Detailed construction scheme for installation and removal of external elevator

Uploaded on: 2020-09-08 13:51:14 come from: Construction documents / Building construction scheme / Elevator construction scheme

zero

4 points

High rise residential buildings A and B, located in the west of Ji'an Bridge South Road and the south of Limin Bridge Road, are all shear wall structures. In this project, one external elevator is installed in buildings A and B, and the building heights of buildings A and B are 66.62m respectively. In order to ensure the smooth vertical transportation of the secondary structure and indoor and outdoor decoration, the external elevator was installed in the first ten days of November.

Detailed construction scheme for installation and removal of external elevator - Figure 1

Detailed construction scheme for installation and removal of external elevator - Figure 2

Detailed construction scheme for installation and removal of external elevator - Figure 3

Detailed construction scheme for installation and removal of external elevator - Figure 4

Detailed construction scheme for installation and removal of external elevator - Figure 5

Click to download the source file now

Special statement: This material belongs to the sharing uploaded by users Downloaded content, only for learning, not for commercial use. If there is any copyright problem, please timely contact Station delete!

Collection

WeChat code scanning and sharing

Click to share

Related recommendations

Inspection Record of Safety Device of External Elevator
Lift the cage for three times to detect the sensitivity and reliability of the limit, and run at low speed near the limit

Topic: Subgrade construction safety record Design Fire Safety Record Safety technical disclosure of external elevator
External elevator on-site installation acceptance record.doc

Topic: Foundation of external construction elevator Safety technical disclosure of external elevator installation Construction Scheme for Installation of External Elevator
Quanzhou construction elevator foundation construction, installation and removal programme
The construction elevator of this project is installed on the outdoor natural floor. In order to ensure the safe use of the construction elevator, the foundation of the construction elevator is designed according to the "Operation Manual" of the construction elevator and the specific conditions of the site installation location.

Topic: Method statement for dismantling elevator Construction elevator foundation Quanzhou Construction Contract
Detailed construction of elevator installation, removal and splicing programme
The construction elevators will be arranged in stages throughout the structural construction phase, and the number of elevators will gradually increase with the rise of the structural height. Especially after the core barrel is constructed to 300m, because of the transportation needs of the subsequent decoration works and the conversion factors between the construction elevator and the permanent elevator, in principle, there will always be 4 elevators in operation, This will not only facilitate the transportation of personnel and materials during the construction phase, but also avoid the congestion of vertical traffic caused by the accidental failure of individual elevators.

Topic: Method Statement for Demolition and Installation of Elevator Lapping construction scheme Demolition of construction elevator
Detailed temporary power construction of a project programme
The construction area of this project is 4964 square meters, which is an office, canteen and dormitory building with two to four storey frame structure. Prefabricated pipe pile foundation, the upper part of which is a cast-in-place frame structure, using commercial concrete. The first floor height of the building is 3.90m and 3.0m, the standard floor height is 3.60m and 3.0m, the total height of the building is 13.50m, and the seismic fortification is Grade VII.

Topic: Construction scheme for temporary power supply of the project 10kv temporary power construction scheme
Detailed construction of temporary power for a project programme
The starting and ending mileage of this section is K211+000 ～ K223+000, with a length of 12km. The main work includes demolition works, subgrade works, bridges and culverts, tracks and other comprehensive works in front of the station. The area along the line of the bid section belongs to the marine climate in the middle and lower reaches of the Yangtze River. The climate is warm and the rainfall is sufficient. Rainstorms are frequent in summer, and the rainfall is small in September and October; It is hot in summer and cold in winter. The annual average temperature is 17 ℃~21 ℃, and the basic seismic degree is 6 degrees.

Topic: Construction scheme of temporary enclosure works Construction scheme of temporary drainage and sewage works Temporary contract for project construction
Construction organization design of elevator assembly and disassembly project for a building in Shanghai programme
Install the cage, adjust the clearance between each guide rail and standard section riser on the cage to be 0.4~0.6 mm, and adjust the meshing clearance between gear and rack to be 0.2~0.5 mm

Topic: Project construction organization design scheme Elevator installation construction organization design scheme Fire engineering design of a building
Safety technical disclosure of passenger cargo elevator assembly and disassembly project
Safety technical disclosure of people and goods elevator assembly and disassembly project. doc, which is detailed and rich, can be downloaded by netizens.

Topic: Code for Acceptance of Elevator Installation Technical disclosure for installation of passenger and freight elevators on construction site Technical engineering contract
Engineering safety technical disclosure of assembly and disassembly of passenger and freight elevators
1. The six disciplines of safety production must be observed when entering the site. 2. The assembly and disassembly personnel are not allowed to wear hard soled and high-heeled leather shoes, and they should dress flexibly. 3. Before assembly and disassembly, check slings, rings, hooks and other appliances, and do not operate with defects. 4. No operation is allowed without external scaffold when dismantling the elevator. 5. The removed parts shall not be placed in the ladder cage. 6. When removing the components that firmly support the bridge and guide bolt, the suspended operator shall fasten the safety belt with the guide rail or the building at their respective positions. 7. When disassembling, check and install the safety railings on the top of the ladder cage. During assembly and disassembly, a safety alert area must be set up, and a special person must be assigned for safety supervision.

Topic: Code for Acceptance of Elevator Installation Technical disclosure for installation of passenger and freight elevators on construction site Technical engineering contract
Detailed special safety construction for scaffold erection and dismantling programme
The project is located in Wangjiemen Village, which is a grinding station project invested by Tianshan Cement Co., Ltd. and consists of eight units, namely cement grinding, cement silo, packaging room, power distribution room and control room, fly ash silo, batching silo, crushing room and clinker silo. According to the actual situation, take the clinker silo as the preparation object, the external scaffold with a total height of 25 meters is enclosed by dense mesh.

Topic: Special safety construction scheme for scaffold Basis for preparation of special construction scheme for scaffold Special construction scheme for scaffold 2012
SC series construction elevator assembly and disassembly programme .doc

Topic: Sc series construction elevator installation construction scheme Foundation scheme of construction elevator Construction elevator foundation
SC series construction elevator assembly and disassembly programme .pdf

Topic: Sc series construction elevator installation construction scheme Foundation scheme of construction elevator Construction elevator foundation
Special construction of external construction elevator programme
Foundation positioning and foundation design parameters of construction elevator 1 # construction elevator is proposed to be located at the top plate of the basement, and 6000 * 4000 * 300cm elevator foundation is set separately. The thickness of concrete foundation slab is 300mm, and double-layer two-way reinforcement mesh is arranged: the diameter of reinforcement is C12mm, and the spacing is 200mm. The concrete strength grade is C30.

Topic: Special construction scheme for elevator Construction elevator foundation Demolition of construction lift
Complete CAD diagram of an external elevator and beam connection
The complete CAD schematic diagram of the connection between an external elevator and a beam, which includes the plan, elevation and design description of all directions, is accurate and comprehensive in design, detailed in content, and can be used for reference. All designers are welcome to download it~

Topic: Schematic diagram of elevator shaft Complete drawings Complete air defense
Detail Plan of CAD Construction Node for the Erection of an External Elevator
The detail plan of CAD structural node is set up for an external elevator, and the detail plan and renderings of CAD plane and elevation are completely planned. The individual building is consistent with the general layout, and the corresponding relationship between them is accurate. There are no errors, omissions, and flaws in the drawings. Welcome to download.

Topic: Elevator construction details Elevator Plan Details Plane construction details
External Elevator Safety Device Inspection Record.doc

Topic: Subgrade construction safety record Design Fire Safety Record Safety technical disclosure of external elevator
Safety technical requirements and acceptance.doc

Topic: Safety technical disclosure of external elevator Construction scheme of external elevator Foundation construction scheme of external elevator
Foundation construction, installation and removal of construction elevator programme . (Word format)
1. Project name: dormitory building of Quanzhou Haiqi Computer Software Co., Ltd. 2. Project location: Jiangnan Town, Quanzhou 3. Construction unit: Quanzhou Haiqi Computer Software Co., Ltd. 4. Survey unit: Fujian Quanzhou Hydropower Engineering Survey Institute 5. Design unit: Quanzhou Citong Architectural Design Institute 6. Construction unit: Fujian Jinjiang Seventh Construction Engineering Co., Ltd. 7 Supervisor: Fujian Qizheng Construction Engineering Group Co., Ltd. ① Project scale and floor area 4138.29 ㎡: 2.1 Project name: staff dormitory building 2.2 Project location: Jiangnan Town, Quanzhou 2.3 Construction unit: Quanzhou Haiqi Computer Software Co., Ltd. 2.4 This project is: staff dormitory building

Topic: Method statement for dismantling elevator Construction elevator foundation Foundation jacking scheme of construction elevator
Detailed construction of elevator installation works programme
The commissioning must be carried out after the installation of equipment in the machine room, hoistway and pit is qualified, and the introduction of three-phase five wire power supply by the owner is qualified. The material preparation before commissioning shall be complete: commissioning instruments, commissioning tools, special auxiliary materials for commissioning, etc. can be commissioned only after they are well prepared.

Topic: Construction Scheme for Elevator Installation Works Elevator installation contract Elevator installation process
Temporary power construction of detailed works programme
This project is the first phase project of the thermal power plant. The project mainly includes: boiler body, dry coal shed equipment, coal gallery, process pipeline, anti-corrosion and insulation, electrical equipment and thermal instrument installation. The construction area of the whole project is large, and various types of work cross more. The owner originally equipped a box transformer near the south side of the cooling tower with a transformer capacity of 500KVA. According to the owner's requirements, the box transformer transmits power to the site for temporary construction power, and the power consumption measurement is set in the main box of the power supply system; Two general distribution boxes and seven distribution boxes will be considered for temporary power supply. See the layout plan and trunk line layout plan for specific locations and areas

Topic: Construction scheme for temporary power supply of the project 10kv temporary power construction scheme
Temporary power construction of a detailed project programme
The railway is reconstructed in the northwest of a province. The starting and ending mileage of this section is K211+000 ～ K223+000, with a length of 12km. The main work includes demolition works, subgrade works, bridges and culverts, tracks and other comprehensive works in front of the station.

Topic: Construction scheme for temporary power supply of the project 10kv temporary power construction scheme
Detailed special construction of temporary power supply for construction programme
The power supply is led from the wiring point designated by the owner to the site distribution room, and then from the distribution room to each construction power point in succession. The entire site power supply is equipped with a distribution box. TN-S system shall be used for construction power supply, and the mandatory provisions of JGJ46-2005 and J405-2005 Technical Code for Safety of Temporary Electrification on Construction Site shall be strictly followed. Grounding and neutral protection of electric machinery and electric tools shall be well done to ensure their safe operation.

Topic: Special construction scheme for temporary housing See the special construction scheme Various special construction schemes
Detailed temporary power construction of a demolition project programme
The starting and ending mileage of this section is K211+000 ～ K223+000, with a length of 12km. The main work includes demolition works, subgrade works, bridges and culverts, tracks and other comprehensive works in front of the station. The area where the line passes through in this bid section belongs to the marine climate in the middle and lower reaches of the Yangtze River. The climate is warm and the rainfall is sufficient. Rainstorms are frequent in summer, and the rainfall is small in September and October; It is hot in summer and cold in winter. The annual average temperature is 17 ℃~21 ℃, and the basic seismic degree is 6 degrees.

Topic: Temporary electricity construction scheme
Calculation of steel pipe scaffold and detailed construction of installation and removal programme
The construction land area of the project is 23266.00m2, consisting of 11 16~20 storey high-rise buildings, with a total construction area of 94502.59 m2, including 10806.54 m2 of basement. Building height: 50.050 m~65.050 m. Building floor height: the first underground floor: motor garage and equipment room 4.80 m, non motor garage 4.20 m; 4.50 m on the first floor; 4.80 m on the second floor; 4.50 m on the third floor; 3.00 m above the fourth floor.

Topic: Calculation of steel pipe scaffold Steel pipe scaffold scheme Construction scheme of internal steel pipe scaffold
Detailed special construction of floor type scaffold erection and dismantling programme
The scaffold of this project adopts steel pipes with specification of φ 48mm and wall thickness of more than 3.0mm, and special rolling head accessories. The scaffold pieces are intact, with specifications of 1.2m × 1.0m and 1.5m × 1.0m. The dense mesh safety net is a product promoted by the Ministry of Construction, with a weight of more than 3KG and a specification of 6m × 1.8m.

Topic: Special construction scheme for floor scaffold Specification for floor type scaffold Construction specification for floor type scaffold
Safety technical disclosure record of passenger cargo elevator assembly and disassembly project
1. The six disciplines of safety production must be observed when entering the site. 2. The assembly and disassembly personnel are not allowed to wear hard soled and high-heeled leather shoes, and they should dress flexibly. 3. Before assembly and disassembly, check slings, rings, hooks and other appliances, and do not operate with defects. 4. No operation is allowed without external scaffold when dismantling the elevator.

Topic: Code for Acceptance of Elevator Installation Technical disclosure for installation of passenger and freight elevators on construction site Technical engineering contract
Safety technical disclosure of passenger cargo elevator assembly and disassembly engineering.pdf

Topic: Code for Acceptance of Elevator Installation Technical disclosure for installation of passenger and freight elevators on construction site Technical disclosure of exterior wall decoration engineering
Safety supervision outline of external elevator (passenger cargo elevator)
Content introduction External elevator refers to a dual-use elevator used for vertical transportation of materials and personnel in building construction. It is often attached to the outside of the building, so it is also called external elevator. （1） Safety device 1 Brake. Because people and goods elevators often carry people up and down during construction, the reliability of their operation is directly related to the safety of construction personnel. The brake is the main safety device to ensure the safe operation of the elevator. Due to the frequent starting and stopping of the elevator and the change of operating conditions, the brake is easy to fail, and the elevator cage slides down, resulting in accidents. Maintenance should be strengthened, and the automatic clearance adjustment mechanism should always be kept clean, and it should always be repaired in a timely manner. Action test verification shall be conducted during safety inspection. 4 pages in total

Topic: Safety technical disclosure of external elevator Foundation of external construction elevator Construction drawing of passenger and freight elevator
Installation of an external construction elevator programme
Basic scheme: The lift foundation is made of reinforced concrete platform. Concrete strength grade is C30, foundation reinforcement: two-way φ 10@250 The dimensions of the elevator foundation are shown in Figure 2. In order to facilitate loading, the plane elevation of the reinforced concrete foundation of the external construction elevator is 200MM lower than the outdoor floor. Drainage ditches are set around the foundation.

Topic: Installation quota worker Safe and civilized construction scheme Construction Scheme for Installation of External Elevator
Construction organization of common elevator shaft platform programme
The project has 24 floors above the ground, the cornice height is 81.50m, and the group houses have two floors, with a height of 9m. The first to second floors above the ground are frame supported shear wall structures, with a single floor area of about 900m2. There are two elevator shafts in the residential area. The elevator shaft of this project uses a platform welded with channel steel and angle steel for construction. The lower part is supported by hook bolts through reserved holes on the wall.

Topic: Construction scheme of elevator shaft platform Elevator shaft protection construction scheme 1 Construction scheme for elevator shaft pile cutting
Scaffold erection and dismantling construction of a project programme
The project is composed of 9 rooms and an underground garage, with six floors. The structure is brick concrete structure, with a total height of 17.85m, and is an ordinary scaffold below 30m. Therefore, single standing and double row steel pipe scaffolds are used for erection

Topic: Scaffold erection and dismantling construction scheme Specification for erection, dismantling and use of scaffold Specification for erection and dismantling of external wall scaffold
Special construction of formwork support erection and removal programme
This project is a high-rise residential building located at xxx; The total construction area is 20405.7 ㎡, with 25 floors above the ground and one floor underground; The structure type is shear wall structure. The floor height of the basement within the main building is 4.2 meters, the floor height of the basement within the non main building is 3.3 meters, and the floor height above the ground is 3 meters.

Topic: Special construction scheme for support formwork Special construction scheme of formwork Construction Scheme of 5m High Formwork Support
Safe construction of common derrick erection and dismantling programme
The project is located in the plot west of Jingba Road and north of Renmin East Road, and consists of four multi-storey residential buildings and conjoined shops. The total construction area of the project is 17093m2; The area of House 7 # is 4417.9m2, and the first floor of the five storey brick concrete structure is a frame structure with a total height of 19.8m; Room 9 # has an area of 2853.2m2 and is a three story row frame structure with a total height of 12.1m; Room # 11 has an area of 4843.1m2 and a five storey brick concrete structure, of which the bottom layer is a frame structure with a total height of 19.8m; Room 12 # has an area of 4978.8m2 and a five storey brick concrete structure, with a total height of 19.8m; The outdoor natural floor elevation of the project is equivalent to the absolute elevation of 5.750m, and the indoor and outdoor elevation difference is 0.15m

Topic: Safety construction scheme for derrick erection and dismantling Method Statement for Formwork Erection and Dismantling Scaffold erection and dismantling construction scheme
Detailed installation and removal construction of QTZ63 tower crane programme
The installation and removal machines and tools are mainly the special tools attached to the tower crane and truck crane without special circumstances. According to the actual situation of the project, 25T truck crane is selected for installation and 25T truck crane is selected for disassembly. Installation of chassis: levelness<1/1000, and the contact area between chassis and foundation is greater than 90%.

Topic: Lifting construction scheme Demolition construction scheme of tower crane Construction scheme for tower crane installation
Special construction of construction power programme (including detailed calculation)
This document is a special construction scheme for construction electricity (including detailed calculation), including: (1) excerpts of the contents: (1) electrical equipment on the fire line is overloaded for a long time due to overload of the electrical line, and the use current exceeds the safe carrying capacity of the conductor. At this time, if the selection of protective device is unreasonable, and the wire core overheats, the insulation layer will be damaged and burned, causing a fire. (2) The fire caused by the short circuit of the line is caused by the short circuit of the line due to the insufficient safety distance of the wire, the insufficient insulation grade, the aging, damage, or careless human operation. The strong short circuit current quickly converts into heat energy, causing serious heating of the wire, rapid temperature rise, resulting in melting of the wire, burning of the insulation layer, causing fire, etc.

Topic: Special construction scheme for construction electricity Construction electricity agreement Construction electricity contract
Detailed construction of temporary power supply for thermal power plant programme
The project mainly includes: boiler body, dry coal shed equipment, coal gallery, process pipeline, anti-corrosion and insulation, electrical equipment and thermal instrument installation. The construction area of the whole project is large, and various types of work cross more. The owner originally equipped a box transformer near the south side of the cooling tower with a transformer capacity of 500KVA. According to the owner's requirements, the box transformer transmits power to the site for temporary construction power, and the power consumption measurement is set in the main box of the power supply system; Two general distribution boxes and seven distribution boxes will be considered for temporary power supply. See the layout plan and trunk line layout plan for specific locations and areas. This document is the construction organization design for temporary power utilization of the thermal power plant, with 15 pages in total.

Topic: Demolition construction scheme of thermal power plant Construction scheme for temporary power supply of new power plant Safe construction scheme for thermal power plant in winter
Detailed construction of temporary electricity on construction site programme
Technical measures for safety of temporary electricity use include two aspects: first, technical measures for safety of electricity use; Second, various organizational measures are taken to ensure the safe use of electricity and the reliability of power supply, including the establishment of various systems, organization and management, etc.

Topic: Temporary construction scheme on construction site Temporary contract on construction site Temporary Agreement on Construction Site
Detailed temporary power construction on construction site programme
The project adopts frame shear wall structure, which is a class I high-rise building with a total building area of 40900m2, of which the basement area is about 1922.2m2. 1 floor underground, 23 floors above the ground, and 24 floors of local machine rooms;. The main building is 114.4 meters long, 18.0 meters wide and 79.92 meters high.

Topic: Construction scheme for temporary electricity on site Construction site temporary power ppt 10kv temporary power construction scheme
Detailed temporary power supply construction of a power distribution room project programme
The power for the construction of the project is supplied by the distribution room provided by Party A, which enters the main power box at the construction site. Three phase five wire cables are buried and laid to two main power distribution boxes and distributed to the designated location. The office power supply is a specially designed circuit. The lighting around the site and on the construction surface is provided by the searchlights fixed on the tower body. The on-site indoor lighting must be provided by the special lighting sockets or switches in the secondary power box.

Topic: Temporary electricity construction scheme Specification for temporary power distribution box Standard for temporary power distribution box
Detailed temporary power construction of a business building in Shandong programme
The project is a four story frame structure (five stories locally), with a building height of 16.05m and a building area of 5654m2. The project is a reinforced concrete frame structure, and the foundation is an independent reinforced concrete foundation. Cast in situ reinforced concrete frame columns, beams and slabs are made of C30 concrete; The infilled wall is made of M5 mixed mortar and MU10 aerated concrete blocks.

Topic: Temporary electricity construction scheme Construction scheme of business building Construction Contract for Temporary Electricity