VIP free A complete set of cad construction drawings (including design instructions and architectural design) for the interior decoration design of a shopping mall supermarket (with a business area of 450 m2)
ten
This drawing is a complete set of CAD construction drawings (including design instructions and architectural design) for the interior decoration design of a shopping mall supermarket (with a business area of 450 square meters); Including: design description, plan layout, front elevation, section, detail drawing, door and window table, ground laying drawing, legend, etc; The design is standard and the content is detailed, which can be used for reference. 1、 The ground elevation of the bottom layer of the project is ± 0.000, and the outdoor ground elevation is ± -0.300. 2、 Foundation works: 1. The strength grade of foundation concrete is C20, and the strength grade of reinforcement is I II. 2. Cushion: C10 plain concrete 100mm thick. 3. Brick base: MU10 machine-made bricks are laid with M10 cement mortar. 4. A 30mm thick 1:2.5 cement mortar moisture-proof course mixed with 3% waterproof agent is set at the elevation of -0.060. 3、 Masonry works: 1200mm high MU10 thick 240 solid wall is built with M5 composite mortar, and the above is the mu5 thick 240 hollow wall with three buckets and one sleeper. 4、 Ground works: 1. Fine aggregate concrete ground, see 98ZF001 ground 9 for details. 5、 Wall skirt works: 1. Interior wall skirt: 1800mm high cement mortar pasted with 200 × 300 white tiles and skirting lines, see skirting 4 on page 22 of 98ZJ001 for details. 6、 Interior wall decoration: composite mortar wall, see 98ZJ001 Interior Wall 5 for details, and apply three coats of external powder porcelain like coating. 7、 Exterior wall decoration: 1. Exterior wall coatings are used for exterior walls. See 98ZJ001 Exterior Wall 23 for details. The color and specification shall be determined by Party A. 2. The inside of gutter is made of 1:2 cement mortar 20mm thick and PVC waterproof roll. 8、 Board bottom decoration: light steel keel frame, gypsum board ceiling, three times of porcelain like coating. 9、 Reinforced concrete works: 1. Concrete C25, rebar φ - grade I, φ - grade II. 2. Door and window lintels shall be selected according to 91EG323. 3. At the junction of column and wall, 2 φ 6 tie bars shall be set every 500mm along the wall height, and each side shall extend into the wall no less than 1000mm. 10、 See 91EG511GWJ14 and GWJ7 XI for details of steel roof truss. The construction area of this project is about 1500 square meters. 12、 Where not detailed, relevant construction and acceptance specifications shall be followed.