Construction organization design scheme of road construction project in hilly and mausoleum area

Uploaded on: 2018-08-16 09:14:02 come from: Road and bridge municipal administration / Road and bridge works / traffic engineering

zero

4.94 points

This data is the construction organization design scheme for road construction in mountainous and hilly areas. The content of the data is clear and can be used for reference. Welcome to download it.

Construction Organization Design Scheme of Road Construction Project in Hilly Cemetery - Figure 1

Construction Organization Design Scheme of Road Construction Project in Hilly Mausoleum Area - Figure 2

Construction organization design scheme of road construction project in hilly and mausoleum area - Figure 3

Construction Organization Design Scheme of Road Construction Project in Hilly Cemetery - Figure 4

Construction Organization Design Scheme of Road Construction Project in Hilly Mausoleum Area - Figure 5

Click to download the source file now

Special statement: This material belongs to the sharing uploaded by users Downloaded content, only for learning, not for commercial use. If there is any copyright problem, please timely contact Station delete!

Collection

WeChat code scanning and sharing

Click to share

Related recommendations

Construction organization of a road project design scheme
1、 The preparation description is based on the spirit of the pre bid meeting and the Q&A meeting of the construction unit and the site survey, combined with the experience accumulated by our company in the construction of roads, municipal roads and other similar municipal projects over the years, and based on our company's comprehensive level of construction, technology, mechanical equipment and management, etc., if we win the bid, we will follow the contract requirements on this basis, Further prepare detailed implementation construction organization design in accordance with design documents, technical specifications and standards, and carry out construction in strict accordance with the approved construction organization design to ensure project implementation.

Topic: Construction organization design scheme of road works Construction scheme of a certain road project Summary of road engineering construction
Construction organization design of a road project in Chengnan New Area

Description This project is a municipal road project. The road adopts 2m sidewalk+14m carriageway+4m sidewalk, and the cross slope of the carriageway is 1.5%. The straight arch is adopted, and the cross slope of the sidewalk is 1.5%. 1. Subgrade of concrete pavement works: miscellaneous fill of the original road shall be replaced with uniform sand; Base course: 40cm thick sand gravel subbase; Water stabilized layer: 15cm thick cement stabilized macadam base; Pavement: 20cm thick fcm4.5Mpa concrete surface. 2. The construction method of sidewalk works is as follows: a. Ramming of plain soil; b. 15cm thick sand gravel layer; c. 6cm thick cast-in-place concrete cushion; d、 The sidewalk is made of colored terrazzo sidewalk bricks (the blind road is 60cm wide). 3. The rainwater and sewage separation system is adopted in the drainage pipeline project. The drainage pipes are reinforced concrete pipes, and the socket type interfaces are detailed in 04S516-21. The pipe top is butt jointed. The sewage pipe foundation is detailed in 04S516-21. The inspection well is detailed in S02S515-21 No. A. The distance between the inspection wells not marked is 40 meters. 　　

Topic: Road engineering construction design General plan of Fuyang Chengnan New Area Chengnan Villa
Construction organization design of a road project in Dongying City
Yizhou Road starts from Putuoshan Road in the north and ends at Beiyi Road in the south. It is an urban secondary trunk road with a total length of 587.925m and a planned red line width of 27m. Asphalt concrete pavement structure is adopted for the carriageway; The sidewalk is paved with colored environment-friendly walking bricks; Granite curbs are used as curbs, and C30 concrete precast blocks are used as side flat stones. 1500 and 1800 reinforced concrete circular pipe drainage systems are set on both sides of the road, d400PHDE sewage pipeline is set on the east side, and street lighting is set on both sides. The driving speed is 40KM/h, and the design life is 15a when the road traffic volume reaches the saturation state

Topic: Road engineering construction organization design Regulations of Dongying City on Change of Project Amount Summary of road engineering construction
Road engineering construction organization design scheme
This data is the construction organization design scheme of road engineering (municipal, including the catalog and detailed description, complete in content, with reference value, and can be downloaded for use.

Topic: Construction organization design scheme of road works Construction scheme of a certain road project Summary of road engineering construction
Construction organization scheme design of a road project
The first ring road of a city is located at the edge of the planned urban area of a city, mainly connecting ten edge groups, namely Beiyuan, Jiuxianqiao, Dongba, Dingfuzhuang, Fatou, Nanyuan, Fengtai, Shijingshan, Xiyuan and Qinghe Town, with a total length of 93km. This project, the first ring road of a city (Badaling Expressway Airport Road) project is a part of it. The project starts at the west side of Badaling Expressway, passes Beiyuan Road, and ends at the intersection of Capital Airport Expressway, with a total length of 12.34km. The Project is divided into Section A (Badaling Expressway - Beiyuan Road); Section B (Beiyuan Road Airport Road), the bidding section of Section B is 4-6 contract section, and the B6 contract section (K6+950 ～ K7+850) is 900 meters long, which is part of Section B. The whole line is designed according to the standard of fully enclosed and fully overpass expressway. The road is in the form of one ring road and two roads, with the general subgrade width of 35.00m, of which the central separation width is 3m, the pavement width on each side is 15.25m (the left marginal strip is 0.75m+3 × 3.75 lane width+3.25 hard shoulder), and the earth shoulder on each side is 0.75m. The width of the exit surface of the two lane acceleration and deceleration lane is 22.75m (0.75 m+3 × 3.75 lane width+0.5+2 × 3.5 acceleration and deceleration lane+3.25 hard shoulder on the left side of the curb), concrete slope curbs are set on both sides of the road surface, and corrugated beam crash barriers are set on the earth shoulder and on both sides of the median. The line passes through Beixiaohe and Wangjinggou, which are respectively equipped with Beixiaohe River Crossing Bridge and Wangjinggou 1 # and 2 # bridges. The main road terminal K7+850 connects with Jingshun Road. The design uses Z1 ramp and Z5 ramp to connect with the airport expressway, so that the project can be put into operation immediately after completion. The completion of the project will play a positive and important role in bidding for the 2008 Olympic Games, realizing the slogan of "New Beijing, New Olympics" and promoting the economic development of a city.

Topic: Construction organization scheme of road works Construction scheme design of highway engineering Construction scheme design of a highway project
Construction organization scheme for Phase II road works
The construction organization design includes the project organization and management, institutional setting, construction deployment, general layout and management, construction objectives, manpower and machinery allocation, construction scheme and methods of major projects, quality, safety and civilized construction, and other organization and management measures for the whole process from commencement to completion. The scope only includes self completed projects, The project content of the designated subcontracting part is not covered.

Topic: Construction organization scheme of road works Phase II road construction scheme Summary of road engineering construction
80 CAD construction drawings of urban branch roads in hilly areas of Changsha City (including drainage, lighting, traffic and greening)

Directory: Road engineering 22 sheets: The latest topographic map Geographical location schematic diagram Straight curve corner table Road pile by pile coordinate table Road plane design drawing Longitudinal slope Vertical curve table Road profile drawing Road standard cross section drawing Road pile by pile land and coordinate table Road map General subgrade cross section design drawing Earthwork quantity table Earthwork cross section design drawing Subgrade design table Special subgrade treatment Bill of Quantities Pond Treatment Plan Design Drawing Special Subgrade Treatment Design Drawing Filling and Excavation Junction Treatment Bill of Quantities Filling and Excavation Junction Treatment Design Drawing Slope Protection Quantity Table Slope Protection Design Drawing Side Ditch Engineering Quantity Table Side Ditch Design Drawing Pavement Engineering Quantity Table Pavement Structure Design Drawing New and Old Pavement Connection Engineering Quantity Table New and Old Pavement Connection Design Drawing Intersection Channelization Design Drawing Vertical Design Drawing of Intersection (Contour Line) Vertical Design Drawing of Intersection (Square Grid) Barrier free Facilities Design Drawing Detail Drawing of Sidewalk Pavement

Topic: Urban branch road Structural design of buildings in changsha Traffic greening
[Guangxi] As built drawing of 7X32m whole hole prefabricated and erected simply supported box girder double track bridge in a mountainous and hilly area
This document is the as built drawing of a 7X32m long simply supported box girder double track bridge prefabricated and erected in a mountainous and hilly area in Guangxi. The bridge is located on a curve. Double track bridge, jointless track, distance between tracks is 4.6m. Total length of the bridge: 243.66m, span arrangement: 7X32m whole hole prefabricated and erected simply supported box girder. The whole bridge pier and abutment are equipped with hanging baskets. Pay attention to the embedding of relevant embedded parts, and the bored pile foundation. The drawings include prestressed reinforcement layout, beam reinforcement quantity table, beam anchor sealing structural drawing, lifting point layout detail, support plate structure and support installation schematic diagram, ballast retaining wall structure and reinforcement layout, cable trough vertical wall, cover plate, shutter layout, etc. The contents are comprehensive and detailed, which can be used for your reference.

Topic: Precast box girder As built drawing Design of simply supported roof truss
Construction organization design of a road project and its supporting projects
The construction of this pavement project needs to be excavated and then constructed as a new pavement. Segmentation of pavement plates: dowel bar reinforcement shall be set at the expansion joint and tensile bar reinforcement shall be set at the longitudinal joint according to the dimensions shown in the drawing. It is considered to set up temporary facilities along the project line to reduce the non labor operation time of construction personnel to and from the construction site.

Topic: Construction scheme of road supporting works Construction contract of supporting works Supporting project contract
Road construction organization design of a community in Ningbo
This document is the construction organization design of a community road project in Ningbo City. The water supply pipeline is made of nodular cast iron pipe with a diameter of DN300, which is located at the north side of the road about 3.8m away from the road centerline. The project includes roads 9m wide (about 180m long) outside the community, roads in the community (about 1900m2), rain and sewage pipelines outside the community and in the community, water supply pipelines and traffic facilities of roads outside the community. The design is accurate and the content is detailed, which is worth downloading.

Topic: Road engineering construction organization design Construction Scheme of Ningbo Road Project Construction Contract of Community Road Works
Specific construction organization of road works design scheme
Learning, reasonable and feasible construction schedule network diagram, adopting "FIDIC" network management system, carefully organizing construction, reasonably arranging the construction period, and completing the contract construction tasks in a high-quality, efficient, safe and civilized manner, to give a satisfactory answer to the infrastructure construction of xx New Area

Topic: Specific construction scheme of road works Road construction organization design scheme Construction organization design scheme of municipal road engineering
Construction organization of road works in a certain area design scheme
Traffic safety facilities are set within the scope of the project. Municipal pipeline works include water supply and drainage works, power, telecommunications, lighting works and landscaping works.

Topic: Construction organization design scheme of road works Construction scheme of a certain road project Summary of road engineering construction
Construction organization design of a new urban road project
The stake number of the project is AK0+012-AK0+265, the total length of the road is 0.253km, and an intersection is set along the whole line, the intersection of Dongding Road and Zhanguan Road. One 3 * 10m simply supported slab girder bridge is set along the whole line. The first bid section of the new project mainly includes road works, bridge works and pipeline works.

Topic: Road engineering construction organization design Construction scheme of new road works Construction scheme of a municipal road project
Construction organization design of a road project in Wuhan, Hubei

Construction organization design of a road project in Wuhan, Hubei
Construction Organization Design of Huai'an Road West Extension Project

A very good municipal engineering construction organization design
Construction Organization Design of a Road Diversion Project
This road project is located in the third electrolysis area of xxxx electrolysis area. As the road surface has been rolled by process vehicles and carts for a long time, cracks and pits have appeared on the surface, many well seats have collapsed seriously, and the road teeth are incomplete, bringing hidden dangers to the safe operation of vehicles. This project mainly involves the reconstruction of the pavement. The main works include the overall reconstruction of 1914.9 m2 of pavement, 1002.4 m2 of sidewalk, 135m of domestic drainage pipeline and 634.2m of granite installation.

Topic: Road engineering construction organization design Summary of road engineering construction Road construction contract
Construction organization design of urban road engineering
This section of the project belongs to the section of the East Ring Expressway of ×× City, which is located in the northeast of the urban area. The design mileage mileage is from KXX+830 to KXX+230 and from KXX+360 to KXX+560, with a total length of 630 m. The East Ring Expressway is the only freight trunk road connecting the North Ring Expressway of ×× City and ×× Ferry Port. The project is a municipal project of the nature of reconstruction and widening of the existing ×× road. The original pavement is a two-way six lane concrete structure, and its standard cross section is shown in the figure. The widened center line of Nigang Road is basically consistent with the original center line of the road. Both sides are widened, and the standard cross section is shown in the figure.

Topic: Construction organization design of urban road engineering Special construction scheme for urban road works Construction scheme for urban road engineering protection
Road engineering construction organization design scheme (Municipal)
After receiving the order to commence, the mechanical equipment to be put into the project will be mobilized according to the construction sequence of the single project, the quantities and the construction schedule. Crawler type construction machinery will be transported by trailer. See the attached table below for the specific equipment input into the project.

Topic: Construction organization design scheme of road works Construction scheme of municipal bridge and road works Construction scheme of municipal pipeline road works
Construction organization design of road works in the new area
The project has many single projects and short construction period. In order to speed up the construction progress, the project is divided into three construction areas. The single works used shall be constructed in parallel at the same time, and each single project shall be operated in a flow process in sections.

Topic: Road engineering construction organization design Summary of road engineering construction Road construction contract
Construction Organization Design of Road Engineering in Dongshan Reconstruction Community
Chunhui Road is one of the trunk roads of the road system in Zhoushi Town, Kunshan City. After completion, the roads in the north area of Kunshan City will play an important role in the entire road network.

Topic: Road engineering construction organization design Construction Contract of Community Road Works Construction Scheme of Community Road Works
Construction Organization Design of Municipal Road Engineering 1
Road A of the first bid section of Xingxian Jiayuan Phase II Municipal Road Project is the north side road of one of the municipal roads supporting the Xingxian Jiayuan Phase II Project. It is located in Xingwei Village, Qixia District. Road A (1), 35 meters wide, is a regional main road, located at the north end of the community, starting from Jingwu Road in the west and ending at the east end of the community, with a total length of 720.95 meters. The planned red line is 35m wide, and the channelized section at the intersection with Jingwu Road is 42m wide.

Topic: Road engineering construction organization design Construction steps of municipal road works Construction sequence of municipal road works
Construction Organization Design of Daqiao River Road Project
1 Site conditions The project is located beside Baling Middle Road, Yueyang Economic and Technological Development Zone, with convenient transportation and good construction conditions. The preliminary work has been basically completed.

Topic: Road engineering construction organization design Summary of road engineering construction Road construction contract
Construction organization design of municipal road engineering
General road engineering construction and main construction contents include: subgrade, pavement, pipe network, lighting, etc.

Topic: Road engineering construction organization design Construction steps of municipal road works Construction sequence of municipal road works
Xianyang Road Engineering Construction Organization Design
3、 Project overview: 1. Project location: Bid Section A of xx West Road, xx City (0+000-0+940) 2. Construction period: 120 calendar days. 3. Technical indicators of design engineering: ① road grade: urban secondary trunk road ② design speed: 40km/h ③ pavement service life: 12 years ④ radius of horizontal curve: ≥ 20m (minimum radius without turning at the intersection edge) ⑤ Cross slope of road: 2% ⑥ Design recurrence period of rainwater: 1 year ⑦ Width of road red line: 50 meters ⑧ Pavement structure of driving road: surface course AC-13 Ⅰ fine grained asphalt concrete 4 cm lower course AC-25 Ⅱ coarse grained asphalt concrete 5 cm base course: lime flyash macadam base course 20 cm subbase course: 12% lime soil subbase course: 30 cm ⑨ Pavement structure of sidewalk: C30 colored glazed brick surface course: 5 cm (JC440-910) M7.5 dry hard cement mortar base mortar: 3cm

Topic: Road engineering construction organization design Xianyang City Completion Data Catalog Summary of road engineering construction
Construction organization design of supporting road works of a project
1.1 Project overview 1.1.1 Project name, location, scale and duration 1. Project name: supporting road civil works of XXXX Agility Project. 2. Location: XXXX Development Zone. 3. Scale: The supporting road of Agilent project is located in XX High tech Industrial Park, which is composed of two roads, namely, Planning Road 1 and HNA Road. Guihua 1st Road is located in the west of XX Agileli Electronics Co., Ltd. (under construction), starting from Tinghai Road (the current West Ring Road) in the north and ending at Panghai Road (the under construction Kehai Road) in the south. The total length of the road is about 860m, and the width of the road red line is 20m. HNA Road is located on the east side of XX Agility Electronics Co., Ltd. (under construction), starting from Tinghai Road (the current West Ring Road) in the north and ending at Binhai Road (the Kehai Road under construction) in the south. The total length of the road is about 820m, and the width of the urban branch road is 20m. 4. Construction period: the tentative commencement date is August 30, 2007 and the completion date is June 24, 2008. The construction period is 300 calendar days.

Topic: Road engineering construction organization design Summary of road engineering construction Road construction contract
Construction organization design of a 63m wide road project in Nanjing
A、 Project overview The east extension project of xx Avenue is an important road project developed by Nanjing Jiangning Development Zone. It connects Ningli Road in the west and Jingjiu Road in the east, with a total length of 3000 meters and a road width of 63 meters, including 12 × 2 meters of carriageway, 4 × 2 meters of central separator, 5.5 × 2 meters of slow lane, 5 × 2 meters of sidewalk, and a total road area of 189000 square meters. The total length of the pipeline is about 7000 meters. The project is planned to be commenced on January 1, 2006 and completed on November 30, 2006. The total construction period is 330 days, and the quality of the project is "excellent." a. The horizontal and vertical design of the road: (a) The horizontal design of the road: a horizontal curve with a radius of 800 meters is set along the whole line. The control coordinates of planned intersections are determined according to the detailed control plan of the development zone. In the construction of this project, a break must be reserved in the central separator at the intersection.

Topic: Road engineering construction organization design Construction Scheme of Nanjing Road Engineering Construction Scheme of Nanjing Asphalt Road Project
Road engineering construction organization design scheme model
This data is a model of road engineering construction organization design scheme, which is detailed and can be used for reference.

Topic: Construction organization design scheme of road works Model of fire protection construction organization design scheme Model construction scheme for road works in rainy season
Construction Organization Design of a Central Avenue Road Project
The construction organization design of a Central Avenue road project is rich and detailed, and can be downloaded for reference and study by netizens.

Topic: Road engineering construction organization design Construction Scheme of Avenue Road Project Summary of road engineering construction
Construction organization design of a ring road project in Changsha
The project is a newly built ring road and also a municipal comprehensive project. The project includes roads, drainage, structures, power, telecommunications, street lamps, water supply, gas pipelines and other municipal professional projects. An experienced professional team is needed to work together and work together under a strong unified scheduling to successfully complete the task. This paper introduces the road earthwork engineering and various construction assurance measures in detail.

Topic: Road engineering construction organization design Construction scheme of loop line project Summary of road engineering construction
Construction organization design of road engineering in an economic development zone
1. Scope of work: the road (stake No.: 0+044-0+420) is 376m in total length and 16m in width, which is composed of 9m carriageway and 2 × 3.5m sidewalk; The road (chainage: 0+044-0+287) is 243 meters long, 16 meters wide, and composed of 9 meters of roadway and 2 × 3.5 meters of sidewalk;

Topic: Road engineering construction organization design Summary of road engineering construction Road engineering construction survey
Construction organization design of supporting road works of a project

The construction organization design of a supporting road project can be used for reference.

Topic: Road engineering construction design Supporting project construction Urban road works
Xianyang Road Engineering Construction Organization Design
The construction organization design of Xianyang road project is detailed and can be used for reference.

Topic: Xianyang Design Road engineering construction design Road engineering construction
Construction organization design of a road project in Zhengzhou
The construction organization design of a road project in Zhengzhou has detailed contents for reference.

Topic: Zhengzhou Municipal Planning Map Road engineering construction design Road engineering construction
Construction organization design of a reconstructed road project in Chongqing

The total length of the designed road is 485.4m, and the standard road width is 14m. There is a plane intersection, a 72.7m reinforced concrete arch bridge, and a 97m long and 14m wide underpass. The content is detailed and can be used for reference. 　　

Topic: Road engineering construction design Detailed drawing of Chongqing Chongqing Planning Map
Construction organization design of a road project in Laifeng County

2. Overview: * * Road is located at the bank of Youshui River in Laifeng County, with a total length of 2089.01 meters. This project is 700 meters (the extension section from Guandukou Bridge to Minzu Road). The starting point of the road is 128 meters away from the intersection of Wuhan Avenue and Fengnan Road, with a starting point elevation of 453.5; The end of the road is 176m away from the intersection of Wuhan Avenue and Minzu Road, with an elevation of 454.5. The height difference between the starting point and the ending point is one meter, the roadway is 2 × 4.5 meters wide, the flower bed is 2 × 2 meters, the sidewalk is 2 × 3.5 meters, and the total area is 14000 square meters. 　

Topic: Road engineering construction design Urban road works Road engineering drawing
Construction organization design of road works in a development zone (detailed)
**It is located in the south of * * area, close to the South Lake. The site extends north to Airport Third Road, south to * * Road (tentative name, the same below), west to * * Road, east to Luoshi South Road, with a total area of 114 hectares. It is a new hotspot for the development of residential areas in * * area. According to the overall urban planning, the future * * will be a new residential area with pleasant environment and convenient transportation. The urban expressway Luoshi South Road and the main trunk road * * Road pass along the east and west sides of the site, forming a checkerboard road network in the new city together with the north-south secondary trunk road * * Road and Publishing City Road, the east-west secondary trunk road Shipailing Road and Publishing City Road, the east-west secondary trunk road Airport Road 3, Wuliang Road, and the branch road Airport Road 4 and * * Road. The distance between crossings in the road network is 350~650m, and the road network density is 5.42km/km2. There are large fish ponds and lotus root ponds within the site, which have not been developed and constructed yet. The scope of this project covers the leveling works of the five plots of * * site (pond pumping, desilting, open earth excavation, filling leveling, rolling). The proposed site is located in Beigang Village and Xingfu Village of * * * * Hongshan Township. The elevation of the exploratory point orifice varies from 17.22 m to 21.11 m. The geomorphic unit is denudation accumulation plain (concealed third terrace).

Topic: Road engineering construction organization design Summary of road engineering construction Road construction contract
Construction organization of community road works design scheme
This title is the construction organization design scheme (4) of the road works in the community, and its contents are only for reference.

Topic: Construction organization design scheme of road works Construction Contract of Community Road Works Construction scheme of pipe network road works in the community
Construction Organization Design of Jingfu Road Extension Section
This document is the construction organization design of Jingfu Road Extension Section, which is detailed and can be downloaded for reference.

Topic: Road engineering construction organization design Construction Scheme for Road Extension Works Project extension contract
Construction Organization Design of a Community Road Project in Cixi City
The road construction organization design of a community in Cixi City includes the road works between communities (A and B). Located in the community in Cixi City, it is a municipal supporting project of the community. The main roads in the community are 14 meters or 13 meters wide, and the secondary roads are 4.5 meters, 6 meters and 7.5 meters wide. The asphalt concrete pavement structure is adopted. The asphalt concrete pavement, curbs, sidewalks and other contents in the project area are rich and can be downloaded for reference by netizens

Topic: Road engineering construction organization design Construction Contract of Community Road Works Construction Scheme of Community Road Works
Construction Organization Design of Luyang Industrial Road Project
The original landform of the project site is basically low-lying water grassland with surrounding drainage ditches passing through. According to the scheduled construction plan, how to take technical measures for construction in rainy season and how to solve the drainage of the construction site will also be the key to ensure the quality and quantity of the project.

Topic: Road engineering construction organization design Summary of road engineering construction Road construction contract