Technical disclosure of brick masonry construction

Uploaded on: 2020-05-07 16:37:17 come from: electrical engineering / Electrical construction design / Construction disclosure

zero

4 points

1.1 Non accessible insulation roof 15~20 thick 1:2.5 cement mortar leveling (laying woven wire mesh protective layer) APP waterproof coiled material one layer 40 thick C20 fine aggregate concrete (with Φ 4 @ 200 two-way) resin hydrophobic perlite slope making, the thinnest part 60 (slope I=3%) APP waterproof coiled material one layer 20 thick 1:2.5 cement mortar leveling reinforced concrete roof panel

Technical disclosure of brick masonry construction engineering - Figure 1

Technical disclosure of brick masonry construction engineering - Figure 2

Technical disclosure of brick masonry construction engineering - Figure 3

Technical disclosure of brick masonry construction engineering - Figure 4

Click to download the source file now

Special statement: This material belongs to the sharing uploaded by users Downloaded content, only for learning, not for commercial use. If there is any copyright problem, please timely contact Station delete!

Collection

WeChat code scanning and sharing

Click to share

Related recommendations

Technical disclosure of general brick masonry works
（2） Material requirements 1. Brick: the variety, specification and strength grade must meet the design requirements, and there must be a product certificate and a product performance test report. The load-bearing structure must be sampled for retest. It is required that the brick must have a strip surface and a straight edge. 2. Cement: the type and strength grade shall be selected according to the position of masonry and the environmental conditions. Cement must be provided with product certificate, factory test report and mobilization re inspection report. 3. Sand: use medium sand and sieve with 5mm aperture before use. 4. Admixture: lime curing time shall not be less than 7d, or fly ash shall be used. 5. Other materials: wall tie bars, embedded parts, wood bricks with anti-corrosion treatment, etc

Topic: Masonry safety technical disclosure Technical disclosure of external wall masonry Technical disclosure of building masonry 6
Quality and technical disclosure of brick masonry subdivisional works
When materials are temporarily stacked at the operation site, they should be placed on a flat and solid ground, and should not be placed in a place with slippery water or soft and cracked soil. When placed on the floor slab or bridge way, it shall not exceed its design load capacity, and shall be stacked in a decentralized manner without excessive concentration. No stacking is allowed within 1m around the foundation pit.

Topic: Sub item safety technical disclosure Technical disclosure of concrete items Technical disclosure of concrete items
Masonry foundation implementation Engineering technology disclose
The damp proof course of brick foundation shall be set according to the design requirements. Buildings in seismic fortification areas shall not use linoleum as the horizontal damp proof course of foundation walls. If there is no specific requirement in the design, 1:2.5 cement mortar with appropriate waterproof agent should be used for laying, and the thickness should be 20mm.

Topic: Technical disclosure of building masonry Technical disclosure of masonry structure drainage Technical disclosure of foundation waterproof
Main body and supporting masonry Engineering technology disclose
The first layer shall be placed for trial masonry. The counting poles shall be erected at the corner and junction of the brick wall, and the alignment line shall be drawn between the counting poles, and the bricks shall be laid one by one according to the alignment line.

Topic: Technical disclosure of plastering body of main external wall Main safety technical disclosure Technical disclosure of main concrete
Main structure masonry Engineering technology disclose
Hanging line must be carried out during masonry. For long wall, a fulcrum can be set in the middle. The small line must be tightened. Each layer of brick must be threaded and leveled

Topic: Technical disclosure of plastering body of main external wall Technical disclosure of concrete main structure Technical disclosure of main structure of construction project
Masonry sub item Engineering technology disclose
Construction preparation, construction process, quality requirements, safety and environmental protection measures, finished product protection

Topic: Classification of safety technical disclosure Divisional and subdivisional works of safety technical disclosure Masonry safety technical disclosure
Masonry of a business park Engineering technology disclose
Treatment of node part 1) Internal corner treatment The internal corner must be brushed with a brush, first make a 20mm R corner (chamfer) with mortar, and then use polypropylene coiled material as the reinforcement layer. 2) The waterproof construction of reserved holes and wall pipes adopts the reinforcement layer method of internal corners to completely seal the gap between the holes, wall pipes and the wall base surface to form a complete waterproof system.

Topic: Technical disclosure of plastering body of main external wall Project cost entrepreneurship Technical disclosure of roof works
Masonry sub item Engineering technology Contents of disclosure
Mandatory provision 1. The strength grade of brick and mortar must meet the design requirements. 2. The corner and junction of brick masonry shall be built at the same time. It is strictly prohibited to build internal and external walls separately without reliable measures. The temporary break that cannot be built at the same time but must be reserved shall be built in a diagonal way, and the horizontal projection length of the diagonal way shall not be less than 2/3 of the height. 3. The age of small blocks used in construction shall not be less than 28 days. 4. It is forbidden to use small broken blocks for load-bearing walls. 5. Small blocks shall be laid upside down on the wall.

Topic: Contents of technical disclosure of roof subdivisional works Sub item safety technical disclosure Technical disclosure of concrete items
Safety technical disclosure of brick masonry of a residential building
This document is the safety technical disclosure of brick masonry of a residential building. The contents are complete and can be downloaded

Topic: What technical safety disclosure Technical safety disclosure record Supervision technical safety disclosure
Technical disclosure of brick masonry part of a club
The deviation of indoor space size: the negative deviation of the clear height shall not exceed 20mm, the range (the difference between the maximum and minimum values in the measured values) shall not exceed 20mm, and the range (the difference between the maximum and minimum values in the measured values) of the net bay and the net depth shall not exceed 20mm. The measured ground levelness shall not exceed 10mm when the bay (depth) is within 5m

Topic: Technical disclosure of building masonry Technical disclosure of pouring and masonry safety Technical disclosure of masonry structure drainage
Construction technical disclosure - general brick masonry engineering.doc

Topic: Masonry safety technical disclosure Technical disclosure of external wall masonry Technical disclosure of building masonry 6
Technical disclosure of brick masonry construction
Before transporting stones, check whether the handling tools and ropes are secure. The stones should be held firmly. When transporting with a car or basket, it should not be too full to prevent falling and injuring people. When transporting stone materials with handcart, the center of gravity of the cart shall be grasped. When loading, the cart shall be loaded at the rear and unloaded at the front. Overloading is not allowed.

Topic: Construction technical disclosure type Overview of construction technical disclosure project Safety technical disclosure
Method and technical disclosure of brick masonry works for brick concrete structure buildings
The upper and lower joints of masonry are staggered, and brick columns and buttresses are not built with a core; There is no through joint on the wall between windows and the clean water wall; There is no through joint of 4 bricks in each room (position) of the mixing wall (through joint refers to the overlapping length of upper and lower bricks is less than 25mm)

Topic: Brick concrete structure house Technical disclosure of brick concrete structure Technical disclosure of brick concrete structure construction
Quality and technical disclosure data of brick masonry subdivisional works
M5 cement lime mixed mortar is used as masonry mortar in this project. External wall: 180 thick lime sand brick; Interior wall: 120 thick lime sand bricks are laid in the toilet and other parts.

Topic: Sub item safety technical disclosure Technical disclosure of concrete items Technical disclosure of concrete items
Safety technical disclosure of brick masonry project of a commercial and residential building
The general requirements for concreting and vibration are: (1) concreting shall be carried out in sections and layers, and the pouring height of each layer shall be determined according to the structural characteristics and reinforcement density, generally 1.25 times the action radius of the vibrator, and the maximum shall not exceed 50cm; (2) The immersion vibrator shall be used to vibrate quickly and slowly. The insertion points shall be evenly arranged, moved point by point, and vibrated in sequence. No omission is allowed. The moving distance shall not be more than 1.5 times of the action radius of the vibrating rod, generally 30~40cm. When vibrating the upper layer, the lower layer shall be inserted for 50mm to eliminate the joint between the two layers; The moving distance of the plate vibrator shall ensure that the plate of the vibrator covers the edge of the vibrated part; (3) The pouring shall be carried out continuously. If there is an interval, the joint shall be made before the initial setting of concrete, generally not more than 2h. Otherwise, the construction shall be reserved according to the specification requirements.

Topic: Safety technical disclosure of brick masonry works Technical disclosure of building brick masonry Brick masonry reinforcement
Technical disclosure of brick masonry project quality of a residential building
The cement used for construction shall be sent for test and used after meeting the strength requirements. Test the sand and gravel entering the site; At the same time, mechanical property test shall be carried out for various reinforcement used, which shall meet the requirements. The welded joints shall also be tested in time and meet the requirements.

Topic: Safety quality technical disclosure Technical quality disclosure of concrete Technical disclosure of construction quality
Infilled wall masonry Engineering technology Safety construction of disclosure
Standard for structural column in masonry: the structural column is poured with C20 concrete, and the position and reinforcement structure are shown in the figure. The structural column must be embedded in the floor slab from top to bottom, and shall not be directly inserted into or embedded in the water retaining platform. Structural column reinforcement: main reinforcement 4 12, stirrup Ф 6 @ 200; The overlapping length of main reinforcement in the structural column is 35d, that is, the overlapping length is 42cm; Stirrups in the reinforcement overlapping area must be densified with a spacing of 100. See the disclosure summary of structural column for the forming standard of structural column.

Topic: Safety construction disclosure Safety technical disclosure of infilled wall construction Capping beam construction disclosure
Masonry above ± 0.00 Engineering technology disclose
Brick: the variety and strength grade must meet the design requirements and be provided with factory certificate or test sheet. The bricks of the clean water wall shall have uniform color and neat corners.

Topic: Technical disclosure of plastering body of main external wall Technical disclosure of roof works Technical disclosure of roof engineering practices
Combined building masonry Engineering technology disclose
Masonry work is an important part of the main works, with a large amount of work, and building maintenance materials of red machine bricks and aerated concrete blocks of different specifications are used; The masonry height of the first and second floors of the combined building is large, and the masonry span of the whole masonry project is also large, which increases the difficulty of actual operation; In addition, scaffold holes should not be left on the masonry. Therefore, during masonry construction, scientific and reasonable masonry methods should be developed according to the actual situation, personnel should be reasonably organized to carry out operations, and safety disclosure should be done to ensure the smooth construction of masonry works.

Topic: Technical disclosure of building masonry engineering Technical disclosure of heating engineering Technical disclosure of ceiling works
Masonry of a commercial square Engineering technology disclose
When starting up, wet the pipes with water first, and put the water into a special ash basin for cleaning the pipes removed during operation. Then lubricate the pipes with mortar, and put the mortar delivered to the floor into a special ash basin. The mortar shall be spread evenly by hand with a shovel within the length before pouring, and shall not be piled together to avoid affecting the strength of components.

Topic: Fire protection design of commercial entity Technical disclosure of concrete square Technical disclosure of square construction
Masonry of a infilled wall Engineering technology Disclosure record
Contents of disclosure: a. Sampling shall not be less than once for every 100 batches of concrete with the same mix proportion and no more than 100m3; b、 When the concrete of the same mix proportion mixed by each work shift is insufficient, the sampling shall not be less than one production; c、 When one continuous pouring exceeds 1000m3, the concrete with the same mix proportion shall be sampled less than once every 200m3; d、 The concrete of each floor and the same mix proportion shall be sampled at least once; e、 At least one group of standard curing specimens shall be retained for each sampling, and the number of retention groups of curing specimens under the same conditions shall be determined according to actual needs.

Topic: Construction technical disclosure record Safety technical disclosure recorder Safety technical disclosure record of subdivisional works
Masonry sub item Engineering technology Attachment of disclosure content
The strength grade of small blocks and mortar must meet the design requirements. The corner of the wall and the junction of the vertical and horizontal walls shall be built at the same time. The temporary gap shall be laid in an oblique way. The horizontal projection length of the oblique way shall not be less than 2/3 of the height. The type, specification and quantity of reinforced masonry reinforcement shall meet the design requirements

Topic: Contents of technical disclosure of roof subdivisional works Sub item safety technical disclosure Technical disclosure of concrete items
Technical disclosure of construction quality of general brick masonry works
The height pole shall be erected according to the design elevation, and the spacing between height poles shall be 15-20m.

Topic: Safety technical disclosure of foundation masonry works Technical disclosure of building masonry engineering Technical disclosure of building masonry workers
Safe construction methods and technical disclosure of general brick masonry works
Cement: the type and strength grade shall be selected according to the position of masonry and the environmental conditions. Cement must be provided with product certificate, factory test report and mobilization re inspection report

Topic: Safety technical disclosure of foundation masonry works Technical disclosure of building masonry engineering Technical disclosure of building masonry workers
Brick masonry construction technical disclosure record of subdivisional works 1
Brick masonry construction technical disclosure record of subdivisional works 1 Brick masonry construction technical disclosure record of subdivisional works 1

Topic: Construction technical disclosure of subdivisional works Safety technical disclosure record of subdivisional works Masonry construction technology
Construction technical disclosure of brick masonry subdivisional works of a school toilet
Operation conditions: the site roads are unobstructed, the sundries in the formwork and the oil stains on the reinforcement are cleaned up, the easily polluted parts of the reinforcement are protected, the formwork is pre inspected, the concealed acceptance of the reinforcement is completed, and the procedures are handled; The pump pipe support shall be set up for the pump pipe laying route, which shall be 20cm higher than the reinforcement surface of the bottom plate, and the concrete pouring pump pipe shall be laid in place; The concrete pouring application form and countersignature procedures of all disciplines before construction are complete, and approved by the technical director and the supervision unit. The 50cm elevation control point of concrete pouring is measured to meet the construction requirements; The concrete pouring base course and formwork shall be watered in advance, and the water collection shall be blown away with compressed air; Technical disclosure shall be made to the construction personnel and the responsibility shall be assigned to each person.

Topic: Construction technical disclosure of subdivisional works Masonry construction technology Technical disclosure of brick foundation construction
Technical disclosure of general brick masonry process
This process standard is applicable to brick concrete, external brick internal formwork and brick wall masonry works with seismic structural columns in general industrial and civil buildings.

Topic: Technical disclosure of building masonry workers Safety technical disclosure of foundation masonry works Masonry technology of rubble foundation
Quality and technical disclosure card of general brick masonry subdivisional works
This data is the quality and technical disclosure card of general brick masonry subdivisional works, which is detailed and can be downloaded for reference.

Topic: Masonry safety technical disclosure Technical disclosure of external wall masonry Technical disclosure of building masonry 6
Quality and technical disclosure card of brick masonry subdivisional works
Before the arrival of typhoon, the built gable shall be temporarily placed between the gable walls with connecting rods (such as purlins), and the connection shall be stable. Otherwise, support measures shall be taken separately. When the bricklaying is more than one floor or the height is more than 4m, if there is no scaffold bridge outside the building, the safety net or guardrail shall be supported.

Topic: Masonry safety technical disclosure Technical disclosure of external wall masonry Technical disclosure of building masonry 6
Building construction masonry sub item Engineering technology Disclosure. doc

Topic: Overview of construction technical disclosure project Safety technical disclosure Safety and technical disclosure of building construction
Masonry for reconstruction of villages in cities Engineering technology disclose
In the construction of masonry structure, the control measures for the position, elevation and perpendicularity of masonry axis are very important.

Topic: Urban Village Project Contract Urban Village Reconstruction Project Contract Urban Village Project Reconstruction Contract
Masonry of a rural plot Engineering technology Disclosure. doc

Topic: Technical disclosure of plastering body of main external wall Technical disclosure of roof works Xindukou Plot
Masonry of medical technology complex building of a hospital Engineering technology disclose
Marking position: 1. Plate reinforcement: plate or wall reinforcement, which shall be marked on the formwork or reinforcement. 2. Column reinforcement: the stirrup of the column shall be marked on the main reinforcement of the two diagonals. 3. Beam reinforcement: the stirrup of the beam shall be marked on the longitudinal reinforcement. 4. Foundation reinforcement: the foundation reinforcement shall be marked with a reinforcement in both directions or on the cushion layer.

Topic: Comprehensive technical disclosure of construction engineering General Hospital Specification Technical code for general hospital building
General brick masonry construction disclosure record
The disclosure record of general brick masonry construction. doc is detailed and rich, which can be downloaded by netizens.

Topic: Capping beam construction disclosure Safety construction disclosure Rebar construction disclosure
Brickwork of Country Garden Tianlu Bay Project Engineering technology disclose
The aerated concrete blocks shall meet the specifications, and the aerated blocks shall pass the inspection after mobilization, and the quality certificate and other data shall be complete. The aerated blocks of different batches shall be stacked separately and neatly, with a height of no more than 2.0m and detailed records. It is strictly prohibited to expose to the sun or rain to prevent damage. The time from the delivery of autoclaved aerated concrete blocks to the mobilization should not be less than 14 days, the stacking time after mobilization should not be less than 14 days, and the product age should exceed 28 days.

Topic: Construction Contract of Country Garden Tianlu Mansion Technical disclosure of Country Garden concrete Project visa Country Garden
Aerated concrete block filling wall masonry Engineering technology disclose
The cement used for masonry mortar should be general Portland cement or masonry cement, and should comply with the current national standards General Portland Cement GB 175 and Masonry Cement GB/T 3183. The cement strength grade shall be selected according to the requirements of mortar type and strength grade, and the masonry mortar with strength grade of Ml5 and below shall be 32 Class general purpose Portland cement or masonry cement; Masonry mortar with strength grade above M15 should use 42.5 ordinary Portland cement.

Topic: Technical disclosure of aerated concrete block infilled wall Aerated concrete block Technical disclosure of foam concrete block
Basement masonry of a residential area Engineering technology disclose
1. The process flow of the wall with concrete structural column shall be in accordance with the construction sequence of steel bar binding, wall masonry, formwork erection, and structural column concrete pouring.

Topic: Technical disclosure of plastering body of main external wall Technical disclosure of roof works Technical disclosure of roof engineering practices
Masonry of Bid Section B of Zhengcun Coal Mine Engineering technology disclose
Masonry work is an important part of the main works, with a large amount of work, and building maintenance materials of red machine bricks and aerated concrete blocks of different specifications are used; The masonry height of the first and second floors of the combined building is large, and the masonry span of the whole masonry project is also large, which increases the difficulty of actual operation; In addition, scaffold holes should not be left on the masonry. Therefore, during masonry construction, scientific and reasonable masonry methods should be developed according to the actual situation, personnel should be reasonably organized to carry out operations, and safety disclosure should be done to ensure the smooth construction of masonry works.

Topic: Project Lot Contract Technical disclosure of plastering body of main external wall Technical disclosure of roof works
Masonry of an international hotel in a trade city Engineering technology disclose
Plaster the bottom when the wall is wet. Generally, the bottom mortar can be plastered after about 2h of full screeding, that is, neither too early nor too late. When plastering, a thin layer shall be plastered first, and no missing plastering is allowed. The mortar shall be squeezed into the small gap by force. Then, the mortar shall be installed, filed, compacted and trowelled layer by layer until it is level with the standard reinforcement. Then, the large wooden bar or ruler plate shall be used to scrape vertically and horizontally, and the wood trowel shall be used to roughen. Then carry out a comprehensive quality inspection to check whether the bottom ash is flat, whether the internal and external corners are square and tidy, whether the junction between the pipe rear and the internal corner, and the junction between the wall top plate are smooth and flat, and use a 2m long ruler board to check the vertical and flat condition of the wall surface. The internal corners of the wall are pulled up and down with the internal corner puller. The floor skirting board, cement wainscot and the back of pipes shall be cleaned in time.

Topic: Fire protection design of the Trade City Construction Scheme of Trade City Technical disclosure of plastering body of main external wall
Main masonry of a staff residential building Engineering technology disclose
During the construction of cushion cap concrete, attention shall be paid not to retain construction cold joints. In order to achieve continuous concrete pouring, no construction cold joints shall be generated, and 2 concrete conveyors shall be provided for concrete construction

Topic: Technical disclosure of plastering body of main external wall Main safety technical disclosure Technical disclosure of main building