Detailed construction organization design scheme of a bridge project

Uploaded on: August 17, 2020 17:39:15 come from: Road and bridge municipal administration / Road and bridge works / traffic engineering

zero

4 points

The design scope of the project is K0+082 to Junshan Road intersection (including Junshan Road intersection), and the total length of the main line is about 744m. This place belongs to the alluvial plain of the Yangtze River Delta, and the landform is relatively simple. The Xicheng Canal is about 80m wide, and the old Xicheng Canal is about 50m wide. The ground elevation is about 4.45m, and the terrain is relatively flat. The ground elevation of the island at the main pier is about 3.3m.

Detailed construction organization design scheme of a bridge project - Figure 1

Detailed construction organization design scheme of a bridge project - Figure 2

Detailed construction organization design scheme of a bridge project - Figure 3

Detailed construction organization design scheme of a bridge project - Figure 4

Detailed construction organization design scheme of a bridge project - Figure 5

Click to download the source file now

Special statement: This material belongs to the sharing uploaded by users Downloaded content, only for learning, not for commercial use. If there is any copyright problem, please timely contact Station delete!

Collection

WeChat code scanning and sharing

Click to share

Related recommendations

Construction organization of a bridge project in a city design scheme
This project is the D section of GN Avenue, and the viaduct is adopted for the whole main line. The project mainly includes the main line viaduct and ramp, drainage, pedestrian overpass and other projects. The construction height of the bridge works is up to 22.8m, divided into two layers and four lines in total. The main line of the lower layer line b is 496.449m long, and the total length of the B ramp is 316.213m; Line a on the upper layer is 513.545m long, and Ramp A is 380.314m long. The foundation adopts bored (punched) cast-in-place piles with diameters of 1.2m and 1.5m.

Topic: Construction organization design of a bridge project Construction scheme of bridge works Construction scheme of a bridge project
Construction organization of Chenjiagou Bridge Project design scheme
According to the distribution of this bridge and considering the economy of concrete and beam forming transportation, a prefabrication yard is set up on the completed subgrade of K36+300-K36+600 excavation section, with 12 pedestals.

Topic: Construction organization design of a bridge project Bridge engineering survey scheme Bridge engineering data
Bidding construction organization of a road and bridge project design scheme (Print)
This document is the bidding construction organization design scheme (print) of a road and bridge project, which is detailed and can be used for reference.

Topic: Construction organization design of a bridge project Bridge engineering survey scheme Bridge engineering data
Implementation construction organization of national highway and bridge works design scheme
This data is the implementary construction organization design scheme of 312 National Highway Bridge Project, which can be used for reference.

Topic: Construction organization design of a bridge project Practical construction organization design of tunnel Bridge engineering survey scheme
Organization of bridge works of first-class highway design scheme
The starting and ending chainages of the project are K0+000 ～ K1+422.36, with a total length of 1.422km; the starting and ending chainages of the viaduct are K0+403.5 ～ K0+801.87, with a total length of 398.37m, including 300.04 bridge spans and 88.08m approach bridges. The overall structure of the bridge is a simply supported beam system, which is a straight bridge. The total width of the bridge is 19 meters. The piers are double column piers, large cantilever cap beams, and 40 friction pile foundations with a diameter of 1.5 meters.

Topic: Code for design of highway bridge engineering Contract for Highway and Bridge Works Ranking of Highway and Bridge Engineering
Anqing Yangtze River Bridge Project Organization design scheme
According to the shape characteristics of the tower body, the middle tower column is constructed by climbing frame turnover technology, and the upper tower column is constructed by scaffolding turnover technology. ф 48 × 3.5mm steel pipe fastener scaffold shall be erected around the upper tower column to form a closed operating platform, so as to facilitate the circumferential prestress of the tower column and the need of later cable hanging construction.

Topic: Municipal bridge engineering design Construction organization design of a bridge project Bridge engineering survey scheme
Implementation organization of national highway and bridge engineering design scheme
Implement project management, optimize the allocation of production resources and production factors by using network planning technology, and ensure that the expected goals of cost, duration, quality, safety and social reputation are achieved.

Topic: Municipal bridge engineering design Construction organization design of a bridge project Bridge engineering survey scheme
Word for construction organization design of bridge works
The public infrastructure (road works) of the tourist service center of xxxxx tourist resort is located in the tourist service center area of xxx tourist scenic spot in Taizhou. The construction is to meet the growing tourism demand and improve the regional traffic network, which is of great significance to promoting the development of the local tourism economy. The company will take high-quality, strictly abide by the contract, control the cost, establish an image, and strive for higher social reputation as the guiding ideology, fully understand the design intent, based on modern, professional, mechanized, standardized construction, and combined with the construction period and the actual situation of the project construction, carry out targeted overall analysis, key process arrangement, special consideration for special parts, Scientific organization and management, reasonable site layout, practical scheme, high-quality, safe and efficient completion of the construction task of this project, and a satisfactory answer to the owner and the public.

Topic: Construction organization design of a bridge project Bridge engineering data Bridge works agreement
Construction organization design of municipal bridge engineering
This project is the 9th bid section of No. 1 Bridge in the south of Harbin Hejiagou Comprehensive Renovation Project. The project is located along Hejiagou in Harbin. With a span of 16 meters, Chengnan No. 1 Bridge is 22.74 m long, 10 m wide, and 227.4 m2 of new bridge area.

Topic: Construction organization design of municipal bridge engineering Code for construction acceptance of municipal bridge engineering Specification for construction and acceptance of municipal bridge engineering
Construction organization design data of bridge works
The construction organization design of the highway bridge: the construction organization design is based on the Bidding Document for the Pilot Section Reconstruction Project of S243 Provincial Highway (Qiantang Guozhuang Section) provided by the current owner, The construction drawings of Bid S243JRQL3 of the pilot section reconstruction project of S243 Provincial Highway (Qiantang Guozhuang Section), the supplementary documents for bidding and question answering, and the construction organization design organized and prepared based on the field survey.

Topic: Bridge engineering data Construction organization design of a bridge project Construction organization design of field bridge engineering
Special Construction Organization Design.doc

Topic: Construction organization design of a bridge project Special construction scheme for bridge works Bridge engineering data
Special construction organization design for bridge engineering.pdf

Topic: Construction organization design of a bridge project Special construction scheme for bridge works Bridge engineering data
Pushing construction organization design of bridge works
The construction organization design is for the construction organization design of the overpass crossing Beijing Harbin Railway on the connecting line project of Qinhuangdao Coastal Expressway Funing Section. Although it is a Class II highway, the construction technology still has technical content.

Topic: Construction organization design of a bridge project Bridge engineering data Bridge works agreement
Construction organization design of bridge works (complete)
The project is XXX. Due to the impact of long-term scouring, the revetment at both sides of the bridge bottom has been hollowed out, and the cushion cap and pile foundation of the maintenance stairs are exposed, which seriously affects the safety of the bridge foundation. In order to ensure the safety of stair handrails, it is necessary to reinforce and maintain the revetments at both sides of the bridge bottom, and reinforce the cushion caps of the maintenance stairs. The main quantities include: silt excavation, filling, steel pipe bored cast-in-place pile, mortar block material, light colored granite veneer outside the retaining wall, and light colored granite guardrail.

Topic: Construction organization design of a bridge project Bridge engineering data Bridge works agreement
Disclosure record of municipal bridge engineering construction organization design (scheme) (1)

Topic: Municipal bridge construction organization design scheme Construction organization design scheme disclosure Municipal bridge
Construction organization design of bridge works (complete structural scheme)
The construction organization design of bridge works (241 pages in total, complete structural scheme) is detailed for designers' reference.

Topic: Construction organization design of a bridge project Bridge engineering survey scheme Construction Scheme for Superstructure of Bridge Works
Detailed construction organization design of bridge works of first-class highway
The starting and ending chainages of the project are K0+000 ～ K1+422.36, the total length of the line is 1.422km, the starting and ending chainages of the viaduct are K0+403.5 ～ K0+801.87, the total length of the bridge is 398.37m, of which the total length of the bridge span is 300.04, and the total length of the approach bridge is 88.08m. The overall structure of the bridge is a simply supported beam system, which is a straight bridge.

Topic: Code for highway bridge engineering Contract for Highway and Bridge Works Ranking of Highway and Bridge Engineering
Construction organization scheme for temporary power supply of bridge works
Chongde East Bridge (B5 Bridge) is located on Longzi Lake, Longzi Lake District, Zhengdong New District, where Mingli Road crosses Longzi Lake. The project starts at K0+082.332 and ends at K0+185.412, with a total length of 103.08m. The horizontal alignment of the road within the project scope is straight line, and the maximum longitudinal slope of the whole line is 1.37%. The bridge design adopts a simple and distinct structural form, which is a three span continuous box girder structure. The middle span is 40m, and the side span is 25m. The proportion of side span and middle span is reasonable, with good mechanical characteristics and visual effects. The bridge deck is arranged with 8m sidewalks and non motorized lanes on both sides and 12m+15m carriageway in the middle.

Topic: Temporary water and electricity construction scheme for bridge works Construction organization design of a bridge project Bridge engineering survey scheme
Practical construction organization of a city's national highway bridge project design scheme
It is located in the middle of southern Jiangsu and the densely populated urban belt of the Yangtze River Delta, bordering Yixing City and Zhejiang Province in the south, Taihu Lake in the east, Yangtze River in the north, Maoshan Hill in the west, Suzhou Hangzhou Plain in the east, and Beijing Hangzhou Grand Canal in the middle.

Topic: Construction organization design of a bridge project Practical construction organization design of tunnel Bridge engineering survey scheme
Bidding construction organization of a road and bridge project in Hangzhou, Zhejiang design scheme
The * * Road Project in Hangzhou City is located on the south bank of the Qiantang River. The line passes through two geomorphic units of different origins, namely, the Qiantang River alluvial marine geomorphic unit (al-mQ43) and the lake marsh facies sedimentary geomorphic unit (l-hQ42). Gutang Road is the dividing line. Generally, the surface has been reclaimed as farmland, nursery or residential land, and the composition is Holocene upper group loam, silt or Holocene middle group loam, sandy soil. The site is relatively flat, with some slight fluctuations.

Topic: Construction organization design of a bridge project Bridge engineering survey scheme Bridge engineering data
Implementation construction organization of 312 national highway bridge project design scheme
This section is all bridge works, with a total length of 873.08m, of which: the old Wuyi Canal Bridge is 459.40m long, crossing the old Wuyi Canal (Class VI navigation), the main bridge of the superstructure is a prestressed concrete continuous box girder with variable cross-section, and the left and right piers are staggered (39.3+55+32.7m left and 32.7+55+39.3m right), The approach bridge adopts 25m fabricated partially prestressed concrete continuous beam which is simply supported first and then continuous.

Topic: Construction organization design of a bridge project Practical construction organization design of tunnel Bridge engineering survey scheme
Bid construction organization of road and bridge works in a certain place design scheme
This data is the bidding construction organization design scheme of a road and bridge project, which is detailed and can be used for reference.

Topic: Construction organization design of a bridge project Bridge engineering survey scheme Bridge engineering data
Construction organization of bridge works in a bid section of Guangzhou Zhuhai Railway design scheme
Labor protection articles and safety protection articles (helmets, safety belts, safety nets, leakage protectors) entering the site shall be carefully inspected, and unqualified products shall not be issued for use
Implementation construction organization of 312 national highway bridge project design scheme
This section is all bridge works, with a total length of 873.08m, of which: the old Wuyi Canal Bridge is 459.40m long, crossing the old Wuyi Canal (Class VI navigation), the main bridge of the superstructure is a prestressed concrete continuous box girder with variable cross-section, and the left and right piers are staggered (39.3+55+32.7m left and 32.7+55+39.3m right), The approach bridge adopts 25m fabricated partially prestressed concrete continuous beam which is simply supported first and then continuous. The substructure adopts column pier, ribbed slab platform and pile foundation; The new Wuyi Canal Bridge has a total length of 360.20m, spanning the planned new Wuyi Canal (Class VI navigation). The main bridge of the superstructure is a prestressed concrete continuous box girder with variable section, staggered piers arranged at the left and right sides (left side 42.4+75+59.6m, right side 59.6+75+42.4m), thin-walled piers used at the lower part, and bored cast-in-place pile foundation; The approach bridge adopts 25m prefabricated partially prestressed concrete continuous beam which is simply supported first and then continuous, the lower part adopts column pier, and the abutment adopts pile column type; The total length of Donghoushu River Medium Bridge is 53.48m. The superstructure is 3-16m prestressed concrete hollow slab, simple supported structure, continuous deck, and the substructure is column pier and pile foundation.

Topic: Construction organization design of a bridge project Practical construction organization design of tunnel Bridge engineering survey scheme
Detailed drawing of general design for approach slab of a bridge project
This data is a general design drawing of approach slab for bridge engineering. The design is accurate. The drawings include the reinforcement layout of abutment approach slab and the auxiliary reinforcement of approach slab. The drawings are complete and worthy of reference.

Topic: Introduction to Bridge Engineering Municipal bridge works Bridge Engineering
Organization of a bridge project in Jiangyin urban area design scheme
The route of the project is in Jiangyin City, so the traffic is very convenient. The materials used in the project can be transported by road or water. Jiangyin has a sound communication system, and both fixed and mobile communications can serve the project construction. The water and electricity supply along the line is good, and the Owner has coordinated to solve the water and electricity supply, which can meet the production and living needs.

Topic: Municipal bridge engineering design Construction organization design of a bridge project Bridge engineering survey scheme
Organization of first-class highway bridge engineering in a city design scheme
The starting and ending chainages of the project are K0+000 ～ K1+422.36, with a total length of 1.422km; the starting and ending chainages of the viaduct are K0+403.5 ～ K0+801.87, with a total length of 398.37m, including 300.04 bridge spans and 88.08m approach bridges. The overall structure of the bridge is a simply supported beam system, which is a straight bridge.

Topic: Code for design of highway bridge engineering Contract for Highway and Bridge Works Ranking of Highway and Bridge Engineering
A road and bridge engineering organization in Hangzhou design scheme
The current situation of the project is convenient road, and there is no existing drainage system. The project adopts rainwater and sewage separate drainage system. Rainwater and sewage pipes are arranged under the green belt and sidewalk on both sides of the road in the near future.

Topic: Hangzhou Lighting Code Municipal bridge engineering design Hangzhou Lightning Protection Facilities Testing Institute
Anqing Yangtze River Highway Bridge Engineering Organization design scheme
6 × 19-43-1700 steel wire rope is selected for this project, and its safety factor K=1190/203=5.9 meets the requirements. The north bank of the bridge site area is Class I terrace and Class II terrace of the high river floodplain of the Yangtze River. The riverbed is 1655m wide. The thickness of the Quaternary overburden is 23~36m, and the thinnest is 8.5m at the north side of the riverbed.

Topic: Code for design of highway bridge engineering Contract for Highway and Bridge Works Ranking of Highway and Bridge Engineering
Bidding construction of a road and bridge project in Hangzhou design scheme
In order to reduce the settlement and uneven settlement after the completion of the project and ensure that the bearing capacity of the foundation meets the requirements, the project adopts vacuum combined surcharge preloading method, surcharge preloading drainage consolidation method, high-pressure rotary jet grouting pile and cement mixing pile and other methods to strengthen the silt soft subgrade.

Topic: Bridge engineering survey scheme Bridge engineering data Bridge works agreement
Construction Organization Design of Bridge Engineering (2). pdf

Topic: Construction organization design of a bridge project Bridge engineering data Bridge works agreement
Construction organization design of bridge works (very complete). pdf

Topic: Construction organization design of a bridge project Bridge engineering data Bridge works agreement
Construction Organization Design of No. 1 Bridge Project in Ma'an District
Ma An Area No. 1 Bridge Project; Ma'an Regional Bridge No.3 Project is located in Ma'an Island, Zhongshan Torch Development Zone, invested and built by Zhongshan Torch Development Zone Coastal Industrial Park Development Co., Ltd. Including No. 1 bridge with width of 42m, length of 45m and maximum single span of 22m; No. 3 bridge is 50m wide, 70m long, and the maximum single span is 25m.

Topic: Construction organization design of a bridge project Bridge engineering data Bridge works agreement
Municipal bridge engineering - construction organization design of a bridge (2)

Topic: Municipal bridge Model of municipal bridge construction organization design Bridge construction organization design
Construction Organization Design of Double Tower Cable Stayed Bridge in Bridge Engineering
Xxxxxx is located at about 2km downstream of xxxx in the south of xx urban area. The south bank starts from xx, and the north bank ends at the second ring underpass bridge of Fumin Street. The whole project consists of the main bridge, the approaches on both banks and their ancillary works. It is the main project of the new trunk road crossing xx from the urban area to Hunnan Development Zone.

Topic: Construction scheme of double tower cable-stayed bridge Construction organization design of a bridge project Construction organization design of field bridge engineering
Construction organization design of a municipal bridge project
The project is located in the northeast of Guangzhou. The starting point of the project is from the southwest side of Helong Reservoir in Taihe Town, which intersects the North Second Ring Expressway and connects with Beijing Zhuhai Expressway. The main line of this section is 1912km long, and the Cencun Interchange Ramp is 2.52355km long.

Topic: Construction organization design of municipal bridge engineering Code for construction acceptance of municipal bridge engineering Specification for construction and acceptance of municipal bridge engineering
Construction organization design of a landscape bridge project
XX Investment Corporation plans to build the second phase road of XX South Road in the planning area of XX New Town. The contract section of this project starts at K0 ＋ 000 and ends at K0 ＋ 560. This section is 560 meters long. A south bridge across the "Landscape XX Lake" will be built between K0 ＋ 316.2 and K0 ＋ 476.2. The proposed south bridge is a three span prestressed concrete continuous box girder, with single spans of 45m, 70m and 45m respectively. The bridge is 160m long and 39.5m wide, roughly in east-west direction. It is an urban bridge, with a design deck elevation of 10.12-11.02m. The bridge plane is located on the left circular curve with R=360m, and the longitudinal plane is located on the vertical curve formed by the design longitudinal slope of 1.9% and - 1.9%. The radius of the vertical curve is R ＝ 3500m, and the depth of soft soil at the bridge site is up to 5-10m.

Topic: Construction organization design of a bridge project Bridge engineering data Bridge project contract
Construction organization design of a road and bridge project
This paper includes road construction, rainwater pipeline construction, sewage pipeline construction, bridge construction (PHC prestressed concrete pipe pile (type B) is used for the substructure, with a pile length of 42 meters, portal column, reinforced concrete light cushion cap, and abutment. The superstructure adopts prestressed reinforced concrete hollow slab beam, etc.

Topic: Construction organization design of a bridge project Bridge engineering data Bridge project contract
Construction organization design of new bridge works
The bridge is (2 × 30)+40+(2 × 30) m fabricated prestressed concrete continuous box girder, the substructure adopts double and three column piers and abutments, and the bored pile foundation. The total length of the bridge is 167m. The pier cap beam is 1.95m wide and 1.5m high, the pier column diameter is 1.5m, the pile foundation diameter is 1.8m, and the tie beam at the pile top is 1.5m high and 1.9m wide; The abutment capping beam is 1.7m wide and 1.3m high, and the diameter of abutment pile foundation is 1.5m.

Topic: Construction organization design of new bridges New Bridge Construction Contract Bridge engineering data
Detailed construction organization design of a road and bridge project in Hangzhou
The project is K3 ＋ 515.370 ～ K3 ＋ 918.060 section, with a bridge length of 390.69m, which is divided into main bridge and approach bridge; The approach bridge on both sides adopts 4 holes (north) and 7 holes (south) 25m fabricated post tensioned prestressed concrete simply supported hollow slab beam, and the main body is a three span 31m+44m+31mV pier fabricated prestressed concrete continuous T-beam bridge; The full width of the bridge deck is 38m.

Topic: Hangzhou Lighting Code Construction organization design of a bridge project Hangzhou Project Cost and Construction Contract