-
This machine is used for PH2.0 loose PIN square pin assembly and bending SMT type products. The bending mechanism is a new introduced mechanism with creative and innovative ideas and strong bending stability, which is very suitable for the reference study of popular bending type research. The mechanism has strong usability. The parts of each station are relatively sturdy and durable, and the product size P is applicable
-
This model is a dual D-SubMicroTCA connector model. D-SubMicroTCA connector is a common connector, which can be used in harsh environments and has passed the robustness test. The model is in step format, and general 3D software can be opened. Welcome to download
-
The model is the connector MICROSD finished product test fixture. A USB test method is characterized in that the USB test method comprises: selecting a selected test mode from several test modes; Establish a USB communication connection between a USB device and a test fixture; The test fixture generates a test trigger instruction for the selected test mode according to the selected test mode; Send the test trigger command to the USB device via the USB communication link; Verify the quality of products through program inspection. For reference only
-
A manual PCB welding 485 connector fixture, product positioning instructions: 1. Manually place PCB and 485 connectors on the fixture; 2. Press the pressing plate manually first, 3 weld the front manually, 4 turn over and then weld again
-
This drawing is an automatic assembly machine for connector pin crimping, bending and installing the rear plug. It is a three machine integration scheme for connector 2.0PH terminal pin crimping, bending and installing the rear plug. It can be disassembled and operated separately. The machine is stable. Each station is of conventional classic design. The drawings are comprehensive and complete. Welcome to download them!
-
A connector bending molding machine. The loose pin terminals have been assembled. This machine is used to bend the terminals for 90 degrees. Two rows of terminals are bent. After bending, a small plastic is installed. The vibrating plate is used for feeding. The front section of the product is put by hand. The optical fiber sensor moves the material. After feeding, it is bent. The rack drives the center of the circle to bend. The finished product is extremely stable after making, and the angle can be adjusted freely, The small plastic packaging is compact in structure and is classic and original. Drawn by solidworks 2012, the whole machine parts contain parameters, which can be freely edited for your reference
-
The USB11PIN connector strip cutting fixture uses air cylinder for feeding and cutting. The electric control part uses intermediate relay and time relay for control, which is compact and convenient. The file contains step, IGS, stl formats, and can be edited
-
This machine is an original drawing, which can be downloaded safely. This machine is a double row contact pin bending product of automobile connector. There is a product drawing in the 3D drawing. The machine design is generous and reasonable, the mechanism is flexible, and the sending end inserting end group and bending group are very skillful. The traditional bending mode design is changed. Most of the bending design is gear rack design, It takes up a lot of space and the plastic material is not well arranged. This bending design perfectly solves this problem. Besides, there are few parts, simple processing, convenient debugging, and excellent bending effect. The plastic material is easy to move and arrange, which is worth learning from
-
Multi station turntable connector pin equipment, respectively, has a tray module to automatically grab and load materials, then a positioning unit, a handling unit, and finally insert a series of automatic equipment. The file format is a common format x-t format. If you like it, you can download, learn, and communicate
-
Multi station connector pin testing equipment, automatic equipment for product function testing equipment to detect the contact between the cylinder driven probe and the product pin. The workers manually operate the feeding, and the equipment is automatically detected and controlled by PLC. The manipulator performs fully automatic blanking
-
The connector is a necessary element for series and parallel connection between the battery packs. When the battery packs are charged and discharged, the passage of large current will produce a thermal effect on the connector. When the temperature of the connector rises above the temperature of the battery pack, the temperature will be transmitted to the inside of the battery, thus affecting the stability of the battery. Therefore, it is a necessary condition for the connector to reach the characteristics of low temperature rise, The special connector for linked energy storage adopts the terminal technology with independent intellectual property rights of the company, which keeps the contact surface between the terminal and the pin in the optimal area, effectively reduces the contact resistance, reduces the over-current density, and reduces the current temperature rise; At the same time, the new appearance design will make multiple surfaces
-
HMK70x4+20P16A-F_G-BK-CV is a male connector, and the corresponding female connector model is HMK70x4+20P16A-M-M40, which is used for the primary and secondary connection of power electronic products
-
-
Six imported 1-2303816-2TE connectors are made of iron chrome plated parts, and their main function is the parallel connection between tubes. It is used in pipe support appliances. For your reference. Welcome to download and learn
-
Five types of TECONNE high pin digital connectors and AMP connectors are the connectors produced by TEConnectivity manufacturers, providing complete products and services for the wiring systems of various buildings. Including general format, welcome to download and learn
-
There are nine types of 7975-HAWLE-2000 connector models. The connector is a very compact device that uses stainless steel and rubber to make a component combination device to achieve the function of sealing and pressure bearing. During construction, there is no need to do any treatment on the pipe end. As long as the connector is sleeved on the two pipe ends to be connected and the side bolts are tightened, the clamping teeth will bite the surface of the pipe end to achieve limit fixation
-
The attachment refers to Amphenol's two core high-voltage connector, which has a secondary lock structure and high-voltage interlock function. The rated voltage meets 1000V, the protection grade is IP67, and the material is forged aluminum alloy; The material conforms to rohs, original value proportion, and can be directly applied to the design
-
Six 7974 Synflex connector (connector) models. The connector is a very compact device that uses stainless steel and rubber to make a component combination device to achieve the function of sealing and pressure bearing. During construction, there is no need to do any treatment on the pipe end, as long as the connector is sleeved on the two pipe ends to be connected, and the side bolts are tightened, the clamping teeth will bite the surface of the pipe end to achieve limit fixation
-
The design of this machine is simple and easy to understand. It is suitable for HDMI male tin product series. The best product is to add tin before no assembly of iron shells. In this way, the iron shells with high requirements are not easy to scratch, the structure is simple, the parts are few, and it is easy to disassemble and assemble, and the boot operator is also easy to use. It is worth learning for beginners. Multi aspect learning is the future trend
-
Connector multi station automatic clamping equipment and pneumatic clamping and handling mechanism can realize the use of two points in horizontal direction to transport products. The automatic loading and unloading mechanism of shaft products is realized. The model design format is clear, the design idea is clear, including assembly entities and parts entities, and the size and proportion are clear
-
This is a 3D model diagram of a wire bonding MicroUSB female head. The stainless steel shell of the microUSB is equipped with two convex bulges, which can be easily positioned or added with a sliding sleeve for locking the sheath during application, so that it is easier to realize the subsequent plastic coating injection molding process after wire bonding and reduce the defective failure loss in the production process
-
This product is a 3D drawing file that I actually measured and drew according to the drawings based on the samples provided by customers, including PRT components, ASM components and several pictures. It is not a true mold drawing, which is only for reference and learning. Welcome to download
-
The basic structure of circular right angle connector is a kind of connector with right angle cylinder and circular mating surface. This model has circular right angle connectors with different number of cores, which can adapt to different number of cores and has the function of reversing. It's not easy to collect. Welcome to download
-
The starter crankshaft connector assembly (gear drive system) adopts a reduction device. A reduction gear is installed between the rotor and the starting gear, and the torque transmitted by the starting motor to the starting gear will increase. With the electromagnetic switch, the power output of the motor (after the reduction gear) is the starting gear and the starting gear shaft, while the meshing part does not move. The starter with small output power usually adopts external meshing mode, while the starter with large output power adopts internal meshing mode
-
The new energy battery pack connector socket in the energy storage industry is used to design the battery pack. The positive and negative poles of the battery are output. It is provided by the digital analog manufacturer and does not support editing. The stp general format is convenient to open
-
AVIC Optoelectronics J599-26KF18PCFN-01 connector plug, a military product, with a single core maximum sustainable current of 5A, and built-in high-speed signal transmission interface, can meet both power and communication requirements through the same plug
-
Amphenol connector plug design model In various electronic systems of weapons and equipment, electrical connectors conduct electrical connection and signal transmission between devices, components and components, systems and systems, and are the basic components necessary to constitute a complete system. (SW2010 drawing, not including parameters, but editable model)
-
Suitable panel thickness: 1-8mm Panel opening size: 20.6mm One end is RJ45 network port, and the other end is PCBRJ45, which is a kind of information socket (i.e. communication outlet) connector in the wiring system. The connector consists of plug (connector, crystal head) and socket (module). The plug has 8 recesses and 8 contacts. RJ is the abbreviation of Registered Jack, which means "registered socket". In FCC (Federal Communications Commission Standards and Regulations), RJ is the interface describing public telecommunications network, and RJ45 of computer network is standard 8-bit modularization
-
Standard J30J-100ZKWP7-J connector model, solidworks 2015 drawing, all characteristic parameters can be edited and modified, including STP file, welcome to download if you need it
-
Dovetail riveting press on both sides of the iron shell connector: the equipment is used for riveting and pressing the dovetail on both sides of the iron shell connector. It is mainly used in the communication connector industry. The cylinder riveting mechanism and manual feeding device are used. The device design is simple and convenient, which can be used for reference, learning and downloading
-
Two core 280 high-voltage connector socket (2.5 square meters), suitable for all kinds of A, B class pure electric passenger vehicles and all kinds of pure electric commercial vehicles; It is used to control and connect various functional modules of the vehicle, such as: DC/DC: slow charging function, PTC to high-voltage control box, MCU
-
This equipment is an automatic riveting and pressing equipment for the iron shell of electronic connector. It mainly includes electric cabinet, feeding direct vibration platform, cam fast moving module, plastic pressing into the iron shell, front riveting of the iron shell, side riveting of the iron shell, touch screen, discharging direct vibration
-
Two core 280 high-voltage connector plug (2.5 square meters), suitable for all kinds of Class A, B pure electric passenger vehicles and all kinds of pure electric commercial vehicles; It is used to control and connect various functional modules of the vehicle, such as: DC/DC: slow charging function, PTC to high-voltage control box, MCU
-
Fully automatic assembly and production equipment for data line connector, which is an automatic production equipment integrating ring conveying mechanism, gravity selective conveying mechanism, brittle disc circulating conveying mechanism, incoming material grabbing mechanism, blanking mechanism and CCD detection mechanism, and can produce automatically
-
This set of drawings shares an automatic assembly and packaging production line for connectors. The connector body and PIN pin are automatically fed through the vibrating disk. After assembly, they are sent to the conveyor belt, then into the elevator, and finally into the packaging machine. Friends in need can download
-
1. Structure: the automatic detection equipment is mainly composed of incoming guide module, coplanarity&rubber column detection module, alignment detection module, gold needle detection module, defective product recovery module, overturning module, display control module, rack module, etc. 2. Function: detect the coplanarity, orthogonality and missing of silver needle and glass needle; Silver needle length; Missing and skewed rubber column; Whether the gold needle is exposed, shrunk and pressed in place, the front end is connected to the needle inserting machine, and the rear end is connected to the assembly line. 3. It has complete structure, stable function, and two kinds of universal products. It has been produced and participated in the exhibition, with a capacity of 40K/D. 4. The device is solidworks 2013 version
-
-
-
Automatic processing of drilling and milling of hardware connector: continuous transmission is carried out through the conveyor line, cylinders are set on the side for positioning, and the upper part is processed. The drawing has entities, and the drawing has entities. The structure is novel, and the internal structure is clear. Thank you for downloading
-
Accessories are 16PIN circular power signal connector, CMC series. It contains 4 power supply PINs and 12 signal PINs. The maximum voltage of the power supply is 600V, and the maximum current is 25A. The shell is made of metal. Thread fastening, high reliability
