Construction Organization Design of Shen Dan Expressway

Uploaded on: December 11, 2019 13:01:40 come from: Water supply and drainage / Water supply and drainage construction design / Construction organization design

zero

5 points

The construction quantity of the embankment in this contract section is large, with a total filling volume of 1.36 million cubic meters. Due to the settlement and stability problems of the embankment, especially the possible stability problems of the high embankment, the construction quality is required to be high. Therefore, the requirements for the treatment of the base, the selection of fillers, drainage measures, and the control of compaction standards are relatively high, so as to ensure the stability and durability of the subgrade.

Construction Organization Design of Shen Dan Expressway - Figure 1

Construction Organization Design of Shen Dan Expressway - Figure 2

Construction Organization Design of Shen Dan Expressway - Figure 3

Construction Organization Design of Shen Dan Expressway - Figure 4

Construction Organization Design of Shen Dan Expressway - Figure 5

Click to download the source file now

Special statement: This material belongs to the sharing uploaded by users Downloaded content, only for learning, not for commercial use. If there is any copyright problem, please timely contact Station delete!

Collection

WeChat code scanning and sharing

Click to share

Related recommendations

some expressway Construction organization design documents
The construction organization design document of an expressway: it is a commercial technical bid. The * * to * * expressway is an important part of the Yinchuan Wuhan line of the western inter provincial highway channel, and also an important part of the main skeleton network of the "meter" shaped highway in Shaanxi Province. The project construction plays a very important role in the development of regional economy, the implementation of the Western Development, and the promotion of the comprehensive and coordinated economic development of the eastern and western regions. The route starts from the southeast of * * county seat, and Chenhejia (K137+652.18), about 2km east of G312 line, connects with the Shaanxi Gansu border to * * expressway under construction, and ends at the north of Zhouling Village in * * city (K203+366.45), connecting with Xi'an * * International Airport Expressway, passing * *, Qianxian County, Liquan, Qindu District and Weicheng District, with a total length of 65.435km.

Topic: Construction organization design documents Construction organization design of expressway tunnel High speed construction organization design
expressway Capping beam construction organization design
The fifth contract section of A30 Expressway (Jiehe Outer Ring Road) is the Huchongsu Interchange Project, which is the largest hub project of A30 Project. The pivot is a three story interchange, a main line and four ramps. Continuous box girders are set at the planned artificial river, of which the main line is 632 meters long, the ramp is about 1600 meters long, and there are Ramp A crossing Suitang River Bridge and Zhaojiagou Bridge, Ramp B crossing Suitang River Bridge and the main line crossing Union River Bridge. The substructure of the bridge in this project is in the form of pile foundation, cushion cap, pier column, capping beam, etc. There are 123 capping beams in total: specifications: A type 12.050m × 2.000m; Type B: 11.850m × 2.900m; Type C 12.050m × 2.450m, 16.758m × 2.560m; Type D 12.050m × 2.450m; E type 12.050m × 2.000m and section size variation type, etc. The capping beam is a C50 prestressed concrete structure. See the Statistical List of Capping Beams for specific specifications, heights and quantities.

Topic: Construction Scheme for Capping Beam of Expressway Construction organization design of expressway tunnel High speed construction organization design
Shandong expressway Construction organization design
The xx xx Expressway is an important section of the main skeleton of the highway network of the "Tenth Five Year Plan" development plan and the 2010 development planning goal of "five longitudinal and four horizontal roads, one surrounding xx" of xx Province, and also an important part of the national key trunk highway network layout planned by the Ministry of Communications of the Middle East Camp to Hong Kong (port) highway. The Project is connected to Beijing Shanghai (Beijing Fuzhou) Expressway, xx Ring Expressway in the north and Rizhao Dongming Expressway in the south. Its construction plays an important role in improving the expressway network of xx province, giving full play to the overall function of the road network, and strengthening the construction of the national key trunk road network; Its construction will provide a fast, safe, unimpeded and economic passage between the southwest of Shandong Province and the provincial capital xx and the eastern coastal areas, greatly improve the traffic conditions and investment environment in this area, and effectively promote social and economic development. The xx expressway starts from the north of xx, xx shop town, xx district, xx city, connects with the south section of xx ring expressway, passes through Changqing District, Pingyin County, Dongping County, Tai'an City, Wenshang County, Liangshan County, Jiaxiang County, Jining City, Yuncheng County, Juye County, xx city, and ends at Wangguantun, Juye County, xx city, and connects with it near Rizhao Dongming Expressway K320, with a total length of 153.591 kilometers.

Topic: Construction Scheme of an Expressway in Shandong High speed construction organization design Construction organization design of expressway tunnel
Jingfu expressway Construction organization design
The national trunk line from Beijing to Fuzhou is one of the "five vertical and seven horizontal" national trunk lines planned and implemented by the Ministry of Communications. It starts in Beijing, passes through Tianjin, Hebei, Shandong, Jiangsu, Anhui, Hubei and xx, and ends at Fuzhou Port, Fujian Province. It passes through 9 provinces and cities, with a total length of 2540 kilometers. The northern section (Jiujiang through Nanchang to xx) of the xx national trunk road has been completed and opened to traffic. The project is the southern section, namely the xx to xx section. The route starts from Chenjia, xx Moxi, Jinxian County, passes through 26 towns in four counties, namely Jinxian County, Linchuan District, Nancheng County, Fuzhou City, and Lichuan County, and finally ends at xx Xiongcun, the junction of Jiangxi and Fujian provinces, Lichuan County, with a total length of 178 kilometers.

Topic: High speed construction organization design Construction organization of expressway tunnel Highway construction organization design
expressway Backup of construction organization design
The xx xx section of the expressway is a part of the xx xx expressway in the national expressway network, and also a part of the "five vertical, five horizontal, three ring and four connected" skeleton trunk highway transverse 2 in the planning of the expressway network of xx province. It starts from the xx xx expressway under construction in the east, ends at xx city, the end point of the xx xx expressway, and ends at xx at the border between Jilin and Mongolia in the west. It connects the xx village and xx expressway planned and constructed in Inner Mongolia, and is the "eleventh five-year plan" of xx province Key construction projects.

Topic: Fire protection design backup High speed construction organization design Construction organization design of expressway tunnel
expressway Organization design of Bid A construction
The A4 section of the expressway is located in xx town and xx township of xx county, xx city, in a north-south direction. The starting and ending stake numbers are K9 ＋ 450 ～ K15 ＋ 590. The total length of the route is 6.14km, starting from xx village, passing through xx village, xx village, xx village, xx brick factory, xx village to xx village. This section is provided with one large, medium and small bridge and one separation interchange (upper span), with a total length of 431.2m; 10 channels (including 3 bridge openings), 20 culverts and 1 aqueduct; Subgrade filling 416000 m3, excavation 103000 m3; 30cm lime fly ash soil subbase: 148500m2, 20cm lime fly ash macadam base: 65000m2, 30cm lime fly ash macadam base: 70000m2

Topic: Construction organization design of expressway tunnel Expressway Design and Construction Contract Summary of expressway construction
expressway (North Road) construction organization design
The north section of the expressway is an important part of the trunk line of National Highway 312 (Lianyungang Horgos), and it is the east-west part of the "two longitudinal and two horizontal" trunk line of the national highway that is currently planned to be constructed by the country before 2000. It is also an important section in XX Province. Its construction is of great significance to solve the transit traffic in Xi'an, ease the traffic congestion in xx city, and promote the social and economic development of xx.

Topic: Construction organization design of expressway tunnel Expressway Design and Construction Contract Fire protection design of expressway
some expressway Construction Organization Design 【 Undergraduate 】

[Author] * *; [Tutor] * *; 【 Degree awarding unit 】 Shijiazhuang Railway University; [Discipline Name] Road and Bridge Engineering [Degree Year] 2006 [Thesis Level] Undergraduate This graduation design is based on the construction organization design of the second contract section of the new county section of Henan Province of the national key expressway - Ahrongqi Shenzhen Expressway (Ahrongqi Shenzhen Expressway). The project is located at the north foot of Dabie Mountain, with complex terrain and geological structure. The main works of this bid section are: tunnel works, bridge works, interchange works, subgrade works, pavement works, etc. The key and difficult point of the design lies in the design, optimization and selection of the construction scheme and construction process of the tunnel and bridge.

Topic: Expressway design Expressway construction Construction of expressway
unit of weight for measuring silver expressway Construction organization design
Beijing Pinghua Expressway (Airport South Line Expressway to the city boundary) starts at the intersection of xx of the sixth ring road, crosses xx and xx districts of Beijing, and ends at xx in the southeast of xx district of xx district of Beijing. The boundary between Beijing and Tianjin is connected with the extension line of xx Expressway, with a total length of about 52.83km. This section is the xx section, with the starting and ending stake numbers of K26+280 ～ K30+800 and a length of 4.52km. The line is intersected with Zaolizhuang existing road (7m wide), Xiaosonggezhuang trunk canal, fishpond, local road 1, existing Yunma Road (5.5m wide), local road 2, Mafang Railway (2-strand line), and existing Misan Road (41.3m wide). This section intersects the existing Zaolizhuang local road at the road stake K26+952.3. The existing Zaolizhuang road has a full width of 7m. The existing road on the north side of Beijing Pinghua Expressway is an earth road, and the asphalt road on the south side. During construction, Zaolizhuang access bridge will be built at the intersection with the existing road. The total length of Zaolizhuang access bridge is 18.04m, which is 26m as wide as the subgrade of Beijing Pinghua Expressway; This bid section crosses the existing Xiaosonggezhuang trunk canal at the road chainage K27+115.8. The intersection of the Xiaosonggezhuang trunk canal is irregular and the intersection angle with the main road is small. During the construction, the river channel is renovated and relocated. The top width of the renovated Xiaosonggezhuang trunk canal is 30m, the bottom width of the canal is 10m, and it is a trapezoidal section. A new Xiaosonggezhuang trunk canal bridge with a total length of 52.04m is built at the relocated location, The same width of the bridge and the subgrade of Jingping Expressway is 26m; The road passes through K27+170 ～ K27+570, K27+720 ～ K27+950 and K28+150 ～ K28+660 as fish ponds, which need to be replaced; Local Road 1 is located at the north side of the main road K27+500~27+780 of Beijing Pinghua Expressway. The existing road is an earth road, which is reconstructed into a gravel road with a reconstruction length of 300m; The Jingping Expressway crosses Yunma Road at stake K28+302.3. The existing Yunma Road is 5.5 m wide. During construction, Yunma Road overpass is newly built. The bridge is 66.04 m long and 26 m wide as the subgrade of Jingping Expressway; Local Road 2 is located at the south side of K29+000, the main road of Beijing Pinggu Expressway. It is now a dirt road, and the reconstruction length of the road is 30m; Misan Road Interchange is located at chainage K29+952.86 of Beijing Pinghua Expressway and spans Mafang Railway and the current Misan Road. Misan Road Interchange includes the main line bridge, B, C, D, E ramp bridge, A ramp channel bridge and the reconstruction of local road 1 and 2 within the scope of the interchange. The main line bridge is 992.488m long and the bridge is widened within the scope of the interchange. The main contents of the project construction include: 1 Misan Road Interchange (main line, ramps A, B, C, D, E), Xiaosonggezhuang Trunk Canal Bridge, Yunma Road Separated Flyover, Zaolizhuang Passage Bridge, Jingping Road Project, 5 local roads reconstruction project and drainage project.

Topic: High speed construction organization design Construction organization of expressway tunnel Highway construction organization design
Anhui expressway Construction organization design//
A-B (Huangwei) Expressway is a section of C-D Highway in the national key highway planning. At the same time, it is also an important part of the "West Vertical" (Bozhou Fuyang A Anqing Dongzhi Highway) in the main framework planning of the highway in Anhui Province. It starts from Fuyang A Expressway and ends at B (Huangwei) Qianshan Expressway, with a total length of 72.287km.

Topic: Construction organization design of expressway tunnel Anhui residential building construction organization design Construction organization design of secondary highway
Grade III expressway Construction organization design
The expressway section is an overpass and elevated project that runs through the main trunk lines in western Shanghai, connecting Yan'an West Road Viaduct, Outer Ring Road and Huqingping Highway of Hongqiao Airport. Mileage stake No. of the main line is 0-035.22-1+472.28. The whole bid section is composed of 69 main line bridges, N and S ramp bridges, ground roads and drainage.

Topic: Construction organization design of expressway tunnel Three level technical disclosure of expressway construction Construction Scheme of Class III Highway
Nanchuan expressway Construction organization design
Highway X is located in xx Town, xx City, with the starting and ending chainages of K12+000-K17+550, and the total length of 5.550km. The contract section is a mountainous and heavy hilly area with complex terrain and great fluctuation. The nearby roads extend in all directions, and the transportation conditions are good. This section is designed according to the four lane standard of expressway, with a design driving speed of 100km/h, a subgrade width of 26.0m, a design load of automobile - over 20, a check load of trailer - 120, a design flood frequency of 1/300 for super large bridges, and 1/100 for large and medium bridges.

Topic: Construction organization design of expressway tunnel Technical organization scheme for expressway construction Model of highway construction organization design
Anhui expressway Construction organization design/
A-B (Huangwei) Expressway is a section of C-D Highway in the national key highway planning. At the same time, it is also an important part of the "West Vertical" (Bozhou Fuyang A Anqing Dongzhi Highway) in the main framework planning of the highway in Anhui Province. It starts from Fuyang A Expressway and ends at B (Huangwei) Qianshan Expressway, with a total length of 72.287km.

Topic: High speed construction organization design Construction organization of expressway tunnel Highway construction organization design
Anhui expressway Construction organization design
Construction organization design of a highway in Anhui Province Construction organization design of a highway in Anhui Province Construction organization design of highway

Topic: Construction organization design of expressway tunnel Anhui residential building construction organization design Construction organization design of secondary highway
Anhui expressway Construction organization design
Construction organization design of an expressway in Anhui Construction organization design of an expressway in Anhui Construction organization design of an expressway in Anhui

Topic: Construction organization design of expressway tunnel Anhui residential building construction organization design Construction organization design of secondary highway
Anhui expressway Construction organization design
Construction Organization Design of Anhui Expressway Construction Organization Design of Anhui Expressway Construction Organization Design of Anhui Expressway

Topic: Construction organization design of expressway tunnel Anhui residential building construction organization design Technical organization scheme for expressway construction
some expressway Bidding construction organization design
Bidding construction organization design of an expressway
Anhui expressway Construction organization design
A to B (Huangwei) Expressway in Anhui Province is a section of C to D Highway in the national key highway planning. At the same time, it is also an important part of the "West Vertical" (Bozhou Fuyang A Anqing Dongzhi Highway) in the main framework planning of the highway in Anhui Province. It starts from Fuyang A Expressway and ends at B (Huangwei) Qianshan Expressway, with a total length of 72.287km.

Topic: High speed construction organization design Construction organization of expressway tunnel Highway construction organization design
Erguang expressway Construction organization design
Erenhot Guangzhou (referred to as "Erguang" for short) Expressway is the sixth longitudinal line of the planned national expressway network, which is also the seventh longitudinal line in the Overall Layout Plan of Guangdong Expressway Network. The Zhugang Huaicheng section of the Erguang Expressway in Lianzhou, Guangdong Province, is located in the mountainous area in the northwest of Guangdong Province. The north end connects with the Hunan section of the Erguang Expressway. Jiuyi Mountain Tunnel is set up to enter Guangdong from Hunan, extending southward through Qingyuan Lianzhou, Liannan, Lianshan, Zhaoqing Huaiji, and the south end connects with Huaiji South interchange of the Huaiji Sanshui section of the Erguang Expressway, with a total length of about 167.8km.

Topic: Construction organization design of expressway tunnel Expressway Design and Construction Contract Summary of expressway construction
some expressway Construction organization design of the first section
The starting point of the widening project is located at the Guzhu hub at the intersection of Hangyong Expressway and Shangsan Expressway, starting at K60+600, and connected with the first phase of Hangyong widening

Topic: Construction organization design of expressway tunnel Construction organization design of secondary highway Model of highway construction organization design
A project expressway Construction organization design
This project is a civil engineering contract section 1 of an expressway. The whole bid section is located in Longling County, Baoshan City, the main line is mostly located in Nitang Village, Longjiang Township, and the interchange is located in Xiaotianba Village, Zhen'an Town. The contract section starts and ends at AK0+000 ～ K3+727.69, with a total length of 4.38798km (including the main line at K1+390.95 ～ K3+727.69, with a length of 2336.74m; the Xiaotianba interchange has 5 ramps with a length of 7244.88m).

Topic: High speed construction organization design Construction organization of expressway tunnel Highway construction organization design
Benliao expressway Construction organization design
This contract section includes subgrade earthwork, extra large, large, medium and small bridges and culverts, access bridges, protection works, drainage works and other works. Including 1 main line bridge, 11 ramp bridges (7 major bridges, 4 medium bridges), 1 medium bridge, 1 Gonggong separated bridge, 3 passage bridges, as well as 1 medium bridge, 1 small bridge, 1 Gonggong separated bridge and 3 passage bridges reconstructed and expanded from the original Shenyang Shanhaiguan Expressway. Culvert works include 2 circular pipe culverts, 1 extended box culvert and 6 circular pipe culverts.

Topic: Construction organization design of expressway tunnel Construction organization design of secondary highway Model of highway construction organization design
A section expressway Construction organization design
A section of Zhoukou Expressway is a section in Henan Province. The project is one of the transportation arteries in Henan Province and an important part of the main skeleton of high-grade highways in Henan Province.

Topic: Construction Scheme of a Section of Expressway High speed construction organization design Construction organization design of expressway tunnel
Feng Yong expressway Construction organization design
The construction organization design of Xi'an Xianyang Expressway in Shaanxi Province mainly involves bridge, subgrade, culvert, interchange, etc.

Topic: High speed construction organization design Construction organization of expressway tunnel Highway construction organization design
Weilai expressway Construction organization design
Weilai Expressway is located in the central and western part of Shandong Peninsula. The terrain is a plain and hilly area. Along the line, it is dominated by denuded hills. Among the hills, there is a piedmont alluvial peneplain landform. The geological condition is good.

Topic: Construction organization design of expressway tunnel Expressway Design and Construction Contract Summary of expressway construction
Ji Qi expressway Construction organization design
Construction organization design of Ji Qi Expressway Implementation construction organization design. Lixin Huainan Section.

Topic: Construction organization design of expressway tunnel Expressway Design and Construction Contract Summary of expressway construction
expressway Cover of construction organization design
This document is the cover of expressway construction organization design. The contents are detailed and can be used for reference.

Topic: Cover of construction organization design Construction organization design of expressway tunnel High speed construction organization design
expressway Model of construction organization design
Model of expressway construction organization design Model of expressway construction organization design Model of expressway construction organization design

Topic: Construction organization design of expressway tunnel Model of expressway construction scheme Model of highway construction organization design
Xuanda expressway Construction organization design
This data is the construction organization design of Xuanda Expressway. It is valuable and detailed for reference.

Topic: Construction organization design of expressway tunnel Expressway Design and Construction Contract Fire protection design of expressway
Yongning expressway Construction organization design of a tunnel
National expressway network - xx to xx, XX contract section of xx to xx expressway in xx province, the route of this contract section is located in Mingxi In xx, the line starts at xx (K31+860) in xx Town and ends at the end of XX contract section. It enters xx County through xx, passes through Wudi Tunnel, and ends near Wudi fluorite mining area (K40+800). The total length of the line is 8.703073 km (236.927 meters shorter at K35+086=K35+322.927 where the chain is broken).

Topic: Construction organization design of expressway tunnel Four electric interface project of expressway tunnel construction organization Code for construction of expressway tunnels
A person in Hubei Province expressway Construction organization design
With the guiding ideology of meeting the actual construction needs, based on the construction drawing design, with the goal of ensuring the quality, safety, construction period and environmental protection of the project, and in the principle of high quality, efficiency, economy and rationality, the company operates according to the requirements of the quality system established by the ISO9001:2000 standard that our company has passed.

Topic: Flood control in Hubei Province Hubei Construction Contract Hubei Construction Contract
expressway Monitoring Construction Organization Design (1). doc

Topic: Construction organization design of expressway tunnel Expressway monitoring construction scheme Design of Fire Monitoring System for Expressway
Anhui expressway Construction Organization Design (2). doc

Topic: Construction organization design of expressway tunnel Anhui residential building construction organization design Technical organization scheme for expressway construction
expressway Construction organization design scheme (2)
Expressway construction organization design scheme (2), The content is detailed and rich, which can be downloaded by netizens.

Topic: Highway construction organization design scheme Construction organization scheme of expressway tunnel High speed construction organization design
expressway Bidding documents for construction organization design
This document is a bidding document for expressway construction organization design, which is detailed and can be used for reference.

Topic: Construction organization design documents Basis for preparation of bidding documents Bidding Documents and Construction Contract
expressway Construction organization design scheme
Expressway construction organization design scheme Expressway construction organization design scheme Expressway construction organization design scheme

Topic: Highway construction organization design scheme Construction organization scheme of expressway tunnel High speed construction organization design
Shen Dan expressway Engineering design scheme
The construction quantity of embankment in this contract section is large, with a total filling volume of 1.36 million cubic meters. Due to the settlement and stability problems of embankment, especially the possible stability problems of high embankment, the construction quality is required to be high, so the requirements are relatively high in terms of base treatment, filler selection, drainage measures, compaction standard control, etc., so as to ensure the stability and durability of subgrade

Topic: Fire protection design of expressway Expressway budget estimate Design and construction scheme of expressway
expressway Construction organization design of double arch tunnel
All tunnel works in K17+854 ～ K18+279 section of XX tunnel in XX contract section of XX expressway. Including excavation, support, waterproof and drainage, pavement and monitoring measurement works.

Topic: Construction scheme of expressway double connected tunnel Construction organization design of expressway tunnel Construction organization of expressway tunnel
Guangdong expressway Construction organization design of landslide treatment
The landslide to be treated is located on the left side of K20+800 ～ K20+935 section of Section 5 of a highway in xx province. It is about 65m long in the north-south direction and 135m long in the east-west direction. It is arc-shaped on the plane and has a height difference of 22m between the front and rear edges.

Topic: Construction Scheme for Landslide Treatment of Expressway Guangdong Expressway Construction Scheme High speed construction organization design
some expressway Full set of construction organization design scheme
K # #+# # - K # #+# # subgrade, pavement, bridge and culvert, protection, drainage and communication pipelines, toll facilities civil works, etc. The subgrade fill of the whole section is 1947800 m3, the asphalt pavement is 796.03 km2, there is one major bridge, one medium bridge, two interchanges, one separation interchange, 10 culverts and 15 channels.

Topic: Construction scheme of expressway organization design Full set of construction scheme for expressway Construction organization of expressway tunnel