Design scheme of railway construction organization in a city

Uploaded on: 2020-09-09 15:05:37 come from: Road and bridge municipal administration / Road and bridge construction design / Construction organization design

zero

3 points

The formwork used in this project is self-made steel formwork, and wood formwork is used for individual details and small components. The pier body and pier cap shall adopt the overall set shaped steel formwork according to the straightness, curve and slope ratio. Abutment formwork adopts large combined steel formwork, and the lower support of ear wall, top cap and tray adopts bowl buckle support.

Design scheme for railway construction organization in a city - Figure 1

Design scheme for railway construction organization in a city - Figure 2

Design scheme for railway construction organization in a city - Figure 3

Design scheme for railway construction organization in a city - Figure 4

Construction organization design scheme of railway in a city - Figure 4

Design scheme for railway construction organization in a city - Figure 5

Click to download the source file now

Special statement: This material belongs to the sharing uploaded by users Downloaded content, only for learning, not for commercial use. If there is any copyright problem, please timely contact Station delete!

Collection

WeChat code scanning and sharing

Click to share

Related recommendations

Road construction organization of a city design scheme
All personnel and equipment required for the project are mobilized from a county where the contract section of a highway (this contract is contracted by our company) is located in our company. Mechanical equipment is transported to the construction site by large flatbed trucks, and small machines, tools and equipment are transported to the construction site by trucks.

Topic: Highway construction organization design scheme Ceiling organization design scheme Municipal bridge construction organization design scheme
Fire protection construction organization in a city design scheme
The project includes the installation of indoor and outdoor fire hydrant systems, sprinkler systems, gas fire extinguishing systems, alarm control systems, ventilation and smoke control systems, and fire control center equipment.

Topic: Construction organization design scheme Fire protection construction design scheme Construction fire protection design scheme
Foundation pit construction organization in a city design scheme
The materials for this project are mainly supplied by Party A. The plan for the amount of materials supplied by Party A shall be reported to Party A by the technical director 7 days in advance according to the site construction conditions, and the self purchased materials shall be purchased by the materialman 3 days in advance according to the site construction conditions.

Topic: Construction organization design scheme Ceiling organization design scheme Construction organization design of foundation pit construction
Construction organization of hanging basket in a city design scheme
Jinfei Tianhong Company is responsible for the assembly, operation and maintenance of the hanging basket of this project. Close mesh safety net shall be used to block the outside and both sides of the electric basket before the construction personnel use it. The basket operator must wear a safety rope independent of the suspension platform. The rope diameter shall not be less than 18mm. According to the 9.2.5 standard of GB19155-2003, the maximum length of the hanging basket shall not exceed 6m.

Topic: Construction organization design scheme Ceiling organization design scheme Construction organization design scheme of primary school teaching building
Construction organization of high-rise buildings in a city design scheme
In this project, commercial concrete is used for concrete below ± 0.00, and mixing station prepared on site is used for concrete above ± 0.00. Five sets of pump pipes (one for each building) are equipped on the site, and the concrete is pumped to the pouring position by a trailer concrete pump for pouring.

Topic: High rise construction organization design scheme Ceiling organization design scheme High rise fire protection design scheme
Drainage construction organization of a city design scheme
The foundation of the project is a concrete strip foundation. Due to the fact that the axis is dense and the size of the room is small, the mechanical excavation method is adopted. The excavator directly excavates and unloads the soil, the surplus soil is cleared manually, the handcart is used to collect the soil, and the excavator is used to load and transport the soil. In order to save economic expenditure, and considering the site conditions, the natural sloping method is adopted for the excavation.

Topic: Construction organization design scheme Ceiling organization design scheme Construction scheme of a municipal road and drainage
Construction organization of bridge in a city design scheme
This data is: the construction organization design scheme of a bridge in a city is detailed and can be used for reference.

Topic: Construction organization design scheme Ceiling organization design scheme Bridge construction scheme
Engineering organization of double track railway tunnels in a city design scheme
Dig a well in the ditch to collect water and settle it as the water supply source for the tunnel, and set a pump house nearby. Pump it to the high-level pool through the water supply pipeline, and then pump it to the tunnel and living quarters through the sewer pipeline and pressure pump.

Topic: Construction scheme for inverted arch of double track tunnel Construction organization design scheme Organization construction design scheme
Overall engineering organization of a railway design scheme
The pipeline section is located in Wenzhou City, Zhejiang Province, passing through Yongjia County and entering the urban area of Wenzhou. The landform is relatively complex. It passes through low mountains and hills, intermountain valleys, and coastal plains, and is distributed alternately. The overall terrain trend is high in the northwest and low in the southeast.

Topic: Overall construction organization design scheme Ceiling organization design scheme Overall construction organization and planning
Road construction organization of a city design scheme model
The loose paving thickness of each layer of filled subgrade is generally 25~30cm, ensuring that the thickness after compaction does not exceed 20cm. Each layer of filling shall be overfilled by 30~50cm on each side along the transverse direction of the subgrade to facilitate mechanical compaction and ensure sufficient compactness at the edge of the embankment after completion.

Topic: Model of construction organization design scheme Model of road and bridge construction organization design Road construction organization design
Construction organization of secondary highway in a city design scheme
Scope of work: the total length is 8.3km, and the design technical standard is the Class IV highway with mountains and heavy hills, the subgrade width is 5.5m, the pavement width is 4.5m, and the cement concrete pavement.

Topic: Construction organization design of secondary highway Highway construction organization scheme Construction Scheme of Class II Highway
Construction organization of a bridge in a city design scheme file
The project is located in the urban area of Jiangyin, connected with Huancheng North Road in the east and Wuxing Road in the planning in the west. The main bridge continuously spans the old Xicheng Canal, Xicheng Canal and Tongjiang Road close to the canal in the west. It is an urban bridge connecting Wuxing Road, a major east-west traffic artery in Jiangyin City. The design scope is K0+082 to Junshan Road intersection (including Junshan Road intersection). The total length of the main line is about 744m. The content is detailed and can be used for reference.

Topic: Road and bridge construction organization document Bridge construction organization design Model of bridge construction organization scheme
Construction organization of comprehensive building in a city design scheme
The project is a hospital building with a plane of "L" shape and a European style facade. The building base area is 1503m2, the total building area is 10892m2, the building height is 30.00m, and there are eight floors in total. The building is equipped with two elevators, one of which is for fire protection, and the eighth floor is equipped with an elevator machine room.

Topic: Construction organization design of complex building Comprehensive building construction scheme Fire protection design of complex building
Construction organization of Qingshan Tunnel in a city design scheme
This section is located in Baihua Town, Huidong County, Guangdong Province, with a total length of 1.76km, including Qingshan Tunnel, about 1.3km subgrade and slab culvert.

Topic: Construction organization design scheme Ceiling organization design scheme Tunnel organization construction scheme
Elevated construction organization of a section in a city design scheme
The bridge capping beam adopts non prestressed reinforced concrete capping beam, with width of 1.0m, height from 0.6m to 0.922m, and length from bridge width of 5.608m, 11.816m and 16.723m. The superstructure is a continuous deck structure of three span simply supported beams. The three span C30 reinforced concrete hollow slab beams are 8m ＋ 10m ＋ 8m long respectively.

Topic: Construction scheme of a municipal viaduct Construction organization design scheme Construction organization and design scheme
Tunnel excavation construction organization in a city design scheme
A Tianpingqiu tunnel is set in this section, which is located in Group 1, Daba Village, Zhuantang Town, with a total length of 185m. The entrance stake number is K93+165, and the exit stake number is K93+350. The traffic is inconvenient, and it is about 2km away from the nearest rural road.

Topic: Construction organization design scheme Tunnel organization construction scheme Tunnel coating construction organization scheme
Construction organization of open cut tunnel in a city design scheme
The starting and ending mileage of the open excavation section of the section tunnel in this bid section: the right line CK13+250.0~CK13+435.0 is 185m long, the left line CK13+250.0~CK13+437.5 is 187.5m long, and the entrance and exit line of the depot is constructed by open excavation method, and the section form is rectangular reinforced concrete frame structure.

Topic: Construction organization design scheme Tunnel organization construction scheme Tunnel coating construction organization scheme
Construction organization of a secondary highway in a city design scheme
A Class II highway project starts near the carbon plant in the north of Si'en Town, Huanjiang County, and is the intersection of the planned ring road of Huanjiang County and the provincial highway 2025 at K2 3+715. After arriving at Luoyang along Si'en Luoyang Highway, it passes through Gubin and Duchuan, and ends at the border of Guizhou and Guangxi provinces with Dashapo Highway. The route starts from K0+000 to K56+376, with a total length of 54.06685km.

Topic: Construction organization design of secondary highway Highway construction organization scheme Construction Scheme of Class II Highway
Construction organization of river regulation in a city design scheme
Changsha Jinjiang River Cabbage Lake Section Comprehensive Treatment Project is divided into three bid sections, mainly including new flood control levee of 743.81m, separated levee of 250m, renovation and reinforcement of yang lake embankment of 456m, levee slope protection, etc. Lot 2 of Changsha Jinjiang River Cabbage Lake Section Comprehensive Treatment Project, stake No.: Jinjiang River Z2+037.52-Z2+391.498 embankment.

Topic: Construction organization design scheme A city needs to lay for sewage treatment Ceiling organization design scheme
Construction organization of a municipal bridge design scheme
The bridge is erected by JQL30/80 double guide beam erecting machine. In order to reduce the storage of beams and save the construction site, the construction method of prefabrication and erection is adopted. Erection procedure: the gantry crane is used to move the beam onto the beam transport track trolley, which is sent to the main beam at the rear of the bridge erecting machine, and the beam is fed by the beam transport flat car. The bridge is divided into left and right sections, and the beam erection sequence is: the right section is erected first, then the bridge erecting machine returns, and then the left section is erected.

Topic: Municipal bridge construction organization design scheme Municipal bridge Model of construction organization design scheme
Construction organization of electromechanical installation in a city design scheme
The project is located in a village. The construction area of the machine building is 6740M2, which is a reinforced concrete frame structure. The building has six floors, of which the area of the underground fire pool is 408M2; The warehouse has a building area of 1951M2 and two floors. It is a reinforced concrete frame structure.

Topic: Installation construction organization design scheme Mechanical and electrical construction organization design Construction organization design for electromechanical installation of office building
Earthwork excavation construction organization in a city design scheme
The building area of the clubhouse is 3145.57m2, including 992.5m2 above the ground and 2153.07m2 underground; The clubhouse has one floor above the ground, two floors locally, and two floors underground. The height of the underground floor is 4.5m, the height of the upper floor above the ground is 4.2m, the height of the local floor is 9.1m, and the total height of the building is 9.15m; The project is ± 0.000=56.50m, and the design elevation of anti floating water level is 53.000m. According to the architectural design plane design drawings, the overall height of the site is high in the south and low in the north, while the current site appearance of the construction site is low in the south and high in the north. Therefore, for the project as a whole, there is no doubt that the amount of earthwork excavation will be increased.

Topic: Construction organization design scheme Construction scheme for earthwork excavation and backfilling Ceiling organization design scheme
Construction organization of chimney shaft in a city design scheme
The erection scaffold of the central drum ring shall be a full hall scaffold, with the distance between the upright poles controlled at about 80cm. The erection area shall be a circle with a radius of 4.5m. The top surface shall be leveled with a level, and the scaffold board shall be fully paved and firmly bound. The bearing capacity of the scaffold shall be 5 times of the total weight of the central drum ring, radiation beam, support platform, and construction personnel, and the scaffold shall have strong stability.

Topic: Construction organization design scheme Ceiling organization design scheme Construction organization design scheme of primary school teaching building
Installation construction organization of a theater in a city design scheme
This project covers an area of 60147 square meters, including 58062 square meters of aboveground building area, 21504 square meters of underground building area, 79566 square meters of total building area, and 39.5 meters of total building height. This paper is the construction organization design of the electrical engineering, water supply and drainage engineering, ventilation and air conditioning engineering of this project.

Topic: Installation construction organization design scheme Ceiling organization design scheme Municipal bridge construction organization design scheme
Construction organization of landscape avenue in a city design scheme .
Purchase machine-made bricks according to the overall construction plan and conduct acceptance according to the factory certificate; The bricks shall be transported to the site, stacked in different specifications and levels, and signs shall be set on the stacking to indicate the variety, specification and strength level. Generally, the stacking height shall not exceed 1.6m, and passages shall be reserved between the stacking.

Topic: Construction Contract of Landscape Avenue Construction organization design scheme Organization construction design scheme
Construction organization of university apartment in a city design scheme
The project is located in a college in Beijing, with a total construction area of 634.80m2, and the structure is a two-layer brick concrete structure. The projects of the project in winter 2004 mainly include: roof concrete slab, roof leveling layer, roof waterproof works, roof tile works, external wall tiling, internal and external wall plastering, internal wall puttying, painting, coating, floor tile laying, external water supply and drainage works. The interior decoration of the project adopts the installation of heating. Before winter construction, all the window glasses are installed, and the indoor heating conditions are available. Therefore, the interior wall putty, paint and other indoor works can take appropriate measures to ensure the project quality

Topic: Construction organization design scheme Apartment fire protection design scheme University Sewage Treatment Organization Design Scheme
Landscape construction organization of a city scenic spot design scheme
The project is divided into two sections, the first section is from Hubin First Park to Qianwang Temple area, and the second section is from Qianwang Temple area to Changqiao Park. Qianwang Temple area does not belong to the scope of this bidding (see the construction plan for details). The main works of Section I include water body, small bridge, garden road and square pavement. The works of the second bid section include small bridges, square and garden roads, pavilions, etc.

Topic: Construction organization design scheme Ceiling organization design scheme Landscape construction organization
Construction organization of a project in a city design scheme
The project covers an area of [Hengzhi Tiancheng] m2, with a total building area of [Hengzhi Tiancheng] m2. The project consists of two floors underground, two floors above the ground, three to seven floors in the north, and three to nine floors in the south. The total height of the building is [Hengzhi Tiancheng] meters for the office building, [Hengzhi Tiancheng] meters for the commercial and residential building, and [Hengzhi Tiancheng] meters for the second floor underground, The floor height of the two above ground shopping malls is [Hengzhi Tiancheng] meters, the standard floor height of the commercial and residential buildings is [Hengzhi Tiancheng] meters, and the ± 0.00 indoor and outdoor height difference is 0.45 meters. Among them, the second underground floor is the garage, the warehouse of the farmers' market, the fire pool, the power distribution room, etc., and the first underground floor is the farmers' market.

Topic: Project construction organization design scheme Ceiling organization design scheme Construction scheme of a municipal drainage project
Construction organization of Deke Coal Mine in a city design scheme
As the main adit is arranged in the coal measure stratum, the rock is mudstone, sandstone and some Maokou limestone. According to the design requirements and considering safety, the principle of short excavation and short support is adopted to support in time and seal the surrounding rock as soon as possible.

Topic: Coal mine construction organization design Construction organization design and scheme Construction organization design and scheme
Sewage Phase II Construction Organization of a City design scheme
The pipeline works in the plant area of the WWTP project are comprehensive pipeline works, including various process pipelines, rainwater, sewage, wastewater and other pipelines. During pipeline construction, the sequence of pipeline construction must be well organized, and cross operations of various pipelines must be reasonably arranged.

Topic: Sewage treatment in a city Construction organization design scheme Construction organization and design scheme
Construction organization of ground heating in a city design scheme
The project leader of each building can add material personnel, technicians and safety and quality personnel. During the project hours, it can be directly managed by the Technology Department, Material Department and Quality Safety Department. Light foam cement construction team and floor heating pipeline construction manpower organization shall be set according to the construction area and progress requirements.

Topic: Construction organization design scheme Ceiling organization design scheme Construction organization design scheme of primary school teaching building
Construction organization of river regulation in a city design scheme
The engineering survey shall closely cooperate with the construction of various projects, strictly measure the vertical and horizontal axes of each section, and the elevation must meet the design and specification requirements. The survey results and various survey markers shall be carefully and timely disclosed to the construction technicians and operators, and the construction supervision shall be strengthened.

Topic: Construction organization design scheme River flood control River regulation and flood control
Pipeline gas construction organization in a city design scheme
The pipeline gas project in a city is an urban pipeline gas project approved by our province, relevant departments and the people's government. The annual gas supply capacity is 14 million cubic meters, covering the urban planning area of the city. The medium in the pipeline is natural gas. The municipal pipeline gas project consists of two parts, the gasification station part and the urban pipe network part, and the urban pipe network part includes the household project. The construction of the city's pipeline gas project is the first natural gas project in our province, which will have a significant impact and far-reaching significance on the development of natural gas in our province. This project is a medium pressure gas pipeline project. It starts from the natural gas valve station on the west side of Yingbin Avenue, runs eastward along the south side of Yingbin Avenue, passes through Yongfeng Road, Youzhuang Road and Huancheng South Road from Huancheng West Road, and then runs along Hongzhou along Yingbin Avenue to Ningbo Road; The pipeline runs from Qingping South Road to Hongzhou Road along Ningbo; Along the west ring of the city, the route is from Yongfeng Road to the ring of the city, then from Huancheng Road to Yingpan West Road along Mall Street, from Mall Street to Shaoshan North Road along Yingpan West Road, from Shaoshan North Road to Wenhua North Road along Yingpan East Road, and from Yingpan East Road to Beijing East Road along Wenhua North Road, as well as the residential and commercial users covered. The design pressure of the pipeline is medium pressure Class A 0.3MPa (gauge pressure). The total length of the trunk line is 15.13km, and SDR11 polyethylene pipeline is selected, of which the length of the pipeline with a diameter of de 250 × 22.7 is 0.95km; The pipeline length of de 200 × 18.2 is 10.31 km, and the pipeline length of de 200 × 18.2 is 0.95 km. The standard is GB/15558.1-1995, and the polyethylene pipe fittings of GB/15558.2-1995 are selected as the pipe fittings; Q235B steel pipe with a length of 2941m is selected for the crossing and the first branch line. The work quantity of the household is to be determined because there is no design drawing.

Topic: Pipeline construction organization design scheme Gas construction organization design Pipeline gas construction scheme
Construction Organization of Splendid Dragon City in a City design scheme
We fully accept all requirements related to the construction quality, construction progress, safe and civilized construction of the project proposed in the bidding documents, and implement all technical measures of the construction scheme.

Topic: Construction organization design scheme Ceiling organization design scheme Construction organization design scheme of primary school teaching building
Construction organization of Longines Park in a city design scheme
According to the distribution of the axis position of the building, it is proposed to intersect the horizontal axis with the vertical axis to form a grid, lay the horizontal control network of the secondary building, and set fixed control points and guard piles at positions not affected by construction.

Topic: Construction organization design scheme Design Scheme of Fire Hero Memorial Park Ceiling organization design scheme
Construction organization of a joint factory building in a city design scheme
The mechanized branch of the company gives priority to solving the problems of concrete machines and tools, reinforcement processing equipment, power generation equipment, vehicles and other machinery and tools, and specially assigned persons are responsible for ensuring the normal operation and use of machinery and tools.

Topic: Construction organization design scheme Plant construction organization design Fire protection construction design scheme of power house
Construction organization of anchor rod workshop in a city design scheme
The steel structural members can be processed in the factory using automatic production lines. The construction site is connected with high-strength bolts, which reduces the welding workload and fully guarantees the progress and quality.

Topic: Workshop construction organization design Construction scheme of anchor rod workshop Anchor rod construction scheme
Construction organization of outpatient building in a city design scheme
The main construction entrance of the project is located in Ziyang Road, and the traffic conditions have a great impact on the construction. During the continuous construction (mass concrete, structural layer concrete pouring, etc.), special personnel must be assigned to coordinate and contact the traffic.

Topic: Fire protection design of outpatient building Fire fighting construction scheme of outpatient building Construction organization design scheme
Construction organization of a finished product workshop in a city design scheme
Adopt on-site processing and install while processing; V-115N wall panels are processed in the factory, transported to the site by trailer and stacked at an appropriate location. The maximum panel length should be able to adapt to road conditions and trailer body length.

Topic: Workshop construction organization design Construction scheme of finished product workshop Construction organization of finished oil separator
Construction organization of a hotel in a city design scheme
The construction organization design is prepared by the construction unit according to the engineering design drawing, the project requirements and our comprehensive strength; Other contents and design modifications that are not within the scope of drawings shall be described separately.

Topic: Construction Scheme of Grand Hotel Construction organization design scheme Organization construction design scheme