-
The 3D proe5.0 original source file design drawing of the tool changing mechanism of the machining center contains many parts, including gears and racks, which is a big design. I hope it will be helpful to you. The assembly is reasonable, and the model is complex. Original drawings and counterfeiting must be investigated
-
-
The vertical machining center with automatic tool changer is suitable for various machining tools required in workpiece processing. Automatic tool change saves tool change time, improves efficiency, avoids waste of machining hours due to manual tool change, and ensures machining accuracy and quality,
-
HAASCM-1 vertical small machining center, X axis is 12.0 inches, Y axis is 10.0 inches, Z axis is 14.0 inches, spindle head to workbench (~max) is 16.8 inches, spindle head to workbench (~min) is 4.8 inches. Model contains common format
-
Haas Vertical Machining Center VF-2SSYT: It is a high-performance ultra speed vertical machining center, providing necessary high spindle speed, fast movement and fast tool change to achieve mass production and shorten cycle time.
-
Vertical machining center: a machining center whose spindle axis is perpendicular to the workbench. It is mainly used to process complex parts such as plates, discs, molds and small shells. The vertical machining center can complete milling, boring, drilling, tapping and thread cutting processes. Compared with the corresponding horizontal machining center, it has simple structure, small floor area and low price. This is an appearance 3D model, which can be used as plant layout materials. Stp file
-
The collecting mechanism comprises a machine body and a collecting mechanism, which is connected with the machine body through a blanking pipe. The collecting mechanism comprises a motor, a first pillar, a second pillar, a conveying pipe, a preloading pipe and a compression box. The conveying pipe is installed at the lower end of the blanking pipe. The conveying pipe is connected with the preloading pipe. The conveying pipe is fixed on the first pillar. The compression box is installed on the lower end of the preloading pipe. The compression box is installed on the second pillar. The motor is installed on the conveying pipe. The inside of the conveying pipe is equipped with spiral blades, which are connected with the motor. The chip collecting mechanism of the vertical machining center is simple in structure, convenient in operation and high in automation. It can distinguish the iron chips from the coolant, and can also separate the iron chips from the coolant
-
This vertical machining center has innovatively developed an external clamping platform, reducing the time for changing clamping apparatus and workpiece, including part drawings and assembly drawings, including parameters, which can be edited
-
VMC1270 machining center is a high-speed, high-precision, high-grade and efficient general automatic metal processing machine tool. The product has mature process means, stable product quality, and the technical indicators and hardware and software configuration are at the domestic advanced level. After the workpiece is clamped once, it can be processed in a variety of processes, such as milling, drilling, boring, reaming, tapping, etc., and is widely used in machinery manufacturing, automobile, mold, aerospace and other industries. The structural design of the modified model is novel, please download for reference
-
Dalian Machine Tool VDL-1000 vertical machining center, SolidWorks 2013 model, can be edited, made according to 1:1, can be used for teaching simulation model, machine tool automation transformation scheme design, welcome to download
-
The model is a vertical NC machining center drilling and milling machine model, which contains the base, column, workbench, tool magazine and other key parts. The model is lifelike. Although it is a file in stp format, all geometric dimensions can be obtained through software measurement, which is very good. Welcome to download
-
NC lathe with vertical upper horizontal tool change: the upper part is equipped with double axes for moving, and multiple tools are placed for processing. The drawing has many details, and the structure is novel, which can be used for modification, and can be used as a reference for mechanical design students
-
The double spindle vertical machining center of Germany Julang Company can process two workpieces at the same time. The attachment is in SW format. It is transferred through Step and can be used in automatic design, simulation and other applications. Welcome to download for reference
-
This machining center is a sheet metal based on the optical mechanical design of Fujian Vino 650 vertical machining center. The machine tool has an X axis travel of 800, a Y axis travel of 500, and a Z axis travel of 550. The system it is equipped with is a Siemens 808D system. The structure is beautiful, durable, and reasonable. You are welcome to download it for reference
-
This drawing is the general drawing of the hydraulic fixture for the automobile exhaust manifold. The fixture is installed on the vertical machining center and mainly processes large surfaces and holes. The fixture is positioned reasonably and accurately. All of the fixtures are clamped by hydraulic cylinders. It has been used in actual production and the effect is very good. Welcome to download
-
The i42US2 model of Taiwan vertical machining center has relatively detailed model details. The base is of casting design, and the model is composed of multiple pieces. At the same time, there is also the tool magazine axis. The model creation effect is realistic, but the model does not contain parameters. Welcome to download
-
Fixtures usually consist of positioning elements (to determine the correct position of the workpiece in the fixture), clamping devices, tool setting guide elements (to determine the relative position of the tool and the workpiece or guide the direction of the tool), indexing devices (to enable the workpiece to complete the processing of several stations in one installation, there are two types of rotary indexing devices and linear moving indexing devices), connecting elements and clamping details (fixture base) 。...
-
The overall dimension of V85 is 2450 * 2535 * 2660 (mm), and the gross weight is 4500 (kg). Numerical control machine tool is the abbreviation of numerical control machine tools, and it is an automatic machine tool equipped with program control system. Numerical control machine tool can better solve the problem of complex, precise, small batch and multi variety parts processing. It is a flexible and efficient automatic machine tool, represents the development direction of modern machine tool control technology, and is a typical electromechanical integration product
-
Vertical machining center refers to the machining center with the spindle axis set vertically with the workbench, which is mainly applicable to machining complex parts such as plates, discs, molds and small shells. The vertical machining center can complete milling, boring, drilling, tapping and thread cutting processes. The vertical machining center is at least three axes and two linkages, which can generally achieve three axes and three linkages. Some can carry out five axis and six axis control. The vertical machining center has limited column height, so the machining range of box type workpieces should be reduced, which is the disadvantage of the vertical machining center. But the vertical machining center is convenient for clamping and positioning the workpiece; The movement track of the cutting tool is easy to observe, and the debugging program is convenient to check and measure
-
Vertical machining center protection model, front manual door opening, and left automatic side door opening are added for robot loading and unloading, so that automatic loading and unloading and manual operation can be achieved at the same time, and automatic/manual production mode can be quickly switched, especially in flexible automatic processing mode, the model cannot be edited
-
Working table size 1700 × 800, T-slot (number size * distance) 5-22 × 140, distance from spindle end face to working table 170~870, maximum load of table top 1500kg, spindle taper hole type BT50, rotating speed 50~8000, driving mode belt drive, X-axis travel 1500, Y-axis travel 800, Z-axis travel 700, X-axis ball screw size 6310, Y-axis ball screw size 6310, Z-axis ball screw specification 5010
-
Worktable size 1360 × 700, T-slot (number size * distance) 5-18 × 152.5, distance from spindle end face to worktable 150~750, maximum load of worktable 1000, spindle taper hole type/installation size BT50/Φ 155, rotational speed 50~8000, drive mode belt drive, X-axis travel 1200, Y-axis travel 700, Z-axis travel 600, X-axis ball screw specification 5010, Y-axis ball screw specification 5010, Z-axis ball screw specification 5010
-
This drawing is a detailed three-dimensional model of the 1890 three-axis hard track light machine. The size of the worktable is 2000 × 900, the T-slot (number size * distance) is 5-22 × 165, the distance between the spindle end face and the worktable is 160~840, the maximum load of the worktable is 1600Kg, the X axis travel is 1800, and the Y axis travel is 900, Z axis travel 680, three-axis hard rail, spindle cone hole type/installation size BT50/Φ 190, download optical mechanical drawing, later you can contact me, I can help design external protection
-
Mazak VTC-20C vertical machining center is modeled by solidworks2015, with parameters that can be edited. The three-axis small drilling and tapping center is equipped with the fourth axis turntable, and the appearance mechanism design can be used for reference to learn the appearance design. If you like, please download and learn. There are STEP format files inside
-
The software works model of the clamping and turnover device for the mold panel processed by the vertical milling machine. The oblique view mainly reflects the solidworks 3D model of the clamping and turnover device for the mold panel processed by the vertical milling machine. A rough view of. An oblique view is a view that projects an object not parallel to the basic projection plane. As shown in the figure, project the "square plate" on the left upper part of the support to the vertical plane of the projection plane, and then rotate the obtained view around the intersection line of the projection plane and the front face until it coincides with the front face to obtain the oblique view "A". The oblique view is usually configured and marked in the form of the directional view, and can also be configured when necessary
-
The slow pressure drive device for CNC horizontal machining center includes a base, a support frame, a first drive component, a horizontal bearing plate, a rotating component, a main shaft, a second drive component and an elastic connection device. The support frame is fixed on the base, the first drive component includes a horizontal bearing plate that can move vertically, and the rotating component includes a rotating main shaft, The second drive component is used to assist the first drive component. The second drive component includes an elastic connection device for vibration absorption. The elastic connection device is connected with the main shaft. The second drive component assists the first drive component to reduce the load of the first drive component and improve the service life
-
Engraving machine machining center pneumatic CNC automatic tool changing spindle: pneumatically operated, with built-in clamping device to fix the tool. Mechanical engineers can make a reference case. The structure is relatively novel, and the intermediate digital analog file is saved. Welcome to download
-
This product is a five axis manipulator designed for machining machines, small parts and small molds. It consists of a mechanical arm, a chassis, a mechanical transmission mechanism, three axes, X, Y, Z movement, a tool changer, a tool, and a marble platform at the bottom.
-
Swiss Mikron vertical five axis linkage machining center UCP800 Heidenhain TNC530 system XYZ800*650*500mm， Feed speed 15m/min, rapid displacement 30m/min, Power 16kw, spindle speed 20000rpm, table size 600 * 600mm, index 0.001 angle 100/+125 ° 30 cutters, machine size 4.3 * 3 * 3
-
Japanese brother drilling and tapping machine tool vertical CNC machining center: it uses sheet metal as the overall shell, and is controlled by the numerical control system. Its shape is beautiful and smooth, its structure is novel, and it can be modified. Its novel shape is a rare masterpiece
-
HAAS VF-4 vertical machining center spindle system: the lower part is equipped with a drive clamping fixture, and the upper part is equipped with a spindle for processing. The drawing has entities, and the drawing has entities. The structure is novel, and the internal structure is clear. Thank you for downloading
-
Vertical machining centers are mainly used in military, aerospace, automotive, mold, instrumentation and other machining industries to process various high-precision, multi process, complex shaped parts. This kind of machine tool can be used for small and medium-sized batch and multi variety production, and can also enter the automatic line for batch production. With the change of the market, the change and update of the products of various professional manufacturers are also accelerating, which requires that the machine tool should also have such functions, and the vertical machining center can just meet such functions. Using this machine tool can save process equipment, shorten the production preparation cycle, ensure the processing quality of parts, and improve production efficiency. In order to meet the market demand, we are now launching
-
The vertical CNC machining center with tool changer and controller has five axes: five axes are set to move, and a reel is set at the front to place parts. The model has a realistic creation effect, and the digital and analog documents in the middle format are saved. It is suitable for more software, without parameters, and can be modified
-
A full set of 3D models of 1370 vertical machining center optical machine, the size of the worktable is 1360 × 700, the T-groove (number size * distance) is 5-18 × 152.5, the distance between the spindle end face and the worktable is 150~750, and the maximum load of the worktable is 1000 kg; Main shaft taper hole type/installation dimension BT50/Φ 155, drive mode belt drive, X axis travel 1300mm, Y axis travel 700mm, Z axis travel 600mm; X-axis ball screw specification 5010, Y-axis ball screw specification 5050, Z-axis ball screw specification 5010
-
Support CNC vertical machining center hydraulic clamp The support CNC vertical machining center hydraulic clamp has only one process. The structure of this hydraulic clamp improves the utilization efficiency and processing efficiency of the machine tool. The hydraulic oil circuit plate is adopted, which has a simple appearance, and is characterized by convenient clamping of parts and stable processing. The hydraulic clamp is designed with clamping error proof function, which can effectively prevent the occurrence of staff operation injury. It can be applied to CNC machining centers with one key start function without clamping and machining programs, and can realize the operation of one person and multiple machines
-
The high-precision spindle combined with ultra precision angular contact ball bearings is designed with high power and high torque to achieve excellent heavy cutting capacity. The latest technology is designed to be the highest level tool changing device in the same level of models, and to achieve the optimization of tool exchange time. The best transfer capacity of the four column structure of the Y axis (F650Plus, F650/50) full axis configuration roller guide rail, can achieve high-precision heavy cutting (F500/50, F650/50) is equipped with the latest Siemens 828D CNC system, can provide rich processing program support (F40
-
In modern life, there are a variety of processing machines. Processing machines make production tools more convenient and faster. According to the development of science and technology, processing machines have multi-function and convenient processing machines. Now, processing machines have the functional characteristics of machining centers and machining center machines. The machining center machines have strong adaptability and flexibility, The machining center machine can facilitate the processing and forming of mold parts and shell parts with complex and difficult to control dimensions. The machining center is a kind of machine that is convenient for processing. The machining center also processes the workpiece by clamping the workpiece. The clamping fixture clamping the workpiece needs to be adjusted. The clamping fixture of the existing machining center machine clamps the workpiece
-
Model: The vertical filter smoke exhaust device AD2455-8 is a revolutionary smoke exhaust system developed by the cutting table; Robot units and any other applications that require hoods. The development of the system takes into account the high limit and portability; And we use our current vertical filtering technology. Portability is largely due to its height and structure; This eliminates the need for pallets for transport and makes it easy to load and unload transport trailers. The slotted outrigger base of the device is convenient for transportation and installation; This makes it easy to locate around various locations in a given building. It is strongly recommended that when welding oily or stamped parts, in addition to the integrated fire
-
The design model of machining center is an automatic processing equipment developed on the basis of general milling machines. The processing technology of the two is basically the same, and the structure is also somewhat similar. NC milling machines can be divided into two categories: without tool magazine and with tool magazine. CNC milling machine with tool magazine is also called machining center
-
The attachment is the schematic diagram of the model of the 10 disc type tool magazine of the vertical machining center, which is applicable to the vertical automatic tool change machine tool and is the main part of its composition. The vertical machining center automatic tool change assembly is used, and the whole group is assembled with 10 knives. It is applicable to the schematic diagram of the scheme and is only for reference
