Construction organization design of underground garage of residential building project

Uploaded on: April 4, 2018 10:55:46 come from: Construction documents / Construction organization design / Construction organization design of residential buildings

zero

3.96 points

With a floor area of 14905.45m2, 372 vehicles are parked. The total length of the basement is 223.0m and the total width is 87.5m. In addition to the parking space for vehicles, the basement is equipped with air inlet shaft, air inlet machine room, diesel generator room, power distribution room, exhaust machine room and other ancillary facilities, as well as elevators shared with G3-G8. The main structure of the basement is a full cast-in-place reinforced concrete structure, which is composed of a 400mm thick base plate, a 350mm thick external shear wall, wall columns, frame columns, a 200mm thick internal shear wall, and a 200 thick roof. The concrete strength grade: 3GAZX, 3GYZX, 3GJZX, and the wall (G3 building) concrete strength grade: C40. The wall concrete strength grade is C35, and the unspecified slab thickness is 150mm. The basement is heated and the exterior wall of the basement is insulated with 60 thick extruded board. There are 4 fire compartments in the basement. Class A waterproof doors that are closed independently are used when the firewall is opened. Automatic sprinkler is set in the underground parking garage and the front room of the residence. Fire resistant roller shutter is set at the entrance and exit of the parking garage and the lane. The fire resistance limit of the fire resistant roller shutter is>3.0h. Basement waterproofing works shall comply with the Technical Code for Basement Waterproofing (GB50108-2001). See the 0ZJ301 type drawing for the waterproof structure of the basement building. According to the use function of the basement, the waterproof grade is one. The fortification method is that the exterior wall and bottom plate of the basement are cast-in-place impermeable concrete (impermeability grade is S6), waterproof mortar and synthetic polymer coiled material, and the thickness shall not be less than 1.5mm, The method of forming a tee joint for fortification is detailed in the waterproof method and node details of the basement. Construction joints of waterproof concrete The reserved holes, corners, potholes, post cast strips and other parts of the pipes through the wall and the weak links of underground works such as deformation joints shall be treated according to the Code for Acceptance of the Quality of Underground Waterproofing Works GB50208. The basement roof is provided with a gas barrier and a polymer synthetic coiled material with thickness greater than 1.0.

Construction Organization Design for Underground Garage of Residential Building Project - Figure 1

Construction Organization Design for Underground Garage of Residential Building Project - Figure 2

Construction Organization Design for Underground Garage of Residential Building Project - Figure 3

Construction Organization Design for Underground Garage of Residential Building Project - Figure 4

Construction Organization Design for Underground Garage of Residential Building Project - Figure 5

Click to download the source file now

Special statement: This material belongs to the sharing uploaded by users Downloaded content, only for learning, not for commercial use. If there is any copyright problem, please timely contact Station delete!

Collection

WeChat code scanning and sharing

Click to share

Related recommendations

An underground garage in Nanjing engineering construction organization design
The construction organization design of an underground garage project in Nanjing includes a building area of about 1808m2 and a total building area of about 1995m2. The building is designed as an important public building, with a fire resistance rating of Grade I and a basement waterproof rating of Grade II. The basic seismic fortification intensity is 7 degrees, and the seismic grade is III. Except that the underground enclosure structure of the project is reinforced concrete structure, the design service life is 50 years, the structural safety level is Grade II, the seismic fortification classification is Class B building, and the resistance level of the basement civil air defense is Grade 7B. The building foundation adopts raft foundation, and the exterior wall plate is a 300 thick self waterproof reinforced concrete structure. The waterproof layer is set on the structural cushion and the basement exterior wall plate. Concrete columns are used for columns and composite beams are used for beams,. Concrete floor slab is adopted. Unless otherwise specified, the concrete grade of cast-in-place reinforced concrete members is C35, and the reinforcement is HPB235 and HRB335. For reference and download

Topic: Construction organization design of garage Project construction organization design Construction organization design of track garage extension project
Underground garage water heating engineering construction Organizational plan
This is the construction organization plan of Shandong Liaocheng Evergrande Mingdu Underground Garage Plumbing Project. The document is in PDF format, 93 pages in total.

Topic: Construction scheme of underground garage Project construction organization Construction organization design of underground garage housing
Underground garage of a commercial and residential building in Yixing engineering construction organization
The project is located in * * Town, Yixing City, with a total construction area of 15157.6 square meters, including 3104.9 square meters of civil air defense area, two protection units, six explosion-proof units and one fire compartment. The civil air defense is used as a garage in peacetime and as a personnel shelter in wartime. The project is classified as Class II, and the building durability is: (50 years under normal use and maintenance conditions in non war period); The fire resistance rating of the building is Grade I; The building waterproof grade is Grade II; The seismic fortification intensity is six degrees. The foundation is a reinforced concrete raft, with three layers of clay mixed with silt as the foundation bearing layer. The column is cast-in-place reinforced concrete with strength grade of C30. The strength grade of bottom plate, top plate, wall and outer column is C30, and the design impermeability grade is S6.

Topic: Jiaxing Project Construction Scheme Construction Contract of Underground Garage Project Yixing Flood Control
Construction organization design of underground garage of a residential building
This information is for the construction organization design of the underground garage of a residential building. It is detailed and accurate, and is only for reference. I hope it can help you.

Topic: Construction organization design of residential building and garage 6+1 residential building construction organization design Construction contract of underground garage
Detailed construction organization design of underground garage of a residential building
The project is an underground parking garage, and the buried depth of the foundation is -11.25m, ± 0.000 is equivalent to the absolute elevation of 47.80m. Position area control network: determine the site area control network through the site location points described in the general layout, and set it as the cross main axis.

Topic: Construction organization design of residential building and garage 6+1 residential building construction organization design Thesis on construction organization design of a residential building
Electrical installation of residential building and underground garage engineering construction group
The power supply for transformation, distribution and distribution is introduced from the nearby local substation with five circuits of power supply. The cross-linked plastic cable is buried and introduced into the π connection room on the ground floor. The lighting system is divided into emergency lighting and general lighting, of which emergency lighting is equipped with centralized battery distribution box; The lighting power distribution adopts the trunk type power distribution, and the lighting branch adopts polyethylene insulated wires that are laid in a concealed manner through galvanized steel pipes. The power system from the distribution room on the first floor underground to the roof adopts cross-linked cables, which are laid along the cable bridge along the central corridor on the first floor underground, and then laid along the strong and weak current shafts of each unit through galvanized steel pipes. The lightning protection grounding system uses the building foundation as the natural grounding body, and the four main reinforcements of the building structure foundation beam as the grounding body are reliably welded into the electrical path. The building is equipotential connected. All metal pipes, electrical equipment, distribution boxes, weak current boxes, etc. entering and leaving the building are connected to the grounding device. The toilet is equipotential connected locally. The telephone cable of the telephone system adopts the handover wiring mode. A niche type telephone junction box is set in the strong and weak power distribution rooms on every third floor, and two pairs of telephone lines enter each household. The television system is connected to the weak current room on the ground floor by the municipal cable television signal optical cable through the distribution shaft in front of the building. Each strong and weak current room on each floor is equipped with a television distribution box, and each household is equipped with an incoming line. Each household is equipped with two user terminals through the two distributors in the weak current box. Visual intercom An outdoor camera intercom is set at the gate of the building, an electric lock is set on the gate, and an indoor visual intercom is set for each household

Topic: Residential Building Installation Works Contract Construction Scheme for Installation Works of Residential Buildings Construction scheme for installation of underground garage
Detailed Rules for Safety Supervision of Residential Building and Underground Garage Project
This project is a new project, located in XXXXX, north of XXXX. The project name is XXXX. XX mansion (one group) 14 #, 13 #, 15 #, 20 # residential building and underground garage project. The residential building structure is reinforced concrete shear wall structure, and the underground garage structure is frame structure. The total building area of 14 # residential building is 10098.26 ㎡, including 559.46 ㎡ of the first underground floor, 9538.8 ㎡ of the above ground residential building. The number of building floors: 18 floors above the ground, 2 floors underground, The building height is 52.8m. 13 # residence has 11 floors, 18 floors locally, with a total building area of 10642.55 ㎡ and a building height of 52.8 m, including 710.39 ㎡ for the underground floor and 9931.62 ㎡ for the aboveground residence. The 20 # residential building has 11 floors and 18 floors locally, with a total construction area of 10497.58 m2 and a total height of 52.8 m, including 713.74 m2 of the underground floor and 9783.84 m2 of the above ground residential buildings. The 15 # residential building has 10 floors in total, with a total building area of 4858.232 ㎡, a total building height of 29.6m, a building base area of 456.422 ㎡, a basement of 429.88 ㎡, and a residential area of 4428.352 ㎡. The total construction area of the underground garage is 31555.06 ㎡, with one underground floor and 4.2m building height. The external wall insulation board of 15 # residential building is 70 thick polystyrene board, and the remaining external wall insulation layer is 65 thick polystyrene board. The roof insulation of the residential building is made of 60 thick extruded board, and the roof waterproof grade is Grade II with two layers of waterproof. Each unit of the residential building of this building is a fire compartment, and the basement is two fire compartments. There are 785 underground parking spaces in the underground garage. The fire protection classification is Class I, and the fire resistance rating is Class I. The first floor underground includes eight fire compartments, each of which has an area of no more than 4000 square meters

Topic: Safety Supervision Rules Does the detailed safety supervision rules include pile foundation Detailed rules for construction supervision
Detailed Rules for Construction Supervision of Residential Building and Underground Garage Project
Changchun Vanke Yangpu Garden Phase 2.2 6 #. 7 #. 9 # Building and 2 # Underground Garage Project is located to the west of Dongqi Road, north of Wuhan Road, south of Hefei Road, and east of Yangpu Street, with a total construction area of 29981.45 square meters, of which the total residential area is 18754.17 square meters, the total number of building floors is 14, and the building height is 45.425 meters. The structure type is frame supported shear wall structure. The seismic fortification and anti cracking degree shall be 7 degrees. The design service life of the building structure is divided into three categories, and the service life is 50 years.

Topic: Detailed rules for construction supervision Model of Supervision Rules Safety Supervision Rules
[Hebei] Supervision planning of residential building and underground garage project
（1） Project name: Building C1-C3 #, xx Jiayuan Community. （2） . Construction site of the project: the project is located in the north of Taihang Road and west of Chaoyang South Street in xx City. （3） Engineering and hydrogeological conditions: according to the geotechnical investigation report, the natural foundation cannot meet the requirements of settlement and bearing capacity, so foundation treatment must be carried out to strengthen the bearing stratum, and CFG pile composite foundation shall be used. After treatment, the foundation bearing capacity fspk=380Kpa. （4） Architectural design: this project is the C1-C3 # building of xx Jiayuan Residential Community developed by xx Bochuang Real Estate Development Co., Ltd. Among them, C-1 # building has 26 floors above the ground and 1 floor below the ground. The basement is a bicycle garage, the first floor and the second floor are commercial outlets, and the third floor and above are ordinary residences. The height of the house is 74.02 meters, and the building area is 20191.46 square meters, including 19429.98 square meters above the ground and 761.48 square meters below the ground. The building has a service life of 50 years. The building is classified as Class I residential building. The fire resistance rating of the building is Class I, the building design rating is Class I, the seismic fortification intensity is 7 degrees, and the structure type is reinforced concrete shear wall structure.

Topic: Control points of residential building construction supervision Construction organization design of residential building and garage Construction organization design of underground garage housing
Working scheme and measures of a residential building and underground garage project
S/N Item Content 1 Building Functions Residential Building and Garage 2 Building Features Super high-rise building with complex facade 3 Total building area (m2) 110000 floor area (m2) Underground area (m2) 22911 Ground area (m2) 8650 Standard floor building area (m2) Unit B: 456.5; Unit C: 462.5 4 building floors, 33 floors of 12 # building above the ground; 32 floors of 9/10/11 # building; Building # 13, 24 floors, 2 floors underground, 5 floors underground, floor height (m), 2 floors underground, residential storage room 3.15+2.85, garage, 1 floor underground, 3.8 meters above ground, floor height (m), 9 #, 11 #, 12 # residential buildings on the first floor, 2.95; 10#4.5+3.6； 13 # 3.9 Standard floor 2.95 Jump floor 2.95 Machine room equipment floor 4.55 6 Building height ± 0.00 elevation (m) Indoor and outdoor height difference (m) Base elevation (m) -10.850 (garage - 9.4) Maximum foundation pit depth (m) - 13.7 Cornice height (m) Total building height (m) 9 # building 95.05, 10 # building 98.95, 11 # building 96.65, 12 # building 98.05, 13 # building plan horizontal axis number vertical axis number horizontal axis distance (m) Longitudinal axis distance (m) 8 Building fire protection building fire protection classification I, fire resistance rating I 9 Building energy-saving exterior wall: 45mm thick wj composite insulation board; Roof: 80mm thick extruded polystyrene board; The inverted roof is 100 thick extruded polystyrene board 10. The exterior wall is decorated with real stone paint, the exterior window of the dry hanging stone door and window project is aluminum alloy hollow glass, the steel fire door roof project is not accessible. The roof is accessible. The main entrance of the roof is steel door 11. Interior decoration ceiling: putty (waterless room); Coating (public part); Clean water (kitchen, toilet) floor, cement mortar floor, floor (floor tile in public part), interior wall putty: balcony, indoor waterproof room; Others: cement mortar door and window works, the door is steel Grade A fireproof door, staircase on floors 1-3: floor tile floor, others are cement mortar floor, and the wall is inorganic paint. Construction of floor and wall of common lobby, corridor, front room, etc. Cement mortar basement floor: fine aggregate concrete, cement mortar floor wall: waterproof mortar wall ceiling: 40 thick SPR mineral spraying insulation, finishing paint spraying ramp: fine aggregate concrete

Topic: Garage underground construction scheme template Cost of underground garage Flood control of underground garage
Bidding Document for 1 # and 3 # High rise Residential Buildings and Underground Garage Project
Bidding document of a high-rise 1 # and 3 # residential building and underground garage project in word format

Topic: Bidding documents for residential building construction Construction Scheme for Basement of High rise Residential Building Construction process of high-rise residential building
Bidding Document for 5 #, 7 # Residential Buildings and 3 # Underground Garage Project of a Garden
Bidding documents for 5 #, 7 # residential buildings and 3 # underground garage of a garden in WORD format.

Topic: Bidding documents for residential building construction Basis for preparation of bidding documents Fire protection design document of multi-storey residential building
Construction organization design for electrical installation of a residential and underground garage project
Building area: 18370.44m2; floor area: 1375.7m2; underground area: 1217.97m2; overground area: 17152.47m2; building purpose: residential elevators; 4 passenger elevators, etc., for reference.

Topic: Construction scheme for electrical installation of underground garage Construction organization design of underground garage housing Construction organization design of garage
Construction organization design for electrical installation of residential and underground garage engineering
(1) When embedding the floor pipe, measure and set out in advance and bend the shaped elbow (not less than 6-10 times of the pipe diameter), thread the thread, and make marks so that it can be used to dredge the pipe box in the future. (2) As the floor piping and civil works belong to cross construction (when the formwork is completed, measure and draw the position, and after the bottom reinforcement is completed, lay the conduit), the concealed acceptance and inspection lot must be handled in time. (3) Fixing method of reserved floor pipe: the pipe can be bound to the steel bar with iron wire, the pipe laying construction is completed when the upper steel bar is bound by civil engineering, and personnel shall be sent to monitor the civil engineering vibration of concrete to avoid artificial separation and dislocation. (4) The wall body piping is mainly for the embedded configuration of switch boxes, socket boxes, distribution boxes, etc. During the piping process, the accuracy of the pipe box elevation is emphasized, and the elevation position of each pipe box is measured. After positioning, the pipe box is embedded in advance, and fixed with a cross frame. Personnel are assigned to watch the civil construction to avoid half light and half darkness or prevent the pipe from being manually detached. It is forbidden to spot weld the main civil reinforcement when fixing the pipe box. (5) The concealed pipe enters the switch box, lamp box and junction box. After the locking nut is fixed, the screw thread is 5mm above the box wall (2-4 threads). When the pipe length is more than 45 m, there is no bend: when the pipe length is more than 30 m, there is one bend; When the pipe length is more than 20m, there are two bends; When the pipe length is more than 12m and there are three bends and vertical laying, every 30m, a wire holder or a junction box must be installed. (6) The pipe orifice of the laid pipe shall be leveled, scraped and protected, and the threaded connection pipe shall be grounded across. (7) The pipeline is connected with a screw thread, the center of the screw thread is aligned with the butt joint of the two pipe orifices, and a 4mm2 soft copper wire is used at both ends for bridging. Tin the two ends of the jumper wire, and weld the wire nose with one end of the junction box jumper. The jumper wire is required to be firm and reliable.

Topic: Construction organization design of underground garage housing Construction scheme for electrical installation of underground garage Construction scheme for installation of underground garage
Construction organization design for electrical installation of a residential and underground garage project;
The grid shall meet the design requirements, and the internal equipment components shall be complete. The sign color of the panel analog bus shall be correct and clear, and the primary wiring shall be marked with the circuit name. 7) The control cables in the incoming cabinet shall be arranged neatly to avoid

Topic: Construction scheme for electrical installation of underground garage Construction organization design of underground garage housing Construction organization design of garage
Construction organization design for electrical installation of a residential and underground garage project/
1.1 Bidding Document * * * Bidding Document for Construction of Residential and Underground Garage Works. 1.2 Design overview 1.3 Main atlas

Topic: Construction scheme for electrical installation of underground garage Construction organization design of underground garage housing Construction organization design of garage
Construction organization design for electrical installation of a residential and underground garage project/
1.1 Bidding Document * * * Bidding Document for Construction of Residential and Underground Garage Works. 1.2 Design overview 1.3 Main atlas

Topic: Construction scheme for electrical installation of underground garage Construction organization design of underground garage housing Construction organization design of garage
[Heilongjiang] Underground garage of residential building project engineering construction organization design
The building area of this floor is 14905.45m2, 372 vehicles are parked, and the total length of the basement is 223.0m, and the total width is 87.5m. In addition to the parking space for vehicles, the basement is equipped with air inlet shaft, air inlet machine room, diesel generator room, power distribution room, exhaust fan room and other ancillary facilities, as well as elevators shared with G3-G8. The main structure of the basement is a full cast-in-place reinforced concrete structure, which is composed of a 400mm thick base plate, a 350mm thick external shear wall, wall columns, frame columns, a 200mm thick internal shear wall, and a 200 thick roof. The concrete strength grade: 3GAZX, 3GYZX, 3GJZX, and the wall (G3 building) concrete strength grade: C40. The wall concrete strength grade is C35, and the unspecified slab thickness is 150mm.

Topic: Heilongjiang Project Construction Contract Heilongjiang Cost Heilongjiang winter construction
Construction organization for electrical installation of 14 storey residential building and underground garage project
The construction area of the project is about 18370.44 square meters, the floor area is about 1375.7 square meters, the underground area is about 1217.97 square meters, and the ground area is about 17152.47 square meters. (1) When embedding the floor pipe, measure and set out in advance and bend the shaped elbow (not less than 6-10 times of the pipe diameter), thread the thread, and make marks so that it can be used to dredge the pipe box in the future. (2) As the floor piping and civil works belong to cross construction (when the formwork is completed, measure and draw the position, and after the bottom reinforcement is completed, lay the conduit), the concealed acceptance and inspection lot must be handled in time. (3) Fixing method of reserved floor pipe: the pipe can be bound to the steel bar with iron wire, the pipe laying construction is completed when the upper steel bar is bound by civil engineering, and personnel shall be sent to monitor the civil engineering vibration of concrete to avoid artificial separation and dislocation. This document is the construction organization design for the electrical installation of the 14 storey residential building and underground garage project, a total of 26 pages.

Topic: Construction Organization Design of Four storey Residential Building Design of indoor fire corridor on the 14th floor Construction drawing of fourth floor residential building
Construction organization design of underground garage of a project
This project is a seamless construction of super long reinforced concrete. Set expansion reinforcing band for the bottom plate and floor slab, and pour concrete continuously; The side wall shall be provided with post poured reinforcing strip, and CEA-B expansion concrete shall be used for pouring 14 days later.

Topic: Garage construction organization design Construction contract of underground garage Garage construction contract
Detailed construction organization design of underground garage project
The underground garage project of a Xinyuan bid section II is located in Donggou Town, Pudong New Area. The basement of the Xinyuan project has a floor area of 3750 square meters, on the south side of buildings 14 #, 15 # and 16 #, on the west side of the completed community, and on the east side of the steel-making creek.

Topic: Construction organization design of underground garage housing Garage underground construction contract Underground foundation construction organization design
Civil air defense of underground garage in a residential area in Wuhan engineering construction organization design
This construction organization design is one of our bidding documents for the underground garage civil air defense project of * * * * University * * residential quarter: this construction organization design reflects our overall idea and deployment for the construction of this project. If our company is lucky to win the bid, we will follow our technical management procedures, after the joint review of drawings, in accordance with the principles determined in the construction organization design, Prepare detailed single construction scheme design to guide the construction and ensure that the project is completed with high quality and speed.

Topic: Construction Scheme of Underground Civil Air Defense Garage Code for construction organization design of underground civil air defense engineering Code for underground civil air defense engineering
General contracting of high-rise residential buildings and underground garages engineering construction organization design
There are 12 single buildings in total, with 24~32 floors, mainly residential buildings, including 18 # building with residential supporting facilities and commercial podium, 42 # building with residential supporting facilities under the residential building, single storey basement garage and some ground ancillary buildings (substations, etc.), the floor area of the building is 145146m2, the floor area of the building is 10431.88m2, the underground garage area is 44498.00m2, and the total floor area is 195031.11m2

Topic: Construction organization design of underground garage housing Construction Contract of Underground Garage Project Construction organization design of a high-rise residential project
Yuejialou Railway Residence 39 # Underground Garage engineering construction organization design
3) Quality requirements: the plastering surface shall be free of cracks, hollows and other defects. The surface is smooth and clean, and the joint is flat without missing edges or corners. The measured allowable deviation shall be controlled according to the advanced plastering standard. Due to the aerated concrete block of the internal masonry structure of the project, if the surface plastering operation is improper, it will produce hollowing and cracks. In order to prevent cracks and hollowing, YH-2 concrete and mortar surface crack inhibitor is used. The specific operation method is as follows: before plastering, water the base course to wet it, wash off the floating plaster, and then plaster the bottom plaster. After the bottom plaster is rubbed flat, when there is no open water, spray YH-2 concrete and mortar surface anti crack agent in time before cracks appear, which can prevent cracks and hollowing. After the surface plaster is completed, spray it again, so that the construction is convenient, the cost can be reduced, and the project quality can be greatly improved. The thickness of each layer of plastering is 5-7 mm, and the thickness of the surface layer after leveling and compaction is generally not more than 3 mm. The internal and external corners of the indoor plastered wall and the door opening should be square. The door opening should be plastered with 1:2 cement mortar to form the corner protection. The height of the corner protection is 2 m, and the width of each side is 50 mm. The plastering should be flat, free of cracks, bubbles, and uneven joints. The internal and external corners shall be square and the gray lines shall be clear and straight.

Topic: Construction Scheme of Railway Underground Works Summary of underground engineering construction Construction contract of underground works
Organization design of a Xinyuan underground garage project
The organization design of the project is prepared in strict accordance with the principles of construction organization design and based on the documents listed below.

Topic: Construction organization design of underground garage housing Cost of underground garage Flood control of underground garage
Electrical installation of a residential and underground garage project
This building is a Class II building, which adopts the regional alarm mode, and the alarm and linkage control are all through the bus system; The relay control line of the fire hydrant pump start button and positive pressure blower start button in this building is led to the fire control center of the community through the fire equipment junction box in the strong and weak current rooms on the first floor.

Topic: Construction scheme for electrical installation of underground garage Cost of underground garage Flood control of underground garage
Basement civil air defense engineering construction Organization
Basement civil air defense project construction organization is prepared according to project overview construction schedule

Topic: Construction of civil air defense works in basement Basement civil air defense construction organization design Code for construction organization design of underground civil air defense engineering
Underground garage of a commercial and residential building in Yixing engineering construction organization design
The highway slope is widely distributed along the highway and has a large damage range to the natural environment. If the protection can be carried out while paying attention to the protection and creation of the environment and adopting appropriate greening protection methods, the highway will be safe, comfortable, beautiful, coordinated with the environment and other characteristics, and will also produce considerable economic, social and ecological benefits.

Topic: Construction organization design of underground garage housing Construction Contract of Underground Garage Project Yixing Flood Control
Underground garage of a commercial and residential building in Yixing engineering construction organization design
Under the auspices of the technical director of the project, organize the construction, technical and quality budget management personnel to carefully study the contract content, construction drawings, construction specifications, operating procedures, as well as several provisions on the quality of the superior and local authorities and other document requirements, and hold a joint review meeting for the disclosure of construction drawings as soon as possible.

Topic: Construction organization design of underground garage housing Construction Contract of Underground Garage Project Yixing Flood Control
Meicheng underground garage engineering construction Organization design scheme
The electrical system of the project includes power lighting, grounding system and weak current system. The power supply of the building is introduced from the distribution room in the basement, and the power supply voltage is 380/220V three-phase four wire system.

Topic: Construction scheme of underground works Underground engineering survey Code for construction and acceptance of municipal underground works
Underground garage of a city square engineering construction organization design
The site traffic is convenient, close to the road, reaching three supplies and one leveling, meeting the construction conditions. However, it is located in the center of the city and a prosperous area. During the construction, safety protection, environmental protection, noise and dust control, city appearance and sanitation, civilized construction and other requirements are very strict. During the construction, the safety of pedestrians around and the rest, life and work of residents should be ensured.

Topic: Summary of underground engineering construction Underground engineering survey Construction scheme design of underground works
Underground garage engineering construction Organization Design Scheme.doc

Topic: Construction scheme of underground works Underground engineering survey Code for construction and acceptance of municipal underground works
Residential building and corresponding underground garage project and gate of a residential quarter in a city engineering construction organization design
The project is a shear wall structure, with 18 floors above the ground and 2 floors below the ground. The total building area is 18940 square meters, and the building height is 53.4 meters. The design scale is a medium-sized residential building, and the building type is high-rise residential building.

Topic: Construction organization design of community gate Construction organization design of underground garage housing Construction organization design of garage
Civil air defense of residential underground garage engineering construction programme
There are two floors in the basement, and the first floor is a parking garage, with a floor height of 3.9m; The second underground floor is the basement of civil air defense combined with peacetime and wartime, and it is the equipment room and warehouse at peacetime, with the floor height of 5.0m; The first floor above the ground is 4.8m high, and the second floor to the nineteenth floor is 3.9m high; The 20th floor is 4.8m high. The design building area of the project is 28663 square meters, including 24610 square meters above the ground and 4053 square meters underground. The building covers an area of 2105 square meters.

Topic: Construction scheme for civil air defense works of underground garage Concrete construction scheme for underground garage Construction Contract for Underground Garage Reconstruction Project
Construction organization design for electrical installation of 14 storey residential building and underground garage project
The construction area of the project is about 18370.44 square meters, the floor area is about 1375.7 square meters, the underground area is about 1217.97 square meters, and the ground area is about 17152.47 square meters. This document is the construction organization design for the electrical installation of the 14 storey residential building and underground garage project, a total of 30 pages.

Topic: Construction Organization Design of Four storey Residential Building Design of indoor fire corridor on the 14th floor Construction organization design of underground garage housing
Electrical construction organization design of residential building and underground garage Phase II
The project consists of XXX buildings 1 #, 2 #, 3 #, 4 #, 5 #, 6 # and underground garage. The main structure is reinforced concrete frame supported shear wall structure, which belongs to a class I high-rise residential building with an area of about 99000 square meters above the ground, 24958 square meters underground garage, 6570 square meters bicycle garage, and 3373 square meters civil air defense.

Topic: Electrical construction organization design of residential buildings Construction organization design of underground garage housing Construction organization of multi-storey residential buildings
Water supply and drainage design drawing of underground garage project of a residential building
This data is the water supply and drainage design drawing of the underground garage project of a residential building, which includes: water supply, drainage, hydrant water supply pipeline and fire extinguisher configuration plan, automatic sprinkler water supply pipeline plan, automatic sprinkler water supply pipeline system diagram, etc. The contents are detailed and can be used for reference

Topic: Drainage of underground garage Design drawing of underground garage Underground garage works
Bidding Document for Fire Protection Project of Residential Building and Underground Garage
XX Real Estate Development Co., Ltd. conducted public bidding for fire protection works of 1-3 # buildings and underground garages in XX residential quarter. According to the relevant provisions of the Group Company on subcontracting of individual projects and XX Company's Engineering Subcontracting Management Measures, after public registration and qualification review, we agree that your company will participate in the bidding, and please prepare the bidding documents according to the requirements of the bidding documents and come to the bidding on time.

Topic: Bidding documents for residential building construction Residential Building Fire Engineering Contract Optimization design of fire protection engineering for residential buildings
Supervision planning of commercial buildings, residential buildings and underground garages
The total construction area of the project is 189481m2, consisting of six high-rise buildings, underground garages, commercial buildings, kindergartens and other frame structures, with a total height of 130.90m.

Topic: Fire protection design of commercial building Construction organization design of commercial residential buildings Control points of residential building construction supervision
Bidding Document for 2 # Residential Building and Underground Garage Project of a Company
Bidding document of a company's 2 # residential building and underground garage project in word format

Topic: Bidding documents for residential building construction Basis for preparation of bidding documents Bidding of cost company