Construction organization design of a first-class highway bridge project

Uploaded on: 2018-05-12 19:59:17 come from: Road and bridge municipal administration / Road and bridge construction design / Construction organization design

zero

4 points

This project is a key project of municipal construction in XX City. Starting from XXX in the north and connecting with XX Avenue in the south, it is the import and export channel of XX Science Park. The project is designed by XX Highway Survey and Design Institute and constructed by an engineering bureau.

Construction organization design of a first-class highway bridge project - Figure 1

Construction Organization Design of a Class I Highway Bridge Project - Figure 2

Construction organization design of a first-class highway bridge project - Figure 3

Construction organization design of a first-class highway bridge project - Figure 4

Construction organization design of a first-class highway bridge project - Figure 5

Click to download the source file now

Special statement: This material belongs to the sharing uploaded by users Downloaded content, only for learning, not for commercial use. If there is any copyright problem, please timely contact Station delete!

Collection

WeChat code scanning and sharing

Click to share

Related recommendations

Class I highway Bridge works Model Construction Organization Scheme.pdf

Topic: Code for highway bridge engineering Contract for Highway and Bridge Works Construction scheme of highway bridge works
First class highway in a city Bridge works Construction organization design
The project of East Lake High tech Zone is a key project of Wuhan municipal construction. Starting from Guanshan 1st Road in the north to the intersection of Wuhuang 1st Class Highway, and connecting Jiangxia Avenue in the south, it is the entrance and exit channel of Wuhan Science Park. The project is designed by Wuhan Highway Survey and Design Institute and constructed by an engineering bureau.

Topic: Code for highway bridge engineering Contract for Highway and Bridge Works Ranking of Highway and Bridge Engineering
First class highway in a city Bridge works programme
The site setting out shall be carried out according to the control piles such as the recovered center stakes and the subgrade cross section, and the positions of the subgrade edge, groove, toe, side ditch, berm, borrow pit and spoil ground shall be set out.

Topic: Code for highway bridge engineering Contract for Highway and Bridge Works Ranking of Highway and Bridge Engineering
Highway in a city Bridge works Construction organization design
The subgrade design shall be based on the natural conditions along the line, in the principle of adapting measures to local conditions and using local materials, select reasonable subgrade cross section form and slope gradient, and set up economic and effective drainage, protection and other designs to prevent various adverse factors from harming the subgrade and ensure that the subgrade has sufficient strength and stability. During the construction, we will make reasonable arrangements and carefully organize in strict accordance with the requirements of the bidding documents to ensure the construction quality.

Topic: Code for highway bridge engineering Contract for Highway and Bridge Works Ranking of Highway and Bridge Engineering
highway Bridge works Construction Organization Design.pdf

Topic: Code for highway bridge engineering Contract for Highway and Bridge Works Ranking of Highway and Bridge Engineering
highway Bridge works Construction Organization Design (1). pdf

Topic: Code for highway bridge engineering Contract for Highway and Bridge Works Ranking of Highway and Bridge Engineering
Class I highway Bridge works Method Statement. doc

Topic: Construction scheme of highway bridge works Code for highway bridge engineering Contract for Highway and Bridge Works
Class I highway Bridge works Model of construction design scheme
The starting and ending chainages of the project are K0+000 ～ K1+422.36, the total length of the line is 1.422km, the starting and ending chainages of the viaduct are K0+403.5 ～ K0+801.87, the total length of the bridge is 398.37m, of which the total length of the bridge span is 300.04, and the total length of the approach bridge is 88.08m. The overall structure of the bridge is a simply supported beam system, which is a straight bridge.

Topic: Model of bridge engineering claim Model construction scheme for bridge works Bridge engineering survey scheme
First class highway in a city Bridge works Construction organization scheme
The starting and ending chainages of the project are K0+000 ～ K1+422.36, the total length of the line is 1.422km, the starting and ending chainages of the viaduct are K0+403.5 ～ K0+801.87, the total length of the bridge is 398.37m, of which the total length of the bridge span is 300.04, and the total length of the approach bridge is 88.08m. The overall structure of the bridge is a simply supported beam system, which is a straight bridge. The total width of the bridge is 19 meters. The piers are double column pier shafts, large cantilever cap beams, and 40 friction pile foundations with a diameter of 1.5 meters. The upper structure is a 15 span 20 meter equal span pretensioned concrete wide hollow slab structure, of which one span spans Wuhuang Railway.

Topic: Code for highway bridge engineering Contract for Highway and Bridge Works Construction scheme of highway bridge works
Wuhan first-class highway Bridge works Construction organization design scheme
The starting and ending chainages of the project are K0+000 ～ K1+422.36, with a total length of 1.422km; the starting and ending chainages of the viaduct are K0+403.5 ～ K0+801.87, with a total length of 398.37m, including 300.04 bridge spans and 88.08m approach bridges. The overall structure of the bridge is a simply supported beam system, which is a straight bridge. The total width of the bridge is 19 meters. The piers are double column pier shafts, large cantilever cap beams, and 40 friction pile foundations with a diameter of 1.5 meters.

Topic: Code for highway bridge engineering Contract for Highway and Bridge Works Construction scheme of highway bridge works
First class highway in a city Bridge works Organization design scheme
The starting and ending chainages of the project are K0+000 ～ K1+422.36, with a total length of 1.422km; the starting and ending chainages of the viaduct are K0+403.5 ～ K0+801.87, with a total length of 398.37m, including 300.04 bridge spans and 88.08m approach bridges. The overall structure of the bridge is a simply supported beam system, which is a straight bridge.

Topic: Code for design of highway bridge engineering Contract for Highway and Bridge Works Ranking of Highway and Bridge Engineering
highway Bridge works Construction Organization Design (2). pdf

Topic: Code for highway bridge engineering Contract for Highway and Bridge Works Ranking of Highway and Bridge Engineering
Wuhan first-class highway Bridge works Organization design scheme
The starting and ending chainages of the project are K0+000 ～ K1+422.36, with a total length of 1.422km; the starting and ending chainages of the viaduct are K0+403.5 ～ K0+801.87, with a total length of 398.37m, including 300.04 bridge spans and 88.08m approach bridges.

Topic: Code for design of highway bridge engineering Contract for Highway and Bridge Works Ranking of Highway and Bridge Engineering
Wuhan East Lake High tech Zone Class I Highway Bridge works Construction organization design
The project is listed as a key project in the overall situation and regarded as a window project of a bureau in Wuhan in terms of road and bridge projects. The technical and management excellence and authority of the bureau are mobilized to establish the project headquarters of the East Lake High tech Zone, with the deputy director as the chief commander.

Topic: Code for highway bridge engineering Contract for Highway and Bridge Works Ranking of Highway and Bridge Engineering
An expressway Bridge works Construction Form
This document is the construction form of a highway bridge project. The content includes the construction form of highway and bridge works. The contents are detailed for reference.

Topic: Expressway bridge Specification for retention of test blocks for highway bridges Shandong Expressway Bridge Maintenance Specification
highway Bridge works Construction standardization guide
The reinforcement shall be grouped by the same brand, the same furnace number and the same size. The mass of each batch shall not be more than 60t. One tensile test sample and one bending test sample shall be added for every 40t increase (or the remainder less than 40t).

Topic: Code for highway bridge engineering Contract for Highway and Bridge Works Standardization of highway and bridge
highway Bridge works Special scheme for construction safety
There are many bridges in this contract section. Except No. 3 and No. 4 bridges on E ramp of XX hub interchange and 18 overpasses along the line, cast-in-place box girders are used for the superstructure, and 30m, 25m and 20m post tensioned precast T girders are used for other bridges. The superstructure is simply supported before continuous; 13m post tensioned prestressed hollow slab is adopted for K136+402 West East Gas Transmission Separation Project. The substructure of the bridge adopts column pier, U-shaped abutment or ribbed slab abutment, and expanded foundation or pile foundation. See the list of bridge works for specific bridge forms

Topic: Special construction scheme for highway bridge works Code for highway bridge engineering Contract for Highway and Bridge Works
expressway Bridge works Construction Form
The construction form of expressway bridge works is mainly used to record the construction data of expressway bridge works for your reference.

Topic: Expressway bridge Construction Scheme of Expressway Bridge Works Table of Highway Bridge Reinforcement Construction
Wuhan first-class highway Bridge works design scheme
The starting and ending chainages of the project are K0+000 ～ K1+422.36, with a total length of 1.422km; the starting and ending chainages of the viaduct are K0+403.5 ～ K0+801.87, with a total length of 398.37m, including 300.04 bridge spans and 88.08m approach bridges. The overall structure of the bridge is a simply supported beam system, which is a straight bridge.

Topic: Code for design of highway bridge engineering Contract for Highway and Bridge Works Ranking of Highway and Bridge Engineering
Graduation Design Class I Highway Bridge works design calculation
This bridge is located in the west extension of Xinchengdu South Road in the north of Changshou, crossing Taohua River. The structure of the bridge is 3 × 30m simply supported beam bridge. The bridge starts at K0+696.217m and ends at K0+796.217m, with a total length of 100m; The plane of the bridge is located on the straight section, with a standard width of 32m.

Topic: Code for highway bridge engineering Contract for Highway and Bridge Works Ranking of Highway and Bridge Engineering
East Lake High tech Zone This project is a first-class highway in Wuhan Bridge works Construction organization design
The soil layer shall be reserved after earth excavation, and it shall be mechanically compacted and rolled to reach the bottom elevation of the cushion. The excavation depth shall be strictly controlled during construction to avoid over excavation; Otherwise, coarse sand or stone chips shall be used for backfilling, and the compactness of compacted base earthwork must reach more than 95%.

Topic: Code for highway bridge engineering Contract for Highway and Bridge Works Ranking of Highway and Bridge Engineering
highway Bridge works Construction summary report
Bid section Q4 includes two bridges with a total length of 934.4m, which are K13+935 Toudaopo Bridge with a length of 337.2m. The bridge span is 11 × 30m prestressed concrete continuous box girder, with a width of 32m and a height of 34m; The K18+770 Yuyang River Bridge is 687.2m long. The bridge span is 9 × 30m+5 × 40m+7 × 30m prestressed concrete continuous box girder. The bridge is 32m wide and 55m high.

Topic: Summary report of bridge construction Construction summary report Highway construction summary report
Anqing Yangtze River Highway Bridge works Organization design scheme
6 × 19-43-1700 steel wire rope is selected for this project, and its safety factor K=1190/203=5.9 meets the requirements. The north bank of the bridge site area is Class I terrace and Class II terrace of the high river floodplain of the Yangtze River. The riverbed is 1655m wide. The thickness of the Quaternary overburden is 23~36m, and the thinnest is 8.5m at the north side of the riverbed.

Topic: Code for design of highway bridge engineering Contract for Highway and Bridge Works Ranking of Highway and Bridge Engineering
Detailed construction organization design of first-class highway bridge
The starting and ending chainages of the project are K0+000 ～ K1+422.36, the total length of the line is 1.422km, the starting and ending chainages of the viaduct are K0+403.5 ～ K0+801.87, the total length of the bridge is 398.37m, of which the total length of the bridge span is 300.04, and the total length of the approach bridge is 88.08m. The overall structure of the bridge is a simply supported beam system, which is a straight bridge. The total width of the bridge is 19 meters. The piers are double column piers, large cantilever cap beams, and 40 friction pile foundations with a diameter of 1.5 meters.

Topic: Bridge construction organization design Highway construction organization design Model of highway construction organization design
A road Bridge works Construction organization design
This paper includes road construction, rainwater pipeline construction, sewage pipeline construction, bridge construction (PHC prestressed concrete pipe pile (type B) is used for the substructure, with a pile length of 42 meters, portal column, reinforced concrete light cushion cap, and abutment. The superstructure adopts prestressed reinforced concrete hollow slab beam, etc.

Topic: Construction organization design of a bridge project Bridge engineering data Bridge project contract
From Guanshan 1st Road in the north to Wuhuang 1st Class Highway Bridge works construction plan
When hoisting and stacking hollow slabs, the angle between the steel wire rope and the slab surface should be about 600, and the stacking layers should not exceed three. 91t tank crane and 40t trailer are used for lifting hollow slab out of the pool, secondary transfer and stacking.

Topic: Construction scheme of highway bridge works Code for highway bridge engineering Contract for Highway and Bridge Works
Cross highway Bridge works construction plan
The station access road project of XX Station of XX Railway is a supporting project of XX Railway. It is located in XX Guan, XX Township. The route starts from the exit of XX Railway Station and ends at the planned intersection. There are two major bridges and four culverts in this project. Among them, the starting and ending pile number of No. 1 Bridge of XX Bridge crossing XX Expressway is K0+066.46-K0+363.54, and the bridge length is 297.08m. The superstructure adopts 25m and 40m prestressed concrete simply supported T beams, which are post tensioned prestressed concrete precast members. The span arrangement is 6 × 25m+40m+4 × 25m. The continuous structure of simply supported bridge deck is adopted. The substructure of the whole bridge adopts pile column piers and abutments, and bored pile foundation, This bridge crosses the main line of XX expressway from the third hole under XX railway bridge to the seventh hole of the bridge. The skew angle of the bridge axis and the axis of XX expressway is а=70.1., The span of crossing hole is 40m.

Topic: Construction Scheme of Expressway Bridge Works Expressway bridge Code for highway bridge engineering
Prestress technology in highway Bridge works Application in construction
This document introduces the basic application of prestress technology in highway bridge construction.

Topic: Code for highway bridge engineering Contract for Highway and Bridge Works Construction technology of highway bridge engineering
A highway Bridge works Special scheme for winter construction and rain construction
Prepare winter construction measures, make preparations before winter construction, and prepare sufficient winter construction materials, living materials and heating appliances one month before winter. Organize construction personnel to learn relevant specifications and systems for winter construction, and carry out technical disclosure. When the daily average temperature at the construction site is lower than 5 ℃ for 5 consecutive days, the concrete construction shall be handled according to the relevant provisions for winter construction. In order to prevent the project from freezing damage due to sudden drop of temperature, pay attention to the weather changes before and after winter construction, and take timely anti freezing measures such as covering and insulation. In winter, the welding of reinforcement shall be carried out in the work shed, and the construction shall be stopped when the temperature is lower than - 20 ℃. Concrete construction shall not be arranged in winter. When construction must be carried out, effective methods such as wrapping and heat storage shall be used to ensure the concrete construction temperature. A special person shall be assigned to monitor the concrete construction temperature with a thermometer at any time to ensure the concrete construction quality. During the construction period, it shall be handled according to the current construction specifications for highway bridges and culverts, and the management and quality control of concrete raw materials shall be strengthened. Cement shall be stored in advance for insulation, and sand and gravel shall be covered to avoid ice and snow. Strengthen winter maintenance of construction machines and tools, check and maintain water tanks, oil lines, pipes and other parts frequently to prevent equipment from freezing.

Topic: Special construction scheme for bridge works Bridge engineering survey scheme Bridge engineering data
highway Bridge works Test program for concrete mix design
The purpose of concrete mix proportion test: under the condition of meeting the strength, impermeability, frost resistance and other durability of concrete and the working performance of the mixture, select the optimal sand ratio according to the aggregate gradation and workability requirements, reasonably use the surplus strength of cement, select the appropriate water cement ratio, try to reduce the cost of concrete raw materials, and further optimize the concrete mix proportion; On this basis, the concrete mix proportion meeting the design requirements of various technical indicators is proposed, and it provides reference for the supervision unit to review the concrete construction mix proportion.

Topic: Code for highway bridge engineering Contract for Highway and Bridge Works Ranking of Highway and Bridge Engineering
road Bridge works Construction organization design (complete)
The project is located at the confluence of the Yangtze River and Wujiang River in Jiangdong District, Fuling District, Chongqing, bordering the Yangtze River and Wujiang River, and belongs to the eastern urban area of the Fuling River. It is one of the "one city, two districts and five areas" determined in the overall plan of Fuling District, and an important area for Fuling District to develop eastward across the Wujiang River. The subgrade is mainly the flood control and revetment comprehensive improvement embankment project on the east bank of the confluence of the Yangtze River and Wujiang River in Fuling District under construction, and the two ends are connected with the existing Fuling Feng Highway.

Topic: Construction organization design of a bridge project Code for Road and Bridge Engineering Bridge engineering data
expressway Bridge works Technical Guide for Construction Standardization
Before the construction of bridge works, the implementation construction organization design shall be prepared in accordance with the principle of "continuity, balance, rhythm, coordination and economy". For projects with complex technical conditions, multiple schemes shall be compared and selected to prepare special construction schemes that are safe, reliable, technically feasible and economically reasonable.

Topic: Expressway bridge Standardization of highway and bridge Technical guide for standardized construction of expressway
[Fujian] cross expressway Bridge works construction plan
The station access road project of XX Station of XX Railway is a supporting project of XX Railway. It is located in XX Guan, XX Township. The route starts from the exit of XX Railway Station and ends at the planned intersection. There are two major bridges and four culverts in this project. Among them, the starting and ending pile number of No. 1 Bridge of XX Bridge crossing XX Expressway is K0+066.46-K0+363.54, and the bridge length is 297.08m. The superstructure adopts 25m and 40m prestressed concrete simply supported T beams, which are post tensioned prestressed concrete precast members. The span arrangement is 6 × 25m+40m+4 × 25m. The continuous structure of simply supported bridge deck is adopted. The substructure of the whole bridge adopts pile column piers and abutments, and bored pile foundation, This bridge crosses the main line of XX expressway from the third hole under XX railway bridge to the seventh hole of the bridge. The skew angle of the bridge axis and the axis of XX expressway is а=70.1., The span of crossing hole is 40m.

Topic: Construction Scheme of Expressway Bridge Works Expressway bridge Code for highway bridge engineering
Crossing XX Expressway Bridge works Construction scheme
The station access road project of XX Station of XX Railway is a supporting project of XX Railway. It is located in XX Guan, XX Township. The route starts from the exit of XX Railway Station and ends at the planned intersection. There are two major bridges and four culverts in this project. Among them, the starting and ending pile number of No. 1 Bridge of XX Bridge crossing XX Expressway is K0+066.46-K0+363.54, and the bridge length is 297.08m. The superstructure adopts 25m and 40m prestressed concrete simply supported T beams, which are post tensioned prestressed concrete precast members. The span arrangement is 6 × 25m+40m+4 × 25m. The continuous structure of simply supported bridge deck is adopted. The substructure of the whole bridge adopts pile column piers and abutments, and bored pile foundation, This bridge crosses the main line of XX expressway from the third hole under XX railway bridge to the seventh hole of the bridge. The skew angle of the bridge axis and the axis of XX expressway is а=70.1., The span of crossing hole is 40m.

Topic: Construction Scheme of Expressway Bridge Works Expressway bridge Code for highway bridge engineering
Construction organization design scheme for bridge construction works of first-class highway
Read the drawings carefully, listen to the technical disclosure in the joint review of drawings, and solve the unknown problems in the drawings in time

Topic: Highway construction organization design scheme Municipal bridge construction organization design scheme Fire protection design scheme of building engineering
highway Bridge works Special construction scheme for cushion cap and tie beam
This project is the third section of xx xx expressway (xx xx section). The total length of the route is 10.7km, and the starting and ending stakes are K30+109.5 ～ K40+817.951 (left line LK37+865 ～ LK40+815.728). The quantities of this section mainly include: 1.42 million cubic meters of subgrade excavation, 680000 cubic meters of filling, 90000 cubic meters of drainage protection works, 5 major bridges 5510m (single width), 2 medium bridges 78m (single width), 45 channel culverts 1211.1m/45, 1 tunnel 5031.629m/1 (single width), 3 vehicular overpasses, and 1 interchange.

Topic: Special construction scheme for highway bridge works Code for highway bridge engineering Contract for Highway and Bridge Works
Shaanxi Xi'an Chengdu Expressway Bridge works Construction organization scheme
In order to maintain the traffic of the original road, during the subgrade construction, the motor vehicles in the comprehensive plant yard of a bureau will be diverted to the left road at K0+540, and the pedestrians will be diverted to the west access road of the comprehensive plant gate of the original bureau

Topic: Expressway bridge Construction plan for expressway bridge organization Construction Scheme of Expressway Bridge Works
A highway Bridge works Special scheme for winter construction and rain construction
Prepare winter construction measures, make preparations before winter construction, and prepare sufficient winter construction materials, living materials and heating appliances one month before winter. Organize construction personnel to learn relevant specifications and systems for winter construction, and carry out technical disclosure. When the daily average temperature at the construction site is lower than 5 ℃ for 5 consecutive days, the concrete construction shall be handled according to the relevant provisions for winter construction. In order to prevent the project from freezing damage due to sudden drop in temperature, pay attention to the weather changes before and after winter construction, and take timely anti freezing measures such as covering and insulation. In winter, the welding of reinforcement shall be carried out in the work shed, and the construction shall be stopped when the temperature is lower than - 20 ℃. Concrete construction shall not be arranged in winter. When construction must be carried out, effective methods such as wrapping and heat storage shall be used to ensure the concrete construction temperature. A special person shall be assigned to monitor the concrete construction temperature with a thermometer at any time to ensure the concrete construction quality.

Topic: Special construction scheme for bridge works Bridge engineering survey scheme Bridge engineering data
expressway Bridge works Operation Instructions
For the construction of cast-in-place piles in deeper waters, an operating platform should be set up. The platform should be set up with steel pipe piles, and the beam can be shaped steel or truss. The steel pipe pile shall be sunk by means of hammering and vibration, and its bearing capacity and stability shall be ensured; The beam can be connected to the pile by welding or bolting. The platform shall be about 1m higher than the highest water level during construction; It shall be ensured that it has sufficient strength, rigidity and stability. In the river section with large flow impact force in flood season, measures should be taken to enhance the impact resistance of the platform, such as driving inclined piles, increasing the diameter of piles or strengthening the lateral connection support.

Topic: Expressway bridge Technical Instructions for Expressway Construction Specification for retention of test blocks for highway bridges
An expressway in Jiangsu Bridge works Supervision outline
Chapter XIII Supervision Methods and Measures According to the supervision contract, the project supervision work focuses on the three control objectives of project quality, progress and investment. In the whole process of construction, dynamic management is implemented and implemented in the supervision work and activities based on the principle of strict supervision, prevention first, enthusiastic service and active control. 1、 Methods and measures for project quality control (I). Quality control objectives The supervisor shall, according to relevant laws, regulations, specifications and standards, effectively control various factors affecting the project quality to make the project quality and use functions meet the requirements of the owner and the standards agreed in the contract. （2） Quality control measures 1. Preparation stage before project commencement 1). Review the Contractor's project management organization, quality management and quality assurance system; Assist and urge them to improve. 2) Organize supervisors to get familiar with the contract, construction drawing design and other documents, and fully understand the design intent and technical requirements. 3) Review the Contractor's construction organization design and special construction scheme; When necessary, it is suggested that the Owner or the Contractor organize experts to demonstrate important special plans. 4) Assist the Owner in organizing design disclosure and drawing review. 5) Review the commencement preparation work of the construction unit, organize the reexamination of the construction site 6), investigate the construction environment, evaluate the major problems or external factors that may affect the construction and quality, and formulate preventive countermeasures and measures. 7) Review the Contractor's on-site personnel and mobilization plan, and approve the Contractor's mobilization plan of construction machinery and equipment; Whether the quantity and function can meet the construction requirements. 8) Review the site commencement conditions and assist the Owner to issue the commencement order. 2. In the construction stage of the project, the supervisor's control of construction quality can be divided into pre control, in-process control and post control, which are respectively described as follows: 1) Pre control of quality a. Review the qualification of project subcontractors and subcontractors according to the provisions of the bidding documents and contract terms; b、 Review the Contractor's materials, components and parts, purchase and supply contracts according to the construction contract and design documents, and negotiate with the Owner when necessary to obtain the Owner's consent. c、 Review the construction machinery and equipment mobilized by the Contractor, and provide the technical performance inspection report of the construction machinery and equipment that have a significant impact on project quality or safety. Piling machine, prestressed equipment and hoisting (plate beam) equipment must pass the safety inspection and acceptance, and shall not enter the site for use without approval. d、 Inspect the Contractor's quality management and quality assurance system and supervise its effective implementation. e、 Urge the Contractor to establish and implement the objective management system. f、 Review the Contractor's construction setting out. g、 Review the Contractor's standard experiments and check the construction materials entering the site. Any materials not approved by the Supervisor shall not be used in the project, and the unqualified materials must be removed from the site. h、 The Chief Engineer shall organize supervisors to carefully review the construction technical scheme, especially the new process, new materials, new technology and special technical scheme with special requirements. It shall be discussed with the construction unit and repeatedly modified to improve the construction quality. i、 Check the employment with certificates for special types of work of the construction unit, and personnel without certificates shall not carry out operations for special types of work. 2) A. In the process control of quality a. The supervision work should pay attention to giving full play to the contractor's initiative in quality management, giving full play to the role of the quality assurance system, and improving quality awareness. b、 Supervise contractors to establish and improve process quality control system. All factors affecting process quality shall be included in the management status, and control points shall be established for main processes. The Supervisor shall timely check or review the quality statistics, analysis data and quality control charts submitted by the Contractor. c、 The supervisor shall urge the construction company to improve quality awareness, strengthen construction management, consciously implement specifications and operating procedures, and improve the stability of project quality. d、 The supervisor shall strengthen the process quality control. For the process prone to quality defects or ills, the professional supervision engineer shall set up quality control points, find countermeasures and determine measures to effectively prevent and control. Carry out on-site supervision on key parts and processes, strengthen intermediate inspection and technical review, and prevent potential quality hazards. e、 The inspection and acceptance system shall be strictly implemented. The professional supervision engineer shall carefully inspect each process, and accept and sign the concealed works. Without inspection and approval, it is not allowed to enter the construction of the next process. f、 The professional supervision engineer shall frequently patrol and inspect the construction quality, and if any problem is found, he shall timely propose rectification opinions or instructions to the construction director. If the rectification is not effective or persists, the Contractor may be issued with a rectification notice or an instruction to stop work for rectification. g、 The Chief Supervision Engineer shall often go deep into the site for patrol inspection, and make every process of the whole project under constant monitoring by means of patrol inspection of the Chief Engineer, patrol inspection of professional supervision engineers and on-site supervision. Focus on prevention, prevent project quality accidents, and strive to improve project quality. h、 For major quality accidents and technical problems, the supervising engineer can organize special meetings to solve them through consultation. i、 Review technical changes and countersign design changes. Without approval, the construction unit shall not change the design and original construction scheme. j、 Urge the Contractor to strengthen management. If it is found that management confusion or violation of rules and regulations caused by incompetence and dereliction of duty may endanger project quality and construction safety, the Contractor shall be advised or instructed to rectify and replace relevant personnel. 3) After the event quality control a. According to the standards and methods of project quality inspection and evaluation, check and accept the completed subdivisional, divisional and unit works, and evaluate the quality grade. b、 Supervise and check the sorting and filing of construction quality records. c. Organize the pre acceptance of the project and evaluate the project quality. d、 Assist the Owner to organize the completion acceptance e. Review the Contractor's as built drawings and as built documents f. Sort out the project supervision technical documents g. Prepare the project supervision summary report 3. The chief quality control supervision engineer within the project responsibility period often contacts and visits the Owner's representative to understand the use of the project. Professional supervision engineers shall be appointed to investigate and understand the quality defects, assist the Contractor to formulate remedial measures or repair plans, supervise the implementation, and make them meet the specified quality standards to the satisfaction of the Owner.

Topic: Expressway bridge Code of practice for highway bridge supervision Specification for retention of test blocks for highway bridges