Construction organization design of bridge works (complete)

Uploaded on: 2019-09-21 09:18:02 come from: Road and bridge municipal administration / Road and bridge works / traffic engineering

zero

4 points

The project is XXX. Due to the impact of long-term scouring, the revetment at both sides of the bridge bottom has been hollowed out, and the cushion cap and pile foundation of the maintenance stairs are exposed, which seriously affects the safety of the bridge foundation. In order to ensure the safety of stair handrails, it is necessary to reinforce and maintain the revetments at both sides of the bridge bottom, and reinforce the cushion caps of the maintenance stairs. The main quantities include: silt excavation, filling, steel pipe bored cast-in-place pile, mortar block material, light colored granite veneer outside the retaining wall, and light colored granite guardrail.

Construction organization design of bridge works (complete) - Figure 1

Construction organization design of bridge works (complete) - Figure 2

Construction organization design of bridge works (complete) - Figure 3

Construction organization design of bridge works (complete) - Figure 4

Construction organization design of bridge works (complete) - Figure 5

Click to download the source file now

Special statement: This material belongs to the sharing uploaded by users Downloaded content, only for learning, not for commercial use. If there is any copyright problem, please timely contact Station delete!

Collection

WeChat code scanning and sharing

Click to share

Related recommendations

Bridge works Construction organization design (complete structural scheme)
The construction organization design of bridge works (241 pages in total, complete structural scheme) is detailed for designers' reference.

Topic: Construction organization design of a bridge project Bridge engineering survey scheme Construction Scheme for Superstructure of Bridge Works
road Bridge works Construction organization design (complete)
The project is located at the confluence of the Yangtze River and Wujiang River in Jiangdong District, Fuling District, Chongqing, bordering the Yangtze River and Wujiang River, and belongs to the eastern urban area of the Fuling River. It is one of the "one city, two districts and five areas" determined in the overall plan of Fuling District, and an important area for Fuling District to develop eastward across the Wujiang River. The subgrade is mainly the flood control and revetment comprehensive improvement embankment project on the east bank of the confluence of the Yangtze River and Wujiang River in Fuling District under construction, and the two ends are connected with the existing Fuling Feng Highway.

Topic: Construction organization design of a bridge project Code for Road and Bridge Engineering Bridge engineering data
newly build Bridge works Construction Organization Design.pdf

Topic: Construction organization design of new bridges New Bridge Construction Contract Bridge engineering data
Bridge works Construction Organization Design (with attached table). pdf

Topic: Construction organization design of a bridge project Bridge engineering data Bridge works agreement
Lu Jiacao Bridge works Construction Organization Design.pdf

Topic: Construction organization design of a bridge project Bridge engineering data Bridge project contract
Bridge works Pushing construction organization design
The construction organization design is for the construction organization design of the overpass crossing Beijing Harbin Railway on the connecting line project of Qinhuangdao Coastal Expressway Funing Section. Although it is a Class II highway, the construction technology still has technical content.

Topic: Construction organization design of a bridge project Bridge engineering data Bridge works agreement
some Bridge works Organize the design of construction scheme
A central laboratory is set up for the project to be responsible for various inspection and test work during the construction process. The central laboratory has independent reference room, concrete room, mechanics room, geotechnical room and chemical laboratory. The construction team shall be equipped with testers to assist the central laboratory in sampling at the construction site.

Topic: Construction organization design of a bridge project Construction Scheme for Bridge Works in Rainy Season Winter construction scheme of bridge works
Bridge works Special Construction Organization Design.doc

Topic: Construction organization design of a bridge project Special construction scheme for bridge works Bridge engineering data
Bridge works Special Construction Organization Design.pdf

Topic: Construction organization design of a bridge project Special construction scheme for bridge works Bridge engineering data
Bridge works Construction organization design (provided by China Railway Bridge Bureau)
This data is for the construction organization design of bridge engineering (provided by China Railway Bridge Bureau) and can be used for reference.

Topic: Construction organization design of a bridge project Bridge engineering data Bridge project contract
Class I highway Bridge works Construction organization design
The starting and ending chainages of the project are K0+000 ～ K1+422.36, the total length of the line is 1.422km, the starting and ending chainages of the viaduct are K0+403.5 ～ K0+801.87, the total length of the bridge is 398.37m, of which the total length of the bridge span is 300.04, and the total length of the approach bridge is 88.08m. The overall structure of the bridge is a simply supported beam system, which is a straight bridge. The total width of the bridge is 19 meters. The piers are double column pier shafts, large cantilever cap beams, and 40 friction pile foundations with a diameter of 1.5 meters. The upper structure is a 15 span 20 meter equal span pretensioned concrete wide hollow slab structure, of which one span spans Wuhuang Railway.

Topic: Code for highway bridge engineering Contract for Highway and Bridge Works Ranking of Highway and Bridge Engineering
An urban road Bridge works Construction organization design
**Located in the upper reaches of the Yangtze River and the hinterland of the Three Gorges Project reservoir area, the City * * District is the second largest city of * *, the political, economic, cultural and trade center in the east of * *, the land and water transportation hub of the Three Gorges Reservoir area, the tourism service base of the Three Gorges Scenic Area, and an important industrial, trade and immigration city in the reservoir area.

Topic: Construction organization design of a bridge project Bridge engineering data Bridge project contract
Roads in a city Bridge works Construction organization design
**Located in the upper reaches of the Yangtze River and the hinterland of the Three Gorges Project reservoir area, the City * * District is the second largest city of * *, the political, economic, cultural and trade center in the east of * *, the land and water transportation hub of the Three Gorges Reservoir area, the tourism service base of the Three Gorges Scenic Area, and an important industrial, trade and immigration city in the reservoir area. The impoundment of the Three Gorges Reservoir will have a greater inundation impact on * * District. Yanjiang Road is an indispensable facility to connect the existing urban roads and municipal pipelines and restore the original functions of the city.

Topic: Construction organization design of a bridge project Bridge engineering data Bridge project contract
30m T-beam Bridge works Construction organization design
The span combination of the bridge is 3 × 30m, the substructure is Φ 1.8m pile foundation+1.5m pier column, and the superstructure is low height multi ribbed prestressed T-beam. The width of the bridge is the same as the design width of the road at the bridge site, and it is divided into three bridges horizontally: the middle bridge is a motorway bridge, and the bridge deck lane is 7.5m wide; Sidewalks and non motorized road bridges are on both sides, and the full width of the bridge deck is 10 meters.

Topic: Construction organization design of a bridge project Bridge engineering data Bridge works agreement
Coal Chemical Park Road Bridge works Construction organization design
1. This project is "xx Coal Chemical Industry Park New Road Project". The road starts at S101 Provincial Highway, mileage chainage K1098+830 (coordinates N5051200.335, E494551.495), terminates in the northeast and ends on the Xingfugou oil road (coordinates N5049756.8262, E497023.2165) to the north of the gas station. It is designed as the main road in Area B of xx Coal Chemical Industry Park, with a total length of 3.00365km and a total width of 27.5m.

Topic: Construction organization design of a bridge project Bridge engineering data Bridge project contract
Shenzhen City Bridge works Construction Organization Design 2009
This data is: Construction Organization Design of Shenzhen Urban Bridge Engineering 2009, for reference.

Topic: Bridge construction Bridge engineering design Seismic design of bridge engineering
Anqing City Bridge works Construction organization design scheme
Anqing Yangtze River Bridge starts from Anqing junction of He'an Expressway on the north bank of the Yangtze River, directly connects with He'an Expressway Bridge at Shengbu, and connects with the common sections of National Highway 318 and National Highway 206 through Linghu North Road Interchange; The south is directly connected to the dividing point of National Highway 318 and National Highway 206. The bridge crosses the downtown of Anqing City, and crosses the Yangtze River valley and parts of the north and south banks at the Dongmen Bus Ferry of Anqing City, with a total length of about 5.9km. The construction of the bridge is of great significance in promoting the rapid economic development of the regions along the Yangtze River, especially the Dabie Mountains in southwest Anhui.

Topic: Construction organization design of a bridge project Bridge engineering survey scheme Bridge engineering data
Highway in a city Bridge works Construction organization design
The subgrade design shall be based on the natural conditions along the line, in the principle of adapting measures to local conditions and using local materials, select reasonable subgrade cross section form and slope gradient, and set up economic and effective drainage, protection and other designs to prevent various adverse factors from harming the subgrade and ensure that the subgrade has sufficient strength and stability. During the construction, we will make reasonable arrangements and carefully organize in strict accordance with the requirements of the bidding documents to ensure the construction quality.

Topic: Code for highway bridge engineering Contract for Highway and Bridge Works Ranking of Highway and Bridge Engineering
highway Bridge works Construction Organization Design.pdf

Topic: Code for highway bridge engineering Contract for Highway and Bridge Works Ranking of Highway and Bridge Engineering
highway Bridge works Construction Organization Design (1). pdf

Topic: Code for highway bridge engineering Contract for Highway and Bridge Works Ranking of Highway and Bridge Engineering
newly build Bridge works Construction Organization Design (2). pdf

Topic: Construction organization design of new bridges New Bridge Construction Contract Bridge engineering data
road Bridge works Construction Organization Design (Complete). pdf

Topic: Construction organization design of a bridge project Code for Road and Bridge Engineering Bridge engineering data
Class I highway Bridge works construction organization
The starting and ending chainages of the project are K0+000 ～ K1+422.36, the total length of the line is 1.422km, the starting and ending chainages of the viaduct are K0+403.5 ～ K0+801.87, the total length of the bridge is 398.37m, of which the total length of the bridge span is 300.04, and the total length of the approach bridge is 88.08m. The overall structure of the bridge is a simply supported beam system, which is a straight bridge. The total width of the bridge is 19 meters. The piers are double column pier shafts, large cantilever cap beams, and 40 friction pile foundations with a diameter of 1.5 meters. The upper structure is a 15 span 20 meter equal span pretensioned concrete wide hollow slab structure, of which one span spans Wuhuang Railway

Topic: Code for highway bridge engineering Contract for Highway and Bridge Works Ranking of Highway and Bridge Engineering
some Bridge works Full set of graduation design drawings (complete)

This is a complete set of graduation design drawings of a bridge project (complete). There are 16 drawings in total, including general structural drawing of pier, reinforcement drawing of ground tie beam, reinforcement drawing of capping beam, etc. The contents are detailed for reference.

Topic: Graduation Design of Bridge Engineering Bridge engineering design drawings Reinforcement drawing of bridge works
Bridge works Supervision Manual at Construction Stage
l、 Be fully familiar with the design drawings, check the quantities of works and errors and omissions in the drawings, and comprehensively check the structural elevation and key structural dimensions. Be familiar with the process flow and supervision procedure of each subdivisional project. 2. Master the key routes and key nodes (control works) in the construction area, understand the construction site environment, and put forward reasonable suggestions. Master the acceptance procedures and parts of concealed works. 3. Be familiar with the division of unit works, divisional works and subdivisional works, and master various construction and inspection tables. Be familiar with the construction organization design and key construction scheme approved by the Contractor, and master the phased objective requirements during the construction period. 4. Master and understand the provisions and requirements of contract documents, specifications, design documents, inspection and evaluation standards, and standardized management guidelines, and timely review and approve various construction technical schemes of the Contractor. 5. Establish the approval system for the first piece of bridge engineering, focusing on the prefabrication and installation of bridge cushion caps, pier columns, abutment bodies, precast beams, and the first piece of cast-in-place box girders and guardrails. The Supervision Engineer shall organize the Contractor to summarize and comprehensively evaluate the first piece of work, and form a summary to guide the construction. 6. Before the commencement of each subdivisional project, the construction technical documents and schemes have been approved, the construction technicians and operation teams have been in place, and the technical disclosure has been carried out to clarify the requirements for quality, safety, construction period, environmental protection, etc. Mechanical equipment has been mobilized and accepted. Various raw materials have arrived and passed the inspection. 7. The construction survey shall strictly implement the review and joint survey system to prevent errors to the greatest extent, and shall be confirmed at any time during the monitoring phase

Topic: Bridge engineering supervision contract Bridge engineering data Bridge works agreement
Municipal Bridge works -Construction organization design of a bridge (2)

Topic: Municipal bridge Model of municipal bridge construction organization design Bridge construction organization design
Bridge works Detailed construction organization design scheme
The main bridge of the project adopts fully welded flat streamline closed steel box girder, and spatial double cable plane sector steel strand stay cables. The steel box girder is 3.0m high (at the center line of the bridge), and there are 16 pairs of 64 stay cables in total. The standard anchorage spacing on the beam is 15m, and the anchorage spacing on the tower is 2.0~2.5m. The connection with the cable tower is steel box anchorage, and the connection with the main beam is anchor box anchorage. The stay cable is tensioned at the tower end.

Topic: Construction organization design of a bridge project Bridge engineering survey scheme Bridge engineering data
Bridge works Construction organization design of double tower cable-stayed bridge
Xxxxxx is located at about 2km downstream of xxxx in the south of xx urban area. The south bank starts from xx, and the north bank ends at the second ring underpass bridge of Fumin Street. The whole project consists of the main bridge, the approaches on both banks and their ancillary works. It is the main project of the new trunk road crossing xx from the urban area to Hunnan Development Zone.

Topic: Construction scheme of double tower cable-stayed bridge Construction organization design of a bridge project Construction organization design of field bridge engineering
A landscape Bridge works Implementation of construction organization design
XX Investment Corporation plans to build the second phase road of XX South Road in the planning area of XX New Town. The contract section of this project starts at K0 ＋ 000 and ends at K0 ＋ 560. This section is 560 meters long. A south bridge across the "Landscape XX Lake" will be built between K0 ＋ 316.2 and K0 ＋ 476.2. The proposed south bridge is a three span prestressed concrete continuous box girder, with single spans of 45m, 70m and 45m respectively. The bridge is 160m long and 39.5m wide, roughly in east-west direction. It is an urban bridge, with a design deck elevation of 10.12-11.02m. The bridge plane is located on the left circular curve with R=360m, and the longitudinal plane is located on the vertical curve formed by the design longitudinal slope of 1.9% and - 1.9%. The radius of the vertical curve is R ＝ 3500m, and the depth of soft soil at the bridge site is up to 5-10m.

Topic: Construction organization design of a bridge project Bridge engineering data Bridge project contract
some Bridge works Detailed construction organization design scheme
The design scope of the project is K0+082 to Junshan Road intersection (including Junshan Road intersection), and the total length of the main line is about 744m. This place belongs to the alluvial plain of the Yangtze River Delta, and the landform is relatively simple. The Xicheng Canal is about 80m wide, and the old Xicheng Canal is about 50m wide. The ground elevation is about 4.45m, and the terrain is relatively flat. The ground elevation of the island at the main pier is about 3.3m.

Topic: Construction organization design of a bridge project Bridge engineering survey scheme Bridge engineering data
A city Bridge works Construction organization design scheme
This project is bid section D of GN Avenue, and viaducts are used for the whole main line. The project mainly includes the main line viaduct and ramp, drainage, pedestrian overpass and other projects. The construction height of the bridge works is up to 22.8m, divided into two layers and four lines in total. The main line of the lower layer line b is 496.449m long, and the total length of the B ramp is 316.213m; Line a on the upper layer is 513.545m long, and Ramp A is 380.314m long. The foundation adopts bored (punched) cast-in-place piles with diameters of 1.2m and 1.5m.

Topic: Construction organization design of a bridge project Construction scheme of bridge works Construction scheme of a bridge project
Class I highway Bridge works Construction organization design
This project is a key project of municipal construction in XX City. Starting from XXX in the north and connecting with XX Avenue in the south, it is the import and export channel of XX Science Park. The project is designed by XX Highway Survey and Design Institute and constructed by an engineering bureau.

Topic: Code for highway bridge engineering Contract for Highway and Bridge Works Ranking of Highway and Bridge Engineering
Road in a middle school in Kunshan Bridge works Construction organization design
The project is located in a middle school campus, and the project scope includes road, bridge and stone revetment works. Road works: 15cm C20 concrete pavement shall be constructed after the existing concrete pavement is roughened. The bridge works are as follows: the existing bridge body is demolished, the standard span of the new bridge is 10m, and the deck width is 3.5+2 × 0.3=4.1m. The upper structure is cast-in-place reinforced concrete hollow slab beam, and the lower structure is C25 reinforced concrete abutment body and foundation. The revetment works are as follows: gravity masonry retaining wall is used around the pond at the bridge site, and the bottom of the pond is paved with masonry. The project quality grade is qualified; Construction period: 210 calendar days.

Topic: Construction organization design of a bridge project Bridge engineering data Bridge project contract
Municipal Avenue of a city Bridge works Construction organization design
Section I Basic Information xx Bridge on xx Avenue in a city is a medium bridge in the expansion project of xx Avenue. The angle between it and the centerline of xx Avenue is 60 degrees. The starting and ending points of the bridge are K2+361.5 ～ K2+374.5, with a span of 13m. The bridge deck clearance is: net 2.0m (sidewalk)+9.0m (bridge deck clear width)+0.455m (isolation belt) (double connection, isolation belt in the middle), and the bridge deck cross slope is 1.5% (one-way), The seismic intensity is 6 degrees.

Topic: Construction organization design of municipal bridge engineering Municipal Avenue Construction Contract Approval of municipal bridge works
Chenjiagou Bridge works Construction organization design scheme
According to the distribution of this bridge and considering the economy of concrete and beam forming transportation, a prefabrication yard is set up on the completed subgrade of K36+300-K36+600 excavation section, with 12 pedestals.

Topic: Construction organization design of a bridge project Bridge engineering survey scheme Bridge engineering data
Municipal roads Bridge works Construction organization design
Construction organization design of municipal road and bridge works Construction organization design of municipal road and bridge works Construction organization design of municipal road and bridge works

Topic: Construction organization design of municipal roads and bridges Approval of municipal bridge works Code for municipal bridge engineering
Class I highway Bridge works Construction Organization Design.doc

Topic: Code for highway bridge engineering Contract for Highway and Bridge Works Ranking of Highway and Bridge Engineering
A municipal road Bridge works Construction organization design
The Qingyi Highway freight corridor is located in the west section of Xinyu urban area of Qingyi Highway. It is an important transportation corridor from Xinyu City to Fenyi County, and an important highway route for logistics transportation of large enterprises and units such as Saiwei, Xingang, Jiangli, etc. This section is a Class II highway built in 1995 according to the standards issued by the Ministry, with a subgrade width of 12.0 meters (pavement width of 9.0 meters, and soil shoulders on both sides of 1.5 meters), The pavement is cement concrete pavement. The starting mileage of this section is K0+000, and the ending mileage is K11+879.44, with a total length of 11.87944km. It mainly includes subgrade works, bridge and culvert structure works, crossing works, protection and drainage works, pavement base and pavement works, greening and environmental protection works. The contract section is designed according to three different technical standards; After the old pavement of K2+200~K4+500, K5+440~K7+400, K8+200~K8+920 sections is crushed, the asphalt pavement structure layer 4CM upper layer (AC-16C)+6CM middle surface layer (AC-20C)+10CM lower layer (AC-25C)+20CM5% water stabilized upper base layer+20CM water stabilized lower base layer is paved, with a total thickness of 61CM After the old pavement of K8+920~K11+879.440 section is crushed and petrified, the asphalt pavement structure layer is paved. The upper layer (AC-10C) of 4CM thickness+the middle layer (AC-20C) of 5CM thickness+the lower layer (AC-25C) of 7CM thickness M+20CM5%, the water stabilized upper base+18CM3.5% water stabilized lower base, with a total thickness of 55CM. After the pavement of K0+000~K2+200, K5+140~K5+440, K7+400~K8+200 sections is excavated, the asphalt pavement asphalt structure 4cm upper layer (AC-16C)+6cm middle surface layer (AC-20C)+10cm lower layer (AC-25C)+20cm5% water stabilized upper base layer+20cm3.5% water stabilized lower base layer is paved, with a total thickness of 61cm From K4+500-K5+140 section, continuous reinforced concrete is 22cm, continuous reinforced concrete is 15CM5%, and the total thickness is 35cm.

Topic: Construction organization design of a bridge project Construction Contract for Tunnel and Bridge Works Bridge engineering data
[Henan] Pingdingshan Branch Municipal Administration Bridge works Construction organization design
[Henan] The construction organization design of the municipal bridge project of Pingdingshan Branch Road is detailed for designers' reference.

Topic: Construction organization design of municipal bridge engineering Henan Municipal Bridge Project Approval of municipal bridge works
Hydro junction Bridge works Construction Organization Design (140 pages)
This data is the construction organization design of the bridge works in the site of the Pangduo Water Control Project, with a total of 140 pages of overview: the Pangduo Water Control Project is located in the middle reaches of the Lhasa River basin, which is a large-scale water control project focusing on irrigation and power generation, as well as comprehensive utilization of flood control and urban water supply. Pangduo Water Control Project is mainly composed of asphalt concrete core sand gravel dam, flood discharge tunnel, flood discharge and diversion tunnel, water diversion and power generation system and irrigation water tunnel. The total storage capacity of the reservoir is 11.74 × 108m3, the installed capacity of the power station is four, and the total installed capacity is 160MW.

Topic: Construction Organization Design of Songtao Water Control Project Construction organization design of a bridge project Construction organization design of field bridge engineering