3944m2 residential construction organization design

Uploaded on: 2021-04-12 15:52:32 come from: Construction documents / Construction organization design / Construction organization design of residential buildings

zero

3 points

The project is located at the junction of Mengwan East Road and Panjia Street, Jinyuan Town, Dayi County, Chengdu. Building 4 # has a floor area of 3944 ㎡, a bottom frame structure, and six floors; 6 #, 7 #, 9 #, 10 #, 11 # buildings have a building area of 3422 ㎡, 4903 ㎡, 3360 ㎡, 6585 ㎡, 3325 ㎡, brick concrete structure, with six floors; The construction period is 270 calendar days, and the scope of project bidding is civil engineering, decoration and installation. The foundation bearing layer is clay layer, and the characteristic value of foundation bearing capacity fak=180kpa. The foundation bearing stratum is slightly dense clay layer, and the characteristic value of foundation bearing capacity fak=180kpa. Strip foundation is C25, cast-in-place beam slab column concrete is C25, cantilever beam is C30. The foundation of the bottom frame part and the beam, slab and column are C30. The brick concrete part of the load-bearing wall masonry uses MU10P sintered porous bricks. The masonry mortar below ± 0.000 uses M10 cement mortar, the first and second layers use M10 composite mortar, the third and fourth layers use M7.5 composite mortar, and the rest of the masonry uses M5 composite mortar. Shale hollow blocks are used to build the non bearing wall.

3944m2 residential construction organization design - Figure 1

3944m2 residential construction organization design - Figure 2

3944m2 residential construction organization design - Figure 3

3944m2 residential construction organization design - Figure 4

3944m2 residential construction organization design - Figure 5

Click to download the source file now

Special statement: This material belongs to the sharing uploaded by users Downloaded content, only for learning, not for commercial use. If there is any copyright problem, please timely contact Station delete!

Collection

WeChat code scanning and sharing

Click to share

Related recommendations

Construction organization design scheme of 4737.48m2 residential frame project
The project is a six storey frame structure, manual hole digging pile foundation, with a building area of 4737.48 square meters. The planned commencement date is August 1, 2007 (the actual commencement date is subject to the commencement notice issued by Party A). The total construction period is controlled to be 240 days (calendar days). The building elevation is ± 0.000, which is the absolute elevation; The building height is 19.30M; The number of building floors is 6+1; The reasonable service life of the house is 50 years; The safety level of the building structure is Level II; Building structure form: frame; The roof waterproof grade is Grade III; The waterproof layer has a service life of 10 years, and the fire resistance rating of the building is Grade II; The seismic fortification intensity is 6 degrees.

Topic: Project construction organization design scheme Frame construction organization design Construction scheme of frame works
Construction organization design of 19471 square meters intelligent building
The foundation earthwork has been excavated in advance for this project. The scope of this bidding includes: civil engineering, water supply and drainage, heating, ventilation, air conditioning, power, lighting, generic cabling, building automation, security monitoring, weak current and elevator works. (1) The construction area of the project is 19471.49 m2, including 10492.62 m2 above ground and 8978.87 m2 underground. (2) This project is an intelligent building equipped with advanced facilities. The underground of the project is 2 floors, of which the underground 1 floor is partially equipped with mezzanine. The scope of the underground building is ① to 14/A to E, and the plane size of the building is 109.2 × 34.4 m; There are 5 floors above the ground, and 6 floors locally. The scope of the above ground buildings is ① 〜 14/A 〜 C. The north side of the north-south direction is indented 12.3 m to the south, and the south side is indented 2.6 m to the north. The building plane size is 115.2 × 16.8 m. The building height is 18.95 m. The second underground floor is a garage, the first underground floor is a restaurant and some equipment rooms, the basement mezzanine is a bicycle garage, the first floor is a machine room and archives, the second to fourth floors are office rooms, the fifth floor is a conference room and academic lecture hall, and the sixth floor is an elevator machine room and TV antenna room.

Topic: Intelligent construction organization design Construction Scheme of Intelligent Building Project Construction and organization design
Construction organization design of 5854.29m2 heavy truck garden
This project is the 2 #, 3 # buildings and underground garage project of Zhongqi Dikou Road Garden Residential Group. The construction site is located at No. 41 Dikou Road, Jinan City. The structural forms and construction practices of the two residential buildings are basically the same. 2 # residential building is 34.880m long, 12.780m wide, 31.25m high, with a total building area of 5854.29m2. There are 11 floors above the ground and 1 floor underground. The first floor underground is a storage room. The first floor above the ground is residential. The basement floor is 3m high, and the other floors are 2.8m high.

Topic: Garden construction organization design construction organization Model of construction organization design
Construction Organization Design of 17764.92m2 Jiayuan Community
The total building area of the project is about 17764.92m2, of which the basement is 5888.03m2. The basement is mainly divided into parking spaces, power distribution rooms, fire pools and equipment rooms. The above ground part is a residential building with eleven floors, 2.8m high, and the top floor is equipped with an attic, with a total height of 38.30m. There are water, electricity, heating, ventilation, fire protection, sprinkler forest, elevator, driveway, etc. in the project.

Topic: Community construction organization design Weak current construction organization scheme of the community Construction organization design of one residential building in a community
2892.60 square meters double city construction organization design
The construction area of the project is 2892.60 m2, the building height is 17.85 m, and there are four floors above the ground. The top floor is an attic floor, the first floor is a garage, and all of them are residential buildings. The external wall above ± 0.00 is 490mm thick red brick, and the external wall is 80mm thick PG benzene plate for thermal insulation. Doors and windows: the window is a double frame double glass plastic steel window, and the space between the plastic steel window and the wall is filled with polyurethane foaming agent. The household door is Class B fireproof, anti-theft and thermal insulation door, and the internal door is only reserved for the entrance, not to be sheathed or installed. The pipeline well door is Class C fireproof door. Organized internal drainage is adopted for roof drainage, and PVC pipe is adopted for downpipe with diameter of 120mm. Decoration works: the color of the exterior wall facing brick is adjusted according to the style of the community, the interior wall is plastered with mixed mortar and scraped white, the kitchen and bathroom wall tiles are tiled to the top, and the ground is pasted with mid-range anti-skid tiles. Other floors are plastered and polished with cement mortar. The stair tread is marble surface, and the stair handrail is stainless steel pipe.

Topic: Shuangcheng fire well engineering design Construction organization design Construction and organization design
Construction organization design of 17000m2 office building
The roof and roof board of the meeting room on the fifth floor of the building shall be removed and the wall shall be aerated concrete block wall; The floor adopts cement mortar floor, granite floor and wood floor; The exterior wall is decorated with advanced face bricks and granite hanging surface; Mixed mortar, cement mortar and porcelain like paint are used for the inner wall; The ceiling adopts paper reinforced plaster, plastic ceiling and aluminum alloy keel ceiling; The roof adopts coiled material waterproofing and rigid roof double waterproofing.

Topic: Construction organization of office building Bank office building lighting construction organization design Construction organization design for electromechanical installation of office building
1537.71 square meter office building construction organization design
An office building and ancillary facilities project is built by a traffic management station of a district traffic bureau relying on financial appropriation, and designed by a design institute limited company. The building area is 1537.71m2, the building is four and a half stories high, the first story is 3m high, the second story is 4m high, the third to fourth story is 3.6m high, and the total height of the building is 15.6m. The structural form of the project is frame structure, and the seismic fortification is seven degrees and three levels. The maximum span of the project is 9.6M. The foundation adopts prefabricated pipe pile foundation, with a pile diameter of Φ 400, an estimated pile length of 17 m, a single pile bearing capacity of 1000 KN, and a ultimate bearing capacity of 1700 KN. The thickness of cushion cap is 0.9M for single pile cap, 1.10m for two pile caps, and 1.00m for three pile caps; The four pile abutment is 1.00 m, and the five pile abutment is 0.80 m, using C30 concrete. The cross section of the frame column is square, the maximum cross section is B × H=600 * 600, the concrete strength grade is C25, and the beam slab concrete strength is C25. The wall body masonry is mainly clay brick masonry, and the wall is 180 and 120 thick.

Topic: Construction organization of office building Bank office building lighting construction organization design Construction organization design for electromechanical installation of office building
404.07m2 dormitory construction organization design
This project is a dormitory building with a total floor area of 404.07M2. The total height of the building is 7.65m. The roof waterproof grade is Grade III, the fire resistance grade is Grade II, and the service life is 50 years. The exterior wall of the project is decorated with cement mortar and painted with exterior wall paint. The slope surface of the gutter is decorated with red tiles. The wall and ceiling of the room corridor, staircase are roughened with mixed mortar, covered with lime paste, and painted with white emulsion paint. The wall of the toilet is 200 × 300 glazed tiles, and the height is to the bottom of the ceiling. The ceiling is aluminum alloy T-shaped keel ceiling, and the mineral wool decorative board surface layer. The floor is 500 × 500 quartz floor tile except the toilet. The toilet is 400 × 400 anti-skid quartz floor tile. Roof construction method: reinforced concrete roof panel, with the surface cleaned; 20 thick (thinnest part) 1:8 cement expanded sanitary perlite for 20% slope; 20 thick 1:2.5 cement mortar leveling layer; Brush the base treatment agent once; 3-thick APP modified asphalt waterproof coiled material; 30 thick bridge plastic polyphenylene insulation board; XY409 floor glue spot bonding; 25 thick 1:4 dry hard cement mortar surface is sprayed with plain cement; 8-10 thick floor tiles shall be paved flat and compacted, and the joint width shall be 5-8, and 1:1 cement mortar shall be used to fill the joint.

Topic: Dormitory building construction organization Construction organization design and decoration of a dormitory building Construction Organization Design Report of School Dormitory Building
Construction Organization Design of 49000m2 R&D Building
The total land area of the whole project is 11713m2, and the total building area is 49000m2, of which the aboveground building area is about 36000m2, the underground building area is about 13000m2, and the aboveground building area is 3580m2. The construction scheme of the project was prepared by S O. Designed by Company M, the Design and Research Institute of the Ministry of Machinery Industry is responsible for the design of construction drawings. The main building of the building is in a "V" shape, with a north-south length of about 102.7m and a east-west width of 62.5m. The building is well proportioned, simple, bright, spectacular and luxurious, with complete functions. The cornice height of the building is 49.7m. The exterior wall decoration is composed of granite, glass curtain wall, aluminum plate and stone grating, supplemented by the sunshade structure system, and the building treatment method of the upper structure shrinking layer by layer, so that the whole building has both the Chinese traditional grand and solid architectural style and the simple and bright modern architectural style.

Topic: Construction organization design of drug research and development center Street lamp design and development Construction organization design
Construction organization design of 46939 square meters plaza building
Covering an area of 4200 m2, it has three floors underground and thirty-one floors above the ground (partial thirty-three floors); The total building area is 46939m2, including 10547m2 underground, 36392m2 above the ground, 1982 m2 for the first floor, and about 1000m2 for the standard floor; The podium is below the fifth floor, where the first to third floors are shopping malls, and the fourth to fifth floors are hotels; The tower above the sixth floor is for commercial and residential use. The podium on the first to fifth floors of the project is of frame tube structure, the transfer floor and technical floor are set between the fifth and sixth floors, and the tower on the sixth to thirty third floors is of shear wall structure. The building is a comprehensive commercial building integrating commerce, catering, entertainment, office and commercial residence, with a total height of 105m, axis length of 53.1m and width of 39.0m.

Topic: Construction organization design of square stage Construction and organization design Construction organization design
Civil construction organization design of 63200 square meters airport
The new terminal building is a composite reinforced concrete frame structure, with steel tube composite columns used locally around and indoors, curved thin-walled steel tube roof truss and metal plate light roof system used for the roof. The plane is divided into four parts: A, B, C and D, and deformation joints are set between adjacent areas; In order to reduce the number of joints, the method of reserving construction post cast strip for larger sections instead of setting permanent expansion joints or using shrinkage compensating concrete (adding 10% of composite expansion agent CEA-B) for the super long design and construction of reinforced concrete structures will affect the tensioning time of prestressed reinforcement if there is a post cast strip. Structure size: the column grid size is 9m × 9.6m, and the column grid of the central hall is 9m × 24m, 9m × 16.8m, 18m × 24m, 18m × 16.8m. The dimensions of columns and beams are various. The basement is 234m long and 25.8m wide. The reinforced concrete outer wall is 500m thick, the foundation slab is 1000mm thick, and some parts are 1600mm thick.

Topic: Construction organization design of civil engineering Construction organization design of airport fine decoration Construction organization of civil steel structure
Construction organization design of 230000m2 group houses
The main structure of the project is reinforced concrete shear wall structure** The community project is invested and constructed by Tianjin * * Real Estate Investment Co., Ltd., with a construction area of 122488 ㎡. The structural form of the project is frame structure, and the seismic fortification intensity is 7 degrees. The fire protection rating is Class II above ground and Class I underground. The underground and roof waterproof rating of the project is Class II. The foundation is cast-in-place bored pile, and foundation cushion cap and raft are set on the pile. Site elevation Dagu elevation is 3.2m.

Topic: Construction organization design 10000 gas holder construction measures 6+1 residential construction organization design
62511 square meters construction organization design of a hospital in Shanghai
**The reconstruction and expansion project of the outpatient medical technology building of the hospital is located in the scope of * * hospital land at No. 197, * * Second Road, adjacent to * * Second Road in the west, the original outpatient building in the north, and the research and experiment building of the training and nursing center in the east, which is located in the downtown area. The area of the base is about 20977 ㎡, and the only way to enter and exit the hospital area is through the gate of * * 2nd Road.

Topic: Tunnel construction organization design Shanghai construction organization design approval Construction organization design of hospital
Design and construction drawing of 120m2 residential decoration
This drawing is a design and construction drawing for the decoration of 120 square meters of residential buildings. It includes: elevation view, plane wall building planning dimension drawing, ceiling material planning drawing and other drawings. The contents are detailed and can be used for reference.

Topic: Residential decoration design and construction drawings Residential decoration cad construction drawing Decoration construction drawing of residential public area
Construction Organization Design of External Scaffold (Phyllostachys pubescens) for 87597.61 m2 Residential Building Project
It is located in the south of Jiayuan Road and the east of Huarong Road, adjacent to the workshops of Yongchang Knitting Co., Ltd. and Xianhong Food Co., Ltd. in the south, and adjacent to the commercial and residential building of Yijing Garden in the north; The community is composed of 16 six storey and half frame commercial and residential buildings and substations, with a total construction area of 87597.61m2. The community is also equipped with outdoor recreational green area, children's playground, badminton court, shopping malls, neighborhood committees, property management and other service facilities, with a green area of 23000m2 and a greening rate of more than 40%; The roads in the community are smooth, and there are basements and elevated parking lots on the first floor.

Topic: Bamboo scaffold technology Specification for bamboo scaffold Construction scheme of bamboo scaffold
Construction organization design of a 5982 square meter Beijing high-rise residential renovation project
This project is a high-rise residential building. The planned construction land is 7.48 hectares, with a total construction area of 5982.68 square meters and 143 residential households, including 5669.62 square meters of aboveground construction area, 313.06 square meters of underground construction area, and 5.5-11.5 floors of residential buildings. The floor height of the residence is 2.8m. The highest cornice height is 30.95m. The bottom elevation of the base is -4.15m. The elevation form is pitched roof, and the top is equipped with a spring floor. Each unit is equipped with an elevator and a staircase for vertical traffic. The east-west direction is the fire elevator.

Topic: Construction scheme of renovation project Construction Scheme of Beijing High rise Project Construction organization design of a high-rise residential project
Construction Organization Design and Bill of Quantities of 2000 m2 Seven storey Frame Residence
This data is the construction organization design and bill of quantities of 2000 square meters seven storey frame residential building. The data is valuable and detailed for reference.

Topic: Basis of Bill of Quantities Construction Bill of Quantities Construction Organization Design of Seven storey Frame Residential Building
Construction organization design of a residential project in Huangshan
Project name: 14 #, 15 #, 16 #, 17 #, 18 #, 19 # and 20 # buildings of "* * * *" in * * * * * Town, * * * * City Construction unit: Wuhu * * * Real Estate Development Co., Ltd. Construction site: * * * * Town, * * * City Project scope: civil engineering, water, electricity and sanitation Construction structure type: frame structure Design service life: 50 years Contracting method: contract work and materials Construction period requirements: 300 days. The commencement date is August 8, 2007, and the completion date is June 3, 2008. Project quality standards: meet the national acceptance standards, and pass the one-time acceptance.

Topic: Construction organization design of residential project Compilation basis of residential construction organization design Selection Basis of Residential Construction Organization Design
Construction organization design of a multi-storey residential building in Hangzhou
1） Wall works 1. The exterior wall of the basement of this project is reinforced concrete wall, and the interior firewall is 240 solid clay bricks. 3. All building structures, relevant reserved holes, embedded parts, water, electricity, weak current and other embedded pipes shall be constructed in close cooperation with the relevant units during construction. It is not allowed to chisel after the construction. If any change is required, it shall be approved by the design institute before construction. 4. See the structural construction for the blocking of the reserved holes in the concrete wall. The remaining reserved holes in the masonry wall shall be filled with C20 fine aggregate concrete after the pipeline installation is completed. 5. The surface of the wall at the junction of two different materials shall be nailed with 300 wide steel mesh (nailed and pasted during the first painting) and painted with 1:2 cement mortar. 2） Floor 1. Cement floor (from bottom to top): one layer of pure cement slurry; 12 thick 1:2.4 cement mortar base; 13 thick 1:1.5 cement mortar surface layer is calendered; It is used for stair flight, platform, etc. 2. Fine aggregate concrete (from bottom to top): plain soil compaction; Slab bottom cushion and cushion cap reinforced concrete structure layer; One layer of pure cement slurry; 30 thick C25 fine aggregate concrete shall be tamped and trowelled at the same time; Sprinkle dry mixed 1:2 cement sand, and press polish the surface for underground garage and equipment room. 3） Internal and external wall painting, ceiling 1. The bottom of all ceiling cast-in-place plates shall be trimmed and leveled, and white cement mixed with old powder shall be used for two passes. 2. Interior wall coating (from inside to outside): 20 thick 1:1:6 cement lime mortar, trowelled in layers; 2 thick glass fiber gray light surface, base course cleaning, white exterior wall coating on the surface. 3. The concrete base surface shall be painted with 1:2 cement mortar and white exterior wall paint. Interface treatment is required before painting. 4） Roof works 1. The roof drainage of the garage is organized drainage. The drainage ditch around the garage is connected to the outdoor pipe network of the community. See the general layout of water construction for the interface location. 2. The road on the garage roof and the landscape drainage are connected to the drainage ditch outside the garage. 3. The daylighting well on the top of the garage is only a schematic, and the specific positioning and practice will be determined by the landscape design. 5） Door and window painting works 1. Position of door and window frames: all door frames are flush with the wall in the opening direction. 2. All wooden doors and windows shall be painted with one primer and two coats of alkyd ready mixed paint, and the inside and outside shall be light gray; All doors and windows are customized. 3. All exposed iron parts shall be subject to antirust treatment. The specific method is to brush yellow bile antirust paint twice and black finish paint externally.

Topic: Multilayer construction organization design Construction Organization Design of Hangzhou High rise Residential Building Construction organization of multi-layer steel structure
Construction organization design of a multi-storey residential building in Tangshan
Project name: construction site: project scale: this project is a residential building with three units in total (two units are nine floors above the ground, one unit is five floors above the ground, and the underground is one floor); It covers an area of 896.34 square meters, including 896.34 square meters of the underground floor, 917.34 square meters of the standard floor, 112.2 square meters of the machine room, water tank room, etc., with a total construction area of 8028.68 square meters; Elevation: the indoor and outdoor elevation difference of the building is 0.90m, the height of the first underground floor is 2.7m, the height of other floors is 2.9m, and the total height is 27.60m; Structural form: Bid inviter: *******; Designer: Bidding Agency:

Topic: Multilayer construction organization design Construction organization of multi-layer steel structure Construction organization of multi-storey residential buildings
Construction organization design of a residential project in Wuhan
The project is a six storey frame structure, manual hole digging pile foundation, with a building area of 4737.48 square meters. The planned commencement date is August 1, 2007 (the actual commencement date is subject to the commencement notice issued by Party A). The total construction period is controlled to be 240 days (calendar days). The building elevation is ± 0.000, which is the absolute elevation; The building height is 19.30M; The number of building floors is 6+1; The reasonable service life of the house is 50 years; The safety level of the building structure is Level II; Building structure form: frame; The roof waterproof grade is Grade III; The waterproof layer has a service life of 10 years, and the fire resistance rating of the building is Grade II; The seismic fortification intensity is 6 degrees. All the frame infilled walls of the project are built with 150 and 250 thick MU5 fly ash blocks with Mb5 mixed mortar. The wall body masonry shall be constructed according to the relevant block construction specifications. The junction between the wall and the reinforced concrete column shall be tied with steel bars.

Topic: Construction organization design of residential project Construction organization measures Project construction organization management
Construction organization design of a residential building in Anhui
**Building 5 # is located in the west of Jiefang South Road, Yu'an District, Lu'an City, adjacent to the railway station in the south, the municipal government building in the east, surrounded by Pi River in the west and north, close to the old urban area, with a superior environmental location. Building 5 # is a six storey reinforced concrete special-shaped column frame structure system above the ground. It has a sloping roof. The floor height is 2.9m, the total height is 20.58m, the east-west length is 39.28m, and the north-south width is 20.45m. There are two units in total, with a building area of about 2854m2. The project is planned to be completed before June 18, 2005. The building is a reinforced concrete special-shaped column frame structure system, and the design depth of foundation embedment is -3.6m. The foundation is an independent foundation under the column. The floor height of the main structure is 2.90 meters. The frame column, beam, slab and ladder below 2.90 meters are C30 concrete, and the rest are C25 concrete. The floor is a cast-in-place reinforced concrete integral floor, the wall below+0.00 is MU10 clay solid brick, the masonry mortar is M7.5 cement mortar, the wall above+0.00 is hollow brick, and the masonry mortar is M5 mixed mortar.

Topic: Anhui residential building construction organization design Construction organization of multi-storey residential buildings Summary of residential building construction organization
Construction organization design of a residential building in Shaanxi
The total building area of the project is 30747 square meters, and the main structure form is: shear wall structure, seismic fortification intensity eight, seismic grade two, one underground floor, thirteen floors above the ground, the floor height is 3.6M, the indoor and outdoor height difference is 0.3m, and the building height is 39.35m.

Topic: 6 Construction organization design of residential building Construction organization of multi-storey residential buildings Summary of residential building construction organization
Construction organization design of a residential group in Chengdu
1. Project content overview 1) Site condition: The project is located in the southern new area of XXX District, Chengdu City, with Linyin Avenue in the north, XX Road in the east, and XX Road in the west. The traffic is convenient. The site has been leveled at present, and 630KVA power distribution substation is provided by the Employer on the site. 2) Scope of work of this bidding: the construction content of this project includes foundation, main body, waterproof, installation reservation and embedment, partial decoration, outdoor road (20m road between 1A and 1B), drainage pipe ditch, sewage pipe ditch, garden (hard landscape part) and other works included in the design drawings. 3) The professional subcontracting scope designated by the Employer: installation works such as strong and weak current, fire protection, water supply and drainage, air conditioning, waterscape systems, and aluminum alloy, glassware installation, outdoor stone installation, landscaping (soft landscaping) and other works designated by the Employer for professional subcontracting are not within the scope of this bidding, but shall bear the general contracting responsibility. 4) The works carried out by other independent construction units include geological exploration, elevator installation, gas installation, mechanical and electrical supply and installation of 10KV power supply and distribution system, and road works outside 1B. These works are responsible for cooperation.

Topic: Construction organization design of frame residential complex 6+1 residential construction organization design Basis for residential construction organization design
Construction organization design of a residential project in Dandong
The general design of the construction organization prepares the guiding documents for the engineering department of * * Real Estate Development Co., Ltd. to guide the external project bidding, project progress and quality management. As an important part of the project bidding, the preparation basis is mainly the design and construction drawings provided by the Architectural Research Institute of Tsinghua University, the relevant national and local codes, regulations Provisions and notices.

Topic: Construction organization design of residential project Dandong Cost Dandong Flood Control
Construction organization design of a residential building project
This project is a rural housing relocation project developed and constructed by the Kangnan Civil Building Unified Construction Office. The project name is: 33 # and 36 # projects. The project was designed by the Municipal Architectural Design and Research Institute. The total area of the two buildings is about 8215 m2, and there are seven units in total. Among them, 33 # residence has four units, and 36 # residence has three units. The number of floors is seven, and the floor height is 2.8 meters. The height of 33 # residence is 21.6m, and that of 36 # residence is 21.8m. The main body is brick concrete structure, and the foundation is driven precast pile foundation. See the following table for project overview:

Topic: Construction organization design of residential building project Construction organization of multi-storey residential buildings Summary of residential building construction organization
Construction organization design of group housing project
S/N Item Content 1 Project Name 2 Project Owner 3 Designer 4 Supervisor 5 Building 2, 3, 6, 7 with a floor area of about 24267.76 m2 6 Project Location 7 Structure form Full cast-in-place shear wall structure 8 Foundation form strip foundation 9 Number of floors above ground 6 10 Building purpose residence

Topic: Construction organization design of group residence Construction organization design of large residential projects Construction Organization Design of Vanke Residential Project
[Qingdao] Construction organization design of a residential project
The main construction machinery configuration during the structural construction of the project: 2 tower cranes, 2 concrete delivery pumps, 2 construction elevators, 386 people in the peak labor season. 5 "Safety assessment" of construction site

Topic: Construction organization design of residential project Compilation basis of residential construction organization design Selection Basis of Residential Construction Organization Design
Construction organization design of a residential reconstruction project
Construction scope: construction, installation and decoration works within the construction drawings of a residential reconstruction project.

Topic: Construction Organization Design of Old Community Reconstruction Project Reconstruction construction organization design Project construction organization design
Water and electricity construction organization design of a residential building
For the water and electricity construction of a residential building, the main function of the basement is the parking garage, part of the wartime civil air defense area, and the main function of the first floor is commerce and some supporting public facilities.

Topic: Water and electricity construction organization design of residential buildings Construction organization of multi-storey residential buildings Summary of residential building construction organization
Floor heating construction organization design of a residential building
The construction group includes the construction organization scheme of the low-temperature radiation heating project, mainly including the construction preparation basis, construction procedures and quality safety measures.

Topic: 6 Construction organization design of residential building Construction organization of multi-storey residential buildings Summary of residential building construction organization
Electrical construction organization design of residential engineering
The project includes low-voltage distribution system, lighting system, lightning protection and grounding system, cable television system, building intercom system, and meter remote transmission system. Electrical fire protection system.

Topic: Electrical construction organization design of residential buildings 6+1 residential construction organization design Basis for residential construction organization design
Construction organization design of a residential building in Xinjiang
This document is the construction organization design of a residential building in Xinjiang, including project overview, project objectives, organization and responsibilities, construction preparation, construction deployment, construction scheme and construction methods of major divisional and subdivisional works, construction methods of special parts, quality assurance system and assurance measures, resource procurement, supply plan, safe and civilized construction management measures Construction schedule and construction site plan

Topic: Construction organization design of a residence in Xinjiang Xinjiang Construction Contract Xinjiang flood control
Construction organization design of a residential project in Xuzhou
The construction organization design of a residential project in Xuzhou includes the compilation basis and description of the project overview, the overall idea of the construction organization, the targeted scheme and the division of construction sections, which can be downloaded for reference

Topic: Construction organization design of residential project Xuzhou Cost Xuzhou Flood Control
Construction organization design of a multi-storey residential building in Chengdu
The total construction area of the project is 38642.25 ㎡, including 5618.1 ㎡ for commercial buildings. There are eleven floors above the ground of buildings 1 and 2, of which the first and second floors are commercial, the third and above floors are residential, and the eleventh floor above the ground of building 10 is residential. 1. The ground floor of Building 10. The floor height of the residence is 3m, and the total height is 35.55m and 33.6m.

Topic: Multilayer construction organization design Construction organization of multi-layer steel structure Construction organization of multi-storey residential buildings
Construction organization design of a group of residential buildings in Anhui
The project content of the first bid section of the first phase of Golden Coast Mingdi: bored pile, reinforced concrete full hall foundation, frame shear structure, one underground floor, five overground buildings, of which the first and second buildings are 18 floors, the third buildings are 26 floors, and the fourth and fifth buildings are 28 floors. The building area of the first underground floor is about 21142.69m2, and the building area of the ground is 90470.66m2.

Topic: Construction organization design of group residence [Anhui] High rise residential quarters construction organization design Formwork for construction scheme of group residence
Construction organization design of residential building project
Buildings 1-85 # and 1-86 # in Area C2 of Plot XX100XX1 # in XX City are located in the south of Mountain University City, Yuelu District, XX City (adjacent to Monkey Stone Bridge and the Second Ring Road). The total construction area of the project is about 23389.2 m2, including 11694.6 m2 for building 1-85 # and 11694.6 m2 for building 1-86 #. There is no underground garage and one half basement floor. The project was developed and constructed by XX100 (Hunan) Real Estate Development Co., Ltd. and designed by XX Planning and Design Institute Co., Ltd.

Topic: Construction organization design of residential project Construction organization design of external wall of residential building Construction organization design of a residential building
Construction organization design of frame shear wall structure residence
The project consists of buildings 1 #, 2 #, 3 #, 8 #, and Phase IV basement garage, with a total construction area of 96099.26m2 (including 41520m2 basement). Building 1 #: 21 floors of overground residential buildings, and the first floor of underground bicycle garage, with a building height of 62.4m. The main structure type: frame shear wall structure; 2 # and 3 # buildings: 25 floors of overground residence and one floor of underground bicycle garage. The building height is 74.2m. The main structure type is frame shear wall structure; Building 8 #: 12 and 15 floors of overground residence, building height 35.85m and 44.7m, main structure type: frame shear wall structure.

Topic: Construction organization design of frame shear wall structure residential building 6+1 residential construction organization design Basis for residential construction organization design
Construction Organization Design of Residential Resettlement Community
The Resettlement Community B Project of XX Middle Road, XX District, Nanchang City is located in XX District, Nanchang City, on the east side of XXX, adjacent to XX Road in the east, adjacent to XX Avenue, the main road of XX District in the west, adjacent to XX Road in the north. In the middle of the land is a community under development (XXX City). The land on the west side is planned as the administrative center, XX Square and commercial financial land, and the east side is a natural mountain. The net land area is about 61515.99m2, and the total building area is 147018.00m2 (including 22544.24m2 underground building area, 124473.76m2 aboveground building area, 12290.8m2 market area, 11262.78m2 commercial area along the street, and 100209.62m2 residential area). There are 23 buildings in this resettlement community, including 1 4-storey building, 12 6-storey buildings and 10 11 storey buildings.

Topic: Construction Contract of Resettlement Community Community construction organization design Construction organization design of community gate
[Qingdao] Construction organization design of a residential project
4.1 The scope of construction is * * ********** Construction, installation and decoration works within the scope of construction drawings of reconstruction works. 4.2 Overview of construction technology scheme and method 4.2.1 Foundation engineering This project is a column foundation raft foundation. Before foundation construction, positioning and setting out, trench inspection and foundation treatment shall be carried out, and formal construction can be carried out only after the requirements are met. 4.2.2 Formwork The project mainly uses bamboo glue large formwork. 4.2.3 Reinforcement engineering The main load-bearing reinforcement of the structure of the project is designed to be ordinary hot-rolled grade I, II and new grade III. According to the actual construction needs, relevant construction specifications and working surface conditions, the steel bar joints shall be connected by rolling straight thread, flash butt welding, binding lap, electroslag pressure welding, on-site arc welding and other joint methods. The reinforcement protective layer is controlled by concrete cushion block and reinforcement positioning card. 4.3 Allocation of construction resources During the structural construction of the project, the main construction machinery configuration: 2 tower cranes, 2 concrete delivery pumps, 2 construction elevators, 386 people in peak labor hours.

Topic: Construction organization design of residential project Compilation basis of residential construction organization design Selection Basis of Residential Construction Organization Design