-
Construction drawing of 3kw wind turbine triangular support
This design is used for the triangular support for 2-5kw wind turbine roof, and the power hydraulic cylinder push rod is responsible for erecting the main fan riser, which is more practical, simple and reasonable. The support is designed to resist wind force of 12 levels, and the top weight of the fan is less than 250kg.
-
Operation Instruction Manual for Mechanical Installation of Wind Turbine Generator Set
Wind turbine is a high-tech product integrating mechanical, electrical, hydraulic and computer remote control. In order to ensure the safe operation of the generator set and the subsequent on-site mechanical installation of the wind farm, the on-site installation should be carried out in strict accordance with the assembly process. All components should be firmly fixed and correctly installed. Before installation, the mechanical installation drawing of the wind turbine should be correctly understood, Be familiar with the mechanical installation sequence and have sufficient knowledge of fans.
-
Drawing introduction: It is designed by Solidworks and the overall installation model of 15kW wind turbine generator set, including wind turbine and generator; The wind turbine is composed of blades, hubs, reinforcements, etc; It has the functions of generating electricity by rotating the blades under the wind force and rotating the head of the generator. Dear mechanical control model fans, welcome to download
-
-
-
This document is a model of bevel gear driven wind turbine. The annular blades move under the drive of the wind, driving the bevel gear to drive the engine, and a directional positioning device is designed in the middle. The wind turbine is small as a whole, suitable for household power generation. The file contains animation simulation and gif view, which is a good design. The overall version is sw2018, which can be edited, including step general format. Welcome to download
-
This model is the design model of 800W horizontal axis wind turbine scheme, including some drawings and some finite element analysis. The horizontal axis wind turbine scheme is designed according to the rated wind speed and current. See the internal documents for details of the specific model
-
Wind turbine rotor module design model This is a wind turbine rotor module design model diagram. Wind turbine is an electrical equipment that converts wind energy into mechanical power, and mechanical power drives the rotor to rotate, and finally outputs alternating current. Rotor is a technical term. Generally speaking, the rotating body supported by the bearing is called the rotor. For example, an object such as a disc that has no rotating axis of its own can be regarded as a rotor when it is rigidly connected or has an additional axis, (drawn by SW2010, does not contain parameters, but can be edited)
-
The design model of vertical axis wind turbine is an electrical equipment that converts wind energy into mechanical power, and the mechanical power drives the rotor to rotate, and finally outputs AC power. In a broad sense, wind energy is also solar energy, so it can also be said that wind turbine is a kind of thermal energy utilization generator with the sun as the heat source and the atmosphere as the working medium. (SW2010 drawing, not including parameters, but editable model)
-
The design model of wind turbine (accessory) is a device that converts wind energy into electric energy. It is mainly composed of blades, generators, mechanical parts and electrical parts. The principle of wind power generation is to use the wind to drive the windmill blades to rotate, and then increase the speed of rotation through the booster engine to promote the generator to generate electricity. According to the current windmill technology, the wind speed is about three meters per second (the degree of light wind), and power generation can start. (Considering that the drawings can use other different types of 3D software, the 3D format STP or IGS shall prevail. The uploaded model is converted by SW, and the model after SW conversion is only
-
Grid connected inverter converter of wind turbine: it is a kind of power electronic equipment, which is used to convert the AC generated by wind turbine into high-quality AC power and connect it to the power grid. It is usually composed of rectifier, inverter and controller
-
Wind turbines are widely used in China. Most of the wind turbines are distributed in the wild and have large structures. Large wind turbines are up to 60 or 70 meters high. Therefore, climbing free machines are generally set in the generator tower to assist workers to complete various tasks. This design model is a self designed mechanical mechanism model of climbing free machines in the wind turbine tower, It may not be completely reasonable and reliable for some detailed structures, but it has certain value for students to learn and enterprises to make reference
-
Based on the analysis and research of the wind turbine drive system, and according to the current research status at home and abroad, this paper studies the core components of wind turbine. This paper presents a new type of wind turbine gearbox, which is composed of a two-stage planetary gear transmission mechanism and a parallel shaft gear. After determining the transmission scheme, the key components of the accelerator are analyzed, and the dynamics of the whole system is analyzed. The wind turbine designed in this paper has the characteristics of large output power, small size and high reliability, which can provide certain basis for the development of independent intellectual property rights of wind turbine in China
-
\Wind Turbine Design and Operation Maintenance.pdf
-
Design and Research of Small Maglev Wind Turbine
How to solve the energy crisis has become a global focus. Among several renewable energy sources available at present, solar energy and wind energy are widely used. Solar energy and wind energy have good complementary characteristics in terms of resource conditions and technology applications. The wind solar complementary power generation system established by comprehensively considering the complementary characteristics of solar energy and wind energy in many aspects is an economical and reasonable power supply mode. Small vertical axis maglev wind power generation system can meet the demand of independent power supply in areas far away from the power grid. This design combines wind power generation and solar power generation to form a wind solar complementary power generation system. This power generation system has three major parts, namely wind turbine, solar panel and intelligent controller. In this design, the wind turbine and solar panel are simply analyzed and designed. The control system uses PICl6F716 single chip microcomputer as the control MCU. Through the analysis of the performance of the generator and the solar panel, the MPPT control strategy is proposed, and the hardware parts such as the peripheral circuit of the single chip microcomputer, the voltage and current detection circuit, the drive circuit, the inverter circuit and so on are designed in detail; Finally, the whole design is completed by matching with the software design.
-
-
Large offshore permanent magnet wind spin repeater motor: the generator uses permanent magnet as the magnetic field source, which can generate strong magnetic field. At the same time, it uses wind power to drive the rotor to rotate, which has high power generation efficiency and stability. High reliability: the generator uses permanent magnet as the magnetic field source, without the use of excitation circuit, which reduces the fault point and maintenance workload, and improves the reliability and life of the equipment.
-
Horizontal axis wind power generation system small wind turbine: the lower part is equipped with a column for placement, and the upper part is equipped with a motor for driving. The modeling data in the middle format is smaller, which can adapt to more software, and can be modified. Welcome to download and use the
-
The design model of wind turbine generator is an engine that uses fluid to impact the rotation of the impeller to generate power. It can be divided into steam turbine, gas turbine and water turbine. It is widely used as a power machine for power generation, aviation, navigation, etc. The turbocharger is actually an air compressor, which compresses air to increase air intake. It uses inertial impulse to increase the output power of the engine. (SW2010 drawing, not including parameters, but editable model)
-
The design model of wind turbine is an electrical equipment that converts wind energy into mechanical power, and the mechanical power drives the rotor to rotate, and finally outputs AC power. In a broad sense, wind energy is also solar energy, so it can also be said that wind turbine is a kind of thermal energy utilization generator with the sun as the heat source and the atmosphere as the working medium. It is an electrical equipment that converts wind energy into mechanical energy and mechanical energy into electrical energy. In a broad sense, it is a heat energy utilization engine with the sun as the heat source and the atmosphere as the working medium. Wind power uses natural energy. It is much better than diesel power generation. But if it is used for emergency, it is not as good as diesel generator. Wind
-
The design model of the 3-5KW vertical axis wind turbine is a device that converts wind energy into electric energy, which is mainly composed of blades, generators, mechanical parts and electrical parts. According to the different rotating axes, wind turbines are mainly divided into horizontal axis wind turbines and vertical axis wind turbines. At present, horizontal axis wind turbines occupy the mainstream position in the market. (SW2010 drawing, not including parameters, but editable model)
-
The design model of 150 kW wind turbine generator set refers to an electromagnetic device that converts or transfers electric energy according to the law of electromagnetic induction. It is indicated by the letter M (D in the old standard) in the circuit. Its main function is to generate driving torque, as the power source of electrical appliances or various machines. The generator is represented by the letter G in the circuit. Its main function is to convert mechanical energy into electrical energy. At present, the most common is to use thermal energy, water energy, etc. to drive the generator rotor to generate electricity. It does not contain parameters, but can be edited. It can be opened with SOLIDWORKS 2010, and draw good learning materials
-
Gearbox is widely used in wind turbine, which is often used in wind turbine, and is an important mechanical component. Three motor torque distribution gearbox: the output power of the motor is combined and reduced to obtain greater torque. Torque is distributed to two shafts of one cylinder and a simple clutch system. The model has no motor, see the model tree picture for details
-
The 3D printed design model of wind turbine is composed of wind turbine, tower supporting the generator, battery charging controller, inverter, unloader, grid connected controller, battery pack, etc; Wind turbine generator set includes wind turbine and generator; The wind turbine is composed of blades, hubs, reinforcements, etc; It has the functions of generating electricity by rotating the blades under the wind force and rotating the head of the generator. (SW2010 drawing, not including parameters, but editable model)
-
The damping machine room platform of 15KW wind turbine is composed of two upper and lower platens with N spring dampers installed between them. Wind turbine is a device that converts wind energy into electric energy, mainly composed of blades, generators, mechanical parts and electrical parts. According to the different rotating axes, wind turbines are mainly divided into horizontal axis wind turbines and vertical axis wind turbines. At present, horizontal axis wind turbines occupy the mainstream position in the market. STP format is attached
-
Wind turbine is an electrical equipment that converts wind energy into mechanical power, which drives the rotor to rotate and finally outputs AC power. Wind turbine generally consists of wind turbine, generator (including device), direction adjuster (tail wing), tower, speed limiting safety mechanism, energy storage device and other components. The working principle of the wind turbine is relatively simple. The wind wheel rotates under the action of the wind, which converts the kinetic energy of the wind into the mechanical energy of the wind wheel shaft. The generator rotates to generate electricity under the drive of the wind wheel shaft. In a broad sense, wind energy is also solar energy, so it can also be said that wind turbine is a kind of thermal energy utilization generator with the sun as the heat source and the atmosphere as the working medium
-
This drawing is designed and modified according to the patent documents. It is solidworks 2012 version design and gear transmission. The hammer changes the blade attitude under the influence of gravity, which is very suitable for design reference! Welcome to download the reference
-
Detailed drawing of wind turbine foundation node structure
This data is the detailed structural drawing of the foundation node of the wind turbine generator unit. The drawings include: the plan and section of the wind turbine foundation, a total of 1 drawing. The design is accurate and the content is detailed for reference.
-
Research on Frequency Conversion Technology of Wind Turbine
As a green energy, wind energy has attracted more and more attention. With the rapid development of wind power generation technology, variable-speed constant frequency doubly fed machine wind power generation technology has gradually been widely used. This paper first establishes the mathematical model of the grid side converter, and then uses Simulink to carry out simulation research on the grid side converter of doubly fed wind turbine.
-
Installation drawing and civil engineering data of a generator chamber
This drawing is the installation drawing and civil engineering data of a generator chamber; The contents include the installation drawing of generator chamber of 6MW steam turbine generator unit, installation drawing of generator chamber of 15MW steam turbine generator unit, electrical data of generator chamber of 6MW steam turbine generator unit, etc; This drawing is standard in design and detailed in content; For reference!
-
Layout and installation drawing of generator outlet chamber
This data is the layout and installation drawing of generator outlet chamber. The drawing includes: the detailed layout and installation drawing of generator outlet chamber of 6MW+12MW waste incineration power plant. The design is accurate and the content is detailed, which can be downloaded by designers for reference.
-
-
-
Overview of wind turbine assembly enterprises in China
Category I: wind turbine manufacturers with relatively good industrialization implementation and basic mass production capacity, including six companies including Xinjiang Goldwind Technology Co., Ltd., Sinovel Wind Power Technology Co., Ltd., Dongfang Turbine Co., Ltd., Zhejiang Yunda Wind Power Engineering Co., Ltd., Nantong Aerospace Wanyuan Anxunneng Wind Power Equipment Manufacturing Co., Ltd;
-
Wind energy, as a clean and renewable energy, has been paid more and more attention by countries all over the world. Wind turbine generator and tower fixed base, which is mainly used to connect the tower vertically installed in the wind turbine generator equipment and the generator with tilt angle, to connect and fix, and bear a certain force
-
A non-standard design 3D model of vertical axis wind turbine. The fan blades are 9-layer design and arranged alternately. When the wind direction changes, the vertical axis wind turbine does not need to face the wind, which is a major advantage over the horizontal axis wind turbine. It not only simplifies the structural design, but also reduces the gyroscopic force of the wind wheel when facing the wind. Welcome to download
-
The stall hydraulic control system of the wind turbine generator is a control system that protects the wind turbine generator by instantly releasing the pressure in the accumulator when the wind turbine generator is running at a stall, so that the blade stalls to ensure shutdown. This is a very common hydraulic control component
-
(Windmill) The design model of wind turbine is a power machine that converts wind energy into mechanical work, also known as windmill. In a broad sense, it is a heat energy utilization engine with the sun as the heat source and the atmosphere as the working medium. It is a power machine that converts wind energy into mechanical work, also known as windmill. In a broad sense, it is a heat energy utilization engine with the sun as the heat source and the atmosphere as the working medium. Wind power uses natural energy. It is much better than diesel power generation. But if it is used for emergency, it is not as good as diesel generator. Wind power generation can not be regarded as standby power supply, but it can be used for a long time. The principle of wind power generation is
-
This design is a three-dimensional model of the whole 50WS vertical axis wind turbine. With accurate design, the structure design is reasonable and meets the mechanical design specifications. It is suitable for numerical simulation of wind force. Including parameters, which can be edited
-
The wind turbine design model of wooden jigsaw puzzle is an electrical equipment that converts wind energy into mechanical power, and the mechanical power drives the rotor to rotate, and finally outputs AC power. In a broad sense, wind energy is also solar energy, so it can also be said that wind turbine is a kind of thermal energy utilization generator with the sun as the heat source and the atmosphere as the working medium. The principle of wind power generation is to use the wind to drive the windmill blades to rotate, and then increase the speed of rotation through the booster engine to promote the generator to generate electricity. According to the current wind turbine technology, the wind speed is about three meters per second (the degree of light wind), and power generation can start. (Drawn by SW2010
