-
The mold drawing is a plastic part of an electronic product shell, 1+1, which uses a fine nozzle to feed glue. There are side holes in the direction of the front mold of the product. The current mold structure uses the front mold row position, and the ejector pin ejects the product at last. The return of the ejector plate is ensured by the forced pull back mechanism and the travel switch. The drawing file has a clear structure, which can be used for reference
-
This mechanism is a small screw and nut implant mechanism for electronic products, with high reference value. The drawing file is a solidworks file, which can be opened after installing solidworks 2016 and above, with STEP file and X-T file attached. Welcome to download
-
The beauty and health care electronic product has the function of grinding wheel for skin grinding. Its structure is designed to be the combination of front and rear shells plus decorative parts and screws. This product has been launched. With electronic hardware stack, it is an ideal learning material. The document contains all drawings. If you are interested, you can download the complete drawings designed by yourself for the company. This product has a patent application, which can be learned but not used for commercial purposes. You can share your own drawings, and hope to get your views and insights
-
This model is an automatic non-standard electronic product feeding transmission mechanism. This model is used on the automation equipment and is directly installed on the equipment floor. The sensor detects and then the cylinder is pushed to the next station. The design of the model is very detailed. You can download it for reference. The belt is equipped with an adjusting tension mechanism. Welcome to download it
-
This is a set of three plate mold cold runner point glue injection mold. The product has a 1+1 row layout. The front mold has a tunnel row position. The row position adopts the method of removing inserts. The rear mold has no structure. The ejection method of this drawing is ejector pin ejection. The ejector pin base plate is equipped with a travel return switch
-
-
MP3 player design model drawing of electronic products. MP3 is the memory of many people and has been used. It is a revolution from the bulky recorder in the early days to the compact MP3 player. This MP3 player was designed three years ago, small and generous, comfortable to handle
-
What we shared today is the design of a non-standard electronic product tray feeding assembly. This model is the tray feeding mechanism of the German automatic positioner put into production. The design of this model is very detailed. You can use its structure for reference to improve your design. The tray is sent to the designated position through the friction line. Model contains x-t format
-
This design is a design model diagram of an electronic product test rack, which is made of weldments and bakelite materials. The overall structural design of the model diagram drawn by this design is very good. You can download and learn the application of design ideas. It's a good model. Welcome to download and learn
-
Multi station electronic product solder dispensing equipment, a very mature and stable equipment in the electronic industry, contains a very classic mechanism device, a graduated turntable structure, a number of suction robots to grab and place the product, the tooling plate integrates matrix feeding to the original, which is very efficient, automatic assembly and welding, automatic glue dispensing and baking equipment, It is worth learning and reference for engineers
-
The mold drawing is a plastic part of an electronic product cover, 1 out of 1, with hot runner for glue injection. There is an undercut in the front mold direction of the product. The current mold adopts the front mold oblique jacking, and the side undercut in the rear mold direction of the product adopts the rear mold line position, and the final ejector pin ejects the product. The return of the ejector plate depends on the forced pull back mechanism to ensure the return of the ejector plate. The drawing file structure is clear and can be used for reference
-
It is mainly used for the magnetic circuit components of the sound generating unit products in the 3C industry. It has high efficiency and is suitable for mass production. With a spring mechanism, it can effectively control the hot melt pressure of each product. The pressure is given by the cylinder, or it can be changed to the electric cylinder control. The effect is better. The temperature can be controlled at will, and the maintenance is convenient. The product is simple to change, and the cost is low. 3D is drawn by cero, and is in STP format
-
some electronic product Warehouse water supply and drainage, HVAC drawings
This drawing is the water supply and drainage and HVAC drawing of an electronic product warehouse, including the fire hydrant plan of 1 # electronic product distribution center, the spray plan of 1 # electronic product distribution center, the roof ventilation plan of 1 # distribution center, etc. The drawing is detailed and can be downloaded for reference.
-
yes electronic product What should be paid attention to when dispensing glue?
What should we pay attention to when dispensing electronic products? With the development of industrialization and the demand of the market, dispensing machines can now dispense in many fields, the most common of which are communication electronics, LED lighting, white goods, automotive electronics and other related fields. Dispensing methods vary greatly in the application of dispensing machines in different fields. So, what should we pay attention to when dispensing some electronic products?
-
The equipment for melting and planting nails in the plastic shell of electronic products: the lower part is equipped with a clamp to place the products, and the upper part is equipped with a hot melt head to press down. Its shape is beautiful and smooth, its structure is novel, and it can be modified. The novel shape is a rare masterpiece
-
Varistor is a kind of resistance device with nonlinear volt ampere characteristics, which is mainly used to embed voltage when the circuit is under overvoltage, absorb excess current to protect the sensitive device. The resistance body material of the varistor is semiconductor, so it is a variety of semiconductor resistors. The production process of the varistor involves the drying process, and it needs to apply a higher temperature to the varistor to dry it. However, currently known devices need to remove the whole cage from the furnace when taking materials, so first reduce the temperature in the furnace to room temperature, The furnace body cannot work continuously. In order to avoid the above problems, we have designed an electronic product resistor
-
Electronic product lifting, traversing and overturning gripper: electronic products are online through the conveyor line, and can be lifted, traversed and overturned after the front is clamped. The drawing is fine, the structure is novel, and can be modified, which can be used as a reference for mechanical design students
-
The detection range of the visual inspection machine for the peripheral dimensions of the product: 28.724 ± 0.05 (FAI23) 25.679 ± 0.05 (FAI25) or more Repetition accuracy: ± 0.0054, 2 ＃ CCD (top part): the camera moves three sections driven by the linear module, detection: 0.00+0.15/- 0 (FAI20), Repetition accuracy: ± 0.005
-
The mold drawing is a plastic part of an electronic product shell, 1 * 1, which uses a fine nozzle to feed glue. There are side holes in the direction of the front mold of the product. The current mold structure uses the front mold row position, and the last ejector pin ejects the product. The return of the ejector plate is ensured by the forced pull back mechanism and the travel switch. The drawing file has a clear structure, which can be used for reference
-
Equipment for pasting protective film on the surface of electronic products: this equipment is used in the last process of products. The process of pasting protective film on the processed products is to ensure that the products will not be bruised during stacking and transportation. The upload format is XT
-
The product is an electronic product, and the core pulling distance is long, so the cylinder core pulling is adopted. Since there is a buckle position inside the product, it is necessary to make another interior position on the row position of the total core pulling, that is, the row position inside the row position. When opening the mold of AB plate, it drives the inner row position to hold off the buckle position for reverse screwing, and finally the oil cylinder pulls out the head row position so that the product can fall off smoothly
-
A plastic mold for the bottom cover of the PTZ camera of an electronic product, one mold with two holes, is installed at the bottom after the product is assembled, and the back glue needs to be pasted, so the form of three plate mold point glue injection is adopted! Full 3D image file in UG7.5 format, welcome to download and learn
-
The reset button plastic mold is a plastic mold used to make the reset button. The mold adopts a special design, which can ensure a stable structure under high temperature and pressure, and has good sealing performance. The reset button rubber mold has good precision and stability, which can ensure the quality and haze of the product. At the same time, the mold also has good corrosion resistance and weather resistance, and can be used in harsh environments
-
Automatic multi label pasting equipment for electronic product panel: use a manipulator to move the product and paste it through the side mechanism. The drawing has entities, and the drawing has entities. The structure is novel and the internal structure is clear. Thank you for downloading
-
Spot welding equipment for electronic products of continuous conveyor line: conveyor line is set for electronic products, and spot welding multi-point welding is set on the upper part, including digital analog in the middle format. Its shape is beautiful and its curve is smooth, and it adopts the physical representation. Welcome to download and use it, and it cannot be used for commercial purposes
-
This model is an integrated machine for cutting and bending electronic product pins. It is fully automated and has two functions: bending and cutting. The power source is servo motor driven by cylinder, which is a very good reference structure. This structure is of great reference value. Welcome to download
-
It is used for the display of electronic products. The display board is made of aluminum plate. According to the size of the display electronic components, the layout and installation holes are made. The upper panel is provided with a handle for easy display removal. The bottom surface is provided with anchor, which is used to fix and adjust the height and level. The display board structure is installed in the finished waterproof box. There are STP format files in the file, which are suitable for opening various mechanical software
-
7-segment display (electronic product) design model (display) is also commonly referred to as monitor. The monitor is an I/O device belonging to the computer, that is, an I/O device. It is a display tool that displays certain electronic files on the screen through a specific transmission device and then reflects them to the human eye. It does not contain parameters, but can be edited. It can be opened with SOLIDWORKS 2010, and draw good learning materials
-
Gluing and curing equipment for touch screen of electronic products: It is reproduced by manipulator, scrubbed by scrubbing equipment, and finally coated and cured. Its shape is beautiful and smooth, its structure is novel, and it can be modified. It is a rare masterpiece with novel shape
-
Semi automatic laser engraving equipment for electronic products. This drawing is a double station laser engraving manipulator used for loading and unloading, automatic material switching, high efficiency, safety and reliability. Laser laser engraving machine is a kind of laser beam used to make permanent marks on the surface of various materials. The effect of marking is to expose deep substances through evaporation of surface substances, or chemical and physical changes of surface substances caused by light energy
-
-
-
Electronic product cooperation robot unpacking and sealing machine: it is an automatic packaging equipment, which is used to take electronic products out of the box and seal the box. It adopts the technology of cooperative robot, which can realize the function of working with people and improve the production efficiency and safety.
-
Belt conveying mechanism for small electronic products: the belt line uses aluminum profiles as the main frame, the middle of the belt uses steel plates as the bearing slide, and the belt uses synchronous wheels as the transmission mechanism. Its shape curve is smooth and its shape is novel, which is a rare masterpiece
-
Sealing dispensing equipment electronic product Apply on
China is a major producer and exporter of electronic products. Electronic manufacturing is mainly distributed in the southeast coastal areas of China, which is also a pillar industry in the coastal areas of China. Because of the abundant labor force in China, the electronic production has taken the lead in the world, and the electronic industry has also made great achievements. However, with the development of electronic and mechanical automation, the speed of manual manufacturing is far from enough to compensate for the underdevelopment of automation, especially in areas with a lack of population, There is an extremely unbalanced phenomenon in the production and development of electronic industry in China.
-
electronic product How to complete the dust-proof and waterproof sealing of the shell
As many electronic products have many types of styles, users can consider using automatic dispensing machine to complete this special gluing requirement when producing some shells. What is the effect of using automatic dispensing equipment to glue electronic shells? Including whether it can effectively meet the general needs of production or how about the performance of the machine in terms of gluing effect and efficiency? Today, Xiaobian will take you to have a deep understanding of the gluing effect of the equipment.
-
Plastic mold drawing of an electronic product panel, the drawing file format is UG10.0. The mold structure adopts two plate mold, the large water inlet turns to submersible rubber feeding, the side core pulling mechanism has two large sliders, and there are several inclined ejecting molds inside, and the ejecting structure relies on the ejector pin and the ejector sleeve
-
UG11.0 injection mold, the product is an industrial electronic product shell. It adopts the design of two plate dies and four cavities, including slider ejector and other mechanisms. The die design is reasonable and has wide application. The model contains all parameters, which can be edited. Welcome to download and exchange learning
-
Eight position automatic rotation mechanism for electronic products is a divider mechanism. Eight position divider is designed. Each position rotates. The fixture is cylindrical, spring locked, with high precision and accurate positioning. Friends in need can download the reference, without parameters
-
Conveying belt for small electronic components: It uses small belts to transport through the aluminum guide rails on both sides. The modeling data in the middle format is smaller and can be modified. Welcome to download and use it
