Construction Scheme for Reconstruction of an Old Building in Hangzhou

Uploaded on: 2019-12-17 15:05:19 come from: Water supply and drainage / Water supply and drainage construction design / construction plan

zero

2.98 points

The main works of this project are roof flat to slope, elevation renovation and corridor improvement. The content is detailed and can be used for reference.

Construction Scheme for Reconstruction of an Old Building in Hangzhou (Flat to Slope) - Figure 1

Construction Scheme for Reconstruction of an Old Building in Hangzhou (Flat to Slope) - Figure 2

Construction Scheme for Reconstruction of an Old Building in Hangzhou (Flat to Slope) - Figure 3

Construction Scheme for Reconstruction of an Old Building in Hangzhou (Flat to Slope) - Figure 4

Construction Scheme for Reconstruction of an Old Building in Hangzhou (Flat to Slope) - Figure 5

Click to download the source file now

Special statement: This material belongs to the sharing uploaded by users Downloaded content, only for learning, not for commercial use. If there is any copyright problem, please timely contact Station delete!

Collection

WeChat code scanning and sharing

Click to share

Related recommendations

Construction Scheme for Cooling Tower of a Power Plant in Hangzhou
The construction process of hyperbolic cooling tower is generally divided into three parts: below the ring beam, cylinder body and tower core. The following parts of the ring beam include earthwork, foundation treatment, annular foundation, pool floor, pool wall, herringbone column buttress, herringbone column and other parts of the construction; The cylinder construction includes the cylinder turnover construction, the anti-corrosion construction of the inner wall of the cylinder, and the construction of auxiliary facilities such as tower climbing ladder, tower top railing, etc; Tower core construction includes: prefabrication and hoisting of sprinkling frame beam, column and water tank; Installation of water spraying filler, sprinkler, etc.

Topic: Cooling tower construction scheme Waterproof construction scheme of cooling tower pool Cost of cooling tower
Construction Scheme of Steel Structure of a Round Hall in Hangzhou
Project overview A factory building project is a modern factory building with a building area of 250000 m2, integrating scientific research and production. Our company is mainly engaged in the fabrication and hoisting of stiffened wall coupling beams, steel beams on the second and third floors of its section II circular hall. The maximum span of the steel beam is 34.1m, the section is 3250mm × 600mm × 40mm × 60mm, and the heaviest is 57.3t.

Topic: Hangzhou steel structure reinforcement Hangzhou Road Construction Scheme Hangzhou Winter Construction Scheme
Temporary construction scheme of a residential project in Hangzhou
The project is located at the * * * side of the intersection of * * * Road and * * * Road in * * * District of Hangzhou City. The total planned building area of the community is about 410600m2, and the total project area is 27000m2. Our construction area is Phase II project, and the design scope is 4 groups of residential buildings, including 12 multi-storey residential buildings, 2 small high-rise residential buildings and 4 # semi underground garage. Total building area of the four clusters: 68245 ㎡. Among them, the aboveground floor area is 48939.1 ㎡, and the semi basement floor area is 19305.9 ㎡. Base area on the first floor: 8035.2 ㎡. The proposed site area is relatively flat. Most of the surface is domestic garbage and miscellaneous garbage, and there is serious ponding on the surface. Its formation is caused by Quaternary alluvial and shallow marine sedimentary facies. The "three supplies and one leveling" of the site has been completed. The surrounding area of the foundation pit is open space. The east side of the site is the land for Phase I project. The structure has been completed. Qiu Xudai River is 15 meters to the south. 20 meters to the west is * * * Road, with convenient transportation. The north site is vacant, and the original planned building has not been constructed.

Topic: Temporary construction scheme Hangzhou Winter Construction Scheme Hangzhou Road Construction Scheme
Construction Organization Design Scheme of Old Building Reconstruction and Decoration Works in 2018
The old house reconstruction project of Duyun International Football Town is located in Duyun Economic Development Zone, with a floor area of 12900 square meters, 33 buildings in total (2 #, 10 #, 11 #, 13 #, 17 #, 26 #, 27 #, 31 #, 32 #, 34 #, 35 #, 36 #, 37 #, 38 #, 39 #, 40 #, 41 #, 42 #, 43 #, 44 #, 46 #, 50 #, 52 #, 54 #, 55 #, 56 #, 57 #, 58 #, 70 #, 71 #, 72 # building, 73 # building 119 # building). The floor heights are uneven, generally from the first floor to the second floor. Most of the original exterior wall facades are red brick and green brick walls, with steel windows, wooden windows and wooden doors (all rusted and damaged) installed. This project is mainly to organize manual construction on the front elevation, rear elevation, side elevation, roof and other parts of the original building according to the requirements of the design drawings, external wall coating, external wall brick pasting, and external wall cleaning; Roof top surface removal, roof cleaning, roof water, roof surface; Door and window installation, internal wall cleaning, wall demolition and removal of the original internal and external walls of cement mortar plastering, cleaning the external skirt and indoor equipment foundation and other residues, internal wall coating; Indoor floor cleaning and leveling; The cleared garbage shall be transported to the site designated by the Owner. Outdoor decoration and decoration such as light steel structure reinforcement and concrete reinforcement completely change the old building appearance and make it more beautiful.

Topic: Construction Scheme of Old Building Decoration and Reconstruction Project Decoration project construction organization design scheme Construction organization design scheme of residential decoration project
A residence in Hangzhou Level to slope Cad construction drawing of structural design
This document is a CAD construction drawing for the structural design of a residential building in Hangzhou. The drawings include: the layout of the newly added partition wall on the roof, the plan of the roof, the plan of the horizontal beam and the plan of lightning protection. The design is accurate and the content is detailed, which can be downloaded for reference by netizens.

Topic: Cad construction drawing of residential flat to slope Construction drawing of structure of level to slope Level to slope structure
Construction Organization Design of Yangzhou Old Building Facade Reconstruction
The external facade reconstruction construction organization design of the old building in Yangzhou, the original external facing and doors and windows still need to be removed, and the building is normally open during the construction period.

Topic: Construction organization design of facade reconstruction Construction organization design for reconstruction of old residential buildings Old building construction organization design
Electrical construction drawing of reconstruction project of an old middle school building on the fifth floor

General Description of Data Catalog Design and List of Main Equipment and Materials Plan of Power Distribution Lighting Floor 1 Plan of Weak Current Floor 1 Plan of Power Distribution Lighting System Plan of Power Distribution Lighting Floor 2 and 3 Plan of Weak Current Floor 2 and 3 Plan of Weak Current System Plan of Power Distribution Lighting Floor 4 Plan of Weak Current Floor 4 Plan of Power Distribution Lighting Floor 5 Plan of Weak Current Floor 5

Topic: Old building reconstruction Fifth floor electrical construction drawing Electrical construction drawing of middle school
CAD drawings of construction drawings of an old building reconstruction project in a place
This drawing is a CAD drawing for the construction drawing of an old building reconstruction project in a certain place, which includes: reinforcement of stair landing slab, detail drawing of nodes, structural plan of pitched roof, structural drawing of stairs, detail drawing, etc. The content of the drawing is complete, clear and precise, and designers are welcome to download and use it.

Topic: Old building reconstruction Construction drawing of reconstruction project Construction drawings of reconstruction project
Bidding Document for Old Building Reconstruction Project of a Hospital in Shenzhen
The bidding document of an old building reconstruction project of a hospital in Shenzhen is in PDF format, with 75 pages in total

Topic: Basis for preparation of bidding documents Bidding documents for cost consultation Bidding Document for Flood Control Assessment
Construction supervision outline of an old building reconstruction project
4、 Design features and construction difficulties of the project 1. The project is an old building reconstruction project, which has a large amount of work on site, scattered working faces, many sub divisional and sub divisional works, and the office of the project is the daily office of the main leaders, technical departments and personnel in the factory after decoration. Therefore, the construction period, civilized and safe construction, environmental protection, and the organization of transportation and the mobilization and demobilization of materials and equipment are very strict, which will become the key management and control content of the project of our company; In addition, how to minimize construction noise and ensure the normal working environment of the construction unit during construction is also the focus of construction management. 2. The project has complete functions. Many professional types of work need to be interchanged and interspersed with construction. Therefore, advanced management means such as network planning are needed to plan the construction of the whole project as a whole, strengthen the management and scheduling of the site together with the construction unit, and strengthen the supervision of materials and processes by the supervision unit. 3. The quality, service level and construction progress of the project will directly affect the image and reputation of our construction team. Therefore, as the construction unit, we will closely organize and coordinate the construction of the project, and scientifically design and reasonably arrange the construction plan, organization and management, And be responsible for the whole process of the project from construction to warranty to ensure the best service and first-class products for users. 4. The core task of the project is to implement "process quality" through strict procedures and process control, build the project into a first-class building, achieve the quality goal of "qualified project" of the project, and fully satisfy the owner.

Topic: Engineering construction supervision Supervision outline of road reconstruction project Supervision Outline of Decoration and Reconstruction Project
Construction supervision outline of an old building reconstruction project_
This project is an old building reconstruction project, which needs to remove some of the original facilities and make corresponding decoration according to the construction drawings. The main interior decoration contents of the project are summarized as follows: ceiling: microporous ceiling of the information center, painted keel mineral wool board in the corridor, except that the VIP room is a light steel keel gypsum board falling ceiling, other offices will keep the original ceiling unchanged and be renovated with white latex paint. Wall and column surface: the wall and column surface shall be painted with white emulsion paint for renovation, and part of the wall shall be demolished and built, including the treatment of wood pole wall and shielding wall, and the installation of marble window sill. Doors and windows: The office shall be installed with Moganshan brand red cherry solid wood craft finished double door, sub door and single door, and the bright windows shall be partially blocked according to the design requirements of the construction drawing.

Topic: Engineering construction supervision Supervision outline of road reconstruction project Supervision Outline of Decoration and Reconstruction Project
Level to slope Roof reconstruction design drawings
In order to solve the current situation of poor heat insulation effect and poor waterproof engineering of flat roof, many regions have carried out the "flat to slope" project in a large scale. This paper introduces the structural form, structural design method, precautions in construction and many detailed practices used in the design of flat to slope roof.

Topic: Building structure of flat roof to sloping roof Roof reconstruction works 03j203 Building structure of flat to sloping roof
Construction design scheme for renovation and decoration project of an old office building in Xi'an
The preparation of the construction organization design of the project follows the following basic principles: 1. Ensure the key points, make overall arrangements, comply with the commitments, the provisions of the bidding documents and the minutes of relevant design Q&A meetings. 2. According to the content of the project, in the principle of "applicability, safety, economy, rationality and advancement", scientifically arrange the construction procedures, reasonably organize the construction, ensure that all construction activities promote each other, closely link up, accelerate the construction progress and shorten the construction period. 3. Adopt advanced construction technology, reasonably select construction scheme, maintain the company's quality system and make it operate effectively, ensure safe production and improve project quality. 4. Fully tap and utilize the potential of machinery and equipment, improve the degree of mechanization, reduce labor intensity and improve labor productivity.

Topic: Xi'an Municipal Construction Scheme Construction Scheme for Old Office Building Reconstruction Scheme of adding elevator to old buildings in Xi'an
Construction organization design scheme for renovation and decoration project of an old building in a city
This technical proposal serves as the basis for guiding construction of the project. During preparation, the construction deployment, main technical schemes and measures, project quality and construction safety assurance system, project leader and organization management organization, construction site layout, construction schedule control, construction machinery status description and list, labor organization, promotion of new technologies, new materials and new processes The material ordering and supply plan, capital demand plan, civilized construction and other factors shall be fully considered to highlight its feasibility and scientificity.

Topic: Construction Scheme of Old Building Decoration and Reconstruction Project Decoration project construction organization design scheme Construction organization design scheme of residential decoration project
Steel structure construction scheme for reconstruction of an old hospital building in Beijing
The steel structure part of the project is all distributed within Area A. In order to make the construction process arrangement more smooth, the steel structure can timely hand over the construction working surface to civil engineering and other sub divisional works for construction. It is proposed to divide the steel structure hoisting into A1 and A2 areas for sectional construction. With axis 7 as the boundary, the west of axis 7 is section A1, and the east of axis 7 is section A2. The lifting of A1 section is completed by C7050 tower crane, and the lifting of A2 section is jointly completed by C7050 and QTZ7030 tower crane. A1 section is the main pilot work area, and A2 section is the auxiliary work area. The hoisting sequence of steel structure is from bottom to top, from column to beam, from primary to secondary. During the hoisting of columns and beams on each floor: the four GKZs at the intersection of the four axes B, C, 4 and 5 are taken as the starting point for the hoisting of section A1, so that the four GKZs form a standard rigid frame first, and then expand outward in turn according to the sections. The steel structure in the vertical plane shall be installed according to the unit structure layer (the height of the single GKZ column is the height of the unit structure layer). In order to ensure the hoisting quality, ensure the stability of the frame and facilitate the calibration, the hoisting sequence of the steel beams in the unit structure layer of multiple floors is: first hoist the lower main beam, then hoist the lower beam, then hoist the middle main beam and middle beam, and finally hoist the upper main and secondary beams. The hoisting of the steel beams in the same floor plane follows the hoisting of the corresponding steel columns in turn. Similarly, the four GKZs at the intersection of axes B, C, 9 and 10 are taken as the starting point for hoisting of A2 section, and the installation method is the same as that of A1 section.

Topic: Construction Scheme for Steel Structure Reconstruction Beijing old building reinforcement construction scheme Construction Scheme for Adding Elevator to Old Buildings in Beijing
Construction Scheme of a Comprehensive Building Project in Hangzhou
The construction scheme of a comprehensive building project in Hangzhou, Hangzhou XXX comprehensive building project is an important project serving the national public utilities; It consists of two floors underground and 22 floors above the ground. The structure is a reinforced concrete full frame and shear wall system. The fire resistance rating is Grade I. The foundation is a bored pile foundation, with a total building area of 129590m2. The indoor elevation of ± 0.000 in the building of this project is equivalent to the elevation of 5.000 m in the Yellow Sea.

Topic: Construction Scheme of Comprehensive Building Project Construction Scheme of Hangzhou Project Construction Scheme of Hangzhou Formwork Project
Construction scheme of mass concrete for a high-rise building in Hangzhou
Project overview The project is located in the plot of * * * * in the southern Fuxing area of Hangzhou City, with * * * * Road to the east, waiting * * * Road to the south, * * * Square to be built to the west, and * * * Road to the north. It is composed of a 33 storey apartment, a 29 storey apartment, a 2-storey group house, and a 2-storey underground garage. This construction section consists of AB residential building, with two floors of basement. The structural elevation of the underground second floor is -9.400m, the foundation slab is 550mm thick, the cushion cap height is 1500mm, 1800mm, 2200mm3, and the ground beam height is 1200mm. Underneath the foundation is a 150mm thick C15 plain concrete cushion, and the amount of impermeable concrete for the basement floor is about 7900m3. ± 0.000 in this project is equivalent to the absolute elevation of 7.950m. The design strength of raft foundation concrete is C40, P6 impermeable concrete, and the design requires the basement structure concrete to be self waterproof. The project is developed and constructed by Zhejiang * * * Property Development Co., Ltd., designed by China * * * Engineering Company, supervised by Zhejiang * * * Engineering Supervision Co., Ltd., and contracted by Hangzhou * * * Group Co., Ltd.

Topic: High rise mass concrete construction scheme Specification for mass concrete Specification for Mass Concrete
Overall construction scheme of a high-rise office building in Hangzhou
Hangzhou * * * Project is one of the important landmark buildings in Hangzhou and a key project in Zhejiang Province. The project is located on the north side of Chunqing Road, facing the Jianggan District Government. The project is invested and constructed by Hangzhou * * * Co., Ltd., designed by Hangzhou Zhehua Architectural Design Firm, supervised by Zhejiang Engineering Consulting Co., Ltd., and contracted by Zhongtian Construction Group Co., Ltd. The Hangzhou * * * Project Department of Zhongtian Construction (hereinafter referred to as the Project Department) was established. The purpose of this construction organization design is to provide a more complete programmatic document for the project construction stage based on the overall situation of the construction and according to the Engineering Geological Report, Hangzhou * * * Design Drawings, Foundation Pit Enclosure Design and site construction conditions. Some special project plans will be deepened on this basis to guide the project construction and management. The project department organized the engineering technical management personnel to comprehensively analyze the structural characteristics, decoration requirements and geographical environment of the project, and combined with the advantages of the company, put "first-class construction technology, first-class project management, first-class construction speed, first-class construction equipment" into the construction of the project to ensure high-quality, high-speed, safe, civilized Complete the construction tasks of the project in a green way.

Topic: Construction scheme of high-rise office building Overall construction scheme of high-rise building Overall construction scheme
Construction Scheme for Deep Foundation Pit Excavation of a Powerhouse in Hangzhou
Hangzhou Electric Engineering is located in Fengchuan Industrial Park. 4 # plant is located in the north of the office building. The excavation position of deep foundation pit of 4 # powerhouse is axis 17~22/axis A~F, of which axis 22 has the deepest excavation depth, and the excavation depth of foundation pit is 12~22/axis A~F ranging from - 2.6~- 7.3 meters. Due to the difficulty of deep foundation pit excavation and many influencing factors, the following is the construction measures for local deep foundation pit excavation of 4 # powerhouse. The axis size of 4 # powerhouse structure is 27.66m × 100m, the excavation depth of foundation pit is 1-12 axis/A-F axis is -1.9m, and the soil is stable. 12~22 axes/A~F axes range from - 2.6 to - 7.3 meters. According to the geological survey report, the foundation soil of 4 # power house mainly uses the second silty clay layer with gravel as the bearing stratum. Since the soil in this mountain area is relatively unstable, according to the site excavation and the understanding of nearby people, the 12~22 axis/A~F axis area is a mountain depression, which is then backfilled with pond slag to the current flatness. The groundwater level is -5.35m. After comprehensive discussion among the construction unit, design and geological exploration, it is decided to excavate until the soil layer meets the requirements. According to the experience of deep foundation pit excavation, it is decided to adopt sloping excavation for 4 # powerhouse excavation.

Topic: Hangzhou earthwork excavation construction scheme Foundation pit excavation Construction scheme of elevator foundation pit excavation
Diving dewatering construction scheme for a station of Hangzhou Metro
Diving and dewatering construction scheme for a station of hangzhou metro

Topic: Construction Scheme for Municipal Drainage Hangzhou Road Construction Scheme Hangzhou Winter Construction Scheme
Hangzhou Hualing International Formwork Construction Scheme
This document is the construction scheme of Hangzhou Hualing International formwork, and the contents of the document are detailed for reference.

Topic: Construction Scheme of Hangzhou Formwork Project Hangzhou Road Construction Scheme Hangzhou Winter Construction Scheme
Construction scheme and calculation sheet of a scaffold in Hangzhou
2.1 Project introduction No. Project content 1 Project name: Old City Reconstruction Project (West Block) around * * * * Square, Yuhang District, Hangzhou 2 Project address: west of * * * Square ****To the east of the apartment, 3 construction units: Hangzhou Yuhang District * * * * Project Construction Co., Ltd., 4 design units: Beijing * * * * Construction Affairs Co., Ltd., 5 supervision units: Zhejiang * * * * Construction Project Management Co., Ltd., 6 supervision units: Hangzhou Yuhang District Quality Inspection Station, 7 construction units: Hangzhou * * * Construction Engineering Co., Ltd., 8 basic conditions, construction period, quality objectives: 540 days, West Lake Cup

Topic: Scaffold calculation sheet construction scheme Internal scaffold calculation sheet Hangzhou Scaffold Construction Scheme
Construction scheme for sandblasting and painting of a company in Hangzhou
Data catalogue 1. Preparation basis 2. Preparation principle 3. Personnel preparation before construction 4. Material preparation 5. Technical preparation 6. Organization preparation 7. Construction site layout 8. Equipment input and schedule 9. Process flow 10. Construction process 11. Clear rewards and punishments 12. Safe and civilized construction 13. Safety measures for construction in rainy season 14. Quality assurance system 15. Safe production Detailed Management Rules for Civilized Construction Attached Figure 2 Steel Structure Anticorrosion Process of Hangzhou * * (Hangzhou) Co., Ltd. Attached Figure 3: Detailed Diagram of Mechanical Equipment Input

Topic: Painting construction scheme Method statement of sand blasting pipeline Pipeline sandblasting construction scheme
Diving dewatering construction scheme for a station of Hangzhou Metro
The main retaining structure adopts φ 1000 bored occluding piles, and the occluding amount of two adjacent piles is 250mm. The total length of the station is 174.65m, the width is 18.7m, and the excavation depth of the station is 17.5m. The auxiliary structure of the station includes 2 air ducts and 3 entrances and exits, which are constructed by open cut method. It is a single-layer double span structure, and the enclosure adopts φ 850SMW construction method.

Topic: Construction Scheme of Metro Station in Rainy Season Metro station survey scheme Construction Scheme for Decoration of Metro Station
Construction scheme of cast-in-place beam of a bridge in Hangzhou
Construction scheme of cast-in-place beam of a bridge in Hangzhou

Topic: Construction contract of a bridge Construction scheme of a bridge project Special construction scheme for cast-in-place bridge
Construction Scheme for Tower Crane Installation and Dismantling of a Comprehensive Building in Hangzhou
A project in Hangzhou, located in the west of Dengyun Road and the north of Yinxiu Road, is designed by Hangzhou XX Engineering Technology Development Co., Ltd. The project is composed of 22 floors of office building A, 22 floors of office building B, 20 floors of office building C, 3 floors and 2 floors of underground buildings of Furniture Town, with a building area of 129590 square meters, a total land area of 24740 square meters, including 43000 square meters of underground buildings. The maximum height of the building is 81.9M.

Topic: Construction scheme of tower crane Hangzhou Road Construction Scheme Hangzhou Pipeline Construction Scheme
Formwork construction scheme of a high-rise apartment project in Hangzhou
The top plate, beam and wall formwork shall be made of 18 thick nine plywood, the keel back brace shall be made of 60mm × 80mm square timber, the support system and hoop shall be made of φ 48 steel pipe scaffold and movable steel pipe top palm, and the release agent shall be oily release agent. Inspect and select relevant material manufacturers in advance according to the required materials.

Topic: Construction Scheme of Hangzhou Formwork Project Apartment formwork construction scheme Construction scheme of high-rise apartment
Construction scheme of cast-in-place beam of a bridge in Hangzhou

A bridge in Hangzhou, with a total length of 380m. The cast-in-place box girder is composed of 4 × 50m and 50+80+50m double continuous beams, which is a double bridge structure with left and right spans. The content is detailed and can be used for reference.

Topic: Beam construction scheme Construction scheme of cast-in-place arch bridge Construction scheme of cast-in-place arch bridge support
Safe and civilized construction scheme of a high-rise building in Hangzhou
1、 Project overview The total building area is 21256m2. 22 # building: one floor underground (600 m2), 16 floors above the ground, 44.8m high (50.9m high locally), with a building area of 11276m2; Building 23 #: one floor underground (600 m2), 14 floors above the ground, 39.7m high (45.3m high locally), with a building area of 9989m2; Reinforced concrete frame shear wall structure is adopted. 2、 Specific implementation measures to ensure safe production: in order to ensure the smooth construction of the project, implement the policy of "safety first, prevention first", put an end to all kinds of accidents, make the site management standardized, standardized and institutionalized, and strictly refer to the JGJ59-99 construction site safety inspection standard of the Ministry of Construction, Establish the project safety production responsibility assurance management network system and safety production objectives, and assign responsibilities to people.

Topic: Safe and Civilized Construction Scheme for High rise Buildings Basis for preparation of safe and civilized construction scheme
Safety construction scheme for a multi-storey residential complex in Hangzhou
Total building area: 63090m2. Focusing on "three-level safety education", it focuses on safety education for new workers, including safety technical knowledge, equipment performance, operating procedures, safety systems and prohibited items. Only after passing the examination can they enter the operating post. The original employees are mainly trained and regularly educated in safety activities to strengthen and improve their safety ideology and production level. When using new technology, new process, new equipment for construction and changing jobs, operators shall be given safety education on new technology operation and new jobs, and they shall not work without education.

Topic: Hangzhou Winter Construction Scheme Hangzhou Concrete Construction Scheme Hangzhou Pipeline Construction Scheme
Safety construction scheme of a steel roof truss project in Hangzhou
There are 5 steel roof trusses in 101 # steel roof truss project, each weighing 9.219KG, with a total weight of about 50 tons. The span of steel beam is 36 meters, the range of installation components is 54 m * 36 m, and the building area is 1958 square meters. The columns are cast-in-place concrete, and the bottom chord elevation is 16.4 meters. This plan is prepared to ensure the smooth progress of the project, strengthen the safety production management, clarify the responsibility and check at all levels. 1. Safety production objective: put an end to major casualty accidents, equipment and traffic accidents; Reduce the frequency of general accidents, and control the frequency of general accidents below four thousandths.

Topic: Safety construction scheme of steel roof truss Construction scheme of large-span steel roof truss Special construction scheme for steel roof truss hoisting
Special construction scheme for safety production of a project in Hangzhou
Under the leadership of the Quality and Safety Section of the company, the Project Management Department sets up a safety production team, with the Project Manager as the team leader and the permanent organization in the safety production team. The Project Management Department shall have a full-time safety officer, each construction team shall have a full-time safety officer, and each team shall have a part-time safety officer, so as to form a safety management network for the whole project construction.

Topic: Special construction scheme for project safety production Special Construction Scheme for Hangzhou Energy Conservation Hangzhou Special Construction Scheme
Safety construction scheme for residential reconstruction project
1) Project name: Urban Village Reconstruction Project of XX Village, XX District, Zhengzhou City 2) Construction site: north of XX Road, west of XX Road, between XX Community and XXXXX City, Zhengzhou City. 3) Construction unit: XX Group XXXX Real Estate Co., Ltd 4) Designer: XXXX Design Institute Co., Ltd 5) Survey unit: Zhengzhou Geotechnical Engineering Survey and Design Institute 6) Supervisor: Zhengzhou XX Construction Supervision Consulting Co., Ltd 7) Construction unit: Fujian XX Group Co., Ltd 8) Structural form: frame shear wall structure, shear wall structure 9) Building floors: 2 floors underground, 12~34 floors above ground 10) Building area:, total underground building area 39460.36m2; The ground floor area is 129295.35 m2; The total building area is 168755.71 m2. Among them, 1 # building has a floor area of 17762.97 m2, 2 # building has a floor area of 35579.17 m2, 3 # building has a floor area of 5423.32 m2, and 4 # building has a floor area of 38666.20 m2; The ground floor area of Building 5 # is 30174.35 m2. Building height: the first underground floor is 3.6m high, the second underground floor is 3.7m high, the standard floor is 2.9m high, and the total height of the building is 35.1~99.7m.

Topic: Safety construction scheme of reconstruction project Housing reconstruction construction scheme Residential reconstruction project contract
Construction Scheme of Nanyingxiang Road Reconstruction Project
Construction Scheme for Reconstruction Project of South Yingxiang Road Construction Scheme for Reconstruction Project of South Yingxiang Road Construction Scheme for Reconstruction Project of South Yingxiang Road

Topic: Reconstruction project construction scheme
Renovation and decoration construction scheme of a hotel in Liaoning
1. Project name: Decoration and Reconstruction Project of Liaoning * * * Hotel 2. Tenderee: Liaoning * * * Hotel 3. Bidding agency: Liaoning * * * Architectural Design and Research Institute * * *

Topic: Decoration and reconstruction construction scheme Liaoning insulation construction scheme Liaoning winter construction scheme
Construction scheme for retrofitting boiler flue in power plant
The content introduction manuscript is a boiler steel flue reconstruction project of a power plant in China; Specifically, the original flue shall be removed, and new flue shall be fabricated and installed. In order to complete the fabrication and installation of the flue smoothly and efficiently, with quality and quantity guaranteed, this construction scheme is hereby prepared as the guiding technical document for the fabrication and installation of the entire flue. The flue is divided into 6500 × 6500 × 6, 6000 × 7000 × 6 and other specifications; The flue weighs about 370 tons. The total construction period is 55 days. Selection of welding process parameters: (1) Selection of welding rod: J422 welding rod shall be used according to the drawing requirements. Selection of welding rod diameter: φ 3.2mm welding rod shall be used for the first backing of vertical (longitudinal) horizontal (circumferential) welds, and φ 4mm welding rod shall be used for the subsequent layers of vertical (longitudinal) horizontal (circumferential) welds. (2) Selection of welding current: the selection of welding parameters is determined by welding procedure qualification. Generally, 90~120A current is used for the first pass of vertical (welding) weld, and 120~160A current is used for the subsequent passes. 90~120A current is used for the first pass of transverse (circumferential) weld, and 100~160A current is used for the subsequent passes The data is 10 pages in total.

Topic: Construction Scheme for Power Plant Flue Reconstruction Boiler reconstruction construction scheme Construction scheme for boiler reconstruction
SHW4.2 Boiler Overhaul and Transformation Construction Scheme
Content introduction SHW4.2-0.7/95/70 boiler overhaul and transformation construction scheme, project content: 1. Replace all heating surface tube groups and headers of SHW4.2-0.7/95/70 boiler 2. Dismantle furnace wall 3. Grate overhaul and transformation

Topic: Overhaul and reconstruction construction scheme Boiler reconstruction construction scheme Construction scheme for boiler reconstruction
Special construction scheme for HVAC of a reconstruction project
The project is a multi-storey R&D office building with a height of no more than 24 meters. It is divided into buildings B, C, D and E, F, G, with a total building area of about 38040 square meters. One floor underground and four floors above the ground. B. On the ground of buildings C and D are offices, meeting rooms, working laboratories and equipment laboratories; The basement is a restaurant. E. On the ground of buildings F and G are offices, meeting rooms, working laboratories and equipment laboratories; The basement is for bicycles and warehouses. The main work contents of ventilation and air conditioning discipline of mechanical and electrical installation engineering of the project include: air supply and exhaust system, smoke control and exhaust system, air conditioning system, air conditioning water system, refrigeration system, independent air conditioning system and humidification system.

Topic: HVAC reconstruction construction scheme Winter construction items Special safety construction scheme
Shotcrete reinforcement and reconstruction construction scheme
This project is a * * * reinforcement project. The teaching building was built in 1999, with two floors above the ground, no basement, and cast-in-place floor. The reconstruction and reinforcement method: the two sides of the load-bearing wall of the stairwell and the inner side of the deformation joint load-bearing wall are reinforced with cast-in-place reinforced concrete slab walls, and the shotcrete construction process is used for construction. The project reinforcement mainly involves: concrete spraying, scaffolding and erection, wall surface;

Topic: Construction scheme of reinforced shotcrete Reconstruction and reinforcement construction scheme Reinforcement and reconstruction construction scheme
Electrical construction scheme of hospital reconstruction project
The reconstruction project of the operating room of Beijing Municipal Hospital includes the operating room on the first floor underground and the equipment room on the second floor underground. There are seven reconstructed operating rooms. The floor height is 5.12M, the ceiling elevation is 2.9M, and the auxiliary area is 2.5M. The weak current system of the project includes network wiring system, cable TV system, intercom system, automatic fire alarm and fire linkage system. According to the requirements of the owner, the scope of this bidding is the embedding of weak current system, and the construction process is the same as that of strong current piping. This document is the electrical construction scheme of the hospital reconstruction project, 25 pages in total.

Topic: Hospital reconstruction construction scheme Electrical construction scheme of reconstruction project Construction scheme of electrical transformation