is worth reference
-
A plastic mold drawing of electronic product's built-in parts, file in UG10.0 format, welcome to download and learn! One mold has four holes, and the three plate mold is used to inject glue through the fine nozzle. The deep inner cylinder uses a whole push plate to eject the product, and there is no ejecting inside
-
Micro electronic product inspection table This is used for tape weaving inspection of micro electronic devices. The loading and unloading are all tape weaving, and the inspection is carried out through VISION inspection. The 3D model is designed by SW software, with reasonable structure and source file sharing
-
The equipment for melting and planting nails in the plastic shell of electronic products: the lower part is equipped with a clamp to place the products, and the upper part is equipped with a hot melt head to press down. Its shape is beautiful and smooth, its structure is novel, and it can be modified. The novel shape is a rare masterpiece
-
Spot welding equipment for electronic products of continuous conveyor line: conveyor line is set for electronic products, and spot welding multi-point welding is set on the upper part, including digital analog in the middle format. Its shape is beautiful and its curve is smooth, and it adopts the physical representation. Welcome to download and use it, and it cannot be used for commercial purposes
-
Varistor is a kind of resistance device with nonlinear volt ampere characteristics, which is mainly used to embed voltage when the circuit is under overvoltage, absorb excess current to protect the sensitive device. The resistance body material of the varistor is semiconductor, so it is a variety of semiconductor resistors. The production process of the varistor involves the drying process, and it needs to apply a higher temperature to the varistor to dry it. However, currently known devices need to remove the whole cage from the furnace when taking materials, so first reduce the temperature in the furnace to room temperature, The furnace body cannot work continuously. In order to avoid the above problems, we have designed an electronic product resistor
-
The detection range of the visual inspection machine for the peripheral dimensions of the product: 28.724 ± 0.05 (FAI23) 25.679 ± 0.05 (FAI25) or more Repetition accuracy: ± 0.0054, 2 ＃ CCD (top part): the camera moves three sections driven by the linear module, detection: 0.00+0.15/- 0 (FAI20), Repetition accuracy: ± 0.005
-
Electronic product lifting, traversing and overturning gripper: electronic products are online through the conveyor line, and can be lifted, traversed and overturned after the front is clamped. The drawing is fine, the structure is novel, and can be modified, which can be used as a reference for mechanical design students
-
A plastic mold for the bottom cover of the PTZ camera of an electronic product, one mold with two holes, is installed at the bottom after the product is assembled, and the back glue needs to be pasted, so the form of three plate mold point glue injection is adopted! Full 3D image file in UG7.5 format, welcome to download and learn
-
The reset button plastic mold is a plastic mold used to make the reset button. The mold adopts a special design, which can ensure a stable structure under high temperature and pressure, and has good sealing performance. The reset button rubber mold has good precision and stability, which can ensure the quality and haze of the product. At the same time, the mold also has good corrosion resistance and weather resistance, and can be used in harsh environments
-
Automatic multi label pasting equipment for electronic product panel: use a manipulator to move the product and paste it through the side mechanism. The drawing has entities, and the drawing has entities. The structure is novel and the internal structure is clear. Thank you for downloading
-
Equipment for pasting protective film on the surface of electronic products: this equipment is used in the last process of products. The process of pasting protective film on the processed products is to ensure that the products will not be bruised during stacking and transportation. The upload format is XT
-
The product is an electronic product, and the core pulling distance is long, so the cylinder core pulling is adopted. Since there is a buckle position inside the product, it is necessary to make another interior position on the row position of the total core pulling, that is, the row position inside the row position. When opening the mold of AB plate, it drives the inner row position to hold off the buckle position for reverse screwing, and finally the oil cylinder pulls out the head row position so that the product can fall off smoothly
-
This model is an integrated machine for cutting and bending electronic product pins. It is fully automated and has two functions: bending and cutting. The power source is servo motor driven by cylinder, which is a very good reference structure. This structure is of great reference value. Welcome to download
-
yes electronic product What should be paid attention to when dispensing glue?
What should we pay attention to when dispensing electronic products? With the development of industrialization and the demand of the market, dispensing machines can now dispense in many fields, the most common of which are communication electronics, LED lighting, white goods, automotive electronics and other related fields. Dispensing methods vary greatly in the application of dispensing machines in different fields. So, what should we pay attention to when dispensing some electronic products?
-
Multi station electronic product solder dispensing equipment, a very mature and stable equipment in the electronic industry, contains a very classic mechanism device, a graduated turntable structure, a number of suction robots to grab and place the product, the tooling plate integrates matrix feeding to the original, which is very efficient, automatic assembly and welding, automatic glue dispensing and baking equipment, It is worth learning and reference for engineers
-
It is mainly used for the magnetic circuit components of the sound generating unit products in the 3C industry. It has high efficiency and is suitable for mass production. With a spring mechanism, it can effectively control the hot melt pressure of each product. The pressure is given by the cylinder, or it can be changed to the electric cylinder control. The effect is better. The temperature can be controlled at will, and the maintenance is convenient. The product is simple to change, and the cost is low. 3D is drawn by cero, and is in STP format
-
It is used for the display of electronic products. The display board is made of aluminum plate. According to the size of the display electronic components, the layout and installation holes are made. The upper panel is provided with a handle for easy display removal. The bottom surface is provided with anchor, which is used to fix and adjust the height and level. The display board structure is installed in the finished waterproof box. There are STP format files in the file, which are suitable for opening various mechanical software
-
some electronic product Warehouse water supply and drainage, HVAC drawings
This drawing is the water supply and drainage and HVAC drawing of an electronic product warehouse, including the fire hydrant plan of 1 # electronic product distribution center, the spray plan of 1 # electronic product distribution center, the roof ventilation plan of 1 # distribution center, etc. The drawing is detailed and can be downloaded for reference.
-
The high-end amplifier (electronic product) design model is a device that can amplify the voltage or power of the input signal, which is composed of electronic tubes or transistors, power transformers and other electrical components. It is used in communication, broadcasting, radar, television, automatic control and other devices. Principle: High frequency power amplifier is used for the final stage of transmitter to amplify the power of high-frequency modulated signal to meet the requirements of transmission power, and then radiate it into space through the antenna, so as to ensure that the receiver in a certain area can receive a satisfactory signal level and not interfere with the communication of adjacent channels. (SW2010 drawing, excluding parameters
-
The product is an electronic part, made of PP material, with one out of one row of molds. As a result, there are front mold inclined jacking core pulling, rear mold cylinder inclined tunnel sliding block, and single point open valve pouring. This mold has complete structure and standard parts, and interested friends can refer to it
-
Design of button key spring assembly equipment for electronic products: the upload model is designed for an automatic assembly equipment, and the assembled product is a key for electronic lamp switch. A small reset spring is pressed into the product. Welcome to download and use, and the upload format is X-T
-
External frame design of stand-alone equipment for non-standard electronic product assembly: this equipment frame can be used as the general external frame reference template design of stand-alone assembly equipment, with electrical installation elements designed internally, two working windows designed with safety gratings to ensure the safety of operators, and upload the format X-T
-
-
Siemens voltage stabilizer model (English: voltage stabilizer) refers to a device designed to automatically maintain constant voltage in electronic engineering. A regulator may be a simple "feedforward" design or may contain a negative feedback control loop. The regulator may also use electromechanical mechanisms or electronic modules. According to different designs, the voltage regulator can be divided into DC voltage regulator and AC voltage regulator. The voltage regulator is often used in the power supply system. It works with rectifiers, electronic filters, etc. to provide a stable output voltage, such as the working voltage required by microprocessors and other components. In hand
-
The UAV modern electronic product 3D model, modern simple design, front camera and four rotating wings make the UAV fly more smoothly in the high altitude. The black appearance adds yellow embellishment, making the overall product more commercial and simple
