Civil Engineering Online
data
forum
curriculum
AI Specification
Package
APP

Download mobile client
product
Exchange Mall live broadcast Software meeting

Good manners, civil servant! Free and low price collection It is necessary for engineers to upgrade, and a full set of project data package is coming!

/ register
Sign in
news dynamic zero

Loading

View all messages Message settings

Loading

View All Dynamics Message settings

Engineering database \ electrical engineering \ Electrical construction design \ Construction disclosure \ Safety technical disclosure of beam concrete pouring construction

Click to download the source file now

Safety technical disclosure of beam concrete pouring construction

Uploaded on: March 20, 2019 12:13:38 come from: electrical engineering / Electrical construction design / Construction disclosure

zero

5 points

Before pouring concrete, the stability of formwork and support shall be checked, and the reinforcement shall be accepted and documented before pouring concrete; The concrete pouring shall be carried out according to the procedures specified in the construction design, and shall not be changed without authorization.

Safety technical disclosure of beam concrete pouring construction - Figure 1

Safety technical disclosure of beam concrete pouring construction - Figure 1

Safety technical disclosure of beam concrete pouring construction - Figure 2

Safety technical disclosure of beam concrete pouring construction - Figure 2

Safety technical disclosure of beam concrete pouring construction - Figure 3

Safety technical disclosure of beam concrete pouring construction - Figure 3

Click to download the source file now

Special statement: This material belongs to the sharing uploaded by users Downloaded content, only for learning, not for commercial use. If there is any copyright problem, please timely contact Station delete!

share

WeChat code scanning and sharing

Click to share

Related recommendations

A square concrete Pouring technical disclosure
Designate special personnel to clean the 5cm wide bottom mortar around the reserved holes, distribution boxes, grooves and boxes on the wall, spray water for wetting, and plaster the edges of the holes, boxes, grooves and boxes with cement mixed mortar to be square, smooth and flat; For the wall with large excavation, first fill it with fine aggregate concrete, the surface layer is plastered in layers, and glass fiber mesh cloth is added. The side and top plastering of the door opening and the large surface plastering shall be formed in one time, and secondary construction is strictly prohibited.

Topic: Technical disclosure of concrete pouring
beam concrete Safety technical disclosure of mixing construction
All electrical wiring set in the mixing plant must be led and disassembled by electricians; In case of leakage signs and cable damage during operation, the machine must be stopped and powered off immediately, and the electrician shall handle it; When it is necessary to enter the mixing drum for operation, the power must be turned off, cut off, and the switch box must be locked. A special person shall be assigned outside the mixing drum for supervision. It is strictly prohibited to leave the post.

Topic: Technical disclosure of channel lining construction Concrete mixing Safety technical disclosure of asphalt concrete construction Safety technical disclosure of concrete construction in winter
Beam prefabrication concrete Technical disclosure of component construction safety
When the concrete is compacted by vibrating the bottom formwork, the bottom formwork shall be set on the elastic support.

Topic: Safety technical disclosure of concrete prefabrication Safety technical disclosure of external wall components Safety technical disclosure of precast pile construction
Beam prefabrication concrete Technical disclosure of component construction safety
When the horizontal overlapping method is used to prefabricate components, the concrete pouring of upper components can be carried out only after the concrete strength of lower components reaches more than 30% of the design strength. Reliable isolation measures should be taken between the upper and lower concrete.

Topic: Safety technical disclosure of concrete prefabrication Safety technical disclosure of external wall components Safety technical disclosure of precast pile construction
beam concrete Safety technical disclosure of mixing construction.doc

Topic: Technical disclosure of channel lining construction Concrete mixing Safety technical disclosure of asphalt concrete construction Safety technical disclosure of concrete construction in winter
beam concrete Technical disclosure of transportation safety
After operation, the internal combustion engine shall be shut down first, and then the material trough, mixing drum inlet and supporting wheel shall be washed, and the concrete caking shall be removed. When it is necessary to enter the mixing drum to remove the caking, the switch key of the internal combustion engine must be removed, and a special person must be assigned for supervision.

Topic: Technical disclosure of concrete transportation Full technical disclosure of concrete curing About concrete technical disclosure
beam concrete Maintenance safety technical disclosure
Before boiler installation, an application shall be submitted to the competent department for approval; The boiler room shall be set separately to meet the requirements of fire protection and environmental protection.

Topic: Technical disclosure of concrete curing safety Technical disclosure of concrete pouring and curing Concrete curing
beam concrete Technical Disclosure of Transportation Safety.doc

Topic: Technical disclosure of concrete transportation Full technical disclosure of concrete curing About concrete technical disclosure
beam concrete Technical Disclosure of Maintenance Safety.doc

Topic: Technical disclosure of concrete curing safety Technical disclosure of concrete pouring and curing Concrete curing
Pouring of rigid skeleton concrete Safety technical disclosure of arch ring
During the pouring of arch ring concrete, it shall be tracked and monitored at any time. In case of any abnormality, it shall be timely adjusted according to the monitoring scheme to make the arch axis position meet the design requirements.

Topic: Technical disclosure of concrete pouring arch skeleton Safety technical disclosure of concrete pouring Safety technical disclosure before concrete pouring
Pouring on arch frame concrete Safety technical disclosure of arch ring
All electrical wiring set in the mixing plant must be led and disassembled by electricians; In case of leakage signs and cable damage during operation, the machine must be stopped and powered off immediately, and the electrician shall handle it; When it is necessary to enter the mixing drum for operation, the power must be turned off, cut off, and the switch box must be locked. A special person shall be assigned outside the mixing drum for supervision. It is strictly prohibited to leave the post.

Topic: Safety technical disclosure of concrete pouring Technical disclosure of concrete pouring and curing
Pouring on arch frame concrete Safety technical disclosure of arch ring
When the arch ring is closed, the concrete strength shall meet the design requirements. If there is no design specification, the arch ring concrete poured in sections shall reach 75% of the design strength before the arch closure; When the stress of arch ring is adjusted by jack pressure before closing the arch, the arch ring and the poured spacer concrete must reach the design strength before closing the arch.

Topic: Safety technical disclosure of concrete pouring Technical disclosure of concrete pouring and curing
Pouring of rigid skeleton concrete Safety technical disclosure of arch ring
Before construction, the arch ring concrete pouring method, procedure and monitoring method shall be specified according to the design documents and site environmental conditions. The strength, rigidity and stability of the rigid skeleton shall be checked to confirm that they meet the requirements of each construction stage.

Topic: Technical disclosure of concrete pouring arch skeleton Safety technical disclosure of concrete pouring Safety technical disclosure before concrete pouring
Manual hole digging pile concrete Pouring safety technical disclosure
The vibrating operator working in the hole shall set up a firm temporary working platform, which shall be firmly set on the retaining wall flange rather than on the stirrup

Topic: Technical disclosure of manual hole digging pile concrete pouring Manual hole digging pile Technical disclosure of concrete pouring of microporous pile
concrete Safety technical disclosure of pouring suspended work.xls

Topic: Safety technical disclosure of hanging operation on external wall Technical disclosure of concrete pouring Technical disclosure of concrete pouring
Beam prefabrication concrete Technical disclosure of component construction safety. doc

Topic: Safety technical disclosure of concrete prefabrication Safety technical disclosure of external wall components Safety technical disclosure of precast pile construction
Beam of construction project concrete Safety technical disclosure of pouring construction
When using trolley to transport concrete, the front baffle of the car trough must be installed, and the loading should be 10 cm lower than the car trough; During unloading, a firm cover shall be set, and it is strictly prohibited to spread the handle

Topic: Safety technical disclosure of concrete pouring Technical disclosure of concrete pouring for construction road Technical disclosure of concrete pouring and curing
7 - Pile foundation concrete Technical disclosure of pouring construction
7 - Technical disclosure of pile foundation concrete pouring construction 7 - Technical disclosure of pile foundation concrete pouring construction 7 - Technical disclosure of pile foundation concrete pouring construction 7 - Technical disclosure of pile foundation concrete pouring construction

Topic: Technical disclosure of civil concrete pouring workers Technical disclosure of mass concrete construction Technical disclosure of external wall insulation
Foundation cushion concrete Pouring technical disclosure
. 1 Material preparation: C15 commercial concrete (slump 160mm ± 20mm), Ф 48 short steel pipe, multi-layer board, 100mm × 100mm batten, steel bar head, P.042.5 cement, medium sand, steel plate mesh for pump pipe erection.

Topic: Technical disclosure of cushion concrete pouring Safety technical disclosure of foundation cushion concrete Technical disclosure of raft foundation concrete pouring
concrete Recording materials for pouring technical disclosure
After the concrete is discharged from the mixer, it shall be transported to the pouring place in time. During transportation, concrete segregation, cement slurry loss, slump change and initial setting shall be prevented

Topic: Technical disclosure record of concrete pouring Technical disclosure of concrete pouring and curing
concrete Record data of pouring technical disclosure
Medium sand is used. There is a retest report. The mud content (by weight) shall not be greater than 3% when the concrete grade is higher than or equal to C30. Not more than 5% below C30. The sand for C10 concrete can be relaxed as appropriate.

Topic: Technical disclosure record of concrete pouring Technical disclosure of concrete pouring and curing
Beam, slab and column of a workshop concrete Pouring technical disclosure
The slump of concrete entering the pump shall be controlled at 160 ± 20mm. The slump loss value per hour before entering the pump shall not be more than 30mm, and the total loss value shall not be more than 60mm. After each truck of concrete arrives at the site, its slump shall be timely detected, and the time from the time of departure to the site shall be checked to see if it exceeds the initial setting time of the concrete. If it is found that the quality of concrete does not meet the requirements, the truck concrete shall not be used.

Topic: Technical disclosure of beam, slab and column concrete Technical disclosure of concrete pouring Technical disclosure of concrete pouring
Dunhuang Station Building concrete Pouring technical disclosure
Cement: The type and strength grade of cement shall be determined according to the design requirements, and the quality shall comply with the current cement standards. When the construction period is tight, quick cement measurement can be carried out. If necessary, the manufacturer is required to provide a report on the alkali content of cement.

Topic: Technical disclosure of concrete pouring
beam concrete Engineering safety technical disclosure design
Safety technical disclosure of beam concrete pouring construction, and safety technical disclosure of beam precast concrete component construction

Topic: Full technical disclosure of concrete curing Technical disclosure of exterior wall decoration engineering Technical engineering contract
48+80+48m continuous beam concrete Pouring technical disclosure data
The beam body can be poured only after the support, formwork, reinforcement and various embedded parts of the beam body are checked to be qualified. During the pouring, the beam body shall be poured and vibrated symmetrically in longitudinal sections, in horizontal layers, from bottom to top, and layer by layer.

Topic: Technical disclosure of continuous wall concrete pouring Technical disclosure of floor heating concrete pouring Technical disclosure of foundation concrete pouring
Pouring on arch frame concrete Safety technical disclosure of arch ring
When pouring concrete arch ring on arch frame, the installation quality of support, arch frame and formwork shall be checked, and the concrete can be poured only after it is confirmed as qualified by experience and documented.

Topic: Safety technical disclosure of concrete pouring Technical disclosure of concrete pouring and curing
Manual hole digging pile concrete Pouring safety technical disclosure
On site construction personnel must wear safety helmets and rubber gloves, and pass the three-level safety education and assessment.

Topic: Technical disclosure of manual hole digging pile concrete pouring Manual hole digging pile Technical disclosure of concrete pouring of microporous pile
For cast-in-place box girder concrete Safety and technical disclosure of pouring process
For the safety and technical disclosure of cast-in-place box girder concrete pouring process, the superstructure of the project is cast-in-place box girder, which is poured with C50 high-performance concrete. The height of the box girder is 2.1-2.2m, the thickness of the bottom plate is 40-22cm, and the thickness of the top plate is 50-25cm. The box girder is divided into upper and lower construction sections and poured. The content can be downloaded for reference.

Topic: Technical disclosure of cast-in-place concrete pouring Safety technical disclosure of concrete pouring in beam fabrication yard Safety technical disclosure of high formwork concrete pouring
A manual hole digging pile concrete Pouring safety technical disclosure
This document is the technical disclosure of the concrete pouring safety of a manual hole digging pile. The contents are complete and can be downloaded

Topic: Technical disclosure of manual hole digging pile concrete pouring Manual hole digging pile Technical disclosure of concrete pouring of microporous pile
Pouring on arch frame concrete Arch ring safety technical disclosure. doc

Topic: Safety technical disclosure of concrete pouring Technical disclosure of concrete pouring and curing
Pouring of rigid skeleton concrete Arch ring safety technical disclosure. doc

Topic: Technical disclosure of concrete pouring arch skeleton Safety technical disclosure of concrete pouring Safety technical disclosure before concrete pouring
Cantilever casting prestress concrete Technical disclosure of continuous beam construction
Process procedures and operation points, preloading construction process, quality control and inspection

Topic: Technical disclosure of civil concrete pouring workers Technical disclosure of cantilever concreting of hanging basket Prestressed concrete construction technology
Pile foundation underwater concrete Safety technical disclosure of pouring construction
In the process of pouring underwater concrete, measures must be taken to prevent the tremie from water ingress and blocking, pipe burying and hole collapse; In case of any of the above situations, the reason shall be identified, the operation shall be improved and handled in a timely manner. In case of serious hole collapse, the pouring of concrete must be stopped immediately, the tremie and reinforcement skeleton shall be put forward, and the backfilling shall be carried out according to the technical requirements; In case of broken pile, the treatment scheme shall be studied with the design and construction (supervision).

Topic: Technical disclosure of underwater concrete pouring Technical disclosure of pile foundation concrete Underwater pile foundation construction
Cast in place pile foundation underwater concrete Safety technical disclosure of pouring construction
The equipment capacity for lifting the tremie shall be able to overcome the dead weight of the tremie and the concrete in the tremie and the bonding resistance between the inner and outer walls of the embedded part of the tremie and the concrete, and have certain safety reserves; The depth of the tremie embedded in the concrete shall comply with the technical regulations

Topic: Technical disclosure of underwater concrete pouring Technical disclosure of pile foundation concrete Underwater pile foundation construction
concrete Construction safety technical disclosure record
The contents contained in the technical disclosure record of concrete construction safety of outdoor works are for reference only..

Topic: Concrete safety technical disclosure record Construction safety technical disclosure record Communication construction safety technical disclosure record
Cast in situ concrete Construction safety technical disclosure
1. When plastering the exterior wall, it is strictly prohibited to remove or cut off the external scaffold and the anchor points of the building at will. If it is necessary to remove the scaffold due to obstructing the work, it must be reinforced with the consent of the person in charge on site. 2. Before starting the mortar machine, hand-held electric drill, stone grinder, cutting machine and other machines, check whether the mechanical parts are damaged and whether the machine operates normally when empty. The full-time personnel must pull the power line, connect the switch socket and install the anti leakage switch. The operators should wear insulating gloves and insulating rubber shoes

Topic: Safety technical disclosure of asphalt concrete construction Technical disclosure of concrete road safety Technical disclosure of road concrete safety
sulfur concrete Construction safety technical disclosure
This data is the safety technical disclosure of sulfur concrete construction, which is valuable and detailed for reference.

Topic: Safety technical disclosure of asphalt concrete construction Technical disclosure of concrete road safety Technical disclosure of road concrete safety
Safety technical disclosure of cantilever cast-in-place beam construction
Installation of hanging basket, reinforcement construction, prestressed tensioning

Topic: Safety technical disclosure of cast-in-place beam Technical disclosure of cast-in-place concrete beam of bridge Safety technical disclosure of cast-in-place concrete side ditch
concrete Project safety technical disclosure
All rules and regulations for safe production must be observed when entering the construction site. 2. During the construction of concrete works at night, the team members shall be on duty, the construction lighting shall be sufficient, the self-protection measures shall be reliable, and the construction and safety requirements shall be met. 3. The operation of the vibrating rod must be in the charge of a specially assigned person. It is forbidden for other people to move around. Before using the vibrating rod, check the cable of the vibrating rod to ensure that it is not damaged or leaked. The leakage protection is safe, effective, sensitive and reliable. When the vibrating rod is stopped, cut off the power supply immediately. 4. All operators are prohibited from fatigue operation and continuous shift. 5. All operators must wear complete and effective labor safety protection articles, especially those who hold vibrating rods must wear safety helmets, insulating gloves, insulating shoes and protective clothing.

Topic: Full technical disclosure of concrete curing Technical engineering contract Technical disclosure of exterior wall decoration engineering
Small box girder concrete Technical disclosure of pouring construction
Acceptance of tie rod parameters: the setting position of the tie rod is consistent with the disclosure, the model and material of the tie rod are qualified, and the connecting bolt, nut and base plate of the handrail are reliable and effective (the base plate is made of 1cm thick steel plate, the rib is made of 8 # channel steel, and the nut is made of two nuts at one end, and the exposed length is more than 3cm

Topic: Technical disclosure of civil concrete pouring workers Technical disclosure of mass concrete construction Technical disclosure of external wall insulation

Click to see more

All comments I want to comment

No comment

Open VIP and enjoy premium privileges

Savings per VIP member user two hundred and thirty-nine element

5 million data
Free Trials
Advertising shielding
Exclusive customer service

Click to open the free download privilege now

Recommendations

Safety technical disclosure of beam concrete pouring construction Safety technical disclosure of beam concrete pouring construction.doc Safety technical disclosure of concrete pouring Safety technical disclosure of concrete pouring (mason) Safety technical disclosure of concrete pouring and vibration Safety technical disclosure of concrete beam bridge pouring Concrete pouring safety technical disclosure record Safety technical disclosure of bridge concrete pouring construction Safety technical disclosure of concrete pouring construction.doc Safety technical disclosure of beam concrete mixing construction

Data upload

Share information, and you will get a share of download income
Data upload
Customized requirements

You are satisfied with the customized package of personal data
I want to submit
Original cooperation

Welcome copyright agencies to cooperate with us to achieve a win-win situation
Contact customer service
Designer certification

Certified designers have the privilege to withdraw cash
I want to certify

About us | contact us | Website Statement | Help Center | Site Map | Civil Engineering Online Mobile Edition

Copyright © 2000-2024 Changzhou Yibao Network Service Co., Ltd. All rights reserved Su B2-20220726