Construction organization design of road and bridge works in an urban area

Uploaded on: 2018-05-09 23:13:05 come from: Road and bridge municipal administration / Road and bridge construction design / Construction organization design

zero

4 points

**Located in the upper reaches of the Yangtze River and the hinterland of the Three Gorges Project reservoir area, the City * * District is the second largest city of * *, the political, economic, cultural and trade center in the east of * *, the land and water transportation hub of the Three Gorges Reservoir area, the tourism service base of the Three Gorges Scenic Area, and an important industrial, trade and immigration city in the reservoir area.

Construction organization design of road and bridge works in an urban area - Figure 1

Construction organization design of road and bridge works in an urban area - Figure 2

Construction organization design of road and bridge works in an urban area - Figure 3

Construction organization design of road and bridge works in an urban area - Figure 4

Construction organization design of road and bridge works in an urban area - Figure 5

Click to download the source file now

Special statement: This material belongs to the sharing uploaded by users Downloaded content, only for learning, not for commercial use. If there is any copyright problem, please timely contact Station delete!

Collection

WeChat code scanning and sharing

Click to share

Related recommendations

A city Bridge works Construction organization design scheme
Anqing Yangtze River Bridge starts from Anqing junction of He'an Expressway on the north bank of the Yangtze River, directly connects with He'an Expressway Bridge at Shengbu, and connects with the common sections of National Highway 318 and National Highway 206 through Linghu North Road Interchange; The south is directly connected to the dividing point of National Highway 318 and National Highway 206.

Topic: Construction organization design of a bridge project Construction scheme of bridge works Construction scheme of a bridge project
A municipal administration Bridge works Construction organization design data
The second phase project of South China Road in Guangzhou was approved by the provincial and municipal governments and is located in the northeast of Guangzhou. The starting point of the project is from the southwest side of Helong Reservoir in Taihe Town, which intersects with the North Second Ring Expressway and connects with Beijing Zhuhai Expressway. The starting point is K0+000. There are four interchanges, namely Taihe, Chungang, Longdong and Censhu, and Dayuan Tunnel. The line goes south to Cen Village and connects with South China Road Phase I Project, ending at K14+760, with a total length of 14.76km.

Topic: Construction organization design of municipal bridge engineering Code for construction acceptance of municipal bridge engineering Specification for construction and acceptance of municipal bridge engineering
highway Bridge works Construction Organization Design.pdf

Topic: Code for highway bridge engineering Contract for Highway and Bridge Works Ranking of Highway and Bridge Engineering
highway Bridge works Construction Organization Design (1). pdf

Topic: Code for highway bridge engineering Contract for Highway and Bridge Works Ranking of Highway and Bridge Engineering
Class I highway Bridge works Construction organization design
The starting and ending chainages of the project are K0+000 ～ K1+422.36, the total length of the line is 1.422km, the starting and ending chainages of the viaduct are K0+403.5 ～ K0+801.87, the total length of the bridge is 398.37m, of which the total length of the bridge span is 300.04, and the total length of the approach bridge is 88.08m. The overall structure of the bridge is a simply supported beam system, which is a straight bridge. The total width of the bridge is 19 meters. The piers are double column piers, large cantilever cap beams, and 40 friction pile foundations with a diameter of 1.5 meters. The upper structure is a 15 span 20 meter equal span pretensioned concrete wide hollow slab structure, of which one span spans Wuhuang Railway.

Topic: Code for highway bridge engineering Contract for Highway and Bridge Works Ranking of Highway and Bridge Engineering
Class I highway Bridge works construction organization
The starting and ending chainages of the project are K0+000 ～ K1+422.36, the total length of the line is 1.422km, the starting and ending chainages of the viaduct are K0+403.5 ～ K0+801.87, the total length of the bridge is 398.37m, of which the total length of the bridge span is 300.04, and the total length of the approach bridge is 88.08m. The overall structure of the bridge is a simply supported beam system, which is a straight bridge. The total width of the bridge is 19 meters. The piers are double column piers, large cantilever cap beams, and 40 friction pile foundations with a diameter of 1.5 meters. The upper structure is a 15 span 20 meter equal span pretensioned concrete wide hollow slab structure, of which one span spans Wuhuang Railway

Topic: Code for highway bridge engineering Contract for Highway and Bridge Works Ranking of Highway and Bridge Engineering
A road in Hangzhou Bridge works Detailed construction organization design
The project is K3 ＋ 515.370 ～ K3 ＋ 918.060 section, with a bridge length of 390.69m, which is divided into main bridge and approach bridge; The approach bridge on both sides adopts 4 holes (north) and 7 holes (south) 25m fabricated post tensioned prestressed concrete simply supported hollow slab beam, and the main body is a three span 31m+44m+31mV pier fabricated prestressed concrete continuous T-beam bridge; The full width of the bridge deck is 38m.

Topic: Hangzhou Lighting Code Construction organization design of a bridge project Hangzhou Project Cost and Construction Contract
A road in Hangzhou Bridge works Bidding construction organization design
The preparation range is from the north end to the intersection of * * Road K3+075.690, and the south end to the intersection of * * Road K3+998.130, with a total length of 0.92km. That is, the bridge, road, protection and drainage, ancillary works and pile foundation works of the Hangzhou * * Road * bid project.

Topic: Hangzhou Lighting Code Construction organization design of a bridge project Hangzhou Project Cost and Construction Contract
A road Bridge works Bidding construction organization design scheme (print)
This document is the bidding construction organization design scheme (print) of a road and bridge project, which is detailed and can be used for reference.

Topic: Construction organization design of a bridge project Bridge engineering survey scheme Bridge engineering data
road Bridge works Material Knowledge Manual
Business Essential Engineering Materials Manual (7 volumes in total) Architecture/installation/road and bridge/rail transit/garden decoration/fire protection

Topic: Code for Road and Bridge Engineering Bridge engineering data Bridge project contract
A road in Hangzhou Bridge works Bidding construction organization
The main line of West Road is 19.924km long and divided into four construction sections. The mileage of this section is K9+400 ～ K13+800. The width of the road is 42m (60m in the long term). It is an urban trunk road with a length of 4400m. At the main line mileage k10+260 (half of Jiuchong), there is a connecting branch line to Lixinsha Interchange. The connecting branch line is widened by the use of Lisan Avenue, with the road width of 26 meters and the road section length of 1498 meters.

Topic: Hangzhou Lighting Code Hangzhou Project Cost and Construction Contract Hangzhou Lightning Protection Facilities Testing Institute
A city road in Beijing Bridge works Construction organization design
The project starts from Beihuqu West Road in the west and ends at Nanhuqu West Road in the east. The total length of the road is 1.4km. The nature of the road is urban trunk road, and the width of the red line is 40m. The scope of the project is located at the easternmost end of the planned Chengfu Road, and an interchange will be built at the intersection of Jingcheng Expressway. The implementation of this interchange will greatly improve the travel problem in Wangjing area.

Topic: Construction organization design of a bridge project Bridge engineering data Bridge project contract
Bridge works Construction organization design Word
The public infrastructure (road works) of the tourist service center of xxxxx tourist resort is located in the tourist service center area of xxx tourist scenic spot in Taizhou. The construction is to meet the growing tourism demand and improve the regional traffic network, which is of great significance to promoting the development of the local tourism economy. The company will take high-quality, strictly abide by the contract, control the cost, establish an image, and strive for higher social reputation as the guiding ideology, fully understand the design intent, based on modern, professional, mechanized, standardized construction, and combined with the construction period and the actual situation of the project construction, carry out targeted overall analysis, key process arrangement, special consideration for special parts, Scientific organization and management, reasonable site layout, practical scheme, high-quality, safe and efficient completion of the construction task of this project, and a satisfactory answer to the owner and the public.

Topic: Construction organization design of a bridge project Bridge engineering data Bridge works agreement
Municipal Bridge works Construction organization design
This project is the 9th bid section of No. 1 Bridge in the south of Harbin Hejiagou Comprehensive Renovation Project. The project is located along Hejiagou in Harbin. With a span of 16 meters, Chengnan No. 1 Bridge is 22.74 m long, 10 m wide, and 227.4 m2 of new bridge area.

Topic: Construction organization design of municipal bridge engineering Code for construction acceptance of municipal bridge engineering Specification for construction and acceptance of municipal bridge engineering
Bridge works Construction organization design data
The construction organization design of the highway bridge: the construction organization design is based on the Bidding Document for the Pilot Section Reconstruction Project of S243 Provincial Highway (Qiantang Guozhuang Section) provided by the current owner, The construction drawings of Bid S243JRQL3 of the pilot section reconstruction project of S243 Provincial Highway (Qiantang Guozhuang Section), the supplementary documents for bidding and question answering, and the construction organization design organized and prepared based on the field survey.

Topic: Bridge engineering data Construction organization design of a bridge project Construction organization design of field bridge engineering
Bridge works Construction organization design (complete)
The project is XXX. Due to the impact of long-term scouring, the revetment at both sides of the bridge bottom has been hollowed out, and the cushion cap and pile foundation of the maintenance stairs are exposed, which seriously affects the safety of the bridge foundation. In order to ensure the safety of stair handrails, it is necessary to reinforce and maintain the revetments at both sides of the bridge bottom, and reinforce the cushion caps of the maintenance stairs. The main quantities include: silt excavation, filling, steel pipe bored cast-in-place pile, mortar block material, light colored granite veneer outside the retaining wall, and light colored granite guardrail.

Topic: Construction organization design of a bridge project Bridge engineering data Bridge works agreement
Class I highway Bridge works Construction Organization Design.doc

Topic: Code for highway bridge engineering Contract for Highway and Bridge Works Ranking of Highway and Bridge Engineering
highway Bridge works Construction Organization Design (2). pdf

Topic: Code for highway bridge engineering Contract for Highway and Bridge Works Ranking of Highway and Bridge Engineering
Class I highway Bridge works Construction organization design
This project is a key project of municipal construction in XX City. Starting from XXX in the north and connecting with XX Avenue in the south, it is the import and export channel of XX Science Park. The project is designed by XX Highway Survey and Design Institute and constructed by an engineering bureau.

Topic: Code for highway bridge engineering Contract for Highway and Bridge Works Ranking of Highway and Bridge Engineering
A road in Fuzhou Bridge works Construction bidding documents
Construction of a road and bridge project in Fuzhou, including roads, bridges, drainage, water supply, pipeline integration, lighting street lamps, traffic facilities and ancillary works. A total of one lot.

Topic: Fuzhou Survey Specification Bridge engineering data Bridge project contract
A road in Hangzhou Bridge works construction plan
In the construction scheme of a road and bridge project in Hangzhou, * West Road is located in the south of Guangzhou * * Development Zone, in the Wanqingsha area of the * * delta alluvial plain, surrounded on one side by the sea, and on three sides by Jiaomen Waterway, Xiahengli Waterway, and Hongqi Waterway.

Topic: Construction scheme of road and bridge works Code for Road and Bridge Engineering Hangzhou Lighting Code
A road in Hangzhou Bridge works Bidding construction organization design (print)/
1.1.1 Project name, location, scale and duration Project name: the third bid section of civil works of * * West Road, * * Development Zone, Guangzhou. Geographic location of the project: * * West Road is located in the south of Guangzhou * * Development Zone, in the Wanqingsha area of the * * delta alluvial plain. It faces the sea on one side and is surrounded by Jiaomen Waterway, Xiahengli Waterway and Hongqi Waterway on three sides.

Topic: Hangzhou Lighting Code Construction organization design of a bridge project Hangzhou Project Cost and Construction Contract
A road in Hangzhou, Zhejiang Bridge works Bidding construction organization design scheme
The * * Road Project in Hangzhou City is located on the south bank of the Qiantang River. The line passes through two geomorphic units of different origins, namely, the Qiantang River alluvial marine geomorphic unit (al-mQ43) and the lake marsh facies sedimentary geomorphic unit (l-hQ42). Gutang Road is the dividing line. Generally, the surface has been reclaimed as farmland, nursery or residential land, and the composition is Holocene upper group loam, silt or Holocene middle group loam, sandy soil. The site is relatively flat, with some slight fluctuations.

Topic: Construction organization design of a bridge project Bridge engineering survey scheme Bridge engineering data
A road in Hangzhou Bridge works Bidding design and construction organization scheme
The construction materials for this project are purchased nearby. The main construction materials, such as steel bars and cement, are purchased from the building materials market in Guangzhou or Panyu District. The construction materials are transported to the construction site via S111 Highway (Fanzhong Highway) and * * West Road, with a transportation distance of less than 60km.

Topic: Hangzhou Lighting Code Construction organization design of a bridge project Construction scheme design of bridge works
A road in Hangzhou Bridge works Bidding construction organization design
The preparation range is from the north end to the intersection of * * Road K3+075.690, and the south end to the intersection of * * Road K3+998.130, with a total length of 0.92km. That is, the bridge, road, protection and drainage, ancillary works and pile foundation works of the Hangzhou * * Road * bid project.

Topic: Hangzhou Lighting Code Construction organization design of a bridge project Hangzhou Project Cost and Construction Contract
A road in Hangzhou Bridge works Bidding construction organization design
3. Subgrade filling and compaction require that embankment filling shall be carried out after the completion of soft soil foundation treatment construction, and embankment filling shall be sand or earth filling. Specific principles: (1) New subgrade filler: backfill cohesive soil (capping layer) 50cm below the bottom of the road trough, wrap the side slope with three woven bags of soil, of which the outermost woven bags are filled with cultivated soil, the remaining two bags are filled with cohesive soil, and the rest are filled with sand. (2) Widening filler on the left side of the old road (along the route): the side slope is wrapped with three woven bags, of which the outermost woven bag is filled with cultivated soil, the other two bags are filled with cohesive soil, and the rest is filled with soil (the widening width is less than 5 meters). If sand is filled (the widened width is more than 5m), and 50 cm below the bottom of the road trough is required to be backfilled with cohesive soil (the top layer).

Topic: Hangzhou Lighting Code Construction organization design of a bridge project Hangzhou Project Cost and Construction Contract
A road in Hangzhou Bridge works Bidding Construction Organization Design.doc

Topic: Hangzhou Lighting Code Construction organization design of a bridge project Hangzhou Project Cost and Construction Contract
A road in Hangzhou Bridge works Bidding Construction Organization Design.pdf

Topic: Hangzhou Lighting Code Construction organization design of a bridge project Hangzhou Project Cost and Construction Contract
A road in Hangzhou Bridge works Bidding construction organization design (print)
Bidding construction organization design of a road and bridge project in Hangzhou (printing) Bidding construction organization design of a road and bridge project in Hangzhou (printing) Bidding construction organization design of a road and bridge project in Hangzhou (printing) Bidding construction organization design of a road and bridge project in Hangzhou (printing)

Topic: Hangzhou Lighting Code Construction organization design of a bridge project Hangzhou Project Cost and Construction Contract
A road in Hangzhou Bridge works Bidding construction organization design (print)
The bidding construction organization design (printing) of a road and bridge project in Hangzhou is rich and detailed, and can be downloaded for reference and study by netizens.

Topic: Hangzhou Lighting Code Construction organization design of a bridge project Hangzhou Project Cost and Construction Contract
A tunnel Bridge works Bidding construction organization design scheme
This data is the bidding construction organization design scheme of a road and bridge project, which is detailed and can be used for reference.

Topic: Construction organization design of a bridge project Bridge engineering survey scheme Bridge engineering data
A road in Hangzhou Bridge works Bid construction organization design document
1. Project Location: * * Road Project in Hangzhou City is located in * * of Hangzhou City, which is a Class I urban secondary road running through * * from south to north, The total length is about 5.48km. 2. This section of the project route is bid section *, starting from the north end at the intersection of * * Road K3+075.690, and ending at the south end at the intersection of * * Road K3+998.130, with a total length of 922.44m. 3. The K3 ＋ 515.370 ～ K3 ＋ 918.060 section of bridge works is the * * River overpass with a length of 390.69m, which is divided into main bridge and approach bridge; The approach bridge on both sides adopts 4 holes (north) and 7 holes (south) 25m fabricated post tensioned prestressed concrete simply supported hollow slab beam, and the main body is a three span 31m+44m+31mV pier fabricated prestressed concrete continuous T-beam bridge; The full width of the bridge deck is 38m. 4. The road works section K3+075.690 ～ K3+515.370 and K3+918.060 ～ K3+998.130 are roads, with a length of 531.75m; The width of the red line is 50.0m from * * Road to the planned * * Road, and the rest is 44.0m. The roadways within the scope of the project are paved with asphalt concrete pavement, and the sidewalks are paved with color interlocking prefabricated sidewalk slabs. 5. The drainage project adopts the complete separation system of rain and sewage. Rainwater drainage is discharged into the nearby river by gravity, and sewage drainage is discharged into the main urban sewage pipeline.

Topic: Hangzhou Lighting Code Construction organization design of a bridge project Hangzhou Project Cost and Construction Contract
Hangzhou No. 1 Road Bridge works Bidding construction organization design
K3 ＋ 515.370 ～ K3 ＋ 918.060 section is the * * River overpass with a length of 390.69m, which is divided into main bridge and approach bridge; The approach bridge on both sides adopts 4 holes (north) and 7 holes (south) 25m fabricated post tensioned prestressed concrete simply supported hollow slab beam, and the main body is a three span 31m+44m+31mV pier fabricated prestressed concrete continuous T-beam bridge; The full width of the bridge deck is 38m.

Topic: Hangzhou Lighting Code Construction organization design of a bridge project Construction Contract for Tunnel and Bridge Works
A city Bridge works Organization design scheme
The project is located in the urban area of Jiangyin, connected with Huancheng North Road in the east and Wuxing Road in the planning in the west. The main bridge continuously spans the old Xicheng Canal, Xicheng Canal and Tongjiang Road close to the canal in the west. It is an urban bridge connecting Wuxing Road, a major east-west traffic artery in Jiangyin City. The design scope is K0+082 to Junshan Road intersection (including Junshan Road intersection). The total length of the main line is about 744m.

Topic: Municipal bridge engineering design Construction organization design of a bridge project Bridge engineering survey scheme
First class highway in a city Bridge works Organization design scheme
The starting and ending chainages of the project are K0+000 ～ K1+422.36, with a total length of 1.422km; the starting and ending chainages of the viaduct are K0+403.5 ～ K0+801.87, with a total length of 398.37m, including 300.04 bridge spans and 88.08m approach bridges. The overall structure of the bridge is a simply supported beam system, which is a straight bridge.

Topic: Code for design of highway bridge engineering Contract for Highway and Bridge Works Ranking of Highway and Bridge Engineering
A road in Hangzhou Bridge works Organization design scheme
The current situation of the project is convenient road, and there is no existing drainage system. The project adopts rainwater and sewage separate drainage system. Rainwater and sewage pipes are arranged under the green belt and sidewalk on both sides of the road in the near future.

Topic: Hangzhou Lighting Code Municipal bridge engineering design Hangzhou Lightning Protection Facilities Testing Institute
A road in Hangzhou Bridge works Bid organization design (print)
Before erecting the side formwork, apply a layer of release agent on the inside of the formwork, and then erect the formwork to the design pier height according to the set out pier column centerline and pier bottom elevation. The pier and abutment formwork is firmly supported, and wind cables are set around the pier column to pull the formwork, so as to prevent the formwork from tilting when pouring concrete. After formwork erection, retest and check to ensure that the design dimension and allowable eccentricity deviation of pier column and cap beam meet the requirements. Report to the supervising engineer for acceptance.

Topic: Hangzhou Lighting Code Hangzhou Lightning Protection Facilities Testing Institute Construction organization design of a bridge project
Class I highway Bridge works Construction organization design of
This project is a key project of municipal construction in XX City. Starting from XXX in the north and connecting with XX Avenue in the south, it is the import and export channel of XX Science Park. The project is designed by XX Highway Survey and Design Institute and constructed by an engineering bureau.

Topic: Code for highway bridge engineering Contract for Highway and Bridge Works Ranking of Highway and Bridge Engineering
A road in Hangzhou Bridge works Bidding construction design
The current situation of the project is convenient road, and there is no existing drainage system. The project adopts rainwater and sewage separate drainage system. Rainwater and sewage pipes are arranged under the green belt and sidewalk on both sides of the road in the near future.

Topic: Hangzhou Lighting Code Hangzhou Project Cost and Construction Contract Construction organization design of a bridge project
A road in Hangzhou Bridge works Bidding construction design scheme
In order to reduce the settlement and uneven settlement after the completion of the project and ensure that the bearing capacity of the foundation meets the requirements, the project adopts vacuum combined surcharge preloading method, surcharge preloading drainage consolidation method, high-pressure rotary jet grouting pile and cement mixing pile and other methods to strengthen the silt soft subgrade.

Topic: Bridge engineering survey scheme Bridge engineering data Bridge works agreement