Construction scheme for energy conservation and thermal insulation of building exterior wall

Uploaded on: 2018-07-25 21:29:26 come from: Water supply and drainage / Water supply and drainage construction design / construction plan

zero

4 points

The external thermal insulation system of exterior wall is an external thermal insulation system of exterior wall with polystyrene rigid foam board as the thermal insulation layer, protective mortar and glass fiber mesh cloth as the enhanced protective layer, and decorative mortar and exterior wall paint (or exterior wall brick) as the finishing layer.

Construction scheme for energy conservation and thermal insulation of building exterior wall - Figure 1

Construction scheme for energy conservation and thermal insulation of building exterior wall - Figure 2

Construction scheme for energy conservation and thermal insulation of building exterior wall - Figure 3

Construction scheme for energy conservation and thermal insulation of building exterior wall - Figure 4

Construction scheme for energy conservation and thermal insulation of building exterior wall - Figure 5

Click to download the source file now

Special statement: This material belongs to the sharing uploaded by users Downloaded content, only for learning, not for commercial use. If there is any copyright problem, please timely contact Station delete!

Collection

WeChat code scanning and sharing

Click to share

Related recommendations

Special construction of external wall insulation and plastering programme
The external wall thermal insulation system of this project uses the expanded vitrified bead inorganic thermal insulation slurry (single component dry mixed mortar) external wall combined thermal insulation system. 1.2.1 Building insulation structure The exterior wall of the project is made of stone like paint, and the exterior wall is made as follows: 15 thick special plastering mortar, plastered twice Brush interface mortar once 20 thick expansion vitrified bead inorganic thermal insulation mortar (single component dry mixed mortar) 4 thick crack resistant mortar, one layer of alkali resistant glass fiber mesh cloth embedded in the mortar 5 thick polymer cement mortar Anti crack flexible waterproof putty leveling Brush one coat of primer Two coats of surface coating

Topic: Construction scheme for external wall thermal insulation and plastering Special construction scheme for exterior wall plastering coating Special construction scheme for internal and external wall plastering
Foam glass external wall insulation construction programme
In this project, foam glass external thermal insulation system is made after plastering the concrete beam column, parapet and masonry wall of the external wall. The specific method is to treat the interface agent of the base wall → 18-20 thick R (D) P15 (1:3 cement mortar) Plastering mortar leveling → matching adhesive bonding 35 thick foam glass → second batch scraping matching special mortar and pressing alkali resistant glass cloth → matching special putty batch inlaying.

Topic: Construction scheme of foam glass insulation for exterior wall Concrete foam insulation construction scheme Foam concrete insulation construction scheme
Special construction of external wall insulation works programme
XX relocation house and supporting facilities are group buildings, including 1 #~13 # residential buildings and 1 #, 2 # underground garages, with a total construction area of 232576.6m2, 1 #~13 # residential buildings with a construction area of 214743.25m2, two floors underground, 17~21 floors above the ground, 2.8m high above the ground, cutting board foundation, cast-in-place reinforced concrete shear wall structure, seismic fortification intensity of 8 degrees, and building functions as high-rise residential buildings and auxiliary underground garages, The design service life is 50 years.

Topic: Special construction scheme for external wall insulation works
Thermal insulation construction of external wall of a residence in Xi'an programme
2.1 General overview: project name: * * * * 1 #, 2 # Building # 3 Constructor: Xi'an * * * Real Estate Development Co., Ltd. Designer: Shaanxi * * * * Architectural Design Engineering Co., Ltd. Supervisor: Quality and Safety Supervision Station of * * * * District, Shaanxi Province Supervisor: Xi'an * * * * Project Management Co., Ltd. Constructor: Regional General Contracting Department of Beijing * * * Group Co., Ltd. Project Department Construction site: South of * * * * Road, Xi'an* *Building function: reasonable service life of commercial and residential buildings: 50 years; Seismic fortification intensity of building: 8 degree Structural form: cast-in-place reinforced concrete shear wall structure Building area:

Topic: Xi'an external wall insulation construction scheme Construction Scheme of External Wall Thermal Insulation for Multi storey Residential Buildings Construction Scheme for External Wall Thermal Insulation of Residential Quarter
Detailed special construction of external wall insulation programme
The total construction area of the project is about 16790 square meters. The project mainly includes two separate projects, namely Area A of the office building and the archives. The office and teaching building has a building area of 10379 square meters, a nine storey frame, a design height of 34.3 m, and a building axis size of 60 m × 21 m; The building area of the archives is 6411 square meters, and it is a four storey frame structure. The design height of the building is 17.7m, and the axis size is 59.1m × 31.2m

Topic: Special construction scheme for external wall insulation External wall insulation construction scheme ppt How to construct external wall rock wool insulation
Detailed construction of external wall insulation works programme
Jianghuai Renjia Community Phase II 12 # Building Project is located on the east side of the community 2 # building. The foundation is a strip foundation, and the main body is a 6-story frame structure with special-shaped cross section frame columns; The attic roof is pitched roof. ± 0.000 is equivalent to the Yellow Sea elevation of 14.100 m. The 15 # building project is located in the northeast of the 5 # building in the community. The foundation is strip foundation, and the main body is a 6-story frame structure and special-shaped section frame column; The attic roof is pitched roof.

Topic: Construction scheme for external wall insulation Construction scheme for external wall insulation 7147618407
Exterior wall insulation construction of a project programme .doc

Topic: Construction scheme for external wall thermal insulation External wall insulation construction scheme ppt How to construct external wall rock wool insulation
Construction of Extruded Thermal Insulation Board for Exterior Wall of an Apartment programme
The external thermal insulation works of exterior wall shall be subject to concealed inspection after pasting the polystyrene board and acceptance after plastering. Hidden inspection record form and project quality acceptance record form.

Topic: Thermal insulation construction scheme of exterior wall extruded board Technical disclosure of external wall thermal insulation of extruded board Technical disclosure of external wall thermal insulation extruded board
External wall insulation construction of reconstruction project programme
The construction site of this project is located at No. 700, Xiangyang Road, Datong County, Xining City, Qinghai Province, which is the reconstruction project of the old city and shantytown of Datong County Lot 2. The total building area of the project is 38232.43 ㎡ for 12 # podium building and 45480.1 ㎡ for 13 # podium building. The structural form is frame supported shear wall structure. The number of floors of the building is 12 # podium building, which has 1 underground floor and 4 overground floors. The main building has 1 underground floor and 22 overground floors. 13 # podium building, which has 1 underground floor and 4 overground floors, has 2 underground floors and 26 overground floors. The total height of the main structure is 83.3 meters, and the foundation is a flat raft foundation. The seismic grade of the foundation from the top to the top frame column of the fourth floor is special grade I, the foundation top to the top frame beam column of the fourth floor is grade I, the foundation top to the top shear wall of the seventh floor is grade I, the shear wall above the seventh floor is grade II, and the podium foundation top to the fourth floor is grade III. The service life is 50 years.

Topic: Construction scheme of external wall thermal insulation transformation External wall insulation construction scheme ppt
Extruded board external wall internal insulation construction programme
1. Project introduction Project name. The project is located in a frame shear wall structure. The external wall internal insulation system is made of extruded gypsum composite board. The project uses extruded gypsum composite board insulation system to achieve the purpose of building energy conservation, and the insulation construction area is about square meters.

Topic: Construction scheme of external wall internal insulation extruded board Technical disclosure of external wall internal insulation of extruded board Construction scheme for thermal insulation bay window in exterior wall
Thermal insulation construction of external wall of xxxx programme .doc

Topic: Construction scheme for external wall insulation Construction scheme for external wall insulation 7147618407
Construction of building energy conservation divisional works programme Design (external wall insulation)
Overview of divisional and subdivisional works of building energy conservation, preparation basis, construction management organization chart, construction scheme

Topic: Construction scheme of building energy conservation divisional works Construction scheme of building energy-saving external wall insulation Construction scheme of building energy-saving and thermal insulation exterior wall
Thermal insulation construction of external wall of high-rise civil building programme
Project overview, construction description, construction conditions, construction tools, construction procedures, key points of construction operation

Topic: Construction scheme for high-rise insulation of external wall High rise construction scheme of civil buildings Construction scheme of building external wall thermal insulation particles
Thermal insulation construction of external wall of building residence programme Design
Preparation basis, construction deployment and task arrangement, construction preparation, construction process and technology, quality standards and quality assurance measures, environmental protection and safe and civilized construction

Topic: Construction Scheme for External Wall Thermal Insulation of Residential Buildings Design external wall insulation construction scheme Design and construction scheme of external wall thermal insulation
Energy saving and thermal insulation construction of an apartment in Shanxi programme
****Building 13 # of the Garden was developed by Shanxi * * * Real Estate Development Co., Ltd., designed by * * * * Architectural Design Institute, supervised by Shanxi * * * Construction Engineering Supervision Company, and contracted by * * * Construction Company of Guangsha Construction Group. The building area is 36355m2, with two floors underground and 29 floors above the ground. It is a frame shear wall structure with a building height of 90.85m. The shape coefficient of the project is 0.20, with the ratio of south window to wall of 26%, north window to wall of 20.4%, and east-west window to wall of 21.3%. 60mm thick polystyrene foam board with an average heat transfer coefficient of 0.77W/m2. k is set on the exterior walls, beams and columns facing north, and 50mm thick polystyrene foam board with an average heat transfer coefficient of 0.68W/m2. k is set on the exterior walls, beams and columns facing east, west and south. 60mm thick polystyrene foam plastic board is used for the roof, and the average heat transfer coefficient of the roof is 0.77W/m2.k. All external doors and windows of the residence and apartment are single push double glass plastic steel doors and windows, with a thermal conductivity of 2.7W/m2. k. All doors are insulated doors. 80mm thick flame-retardant polystyrene foam board is pasted on the bottom of the basement roof, with an average heat transfer coefficient of 0.97W/m2.k.

Topic: Shanxi insulation construction scheme Energy saving and thermal insulation construction scheme Construction scheme for thermal insulation and energy conservation
A special construction of roof insulation and energy conservation programme
The ****** building, the first underground floor and the 14 above ground floors of the project, the first underground floor is 4.99m high, the first floor is 4.1m high, the second floor is 3.8m high, and the third to fourth floors are 2.9m high. The elevation of the roof tower is 46.8m. The accessible roof and the non accessible roof are made of 70 thick flame retardant extruded boards. The insulation layer around the junction of the roof and the external wall and the roof opening is made of 70 thick foam cement insulation board (Class A) flame retardant tape with a width of no less than 500. The leveling layer is 30 mm thick C20 fine aggregate concrete.

Topic: Special construction scheme for roof insulation and energy conservation Curtain wall thermal insulation and energy saving construction scheme Construction scheme of residential energy-saving and thermal insulation
Detailed construction of energy-saving and thermal insulation works programme
The external wall filling material of the project is designed as 200mm thick shale perforated brick. Hollow vitrified bead thermal insulation mortar or xps extruded polystyrene board with different thickness shall be made for the external wall, cold and hot bridge and floor respectively; Xps extruded polystyrene board with different thickness shall be made for the side wall and roof of basement roof.

Topic: Energy saving and thermal insulation construction scheme Energy saving construction scheme of wall external wall insulation Energy saving and thermal insulation construction contract
Special construction of roof insulation and energy conservation programme
Preparation basis, project overview, construction equipment and machinery, operating conditions, construction technology, quality requirements, finished product protection

Topic: Special construction scheme for roof insulation and energy conservation Roof energy saving scheme Curtain wall thermal insulation and energy saving construction scheme
Energy saving construction of an external wall curtain wall project programme
1. Basis for preparation of organization plan: bidding documents, design drawings, construction contract and actual site conditions of the project. 2. Main technical specifications and standards adopted (see construction design drawings for details) 3. Principles of preparation? To implement the principles, policies, laws and regulations of the Party and the state on project construction, and strictly implement the construction procedures? The construction organization design scheme is a guiding document for the specific implementation of the project; a. The construction personnel must be familiar with and master the construction organization design scheme, and carry out the project construction according to its contents. b. The disclosure shall be made to the construction personnel so that they can clearly understand and master the standards, requirements and construction methods. c. In the construction process, four steps should be taken: planning, implementation, inspection and treatment. d. According to the actual situation of the construction project, timely adjust and modify the content. e. Report the contents of adjustment and modification to the Owner, the General Contractor and the Supervisor in a timely manner? Our project department will construct the project with the idea of strict organization, scientific arrangement and ensuring key points? The construction organization design shall be prepared in accordance with the construction process and technical rules, and the construction procedures and sequence shall be reasonably arranged;

Topic: Energy saving construction scheme for curtain wall works Energy saving curtain wall scheme Curtain wall energy saving scheme
Energy saving construction of exterior wall curtain wall works programme
1. According to the technical requirements of the drawings, the overall design disclosure shall be carried out for the requirements of the whole project and some necessary technical requirements. 2. The technical disclosure shall be conducted in written form (technical disclosure record), and all personnel of the Project Management Department shall participate. Make all construction personnel fully understand the designer's intention to ensure the overall effect of curtain wall installation. 3. The specific standard node practices and the use of some materials shall be clarified in the design disclosure to ensure the uniformity of practices and the accuracy of material purchase. 4. Be fully familiar with the drawings, and fully understand the layout form of main keel, installation form of curtain wall, node requirements, fire prevention, lightning protection and other special requirements, so as to master them as soon as possible. 5. For some doubtful points in the drawings, contact the designer as soon as possible to make the drawings more accurate and clear.

Topic: Energy saving construction scheme for exterior wall curtain wall Curtain wall energy conservation project Energy saving of curtain wall
Energy saving and thermal insulation construction of a hospital building in Changping programme
The project is located in the hospital of * * * Hospital, 2 floors underground; Nine floors above the ground, with a total height of 45m. Design overview of internal and external walls: energy-saving design is as follows: 2.1. Beijing is a cold area, which shall comply with the Beijing Municipal Standard for Energy Efficiency Design of Public Buildings (DBJ01-621-2005). 2.2. The external window is aluminum alloy bridge cutoff and thermal insulation window, and the glass is double tempered hollow coated low radiation glass. The thermal indexes of the external window (including transparent curtain wall) are as follows: 2.3. Glass roof color aluminum alloy bridge cutoff thermal insulation profile, hollow coated radiation laminated safety glass, heat transfer coefficient K ≤ 2.70W/m2 K, Sun shading coefficient SC ≤ 0.50 2.4. 250 thick ceramsite concrete blocks shall be used as the external wall materials, and "15 thick glue powder polystyrene particles+25 thick plastic extrusion board+10 thick glue powder polystyrene particles" composite insulation layer shall be used for the facing bricks, with a total thickness of 50. See the atlas "External wall 56M" of 08BJ1-1 Engineering Methods for details, and the heat transfer coefficient K=0.76W/m2 K (heat transfer coefficient of local reinforced concrete exterior wall K=0.80W/m2 K）； 40 thick extruded polystyrene board insulation layer is selected for the metal exterior wall and stone plinth. In combination with the external wall system setting, refer to the atlas "57" of (08BJ1-1 Engineering Practice) and the thermal calculation review, the heat transfer coefficient K=0.69W/m2 K。 2.5. The solid roof adopts the centralized method in the drawing 08BJ1-1 Engineering Practice, and 50 thick extruded polystyrene board is used for thermal insulation. Except for the machine room floor roof, "flat roof 25 - mortar surface roof" is used, the rest are "flat roof 16 - anti-skid tile roof" 2.6. If there is an outdoor space above the roof of the basement, 50 thick extruded polystyrene board insulation layer shall be selected. 2.7. 70 thick extruded polystyrene board insulation layer shall be selected at the place where the bottom surface of overhead floor or overhanging reinforced concrete floor touches the outdoor air. 2.8. Floors in non heating and air-conditioning rooms; In this project, "non heating and air-conditioning room" includes the equipment pipe interlayer between the second and third floors of the basement, and the partition board or floor slab of the heating and air-conditioning room adjacent to the above area includes (a) the roof of the second floor of the basement; (b) The second floor roof and (C) equipment pipe interlayer roof. 2.9. The external windows and transparent curtain walls have openable parts, and the opening mode is hanging from the top. 2.10. It is required that the curtain wall, external doors and windows, etc., and the enclosure structure of the main building should be filled with non polyurethane foam thermal insulation materials. 2.12. It is required that the deformation joints at the roof and exterior wall should be equipped with finished fire retardant and thermal insulation layers.

Topic: Energy saving construction scheme for hospital buildings Construction scheme of building energy-saving external wall insulation Construction scheme for energy conservation and thermal insulation of roof buildings
Energy saving and thermal insulation construction of a residential building in Hebei programme
Project Name * * Industrial Base (Residential Project) Phase I Construction and Installation Project Construction unit * * ZTE Development Co., Ltd Designer: Beijing Construction Engineering Design Company Supervisor * * Construction Engineering Consulting Co., Ltd Construction unit * * Group Co., Ltd Contracting mode General contracting 537 calendar days The construction period starts on June 12, 2008, and starts on July 25, 2008 to ± 0.00 (excluding the underground garage); The quality standard meets the qualification standard of Unified Standard for Construction Quality Acceptance of Building Engineering (GB50300-2001); At the same time, it meets the requirements of Chapter III Engineering Construction Standards of the Bidding Document. Safe and civilized construction meets Beijing and Hebei standards Project scale Total construction area: 98683.22 square meters Project address Yanjiao Economic and Technological Development Zone, * * City, Hebei Province Engineering nature Civil

Topic: Construction Scheme for Building Energy Conservation in Hebei Province Energy saving construction scheme of internal thermal insulation building Construction scheme of building energy-saving external wall insulation
Energy saving and thermal insulation construction of buildings programme Design
Project overview, preparation basis, construction deployment, construction progress assurance measures, construction preparation and resource allocation plan, main construction methods and technical measures

Topic: Construction scheme of building energy conservation and thermal insulation Special construction scheme for building energy efficiency design Formwork of special construction scheme for building energy conservation
Energy saving construction of exterior wall insulation of high-rise complex building in Hubei Province programme
Our company's quality policy is to live and develop with quality. Our project management department has established an effective standardized quality management system by carefully studying the relevant regulations, specifications and standards of building energy conservation projects, strengthening quality awareness, and can make all work of building energy conservation projects under good control.

Topic: Construction Scheme of High rise Complex Building Hubei Safe Construction Scheme Energy saving and thermal insulation construction scheme of high-rise exterior wall
YT environment-friendly energy-saving wall insulation powder external wall insulation construction programme
External thermal insulation of external walls of public buildings and civil buildings in severe cold and cold regions, hot summer and cold winter regions and hot summer and warm winter regions has good frost resistance, water resistance, aging resistance and weather resistance, especially in the wall construction, the flow resistance, crack resistance and adhesive strength are very significant. It has outstanding advantages in hot melting, construction, safety, environmental protection, fire protection and cost.

Topic: Construction scheme of environmental protection and thermal insulation powder Construction scheme of external wall insulation Construction scheme of external wall insulation wall
Energy saving and thermal insulation construction of exterior wall of Four Seasons Commercial and Residential Building in Peninsula programme file
1. Project name: Hongji Tower A Commercial and Residential Building 2. Construction site: Qinhuangdao Harbor Area 3. Building purpose: the basement is a parking garage (wartime level VI civil air defense material warehouse) and equipment room; The first to fourth floors are commercial buildings; The fifth to thirtieth floors are residential buildings. 4. Total construction area: 44209 square meters; Ground floor area: 41374.4 square meters; Including commercial building area: 7715 square meters; The residential building area is 33659.4 square meters; Underground building area: 2834.7 square meters (including underground fire pool). 5. Number of building floors: 1 underground and 30 above ground. 6. The building height is 99.6.0 meters. 7. External wall of above ground frame structure: 200 thick aerated concrete block wall

Topic: Qingdao external wall insulation construction scheme Qingdao External Wall Insulation Exhibition Special construction scheme for external wall thermal insulation and energy conservation
Energy saving and thermal insulation of external wall and reconstruction of courtyard road programme Construction organization design
This construction organization design construction scheme, full text Song typeface four, standard layout, neat layout, word form is only for reference, please adjust according to the project situation, see the table of contents.

Topic: Construction scheme of energy-saving exterior wall reconstruction Special construction scheme for external wall thermal insulation and energy conservation Construction scheme of energy-saving and thermal insulation mortar for exterior wall
Construction of external wall thermal insulation scaffold programme
Steel pipe fastener type double row scaffold, the horizontal distance of the upright tube is 0.3M, the distance between the connecting upright tube and the wall is 30CM, and the distance between the large horizontal tube and the wall is 1.8M. The bottom sweeping rod must be set for the core filling of the upright tube base The project is located in frame structure. The erection area is 1500 square meters and the erection height is 6.3M.

Topic: Construction scheme of external wall insulation scaffold Construction Scheme for Scaffold in Construction Works Scaffold construction scheme for construction works
Construction of external wall insulation inside the formwork of building works programme
Steel wire mesh polystyrene sandwich board: it is a flame retardant material, with an apparent density of 20kg/m3 and a full external dimension thickness of 60mm. One side of the polystyrene board is provided with a groove with a depth of about 10mm. There is galvanized steel wire mesh on the side close to the tooth slot. The steel wire mesh and the oblique inserted web wire penetrating the benzene plate form a steel wire mesh frame. Φ 2 galvanized steel wire shall be used for steel mesh and inclined web wire, and the mesh size of steel mesh shall be 50mm × 50mm. One side of the steel wire of the steel wire mesh polystyrene board is evenly sprayed with interface mortar to increase the bonding force between the cement mortar and the benzene board, and prevent the aging caused by ultraviolet radiation.

Topic: Construction scheme for external wall thermal insulation of building engineering Construction Scheme for Large Formwork of Building Engineering Construction Scheme for Stair Formwork of Building Engineering
Architectural decoration plastering works and external wall insulation construction programme
The construction of the plastering works of this project must be carried out after the intermediate structure transfer acceptance by relevant departments is qualified; Before construction, the project department must make a detailed construction and safety technical disclosure to the construction team. Before the plastering of the wall of the project, the sample wall must be plastered first. Large area construction can be carried out only after the sample wall is qualified in the plastering inspection.

Topic: Construction Scheme for Exterior Wall Decoration and Thermal Insulation Construction scheme of building external wall thermal insulation particles Construction Scheme for External Wall Thermal Insulation of Residential Buildings
Energy saving and thermal insulation construction of exterior wall of Four Seasons Commercial and Residential Building in Peninsula programme -Classic design
This data is: construction scheme for energy conservation and thermal insulation of exterior wall of Peninsula Four Seasons Commercial and Residential Building - Dianshang Design, with detailed contents for reference.

Topic: Qingdao external wall insulation construction scheme Qingdao External Wall Insulation Exhibition Special construction scheme for external wall thermal insulation and energy conservation
YT environment-friendly energy-saving wall insulation powder external wall insulation construction programme file
1.1 YT environmental friendly energy-saving wall insulation powder is a special dry matter powder with superior thermal insulation performance. It is a lightweight thermal insulation material made of natural lightweight materials as aggregates, natural plant protein fibers, and many inorganic modified materials and inorganic curing materials through various hierarchical processing and factory configuration. The produced products can be directly used for external wall plastering or face brick pasting after only adding water and mixing at the construction site. It not only completely replaces the function of ordinary mortar to smooth the wall, but also has excellent thermal insulation and heat insulation performance, good frost resistance, water resistance, aging resistance and weather resistance, especially in the wall construction, the hanging flow, crack resistance and adhesion are very significant. It has outstanding advantages in hot melting, construction, safety, environmental protection, fire protection and cost. 1.2 Product technical performance index Project unit index value PH value ------------ 7 slurry density Kg/m3 611 dry density Kg/m3 396 linear shrinkage% ≤ 0.1 compressive strength Kpa 355 bond strength Kpa 629 thermal conductivity coefficient W/m.k 0.054 thermal storage coefficient W/m2. k 3.0 1.3 Product appearance and packaging white powder, free of impurities, paper and plastic meet the requirements of bagging. 1.4 Scope of application External thermal insulation of public buildings and civil buildings in severe cold and cold regions, hot summer and cold winter regions, hot summer and warm winter regions, with good frost resistance, water resistance, aging resistance and weather resistance, especially in the construction of walls, the flow resistance, crack resistance and adhesive strength are very significant. It has outstanding advantages in hot melting, construction, safety, environmental protection, fire protection and cost.

Topic: Construction scheme of environmental protection and thermal insulation powder Construction scheme of external wall insulation Construction scheme of external wall insulation wall
Energy saving and thermal insulation construction of 21580 ㎡ exterior wall roof doors and windows in Anshun City programme
Project Name: Market Town Resettlement Site in Yangwu Township, Xixiu District 2017 Relocation Project for Relocation of Poverty Alleviation in Relocated Areas The surrounding environment of Yangwu Township, Xixiu District, Anshun City is mountainous or cultivated land with a building area (m2) of 21580 ㎡ and a building height (m) 7.22m foundation design grade B foundation form strip rubble concrete foundation main structure brick concrete structure seismic grade IV seismic fortification intensity VI number of floors above ground 2 number of underground floors 0 site category II design grade II design service life 50 years fire resistance rating I roof waterproof grade I

Topic: Energy saving construction scheme of roof external wall doors and windows Construction of exterior wall doors and windows Construction scheme for thermal insulation and energy conservation of doors and windows
YT environment-friendly energy-saving wall insulation powder external wall insulation construction programme .doc

Topic: Construction scheme of environmental protection and thermal insulation powder Construction scheme of external wall insulation Construction scheme of external wall insulation wall
Energy saving and thermal insulation construction of buildings in a city programme
The shear wall structure is used for the high-rise residential building and basement project of No. 32 and 33 buildings in Liancheng Community, and the design service life is 50 years. The foundation of the project adopts manual hole digging piles. The building project has 33 floors above the ground and one floor below the ground, with a floor height of 3.60m. The 32 # and 33 # high-rise residential buildings are connected with the civil air defense works of the 2 # basement, and the other part is the property management room, community room and underground garage. The first floor above the ground is an overhead floor with a height of 4.900m; The second to thirty third floors are high-rise residential buildings, and the standard floor height is 2.900m; The height of the building is 97.70m, and the shape coefficient is 0.38. The total construction area is 70164.19m2, of which the aboveground construction area is 61778.34m2.

Topic: Construction scheme of building energy conservation and thermal insulation Formwork of special construction scheme for building energy conservation Special construction scheme for building energy efficiency design
Thermal insulation construction of exterior wall of high-rise residential buildings programme
The project is located in XX District, with Guangbo Road to the south, Hedong Road to the north and Aodong Road to the west. It is invested by Qingdao Gaoshi Real Estate Co., Ltd., designed by Qingdao Ruidu Architectural Design Co., Ltd., supervised by Qingdao Guanghua Construction Supervision Co., Ltd., and contracted by Jiangsu Nantong Third Construction Group Co., Ltd. The total high-rise building area of XX Community Phase II commercial housing project is 44203.39m2, including 107830.9m2 of total floor area above the ground (included in the floor area ratio) and 37438.95m2 of total underground building area. Seven high-rise residential buildings (E6 F6、F7、G1、G2、G3、G4）。 The thermal insulation material of the main wall of the external wall is 60mm thick polystyrene board, and 5 thick plastering mortar; The external wall insulation material is polystyrene board, with a density of 22kg/m3, a thermal conductivity of 0.041W/(m.K), and a combustion performance of Class B1. A 300mm wide horizontal fire isolation belt shall be set in every two layers, and the material shall be 55mm thick Grade A rock wool board with a density of 106kg/m3. The thermal insulation material for the top and bottom plates of bay windows is 50mm thick extruded plate 32kg/m3, the thermal conductivity is 0.030W/(m.K), the compression strength is>250KPa, and the combustion performance is Class B1. The thermal insulation material for flat windowsill and other structures is 15mm thick polystyrene board, with a density of 22kg/m3, a thermal conductivity of 0.041W/(m.K), and a combustion performance of Class B1. The thermal insulation material of the thermal insulation layer around the junction of the roof and the external wall and the roof opening is a 500 mm wide, 55 mm thick Grade A rock wool board with a density of 106 kg/m3.

Topic: Construction Scheme of External Wall Thermal Insulation for High rise Residential Buildings Construction process of exterior wall of high-rise residence Roof construction scheme of high-rise residential buildings
Construction of polystyrene board external wall insulation system programme
2.1 HT-A-1 special adhesive. 2.2 HT-B-1 special plaster mortar. 2.3 HT-A/B-2 special glue agent and plastering glue (two-component; composed of HT-AB-2 special glue and HT-AB-2 special dry mixture). 2.4 HT-A/B-3 dry powder special adhesive and plaster mortar.

Topic: Construction scheme of polystyrene board external wall insulation Technical disclosure of polystyrene board external wall insulation Technical disclosure of polystyrene board insulation for exterior wall
Exterior wall insulation construction in cold regions programme
50mm thick EPS polystyrene board (18kg/m3) is selected, which has low thermal conductivity, excellent moisture resistance, and stronger compression and shear properties. The two sides of EPS board are roughened to increase the bonding area.

Topic: Construction scheme for external wall thermal insulation of residential area Study on concrete construction method in winter in cold area Outdoor fire protection design in cold areas
The most complete external wall insulation construction programme
External power supply equipment, electric mixer, slotter, angle grinder, electric hammer, weighing scale, close tooth hand play, wallpaper knife, steel wire brush, putty knife, trowel, internal and external corner clamp, wire support board, 2m guiding rule, ink fountain, etc.

Topic: Complete construction scheme of external wall insulation Polyurethane insulation construction scheme for exterior wall Stp external wall insulation construction scheme
Construction of integrated board for external wall insulation and decoration programme
Construction Scheme of Exterior Wall Thermal Insulation and Decoration Integrated Panel Construction Scheme of Exterior Wall Thermal Insulation and Decoration Integrated Panel Construction Scheme of Exterior Wall Thermal Insulation and Decoration Integrated Panel

Topic: Construction Scheme of Exterior Wall Decoration and Thermal Insulation Integrated Panel Technical disclosure of integrated board for external wall insulation and decoration Construction Scheme of Sichuan Integrated Insulation Board