Engineering database \ Road and bridge municipal administration \ Road and bridge construction design \ construction plan \ Construction Scheme of Expressway Subgrade Slope Protection along the River

Construction Scheme of Expressway Subgrade Slope Protection along the River

The starting point of the contract section A7 of Tongxin Haiyuan Highway from the provincial highway 103 to the contract section of Haiyuan Highway is K38+500, which is located behind Hejiabao Village, along Zhuangzishang and Miaoergou to Xinzhuang, and then through Wangjiajing, the toll station of the main line is set near Wangjiajing, then Wangjing Bridge is set to connect with Tonghai Road, and the main line with Tonghai Road is set at K46+600, after passing the level crossing, the toll station of the main line is set at the end point, and the old road of Tonghai is expanded along the old road of Tonghai. The end point is level crossing with Heihai Road, and the stake number of the end point of the project is K48+392.523. The total length of the route is 9.893 km.

Uploader: Upload time: 2021-07-02 15:05:04 Document format: docx Number of collections: zero the number of pages: sixteen Comments: zero Category label: Road and bridge municipal administration / Road and bridge construction design / construction plan

Click to download the source file

Detailed introduction Related recommendations Content comments

Detailed introduction

Construction Scheme of Expressway Subgrade Slope Protection Works along the River - Figure 1

Special statement: This material belongs to the sharing uploaded by users Downloaded content, only for learning, not for commercial use. If there is any copyright problem, please timely contact Station delete!

Collection

WeChat code scanning and sharing

Click to share

Related recommendations

Design Drawing of Diamond Grid Slope Protection for Expressway Subgrade
This data is the design drawing CAD of expressway subgrade diamond grid slope protection. The drawings include: front view of mortar rubble diamond grid slope protection, construction drawing design of pilot section, design drawings of subgrade retaining and protection works, etc. The design is accurate and detailed, which can be downloaded for reference by netizens.

Topic: Slope protection design of expressway Expressway shoulder Slope protection construction of expressway
Daily maintenance of subgrade, pavement, bridge and tunnel of expressway engineering construction programme
The total length is 139.5km, adopting the expressway technical standard, the subgrade width is 24.5m, the asphalt concrete pavement, two-way four lane, fully closed, fully overpass; There are 10 toll booths and overpasses, 15 double track tunnels, 1 management office and 2 service areas along the line

Topic: Construction Scheme of Tunnel Daily Maintenance Works Construction Scheme for Daily Maintenance of Expressway Construction Scheme for Subgrade and Pavement of Expressway
Mortar masonry protection for subgrade of secondary highway engineering construction programme
The contract section is located in Nanzhai Town, Qianyang County, with a total length of 21.45km and mileage of K23+265-K44+722. The type and quantity of protection works are: shoulder protection wall, face protection wall, arch skeleton slope protection arch ring, slope protection shoulder wall, embankment wall, etc. are all built with mortar rubble; C20 concrete shall be used for skeleton slope protection steps and prefabricated edge stones; Spraying grass planting is adopted in the arch skeleton. Specific quantity: 6287.721m? Mortar rubble; 186.266m? C20 concrete; 8542.96m2 spray seeding grass planting

Topic: Construction Scheme of Highway Subgrade Protection Works Construction scheme of mortar masonry protection works Construction Scheme of Masonry Works
Sand filling construction of subgrade of an expressway
In the first phase of the expressway project, a 12km high fill road base fell on the ancient river channel on the south side of the Hutuo River and the yoke bend formed by the flood. There was a large amount of alluvial fine sand in the river channel, but there was no cohesive soil or other suitable filling materials in the short distance, which caused great difficulties in the subgrade filling. In addition to the permanent occupation of a large amount of land resources, the construction of expressways also requires a large amount of cultivated land for high fill subgrade borrowing. For a country with a small per capita area of cultivated land, such as China, it does bring many problems that are detrimental to the country and people. How to occupy as little farmland as possible, save fertile land and save investment has become an important topic in highway construction. Sand soil has good water stability, strong water permeability, fast settlement, easy compaction when saturated with water, and small capillary rise height, so it is a good subgrade filling material. Road construction and subgrade filling with river sand in the beach sandy soil section of inland China can not only dredge the river channel, but also occupy less arable land, use local materials and reduce the cost. However, as filling material, sand is easy to slide and collapse after water loss, difficult to compact, and has poor dry stability. The advantages of the two materials can be brought into play by adopting the filling method of sand core, clay edge, and soil sand.

Topic: Construction Scheme for Subgrade Filling of Expressway Standard for subgrade of expressway Specifications for subgrade of expressway
Subgrade protection of high-speed railway engineering construction Operation Instructions
The mortar or concrete used must have mix ratio and strength test, and enough test pieces shall be reserved. The stone strength shall meet the design requirements. Mortar and concrete used for construction shall be mixed mechanically, and shall not be mixed manually directly on the masonry surface or road surface, but shall be mixed and used immediately.

Topic: Operation Instruction for Engineering Survey Railway Tunnel Standardization Operation Instruction Operation Instruction for Construction of Tunnel Cable Tray Cover
Liaoning Expressway Subgrade engineering construction organization design
This contract section starts from xx Village, xx Street, the north of XX City, and connects with 201 National Highway. The starting point of the connecting line is K0+000, and it crosses XX Expressway (K144+200) at K1+500, and finally ends at Lamatun K9+000.000, Guangming Mountain Town. The line passes through xx street of XX city and Guangmingshan Town, crossing XX expressway, township road Nuanping Line, G305 National Highway, and crossing xx River and Xiaosi River.

Topic: Construction organization design of highway subgrade works Construction scheme for subgrade works of expressway Contract for subgrade works of expressway
Subgrade of an expressway in Liaoning Province engineering construction organization design
This contract section starts from xx Village, xx Street, the north of XX City, and connects with 201 National Highway. The starting point of the connecting line is K0+000, and it crosses XX Expressway (K144+200) at K1+500, and finally ends at Lamatun K9+000.000, Guangming Mountain Town. The line passes through xx street of XX city and Guangmingshan Town, crossing XX expressway, township road Nuanping Line, G305 National Highway, and crossing xx River and Xiaosi River.

Topic: Construction organization design of highway subgrade works Construction scheme for subgrade works of expressway Contract for subgrade works of expressway
Expressway subgrade engineering construction Technical Guidelines for Standardization
In order to standardize the construction management of Qilu Transport Development Group Co., Ltd. subgrade works, implement the five development concepts and build "four transportation", improve the image of project construction, build green roads, create quality projects, cultivate project construction culture, and shape the management brand of Qilu Transport Engineering Construction, this guide is prepared in combination with the actual situation of highway subgrade construction

Topic: Standardized construction of highway subgrade Technical guide for standardized construction of expressway Technical Guide for Highway Subgrade Construction
Design Drawing of Highway Subgrade Retaining and Protection Works
This data is the design drawing of highway subgrade retaining and protection works, which includes the first floor plan, the second floor plan, design instructions, etc., for reference only

Topic: Protective works Highway subgrade slope protection Design Drawing of Highway Pavement
Subgrade slope protection in filling section engineering construction programme
According to the overall construction plan, the Project Management Department actively carried out mobilization preparation before commencement. The subgrade filling has been completed, and the slope has been trimmed according to the design requirements. The construction site has been leveled, engineering and technical personnel, labor, construction machinery and tools, sand, cement, etc. have entered the site, and protective measures have been taken for raw materials, such as: cement is stored on the platform, kept dry, the surface is covered with waterproof cloth, and the sand and stone sites have been hardened and stacked according to specifications. 2. Surveying and setting out: the survey team has completed the resurvey of horizontal control points and leveling elevation points, recovered the central stake of the route, added stakes to control the protection location points of this section, and the construction benchmarks have been led near the slope protection. 3. The laboratory of the Material Test and Supply Report Center has completed the inspection of cement, sand, stone, water and other raw materials and the preparation of cement mortar mix ratio, all of which meet the design and specification requirements, and the material supply can meet the project needs.

Topic: Construction scheme of slope protection works Construction scheme of subgrade section works Construction Scheme of Highway Subgrade Protection Works
Safety technical disclosure of expressway protection works
The clearance size and plane position of the pile body shall be checked frequently during the process of digging piles. The deviation of the central axis of the hole shall not be greater than 5% of the hole depth, and the section size must meet the design requirements. The deviation of the plane position of the orifice from the design pile position shall not be greater than 5cm.

Topic: Expressway protection project contract Expressway safety technical disclosure Safety technical disclosure of protection works
Special construction scheme for subgrade works of an expressway
Natural zoning of highway: It is the principle of combining the comprehensiveness and dominance of natural climate factors. Based on the analysis of the actual relationship between natural comprehensive conditions and highway engineering, the leading signs with zoning significance are selected, and the zonal (latitude) and non zonal (altitude) differences of surface climate are noted. Make the characteristics of road construction in the same area similar.

Topic: Special construction scheme for subgrade of expressway Highway subgrade works Contract for subgrade works of expressway
Special construction organization design of expressway subgrade engineering
WXTJ-2 bid section of the expressway from XX to XX north section, AK0+000~AK1+204.657 section, with a total length of 1204.657m, 89420m3 of rock fill, 25800m3 of earth fill, 22% of earth rock ratio: 28%; The maximum filling depth is 9.985 m. The earth excavation is 16480 m3, and the maximum excavation depth is 4.678 m;.

Topic: Special Construction Contract for Expressway Subgrade Construction organization design of highway subgrade works Highway subgrade works
Subgrade, bridge and culvert of expressway engineering construction Organization design proposal
This document is the construction organization design proposal for the 6th bid of a highway subgrade, bridge and culvert project. It introduces the relevant technical bid format and construction technical plan content of the highway subgrade, bridge and culvert project bidding document. The content is detailed and can be used for reference.

Topic: Construction organization design of highway subgrade works Code for survey and design of highway, road, bridge and culvert Construction Scheme for Expressway Works in Rainy Season
Grouting protection of highway subgrade engineering construction Scheme, 10 pages in total
The contract section is located in Nanzhai Town, Qianyang County, with a total length of 21.45km and mileage of K23+265-K44+722. The type and quantity of protection works are: shoulder protection wall, face protection wall, arch skeleton slope protection arch ring, slope protection shoulder wall, embankment wall, etc. are all built with mortar rubble; C20 concrete shall be used for skeleton slope protection steps and prefabricated edge stones; Spraying grass planting is adopted in the arch skeleton. Specific quantity: 6287.721m3 mortar rubble; 186.266m3 C20 concrete; 8542.96m2 spray seeding grass planting

Topic: Construction Scheme of Highway Subgrade Protection Works Construction scheme of mortar masonry protection works Construction Scheme of Masonry Works
[Hubei] Subgrade protection and drainage of Mazhu Expressway engineering construction programme
6. Construction survey report. Including the construction site and surrounding environmental conditions, water, electricity, roads, temporary land lease and ground materials, hydrogeology, meteorology, transportation, machinery, material procurement and other data.

Topic: Construction Scheme for Subgrade Protection of Expressway Construction Scheme of Expressway Drainage Works Construction Scheme for Subgrade Protection and Drainage Works
Subgrade protection design drawing of a two-way four lane expressway in Guizhou (shoulder protection, foot protection, slope protection net)

Table of Quantities of Subgrade Protection Works Reinforced Concrete Crash Barrier Design Drawing Sheet Pile Wall Hanging Plate Structure Anti slide Pile Reinforcement Structure Drawing (Sheet Pile Wall) 2 Design Drawing of Sheet Pile Wall 2 Design Drawing of Oblique Embankment Wall 2 Design Drawing of Balance Weight Shoulder Wall Design Drawing of Oblique Cutting Wall Design Drawing of Stone Filling Subgrade Slope Masonry Design Drawing of Shrub Slope Protection Landscaping Design Drawing of Planting Vines Design Drawing of Active Protective Net

Topic: Shoulder protection subgrade Highway subgrade slope protection Highway subgrade design
Standard Drawing of Highway Subgrade Protection Engineering (CAD Version)
A relatively complete set of standard drawings of subgrade protection works, including balance weight shoulder wall, inclined cutting wall, etc., for designers' reference!

Topic: Highway subgrade slope protection Highway subgrade drawings Highway subgrade design
Construction Scheme for Overwet Soil of Expressway Subgrade
This paper introduces the method of improving the over wet soil with large natural water content and small CBR of Lewen Expressway through tests, and forms a complete set of construction technology of quicklime improved soil through the construction of the test section.

Topic: Construction Scheme for Expressway Works in Rainy Season Construction scheme for roadside pole foundation of expressway Expressway pavement construction contract
Construction scheme for subgrade surface cleaning of an expressway
The reconstruction and expansion project of Changchun Lalinhe Expressway starts from the northwest ring of the built Changchun Ring Expressway (i.e. the Changchun transit section of the Beijing Harbin Expressway), and connects with the southeast ring of Changchun Ring Expressway through the Xiaoxitun hub interchange. The starting stake is K993+464.549. The route ends at the bridgehead on the south bank of North Lalin River in Caijiagou Town, Fuyu City, and at the end of the existing Changyu Expressway, with a total length of 143.634km and a stake number of K1137+098.135.

Topic: Construction Scheme for Expressway Subgrade Surface Cleaning Standard for subgrade of expressway Specifications for subgrade of expressway
Subgrade construction of expressway filled with sand
In order to ensure the filling quality and progress of the subgrade, two filling schemes are adopted for the filling of the test section. （1） Synchronous construction method of sand and clay. During the construction of this scheme, the sand and clay are always in a relatively horizontal state. In fact, the paving and rolling of sand and clay are synchronized. There are two different construction methods for simultaneous construction of sand and clay. First, after the edge covering clay and sand core are paved at the same time, the edge covering soil shall be compacted first, and then the sand shall be compacted after the compaction degree is reached. The second is to pave clay and sand at the same time. First, stabilize the clay twice, press the sand core, and finally roll the clay and sand at the same time. This filling method is difficult to operate in practice. The optimal moisture content of the two materials is different, and the compaction degree requirements cannot be met at the same time. Therefore, the first method is used to fill the test section.

Topic: Key points of high-speed subgrade construction High speed subgrade construction contract Construction Scheme for High speed Subgrade Filling
Expressway subgrade finishing construction document
Our contract section is the tenth contract section of XX Expressway, located in XX Township, XX District, XX City, starting from K46+243.5 and ending at K50+735.811, with a total length of 3.3km; the total length of Lengpu interchange ramp is 3.038km, of which, the subgrade works are K46+611.5～K48+020、K49+220.826～K50+050.7、K50+133.7～K50+243.231、AK0+238.260～AK0+492.590、BK0+070.424～BK0+360、CK0+498.656～CK1+826.884、DK0+000～DK0+174.938 、EK0+442.171～EK0+498.656 There are 8 natural sections in total, of which the thickness of the finishing layer in Zone 96 is proposed to be 0.3m. The material used is a mixture of stone powder: graded crushed stone=1:4, and the material source is from XX quarry. It is estimated that 29687m3 of finishing materials will be required in the bid section, with the unit price of about 186 yuan/m3 and the total price of about 5.522 million yuan.

Topic: Finishing construction scheme Construction Scheme for Expressway Works in Rainy Season Standard for subgrade of expressway
Construction organization design for subgrade blasting of an expressway
A high-speed project is located in Pingjiang County, starting from the Tongcheng boundary at the junction of Hunan and Hubei provinces, connecting Tongcheng to Pingjiang Expressway in Hubei Province, passing Dongta, Nanjiang Bridge, Meixian, the east side of Pingjiang County, Anding Town in the south, and ending at the Huangni boundary and connecting Liuyang Liling Expressway, with a total length of 73.027km.

Topic: Blasting construction scheme for subgrade of expressway Construction organization design of expressway tunnel Construction organization of expressway tunnel
Protection of railway subgrade with arch skeleton engineering construction technology
Before the formal start of construction, the construction setting out shall be carried out first, and the line hanging construction shall be carried out to ensure the linearity and surface flatness. In the actual construction, if the foundation surface or slope surface soil layer of masonry is soft, the loose soil layer and floating soil shall be compacted.

Topic: Technical Manual for Railway Engineering Construction Code for subgrade of railway engineering Railway engineering survey technology
Construction Scheme for Subgrade Filling (First Piece Project) of Expressway
The contract section XX of XX Expressway is from JK0+000 to JK12+108, with a total length of 12.108km. In this project, the embankment behind the abutment is high, and the embankment behind the abutment and abutment has a large differential deformation, which is easy to cause bumping at the bridgehead. In order to enhance the bearing capacity of the foundation and reduce the deformation behind the abutment, the foundation within 30-50 meters behind the abutment shall be treated with cement mixing piles, and the subgrade shall be filled after the completion of the cement mixing piles.

Topic: Construction Scheme for Subgrade Filling of Expressway First Piece Construction Scheme of Expressway Pier Column First piece construction scheme of expressway capping beam
[Huizhou] Subgrade of an expressway engineering construction Technical proposal
According to the Scheme Design, the composition of the subgrade cross section is: the original two-way six lane monolithic subgrade is 33.5m wide, the central separation width is 2.0m, the left side curb width is 2 × 0.75m, the carriageway width is 2 × 11.25m, the hard shoulder width is 2 × 3.0m (including the right side curb width of 2 × 0.5m), and the earth shoulder width is 2 × 0.75m.

Topic: Highway subgrade works Technical scheme for subgrade construction of expressway Construction Scheme of Expressway Subgrade
[Hubei] Expressway subgrade engineering construction Drawing design (including drainage)
Content introduction [Project overview] Subgrade width: 24.5 (overall)/12.5 (separated) meters Lane width: 4X3.75 (overall)/2X3.75 (separated) meters Hard shoulder width: 2X2.5 (overall)/2.5 on the right side, 0.75 on the left side (separated) Road class: highway load class: highway I-load class: highway I-design speed: 80 Km/h [Design features] 1. According to the characteristics of the project area, the cross section type and design parameters of the subgrade shall be flexibly selected. According to local conditions, multiple separated subgrade types such as upper and lower separated subgrade, half road and half bridge, and two bridge separation shall be adopted to avoid excessive mountain excavation and reduce high fill and deep excavation of subgrade; 2. Fully consider mechanized construction methods, and apply new technologies, new structures, new materials and new processes to simplify construction links; 3. Prevent geological disasters from harming subgrade, bridge, tunnel and other structures, give priority to prevention and combine prevention and control, and the treatment scheme is safe and economic, easy to construct, conform to nature, and try to coordinate with the surrounding environmental landscape; 4. The dynamic design concept is applied throughout the whole project construction process, and the design scheme is adjusted and optimized in time according to the actual situation to ensure the rationality and feasibility of the design scheme and ensure the smooth implementation of the project construction. [Drawing content] Subgrade design table; Design table of side ditch (drainage ditch); Standard cross section of subgrade; General subgrade design drawings; Design drawing of subgrade cross section; Superelevation mode diagram; Quantity table of tamping (compaction) of cultivated land before filling; Bill of quantities for high fill and deep cut subgrade works; Bill of Quantities for Low Fill and Shallow Cut Subgrade Treatment; Design drawing of low fill shallow cut subgrade treatment; Design drawing of bridgehead subgrade treatment; Bill of Quantities for Treatment of Steep Slope Embankment or Cut fill Junction; Design drawing for treatment of steep embankment or cut fill junction; Bill of Quantities for Special Subgrade Design; Quantity table of subgrade earthwork; Quantity table of subgrade earthwork per kilometer; Statistics of subgrade earthwork volume; Design drawings of borrow pit (yard) and spoil dump (yard); Quantity table of subgrade protection works; Design drawings of subgrade retaining and protection works; There are 75 CAD drawings in the bill of quantities of subgrade drainage works. The main line integral subgrade (with superelevation) was prepared in 2008 Standard cross section of subgrade for Class II highway realignment Schematic diagram of separated subgrade intersection design Filling subgrade protection Schematic diagram of subgrade cross section Schematic diagram of rock fill subgrade design Superelevation square diagram High fill and deep cut subgrade Schematic diagram High fill and deep cut subgrade deformation and stability detection Design diagram Low fill and shallow cut subgrade treatment Bridgehead subgrade treatment Screenshot 06 Standard cross section of interchange ramp

Topic: Subgrade and pavement of expressway Hubei Expressway Construction of highway subgrade works
Drainage of subgrade and pavement of expressway engineering construction programme
The subgrade pavement drainage system of the whole line consists of side ditches, drainage ditches, retaining wall drainage ditches, intercepting ditches, chutes, bridges and culverts, etc. (1) The filling drainage ditch is a trapezoidal drainage ditch with a depth of 0.6m, a bottom width of 1.2m, and a wall thickness of 0.3m at the filling section where the subgrade is eroded by general surface water. The structure is M7.5 mortar rubble, and the foundation bottom is plastered with M10 mortar with a thickness of 2-3 cm. The longitudinal slope at the trench bottom is generally not less than 0.3%. (2) The excavation side ditch is generally a rectangular side ditch with a depth of 0.9m, a bottom width of 1.2m, a wall thickness of 0.3m, a cover plate of 8 cm thick C30 reinforced concrete, a 30 cm cap stone of C25 concrete for the top of the side ditch, M7.5 mortar rubble for other structures, and M10 mortar plastering for the bottom of the foundation with a thickness of 2-3 cm. (3) The drainage ditch of the slope platform is a rectangular drainage ditch of the platform with a depth of 0.7m, a bottom width of 0.7m, and a wall thickness of 0.3m. C20 cast-in-situ concrete is used for the drainage ditch of the slope platform in the excavation section where the slope inclines to the subgrade. The drainage ditch should be set up step by step and introduced into the intercepting ditch. (4) Intercepting ditch When the upper slope of the slope has a large catchment area, a hillside intercepting ditch with a depth of 0.7m, a bottom width of 1.0m, and a wall thickness of 0.3m shall be set 5m outside the slope opening. C20 cast-in-place concrete shall be used and it shall be covered by greening. The catchment in the intercepting ditch shall be led into the drainage ditch through the chute at both ends. If the excavation groove has undulating terrain, the chute shall be set at the lower part as the drain hole to drain the water to the excavation side ditch. (5) The chute chute is divided into four categories: A, B, C and D. The chute chute is generally no less than 10 meters long. If it is very long, it should be built in sections. Each section can be 5 to 10 meters long. The joints should be filled with waterproof materials. The bottom of the chute shall be built into a rough surface to reduce the flow rate. One anti-skid platform shall be set at a horizontal spacing of 1.5m. The junction between the rectangular side ditch and the chute shall be smooth to facilitate drainage.

Topic: Construction scheme of high-speed subgrade works Construction scheme of pavement drainage works Drainage construction scheme of high-speed pavement
Construction technology of a highway subgrade, covering subgrade, drainage and protection works
Subgrade, protection, drainage, earthwork, construction technology of a highway subgrade, covering subgrade, drainage and protection works

Topic: Highway Subgrade Construction Technology Highway subgrade construction technology ppt Summary of highway subgrade construction
Design and construction drawings of various types of highway subgrade protection works
The project is the design and construction drawing of various types of highway subgrade protection works, which includes various highway slope protection, including skeleton slope protection, grass spraying, grass spraying, retaining wall, etc.

Topic: Highway subgrade slope protection Highway subgrade design Construction of highway subgrade works
Special Maintenance of Hangzhou Ring Expressway Pavement engineering construction organization design
The total length of xx ring expressway is 123.5 kilometers, which is composed of east, south, west and north lines and some interchange areas. The east line of the ring expressway was started in 1999 and opened to traffic at the end of 2002. It starts from Shenshi Interchange in Haining City and ends at K23+481 (the junction of Hangzhou Jinqu public section). It is constructed according to the expressway standard of 110km/hour, including K0+000~K14+100 two-way four lane, K14+100~K23+481 two-way six lane; The south line was completed and opened to traffic in December 2003. It is a two-way four lane highway, and the whole line is built according to the expressway standard of 100 km/h. The west line was completed and opened to traffic in December 1997. It is a two-way four lane highway, and the whole line is built according to the expressway standard of 100 km/h. The north line was completed and opened to traffic in December 2002. It is a two-way four lane highway. The whole line is designed and built according to the expressway standard of 100km/h.

Topic: Construction Contract of Expressway Project Construction organization design of highway engineering Bill of Quantities of Expressway
Daily maintenance of an expressway engineering construction Design
***The routine maintenance project of the expressway to * * is located in the south of Henan Province. The route starts from the south of * * * and connects with Luozhu section, and ends at Jiuliguan at the junction of Henan and Hubei through Queshan, Minggang, Huaihe, Xinyang, Sekong, and South Henan stations. It connects with the north section of Hubei Province of the trunk line of Beijing Zhuhai National Highway, and connects with Yexin Expressway at K966. The total length of the route is 133.923km.

Topic: Construction Scheme for Daily Maintenance of Expressway Construction organization design of bridge daily maintenance Summary of expressway maintenance construction
Expressway maintenance engineering construction organization design
In addition to highway patrol and inspection, daily cleaning and maintenance, according to the disease situation of * * Expressway in 2004, the maintenance works mainly focus on the following highway bridge diseases: a Pavement: maintenance and repair of various cracks, settlements, potholes, ruts, bumps, settlements, waves and washboards, frost heave and boiling, pockmarks and looseness, oil flashing, peeling, edge gnawing, polishing, and bridge asphalt pavement; b、 Subgrade: gully, subgrade settlement, mud boiling, collapse, mortar rubble or shotcrete anchor slope protection damage, shoulder stone defect, prefabricated shoulder cracking, etc; c、 Bridge tunnel: expansion joint damage, bridge pier cracks, cone slope damage, bridge abutment back subsidence, paint corrosion, etc; d、 Greening: conservation and maintenance of plants and seedlings, and withering of seedlings; e、 Traffic facilities: some signs, reflective signs, isolation net damage, steel guardrail alignment, deformation, anti glare plate defect, marking pollution and lack;

Topic: Construction Contract of Expressway Project Construction organization design of highway engineering Bill of Quantities of Expressway
Template of settlement statement for subgrade works of expressway
This data is the template of the settlement statement for the subgrade works section of the expressway. The contents are complete and can be downloaded

Topic: Highway subgrade works Template of completion statement for weak current discipline Standard for subgrade of expressway
Bid construction team for Bid 6 of subgrade, bridge and culvert works of an expressway
This contract section is the subgrade earthwork works of the sixth contract section of an expressway. The starting stake is at K56+000, and the ending stake is at K67+000, with a total length of 11.00km.

Topic: Standard for subgrade of expressway Construction Scheme for Expressway Works in Rainy Season Expressway bidding construction scheme
Subgrade protection engineering construction organization design
Subgrade protection works are important measures to prevent subgrade diseases, ensure subgrade stability, improve environmental landscape, maintain ecology, and prevent water and soil loss. 7.5 # cement mortar rubble slope protection, arch skeleton and grass planting slope protection are respectively set for the interchange and four ramps in this contract section according to the filling height and terrain along the line. The main quantities of protection works in this contract section are: 4705.9 m3 mortar rubble, 324.4 m3 prefabricated C20 concrete, 182.4 m3 gravel cushion, and 697.8 m2 grass planting area.

Topic: Summary of subgrade protection construction Construction organization design of highway subgrade works Construction organization design of railway subgrade works
Subgrade slope and scouring protection engineering construction
All protective facilities shall be constructed on stable foundation and slope. In the section without retaining wall or underground drainage facilities, retaining wall and drainage facilities shall be well prepared before protection.

Topic: Foundation scouring construction scheme Capping beam construction protection Construction protection measures
Cad general drawing of highway subgrade protection engineering design
This drawing is the construction drawing design of highway subgrade protection works, a total of 23 sheets, including the detailed design of such works as spray seeding grass planting, 3D mesh spray seeding grass planting, lining arch, hexagonal block, spray seeding grass+3D mesh, arch protection, concrete frame grass planting, anchor rod frame grass planting, cutting wall, shoulder wall, buttress retaining wall, step, platform, debris platform, and guardrail, Rich details.

Topic: General highway atlas General drawing General design drawing
Subgrade protection of contract section 9 of Meixian Sanhe Dapu Section of Meixian Dapu Expressway engineering construction programme
The project area has a subtropical climate, which is obviously affected by the southeast monsoon, and belongs to a low latitude area with strong solar radiation, short winter and long summer, and sufficient sunshine. The annual average temperature is 21.2 ℃, and the average rainfall is 1414.4mm. The rainfall from April to September accounts for more than 80% of the annual rainfall. The annual average humidity is about 80%. July to October is the prevailing season of typhoon.

Topic: Construction Scheme of Highway Subgrade Protection Works Construction Contract for Expressway Protection Works Construction scheme of high-speed protection works
Subgrade protection scheme of a super large bridge with continuous beam crossing expressway
Subgrade protection scheme of a super large bridge with continuous beam crossing expressway

Topic: Construction Scheme for Super Large Bridge of Expressway Construction Scheme for Subgrade Protection of Expressway Expressway protection construction contract