Engineering database \ Construction method of a bored pile

Construction method of a bored pile

Uploaded on: December 21, 2019 12:58:56

zero

4 points

This data is about the construction method of a bored pile, including the preparation basis, project overview, main construction technical scheme, etc., with accurate design and detailed content, which can be downloaded for reference by netizens.

Construction method of a bored pile - Figure 1

Construction method of a bored pile - Figure 2

Construction method of a bored pile - Figure 3

Construction method of a bored pile - Figure 4

Construction method of a bored pile - Figure 5

Click to download the source file now

Special statement: This material belongs to the sharing uploaded by users Downloaded content, only for learning, not for commercial use. If there is any copyright problem, please timely contact Station delete!

Collection

WeChat code scanning and sharing

Click to share

Related recommendations

FLAC3D based Cast-in-place pile Post grouting construction method
Using FLAC3D to establish the difference element model of post grouting pile for numerical simulation, and obtain the Q-S curve of post grouting pile under the corresponding engineering geological conditions. By comparing the calculation results with the actual static load test results, the accuracy of using the difference element software to simulate the post grouting cast-in-place pile was verified, which laid the foundation for the later numerical simulation parameter adjustment test

Topic: Application of grouting method in shield construction Construction scheme for grouting reinforcement of pile foundation Summary of grouting construction
Reverse circulation drilling Cast-in-place pile Construction of
This document is about the construction of reverse circulation bored pile, including the compilation basis, project overview, main construction technical scheme, etc. It is detailed and can be downloaded for reference by netizens.

Topic: Construction Scheme of Bridge Reverse Circulation Bored Pile Drilling construction contract Drilling construction technology
Drilling of a plant Cast-in-place pile Construction design
Technical quality requirements for design and construction, engineering geological and hydrogeological conditions, allocation and overall deployment of labor and technicians

Topic: Fire fighting system design of a factory Drilling construction contract Drilling construction technology
drill hole Cast-in-place pile Construction organization design of
The starting and ending points of the eleventh contract section of XX Expressway are from K89+550 to K91+880, with a length of 2.25km. In addition to 1 medium bridge, 11 culverts and 1 channel, Yancheng Interchange is mainly arranged in this section; The main line bridge (666m long), Gangzhong River Bridge (157.4m long), A ramp bridge (271.32m long), E ramp bridge (321.32m long), 8 culverts and 4 channels are arranged within the scope of Yancheng Interchange.

Topic: Construction organization scheme of bored cast-in-place pile Construction organization design Construction and organization design
A long spiral drill Cast-in-place pile Construction technology and method (multiple drawings)
Introduction: It is a new pile foundation construction method developed on the basis of CIP pile foundation in Japan. The long auger drill is drilled to a predetermined depth, and the superfluid concrete is continuously pumped into the hole through the drill bit valve until the pile top is reached, and then the pile is formed by inserting the reinforcement cage. Long spiral drilling, pumping of superfluid concrete, and rear reinforcement cage. It is one of the ten technologies promoted by the Ministry of Construction in 2005.
Ultra deep slurry wall protection Cast-in-place pile Construction method of
This data is the construction method of ultra deep slurry retaining wall cast-in-place pile, including the basis for preparation, project overview, main construction technical scheme, etc., which is detailed and can be downloaded for reference by netizens.

Topic: Slurry wall protection construction method Safety technical disclosure of slurry wall protection Foundation pit support slurry retaining pile
Punching in karst stratum Cast-in-place pile Construction method
This information is about the construction method of punched cast-in-place pile in karst stratum, including the basis for preparation, project overview, main construction technical scheme, etc. The design is accurate and the content is detailed, which can be downloaded for reference by netizens.

Topic: Construction method of punched cast-in-place pile New construction method of screw cast-in-place pile Technical disclosure of punched cast-in-place pile construction
An ultra deep mud retaining wall Cast-in-place pile Construction method
This data is the construction method of ultra deep slurry retaining wall cast-in-place pile, including the preparation basis, project overview, main construction technical scheme, etc. The design is accurate and the content is detailed, which can be downloaded for reference by netizens.

Topic: Masonry construction method Construction Contract for Retaining Pile Slurry wall protection construction method
Ultra long drilling (punching) hole Cast-in-place pile Construction method
This document is the construction method of super long bored (punched) cast-in-place pile, including the preparation basis, project overview, main construction technical scheme, etc., with accurate design and detailed content, which can be downloaded for reference by netizens.

Topic: Construction method of super large volume prestressed concrete structure Specification for super long structures Cover plate construction method
An ultra deep mud retaining wall Cast-in-place pile Construction method of
This data is the construction method of ultra deep slurry retaining wall cast-in-place pile, including the basis for preparation, project overview, main construction technical scheme, etc., which is detailed and can be downloaded for reference by netizens.

Topic: Masonry construction method Construction Contract for Retaining Pile Slurry wall protection construction method
cantilever Cast-in-place pile Construction method of tower crane foundation
Construction method characteristics, scope of application, construction process flow and operation points

Topic: Tower crane foundation Process of cantilever construction method Concept of cantilever construction method
Drilling hole with rotary drilling rig Cast-in-place pile Construction method
Preparation of main application standards and specifications, construction preparation, equipment preparation

Topic: Construction method of rotary drilling rig Summary of rotary excavator drilling construction Drilling rig construction plan in rainy season
A cantilever Cast-in-place pile Construction method of tower crane foundation
This data is the construction method of cantilever cast-in-place pile tower crane foundation, 23 pages in total. The conventional construction technology is adopted for the tower crane foundation of the cantilever bearing platform of the cast-in-place concrete pile, which makes the construction difficult, easy to ensure the quality, and simple and fast. The tower crane foundation construction is located on the ground, which greatly reduces the construction difficulty, makes the construction quality easy to control, and avoids the potential safety hazards in the construction of deeper tower crane foundation. The layout of the crane foundation can be selected in a wide range, which is convenient for the installation of tower crane attachment bars in the construction of the main building.

Topic: Tower crane foundation Process of cantilever construction method Concept of cantilever construction method
Long spiral drilling for pile foundation works Cast-in-place pile Construction method
This data is the construction method of long spiral bored cast-in-place pile for pile foundation engineering, including the preparation basis, project overview, main construction technical scheme, etc. The design is accurate and the content is detailed, which can be downloaded for reference by netizens.
drill hole Cast-in-place pile Word version of construction technology and method (18 pages in total)
According to the construction design drawings and technical disclosure, use the plane control network to measure the setting out and positioning of the pile position, and recheck to ensure that the pile position is correct. The plane position shall be set with cross control points, and the cross method shall be used for positioning, that is, the setting out pile protection inspection method shall be used for control. The deviation of pile position shall be less than 50 mm.

Topic: Construction method of bored pile Construction technology of foundation drilling Construction method summary
Drilling of a project Cast-in-place pile Construction organization design
S/N Item Name Item Description Unit Work Quantity 1 Concrete cast-in-place pile 1. Engineering pile: Bored cast-in-place pile 2. Soil grade: Pile end bearing bearing stratum is 4-1 silty sand clay layer 3. Single pile length: 23m (pile top - 5.000) 4. Pile section: φ 750mm 5. Concrete strength grade: C35 pieces of pumped commercial concrete 2. Concrete cast-in-place pile 1. Engineering pile: Bored cast-in-place pile 2 Soil grade: the pile end bearing stratum is 4-1 silty sand with clay layer; 3. Single pile length: 23m (pile top - 6.700); 4. Pile section: φ 750mm; 5. Concrete strength grade: C35 pieces of pumped commercial concrete; 3. Concrete cast-in-place piles; 1. Test piles: bored piles; 2. Soil grade: the pile end bearing stratum is 4-1 silty sand with clay layer; 3. Single pile length: 23m (pile top - 5.000); 4. Pile section: φ 750mm; 5 Concrete strength grade: C35 pieces of pumped commercial concrete 4 pieces of cast-in-place concrete piles 1. Test pile: bored pile 2. Soil grade: 4-1 silty sand clay layer for pile end bearing endurance layer 3. Single pile length: 23m (pile top - 6.700) 4. Pile section: φ 750mm 5. Concrete strength grade: C35 pieces of pumped commercial concrete 5 steel cage engineering piles, steel bar type Specification: t 163.252 6 reinforcement cage engineering pile within φ 12, reinforcement type and specification: t 807.112 7 reinforcement cage test pile within φ 25, reinforcement type and specification: t 2.982 8 reinforcement cage test pile within φ 12, reinforcement type and specification: t 19.389 within φ 25

Topic: Construction organization design of the project Construction organization scheme of bored cast-in-place pile Engineering investigation drilling
drill hole Cast-in-place pile Construction method and process
The purpose of foundation piling is to increase the bearing capacity of the foundation. As the bearing capacity of the natural foundation soil layer in the area where the building is located is insufficient, column foundation shall be set. The upper load is transferred to the pier and abutment, then to the cushion cap, and then to the pile. The load is evenly distributed to the ground by the bearing layer at the pile end and the friction force of the soil between the piles. Cast in place pile refers to the pile made by forming a pile hole in the foundation soil through mechanical drilling, steel pipe squeezing or manual excavation at the project site, and placing reinforcement cage and pouring concrete in it. According to the different hole forming methods, cast-in-place piles can be divided into pipe sinking cast-in-place piles, bored cast-in-place piles and dug cast-in-place piles. Bored cast-in-place pile is a pile type defined according to the classification of pile forming methods.

Topic: Construction technology and method of bored pile foundation Construction technology and method Rust removal process
drill hole Cast-in-place pile Detailed construction drawing of node structure
This data is the detailed construction drawing of the node structure of the bored pile. The drawing design is accurate and can be used for reference. The engineering pile foundation adopts 600 reinforced concrete bored pile (hereinafter referred to as cast-in-place pile). The effective length of the pile is 19m.

Topic: Detail drawing of bored pile structure Bored cast-in-place pile Bored cast-in-place pile construction
[Drilling of a project Cast-in-place pile Construction organization design
The construction section is mainly divided according to the construction task and pile type. According to the pile type of the construction project, the construction section is divided into bored pile construction section and earthwork construction section. See the general construction plan for the specific division scope.

Topic: Construction organization design of the project Construction organization scheme of bored cast-in-place pile Engineering investigation drilling
Rotary drilling Cast-in-place pile Construction organization design
The total construction area of the project is 42 square meters, which is a livelihood project for government demolition and resettlement. The pile foundation of the main building pile foundation works adopts bored piles, with a pile diameter of 900mm/800mm, the pile end bearing layer of ⑥ moderately weathered silty mudstone/⑤ gravelly medium coarse sand, the rock socketed depth ≥ 5D/2D, the pile body concrete grade of C40 underwater, the characteristic value of the vertical compressive bearing capacity of a single pile: 4500KN/2400KN, and the vertical compressive bearing capacity limit of a single pile: 9000KN/4800KN

Topic: Special construction scheme for rotary drilling Construction organization design of rotary pile foundation Construction technology of rotary drilling cast-in-place pile
Drilling of a tunnel foundation pit Cast-in-place pile Enclosure construction
Brief introduction of a tunnel project, with a total length of 460m (K0+100 ～ K0+560), is an open section and a buried section (where the buried section is K0+280 ～ K0+400). Seizure bored cast-in-place piles with a diameter of 800mm are used for tunnel foundation pit enclosure. 2、 Operation process ① Survey and recheck of axis and pile position Set out and determine the pile position according to the construction drawing and relevant survey data, and survey and recheck the axis and pile position together with relevant personnel. The pile casing can be buried only after the axis and pile position are confirmed to be correct through recheck, and the underground pipeline is detected and treated. ② The pile casing shall be fabricated and embedded with 8mm thick steel plate, and its inner diameter is 200mm larger than the diameter of the drill bit. The top of the pile casing is 0.15~0.3m higher than the ground. When burying the pile casing, the space between the pile casing and the pit wall shall be filled with clay. The center of the pile casing shall coincide with the center of the pile position, and the deviation shall not be greater than 50mm. The pile casing shall be buried at a depth of 1.5m, and the slurry surface in the hole shall be kept 1.0m above the ground water level. ③ Mud production and its performance requirements A The mud used in opening shall be made of high-quality clay, and the mud proportion shall be controlled within 1.2~1.3; When drilling to the clay layer, clean water shall be injected, and the original soil shall be used to make slurry for wall protection. The proportion of slurry shall be controlled within 1.1~1.3. B Mud control index: viscosity 18~22s; The sand content is not more than 8%; Colloid rate shall not be less than 90%. C During construction, the specific gravity, viscosity, sand content and colloid ratio of slurry shall be measured frequently. In order to make the mud have better technical performance, appropriate additives can be put into the mud when necessary.

Topic: Foundation pit retaining form Foundation pit retaining structure Foundation pit support and foundation pit support
Detailed drilling Cast-in-place pile Construction organization scheme
The design form of 1 # building in Block B of the project is bored pile foundation, with 92 piles, 21 〜 24.5m long, three pile diameters of Φ 1200mm, Φ 1300mm and Φ 1400mm, and most of them are bottom expanded; There are 4 Φ 1200 straight holes, Φ 1200 (20 expanded 1600, 15 expanded 1800, 15 expanded 2200), 18 piles with a diameter of Φ 1300mm (3 expanded 2200, 4 expanded 2000, 7 expanded 1600, 4 not expanded), 20 Φ 1400 (expanded 1800); 6 Φ 1400 (2 expanded 2000, 4 expanded 1800). The concrete strength is C25, and the design value of single pile bearing capacity is 1500KN 〜 4600KN. See the design drawing for reinforcement layout

Topic: Construction organization scheme of bored cast-in-place pile Bored cast-in-place pile and foundation construction Winter construction of bored cast-in-place pile
drill hole Cast-in-place pile Practical construction design
On the circular curve, the cross slope of the bridge deck is one-way - 3%, the vertical section is located on the vertical curve of R=21992.1m, and the piers and abutments are arranged at equal angles. The starting stake is K23+970.5 (0 # abutment), the ending stake is K24+175.5 (10 # abutment), the center stake is K24+073, and the bridge is 205m long. The whole bridge has two connections: 5 * 20+5 * 20; Superstructure

Topic: Summary of bored pile construction Construction method of bored pile Bored Pile Construction Contract
Drilling of a project Cast-in-place pile construction plan
Construction scheme of bored cast-in-place pile of a project Construction scheme of bored cast-in-place pile of a project Construction scheme of bored cast-in-place pile of a project

Topic: Construction Scheme of Bored Pile Works Contract for Bored Pile Works Bored cast-in-place pile and foundation construction
Borehole in a city Cast-in-place pile construction technology
When the reinforcement cage is processed, the reinforcement stirrups on the inner side of the reinforcement cage are every 2m, and on the outer side every 4m. The distance from the bottom reinforcing stirrup to the bottom of the reinforcement cage is 40cm. The cushion blocks shall be set every 2m, and each group shall be bound with 4 pieces.

Topic: Construction technology of foundation drilling As shown in the figure, flood control in a city Sewage treatment in a city
drill hole Cast-in-place pile Post grouting construction process
Bored cast-in-place pile is a widely used foundation structure at present, and cast-in-place pile foundation has increasingly become a common form of deep foundation for industrial buildings, high-rise buildings, bridges, docks, heavy storage silos and other projects on soft soil foundation. With the rapid development of modern construction technology, the requirements for the bearing capacity and deformation resistance of pile foundation are becoming higher and higher. The traditional bored cast-in-place pile is difficult to completely solve the problem of mud skin and sediment around the pile, and its advantages cannot be fully developed. The "post grouting technology" of bored pile can save the cost of pile foundation to a greater extent, shorten the construction period, effectively enhance the quality stability and improve the bearing capacity of single pile. Since the post grouting of bored piles can greatly improve the bearing capacity of single piles, the investment can be saved by reducing the pile layout and the pile length or diameter in design. According to the actual situation of the project, under the condition of not increasing the pile length and pile diameter, the post grouting is not only technically reliable, but also has far-reaching significance in improving the bearing capacity of a single pile, reducing project settlement, reducing the cost of pile foundation engineering, etc. Combined with the construction of post grouting bored piles for the taxiway bridge project in the north area of Beijing Airport Reconstruction and Extension Project, this paper focuses on the mechanism, construction technology and process technology quality control of post grouting bored piles, hoping to provide reference for everyone

Topic: Construction technology of bored grouting pile for pile foundation Post grouting bored pile construction equipment Construction technology of foundation drilling
Drilling of a project Cast-in-place pile Construction organization design
The number of piles in this project is large and the distribution area is large. Before measurement, a detailed and scientific measurement plan must be formulated to ensure the measurement quality

Topic: Construction organization scheme of bored cast-in-place pile Construction organization design Construction organization design
drill hole Cast-in-place pile (Rotary drilling rig) construction design
Key points of construction technology and operation, materials and machinery

Topic: Foundation construction of rotary drilling rig Drilling rig construction plan in rainy season Special construction scheme for rotary drill
Anhui Borehole Cast-in-place pile Construction organization scheme
The rivers crossed by this bridge are non navigable rivers. The hydrogeological conditions along the line are excellent, without special geological structures. The selection of bridge location is subject to the overall trend of the route, basically meeting the coordination and integration of roads and bridges.

Topic: Construction organization scheme of bored cast-in-place pile Bored cast-in-place pile and foundation construction Winter construction of bored cast-in-place pile
Drilling of a plant Cast-in-place pile construction plan
Construction preparation, allocation and overall deployment of labor and technical personnel, construction schedule and duration assurance measures

Topic: Construction scheme of municipal bored cast-in-place pile Bored cast-in-place pile and foundation construction Winter construction of bored cast-in-place pile
drill hole Cast-in-place pile Summary of test pile construction
This data is a summary of the construction of bored cast-in-place pile test pile. The reinforcement cage of bored cast-in-place pile in this project is processed on site; Concrete shall be mixed and processed on site. Preparations: the work includes three items: survey and setting out, drilling platform, pile casing fabrication and embedding, and slurry preparation. The content is detailed and worth downloading.

Topic: Summary of bored pile construction Summary of subgrade test section construction Summary of rotary excavator drilling construction
drill hole Cast-in-place pile Borehole construction inspection record
This data is the inspection record of bored cast-in-place pile drilling construction. The contents are complete and can be downloaded

Topic: Flood control inspection record Welding construction inspection record PP worker safety technical disclosure record
drill hole Cast-in-place pile Filling construction inspection record
This document is the inspection record of cast-in-place construction of bored piles. The contents are complete and can be downloaded

Topic: Flood control inspection record Welding construction inspection record PP worker safety technical disclosure record
Ningbo Borehole Cast-in-place pile Control of key construction points
The reconstruction project of Ningbo South Station is located in the existing station yard of Ningbo Station. The mileage range is K146+904 ～ K147+028; The station building has three floors in total, one underground floor and two above ground floors. The station of Metro Line 2 is located below the National Railway Station, which is on the second floor underground and runs south-north in line with the direction of the station. It is an underground transportation supporting project of Ningbo Railway Station and is built together with the National Railway Station.

Topic: Key points for quality control of bored piles Key points of cost control Key points of construction
drill hole Cast-in-place pile Construction record sheet
Construction record form, punch in construction team, better income tax card, double card, double waiting for the deputy secretary of Kazakhstan, more or less sofa, sofa, bisphenol, ASF

Topic: Must there be borehole records for foundation treatment Dimension list of steel pipe fittings Drilling construction contract
drill hole Cast-in-place pile Comprehensive construction organization design
This construction organization design combines the characteristics of the large quantities of the whole project, with reference to the management and construction experience of the relocation pile foundation project of the Provincial Great Hall of the People, the pile foundation project of Hangzhou Grand Theater, the pile foundation project of West Lake Cultural Plaza and the pile foundation project of Hangzhou Commercial Bank organized by our company, focusing on the investment of construction machinery, construction organization management The quality assurance, progress assurance and civilized construction will discuss that our company will complete the whole pile foundation construction with high quality within 120 days.

Topic: Construction organization scheme of bored cast-in-place pile Code for overall fire protection design Construction organization design
drill hole Cast-in-place pile Detailed Rules for Construction Safety Supervision
For impact drilling, the drill cone, winch and steel wire rope shall be properly configured. When the steel wire rope and the drill cone are fixed with rope clamps, the number of rope clamps shall match the diameter of the steel wire rope. During the impact, the slack of the wire rope shall be properly controlled.

Topic: Safety Supervision Rules Detailed rules for construction supervision Does the detailed safety supervision rules include pile foundation
A borehole Cast-in-place pile Construction technical disclosure
The reinforcement cage shall be lofted according to the construction drawings before fabrication, and shall not be fabricated until it is reviewed by the professional engineer.

Topic: Technical disclosure of bridge bored pile construction Technical requirements for bored pile construction Construction technology of rotary drilling cast-in-place pile
Working well drilling Cast-in-place pile Construction plan (1)

Topic: Flood control work plan Construction plan Special construction scheme for working well
Bridge drilling Cast-in-place pile Construction training courseware

Topic: Foundation construction courseware Courseware of rubber dam construction Summary of Bridge Construction Course