-
-
There are six ISO15552 guide device cylinder models. The guide cylinder can avoid sintering even when the lubricant flows out, and avoid corrosion of the guide parts. Insert the piston rod into the central inner hole of the cylinder barrel with guide cylinder
-
5 kinds of ERHSK-A50-ISO12164-1-ER collet models, collets, clamping parts on tools, tools connecting the mechanical spindle with tools and other accessory tools. Usually used on drilling and milling machines and machining centers. There are many kinds of collets, such as rear pull type tool holder collet, CNC tool holder, CNC precision high-speed deep hole tool collet, etc. It also contains the ERHSK-F63-ISO12164-1-ER collet model
-
The five ISO7388-1 hydraulic expansion tool handles will push the sealing block of the piston to generate a hydraulic oil pressure in the tool handle when the bolt is tightened. The pressure is evenly transmitted to the steel expansion sleeve from the circumferential direction, and the expansion wall clamps the tool. Include stp format
-
The 6 ISO26623-1 hydraulic expansion tool handles, with their anti vibration damping characteristics, can allow a large cutting depth (Figure 2). Especially when the tool detection range is large, the clamping system can achieve good manufacturing quality. The precision is slightly lower than that of hydraulic tool handle, but the cost is relatively low and the structure is simple. It is preferred by most users
-
A tool used to check the position of ISOFIX+Topther, the child seat mounting anchorage, in GB14167-2013 or ECER14. This document contains two formats: CATIA and STP. CATIA requires V5R2016 or above
-
-
-
-
-
-
BS EN Water supply and fire fighting valve manhole details
The detailed drawing of valve inspection well of Mauritius Airport Project is applicable to the construction of outdoor fire and water supply inspection well of British BS EN and international projects and is submitted for approval.
-
AC-BS-W servo elastic coupling.. Elastic coupling uses parallel or spiral grooving system to adapt to various deviations and accurately transmit torque. Elastic coupling usually has good performance and price advantages. In many practical applications of stepping and servo systems, elastic coupling is the preferred product
-
-
-
-
-
There are three types of ERHSK-A40-ISO12164-1-ER collet models, which are used by three types of lathes and robots. The collet is a locking device for clamping tools or workpieces, usually used on drilling and milling machines and machining centers. The solidworks 2016 version is designed without parameters, editable, including STP format
-
Three ISO4401-03 integrated electronic component proportional pressure control valve models. The proportional pressure control valve is a new type of self operated regulating valve. Compared with manual control valve, it has the advantage of automatic adjustment; Compared with the electric control valve, it has the advantage that no external power is needed
-
-
Four VG-ISO-22 way diaphragm valves are cast with 4200 models. The advantage of the diaphragm valve is that its operating mechanism is separated from the medium passage, which not only ensures the purity of the working medium, but also prevents the possibility of the medium in the pipeline impacting the operating parts of the operating mechanism
-
9 models of Z4M-ISO4401 pilot pressure reducing valve. The pressure reducing valve is a valve that reduces the inlet pressure to a certain required outlet pressure through regulation, and automatically maintains the outlet pressure stable by relying on the energy of the medium itself. The model design tree is very detailed, including stp format
-
-
-
-
This set of injection mold is a national standard AC gun head+gun head press plate (vehicle end), with 2+2 holes. The plastic material is ARV250HF. The mold structure is a structure of Haval sliding blocks colliding with each other, and the sliding blocks are submerged into the casting. It is in the form of two plate mold cold runner
-
BS air pressure booster cylinder The six sets of direct pressure booster cylinders are improved by combining the advantages of the cylinder and the oil cylinder. The hydraulic oil is strictly isolated from the compressed air. The piston rod in the cylinder automatically starts after contacting the working parts. The action speed is fast, and it is more stable than the pneumatic transmission. The cylinder block device is simple, and the output is easy to adjust. Under the same conditions, the high output of the oil press can be achieved with low energy consumption, Soft landing does not damage the mold, easy to install, and the special booster cylinder can be installed at any angle of 360 degrees, which takes up less space, has few failures and no temperature rise problems, has long service life, low noise, and other core characteristics
-
-
-
-
-
-
-
BS EN 480-10 2009 Concrete
This data is: BS EN 480-10 2009 Concrete, mortar and grouting mixture, test method, determination of water soluble chloride content, which is detailed and can be used for reference.
-
Two ISO15552 hydraulic brake cylinder models, pneumatic actuators that convert the pressure energy of compressed gas into mechanical energy in pneumatic transmission. There are two types of cylinders for reciprocating linear motion and reciprocating swing. Cylinders for reciprocating linear motion can be divided into single acting cylinder, double acting cylinder, diaphragm cylinder and impact cylinder
-
The seven 2104ISO clamp pneumatic volume T-valves change the angular displacement or linear displacement output by the actuator according to the control signal from the regulator, and change the flow of the regulated medium through the regulating mechanism, so that the production process can meet the predetermined requirements. Model contains stp format
-
Seven types of VSISO clamp - 22 way diaphragm valve, forged valve body, clamp connection, DN15-50, the structure of the diaphragm valve is very different from that of ordinary valves. It is a new type of valve, a special type of block valve. Its opening and closing parts are a diaphragm made of soft materials, which separates the valve body cavity from the valve cover cavity and drive components. Now it is widely used in various fields
-
There are seven 2104ISO pneumatic volume T-type valve cores. The flow control valve is also called self operated balance valve, flow control valve, flow controller, dynamic balance valve, flow balance valve. It is an intuitive and simple flow control device
-
-
Abbot self-propelled gun is a fire support howitzer developed as a fast and light substitute for Sexton SPG in WW2 era. It consists of a 105mm howitzer mounted in a fully traversable turret on the top of the FV430 series car body. The VE (Value Engineering) version of SPG is a cheaper model manufactured for India, without some advanced functions of the original version, such as NBC protection equipment, flotation screen, power gun operation or communication