-
The mold drawing is a plastic part of an electronic product shell, 1 * 1, which uses a fine nozzle to feed glue. There are side holes in the direction of the front mold of the product. The current mold structure uses the front mold row position, and the last ejector pin ejects the product. The return of the ejector plate is ensured by the forced pull back mechanism and the travel switch. The drawing file has a clear structure, which can be used for reference
-
Three dimensional model drawing and assembly design of electronic product display cabinet. This cabinet can be disassembled into several small pieces for convenient transportation. It is used to display electronic products in exhibition halls and exhibitions. There are three large screens on the side, which have strong visual impact
-
The LCD display model of electronic products (MP4) is composed of several display units (unit display board or unit display box) that can be combined and spliced to form a screen body, plus a set of appropriate controllers (main control board or control system). Therefore, various specifications of display boards (or unit boxes) can be combined with controllers of different control technologies to form many kinds of LED displays to meet the needs of different environments and display requirements
-
This design is the design model diagram of the inspection table for electronic products, which is applied to the circuit board production line. This is used for the tape inspection of microelectronic devices to check the welding effect of the circuit board patch or plug-in. This 3D model is only for exchange and learning. Welcome to download it
-
It is used for the display of electronic products. The display board is made of aluminum plate, and the mounting holes are made according to the size of the display electronic components. The upper panel is provided with a handle for easy display removal. The bottom surface is provided with anchor, which is used to fix and adjust the height and level. The display board structure is installed in the finished waterproof box. There are STP format files in the file, which are suitable for opening various mechanical software
-
This design is the design model diagram of the electronic product testing fixture. According to the electronic test, the probe adopts the test probe: the circuit board test before the components are installed and the open circuit and short circuit detection probe only. Most domestic probe products can replace imported products; This design is relatively complete as a whole, and can be used for testing different products, only for communication and learning. Welcome to download
-
This is the manipulator for loading electronic products. The parts of this manipulator model are all made of aluminum. This manipulator is used to hold electronic components. This model hopes to help friends who do non-standard design. The model contains a common format. Welcome to download and learn
-
Digital clock design model of electronic products This is the clock design model diagram of an electronic product. It is a clock that uses digital circuit technology to realize the timing of hours, minutes and seconds. Compared with the mechanical clock, it has higher accuracy and intuition, longer service life, and has been widely used. There are many design methods of digital clock, for example, electronic clock can be composed of small and medium-sized integrated circuits, electronic clock can also be composed of special electronic clock chip with display circuit and its required peripheral circuit, and electronic clock can also be realized by single chip microcomputer. Each of these methods has its own characteristics, among which the electronic clock realized by MCU has
-
The mold drawing is a plastic part of an electronic product cover, 1 out of 1, with hot runner for glue injection. There is an undercut in the front mold direction of the product. The current mold adopts the front mold oblique jacking, and the side undercut in the rear mold direction of the product adopts the rear mold line position, and the final ejector pin ejects the product. The return of the ejector plate depends on the forced pull back mechanism to ensure the return of the ejector plate. The drawing file structure is clear and can be used for reference
-
Drawing introduction: It is designed by Solidworks. Apple watches and mobile phones expand the electronic product model. Apple phones and iPads have turned into arcades in first tier cities. At that time, many people wondered why someone would pay so much money to buy a mobile phone. All mechanical control model fans, welcome to download
-
The precision conveyor belt for electronic products comprises a first fabric layer and a second fabric layer. The lower surface of the first fabric layer is connected with the upper surface of the second fabric layer through an adhesive layer; The upper surface of the first fabric layer is coated with a first polyvinyl chloride layer, and the upper surface of the first polyvinyl chloride layer is coated with a conductive carbon black layer; The lower surface of the second fabric layer is coated with a second polyvinyl chloride layer. The utility model provides an antistatic conveyor belt, which uses the conductive carbon black layer to accelerate the electrostatic leakage, avoid the massive accumulation of static electricity on the conveyor belt, effectively ensure the use performance of the transmission electronic products, and has low manufacturing costs
-
This drawing is a double row conveyor belt for electronic products, which can be used to make the scheme and has simple structure. The main body adopts two conveyor belts as the owner's theme, the square tube as the support underframe, and the side wall adopts the form of bent plate, which is simple and reliable, and is commonly used to transport fixed size objects such as tooling plates, with a wide range of applications
-
This model is an integrated machine for cutting and bending electronic product pins. It is fully automated and has two functions: bending and cutting. The power source is servo motor driven by cylinder, which is a very good reference structure. This structure is of great reference value. Welcome to download
-
It is mainly used for the magnetic circuit components of the 3C industry's sound generating unit products to carry out adhesive hot melting, which is highly efficient and suitable for mass production. It is equipped with a spring mechanism, which can effectively control the hot melting pressure of each product. The pressure is given by the cylinder, or it can be changed to an electric cylinder, which has better effect. The temperature can be controlled at will, and it is easy to maintain. The product is simple to change, low in cost. 3D is drawn by cero, and is in STP format
-
Multi station electronic product solder dispensing equipment, a very mature and stable equipment in the electronic industry, contains a very classic mechanism device, a graduated turntable structure, a number of suction robots to grab and place the product, the tooling plate integrates matrix feeding to the original, which is very efficient, automatic assembly and welding, automatic glue dispensing and baking equipment, It is worth learning and reference for engineers
-
The equipment for melting and planting nails in the plastic shell of electronic products: the lower part is equipped with a clamp to place the products, and the upper part is equipped with a hot melt head to press down. Its shape is beautiful and smooth, its structure is novel, and it can be modified. The novel shape is a rare masterpiece
-
The detection range of the visual inspection machine for the peripheral dimensions of the product: 28.724 ± 0.05 (FAI23) 25.679 ± 0.05 (FAI25) or more Repetition accuracy: ± 0.0054, 2 ＃ CCD (top part): the camera moves three sections driven by the linear module, detection: 0.00+0.15/- 0 (FAI20), Repetition accuracy: ± 0.005
-
Electronic product lifting, traversing and overturning gripper: electronic products are online through the conveyor line, and can be lifted, traversed and overturned after the front is clamped. The drawing is fine, the structure is novel, and can be modified, which can be used as a reference for mechanical design students
-
The finished electronic products are tested and cut. The appearance is tested by CCD camera. Defective products are eliminated from top to bottom. Good products are sent out from the packaging carrier. The design idea is clear, the machine runs stably and has high reliability. Welcome to download
-
Spot welding equipment for electronic products of continuous conveyor line: conveyor line is set for electronic products, and spot welding multi-point welding is set on the upper part, including digital analog in the middle format. Its shape is beautiful and its curve is smooth, and it adopts the physical representation. Welcome to download and use it, and it cannot be used for commercial purposes
-
Varistor is a kind of resistance device with nonlinear volt ampere characteristics, which is mainly used to embed voltage when the circuit is under overvoltage, absorb excess current to protect the sensitive device. The resistance body material of the varistor is semiconductor, so it is a variety of semiconductor resistors. The production process of the varistor involves the drying process, and it needs to apply a higher temperature to the varistor to dry it. However, currently known devices need to remove the whole cage from the furnace when taking materials, so first reduce the temperature in the furnace to room temperature, The furnace body cannot work continuously. In order to avoid the above problems, we have designed an electronic product resistor
-
-
-
How to complete dust-proof and waterproof sealing of electronic product shell
As many electronic products have many types of styles, users can consider using automatic dispensing machine to complete this special gluing requirement when producing some shells. What is the effect of using automatic dispensing equipment to glue electronic shells? Including whether it can effectively meet the general needs of production or how about the performance of the machine in terms of gluing effect and efficiency? Today, Xiaobian will take you to have a deep understanding of the gluing effect of the equipment.
-
Application of Sealed Dispensing Equipment in Electronic Products
China is a major producer and exporter of electronic products. Electronic manufacturing is mainly distributed in the southeast coastal areas of China, which is also a pillar industry in the coastal areas of China. Because of the abundant labor force in China, the electronic production has taken the lead in the world, and the electronic industry has also made great achievements. However, with the development of electronic and mechanical automation, the speed of manual manufacturing is far from enough to compensate for the underdevelopment of automation, especially in areas with a lack of population, There is an extremely unbalanced phenomenon in the production and development of electronic industry in China.
-
A plastic mold drawing of an electronic product panel, the drawing file format is UG10.0. The mold structure adopts two plate mold, the large water inlet turns to submersible rubber feeding, the side core pulling mechanism has two large sliders, and there are several inclined ejecting molds inside, and the ejecting structure relies on the ejector pin and the ejector sleeve
-
UG11.0 injection mold, the product is an industrial electronic product shell. It adopts the design of two plate dies and four cavities, including slider ejector and other mechanisms. The die design is reasonable and has wide application. The model contains all parameters, which can be edited. Welcome to download and exchange learning
-
The 3d reference for the structural design model of electronic product tablet computer is not particularly complicated, and is very helpful for beginners of electronic product structural design. The actual combat model is worthy of reference. The structure design of electronic products is stacked in detail, and the design of rear shell snap is worth reference
-
Conveying belt for small electronic components: It uses small belts to transport through the aluminum guide rails on both sides. The modeling data in the middle format is smaller and can be modified. Welcome to download and use it
-
What we shared today is the design of a non-standard electronic product tray feeding assembly. This model is the tray feeding mechanism of the German automatic positioner put into production. The design of this model is very detailed. You can use its structure for reference to improve your design. The tray is sent to the designated position through the friction line. Model contains x-t format
-
Semi automatic laser engraving equipment for electronic products. This drawing is a double station laser engraving manipulator used for loading and unloading, automatic material switching, high efficiency, safety and reliability. Laser laser engraving machine is a kind of laser beam used to make permanent marks on the surface of various materials. The effect of marking is to expose deep substances through evaporation of surface substances, or chemical and physical changes of surface substances caused by light energy
-
This design is a design model diagram of an electronic product test rack, which is made of weldments and bakelite materials. The overall structural design of the model diagram drawn by this design is very good. You can download and learn the application of design ideas. It's a good model. Welcome to download and learn
-
1. The overall structure is the main structure, circuit board and two large antennas. 2. The antenna can be rotated to increase beauty and angle, which can increase signal strength. 3. Multiple people can share the network. 4. It can be used in families, dormitories, offices, workshops and other local areas
-
The structure is an electrical component display box, and the external box is a purchased finished waterproof box. The internal display boards are all punched sheet metal parts. The electronic components to be displayed can be arranged on the display board by themselves and fixed by M5 bolts or guide rails. The display board is supported by nitrogen spring as two layers to ensure proper angle. There are STP format files in the file, which are suitable for opening various mechanical software
-
MP3 player design model drawing of electronic products. MP3 is the memory of many people and has been used. It is a revolution from the bulky recorder in the early days to the compact MP3 player. This MP3 player was designed three years ago, small and generous, comfortable to handle
-
Eight position automatic rotation mechanism for electronic products is a divider mechanism. Eight position divider is designed. Each position rotates. The fixture is cylindrical, spring locked, with high precision and accurate positioning. Friends in need can download the reference, without parameters
-
-
Gluing and curing equipment for touch screen of electronic products: It is reproduced by manipulator, scrubbed by scrubbing equipment, and finally coated and cured. Its shape is beautiful and smooth, its structure is novel, and it can be modified. It is a rare masterpiece with novel shape
-
Belt conveying mechanism for small electronic products: the belt line uses aluminum profiles as the main frame, the middle of the belt uses steel plates as the bearing slide, and the belt uses synchronous wheels as the transmission mechanism. Its shape curve is smooth and its shape is novel, which is a rare masterpiece
-
Electronic product cooperation robot unpacking and sealing machine: it is an automatic packaging equipment, which is used to take electronic products out of the box and seal the box. It adopts the technology of cooperative robot, which can realize the function of working with people and improve the production efficiency and safety.
